I'm trying to install Advanced config tool from here:
touchexperience dot com
on my HTC Pure. It installs fine but when I run it there is an error. Do I need to install the .NET compact framework 3.5 to run it? IF so, do I just download .NET Compact Framework 3.5 Redistributable from microsoft and run that on my phone?
Any help is appreciated...I mainly want this to disable the annoying txt sent notification.
Don't install it in the card:
http://www.4shared.com/get/10637497...ssionid=646F48B2C6F798424A8DBA9E4FDFDD3F.dc90
fighter7139 said:
Don't install it in the card:
Click to expand...
Click to collapse
The .NET? you're saying install that on device? Is that would I need to do to get advanced config to work?
Yes. Install it in the device's memory.
OK, Thanks....do I run that through activesync or actually through the phone. I'm not used to exe files on my phone...usually see cabs.
Through phone. If you extract the zip file, you will get a cab.
Related
I just got my XDA II and started installing my software onto it. Noting seems to work! Any software that has more than 1 cab refuses to install, if i look on the device the cab files are there but trying to execute them gives a invalid cab file error - i am installing to SD card, installs to ram seem ok. What am i missing?
maybe your cab files are not for the arm processor?
or not for ppc2003?
it is quite strange for a pocket pc application to have more than 1 cab.
You say they install to ram ok but not to sd card, do the programs work once installed to ram? Many programs have an option when downloading to either have an exe file install or a cab file install, have a look at the sites of the software you are installing to see if that option exists for the programs you are trying to install.
ok, to clarify..Dispite the low number of posts i'm not a newbie - been using and developing for ppc for years...The software all installed ok on my ipaqs(3970 + 5450) both with XScale both with WM2003. I am using activesync 3.7.1, and am leaning towards that being the problem, any thoughts?
you don't need activesync to install cabs. if you copy the CAB to your ppc,
and then click on it in the pocket-file explorer, it should install too.
I'm not trying to install cabs. On my pc i click the install program. That launches add/remove programs in activesync, that copies over the cab files to the ppc which are then executed. If install fails they are not removed. that is how i know they are there.
What programs are you trying to install?
based on a post at pocketpcthoughts in august 2003 i changed my todat theme back to windows default - and guess what - no more install problems! no more directory corruption- should i return my device?
i've downloaded a program, it said that i have to upgrade my .NET framework to ver 1.0 SP2.
i've downloaded the .net framework files. but the files in unrecognized by my pda xdaII?
somebody plz tell me why is this occurs?
i also have problem with cab files. my computer and pda don't recognize the file format? why?
thanks
can anybody pls tel me how i can make a cab file which wont show up in the remove programs list when i install the particular cab file.. am using wince cab manager 1.1 to create cab files.. thanx in advanced
No way.
You need WinCE CAB manager 1.4 or CabWiz from Visual Studio 2005.
wat do u mean wince cab manager 1.4? :? i have 1.1.0.4 installed, and it seems the latest frm the website.. and as for, cabwiz, where can i get it? and can u pls tel me how to create the cab file the way i want, am just a newbie..
CAB manager 1.4 is not available from website. Ask them for support.
CabWiz:
just execute: cabwiz YourInfFile.inf /nouninstall
I have access the to the files through WINRAR and can change the pics with Minila Editor. But How does one package them for install through a .cab file?
i hav downloaded packages_creator5.exe and also have the msceint.exe file in the same folder as i installed the ervius program, but how on earth does one put it together to work?
Please teach me?
Well there are a few ways to create .cab files but one quick method would be to use a program called QuickCab... Very easy to use it walks you though the process, makes life a whole lot easier if you are new to it.
go here ---> http://forum.xda-developers.com/showthread.php?t=400221
ProphecyXR said:
Well there are a few ways to create .cab files but one quick method would be to use a program called QuickCab... Very easy to use it walks you though the process, makes life a whole lot easier if you are new to it.
go here ---> http://forum.xda-developers.com/showthread.php?t=400221
Click to expand...
