Has anyone used their JasJam as a USB Modem?
I can use mine only once each time before a hard reset is necessary. It works fine for the first use and thereafter the PC doesn't detect the device as a modem with wireless modem started.
I have tried several resets and two separate computers.
I have the imate ROM 1.20.305.3.
I guess no-one else has this problem?
Hi
I have the same problem with usb, but it is worked fine with Ired port.
any solution please
Instead of resetting the device, I just go into Comm Manager, and turn off/turn on the cel phone part of the PDA. I sometimes need to do that when it has trouble establishing an EDGE data connection, too.
I found that Jasjam usb