Click to collapse
looks promising, thanks, BUT, only that it says "cannot find Cab file, here it is the output from CabWiz:
Windows CE CAB Wizard
Error: Section [DefultInstall] key "CESetupDLL" - file "setup.xml is not a DLL so cannot be used as the special Setup.DLL"
solution? what did i do wrong?
went through installation it but no difference is made, it did not show the 'restart device' either. what is the 'setup.dll file for, where do i find such a file or what are the settings ?
HTCDiamond22 said:
went through installation it but no difference is made, it did not show the 'restart device' either. what is the 'setup.dll file for, where do i find such a file or what are the settings ?
Click to expand...
Click to collapse
hmm...
So you are trying to package some manila files to a cab file, so that you can install it on the phone.. right?
start QuickCab
Enter Application Name and Author(you)...
Don't check 'use custom setup.dll
Next->
Chose witch files to have in the cab ( Add-> ) to windows dir
Next->
No registry edit!
Create...
This works fine for me...
and about the 'restart device'... I don't know how to set it... on some cabs it says it ond on some it dont..
NisseDILLIGAF said:
hmm...
So you are trying to package some manila files to a cab file, so that you can install it on the phone.. right?
start QuickCab
Enter Application Name and Author(you)...
Don't check 'use custom setup.dll
Next->
Chose witch files to have in the cab ( Add-> ) to windows dir
Next->
No registry edit!
Create...
This works fine for me...
and about the 'restart device'... I don't know how to set it... on some cabs it says it ond on some it dont..
Click to expand...
Click to collapse
I've done that but it still does not work, I think that it may be the files i selected, should one only place in the files as showed in manilla?
no extra files to be added?
HTCDiamond22 said:
I've done that but it still does not work, I think that it may be the files i selected, should one only place in the files as showed in manilla?
no extra files to be added?
Click to expand...
Click to collapse
ok... where does it go wrong? on your computer or on the phone?
because you first say that Cabwiz is giving you an error and then you say that you cant install on the phone?
If it doesn't say that you have to restart our phone... just restart it yourself
...and you have .Net Framework 2.0? (on your computer)
NisseDILLIGAF said:
ok... where does it go wrong? on your computer or on the phone?
because you first say that Cabwiz is giving you an error and then you say that you cant install on the phone?
If it doesn't say that you have to restart our phone... just restart it yourself
...and you have .Net Framework 2.0? (on your computer)
Click to expand...
Click to collapse
.Net 3.5
I've uninstalled all the clocks and have restarted, going to try again
I've uploaded the file, does it work?
restarted device and reinstalled. still not working
aha .. ok.. now I see your problem...
You can't extract the files directly from a cab file with ex. winrar....
They will end up like this ... '4E6705~1.002'
use package-creator-v2.7 if you want to extract the files from a cab...
you can find it here...
http://forum.xda-developers.com/showthread.php?t=388883
Just run that and press 'Open Cab file'
i have been trying to install netcfv3.5 and it says that a newer versoin is installed. torun games and certain apps such as zenonia and bsb tweaks i need to install that framework. if i uninstall the framework i have installed will all my programs run correctly and second how do i unistall it.
napoleontheruler said:
i have been trying to install netcfv3.5 and it says that a newer versoin is installed. torun games and certain apps such as zenonia and bsb tweaks i need to install that framework. if i uninstall the framework i have installed will all my programs run correctly and second how do i unistall it.
Click to expand...
Click to collapse
Then it means you don't need it...just install your cabs
secano said:
Then it means you don't need it...just install your cabs
Click to expand...
Click to collapse
to play zenonia and run bsb tweaks i do or is there an update cab file that will work on the framework i have.
napoleontheruler said:
to play zenonia and run bsb tweaks i do or is there an update cab file that will work on the framework i have.
Click to expand...
Click to collapse
You should be fine, go ahead and install them.
how do i install files in a folder and out of the folder is registry file? help
how do i install files in a folder and out of the folder is registry file?
when i down load a file. some of them come not as a cab file but it comes it contains a folder and a registry file out of the folder. i believe folder contains program file. where do i put which and where? can u help.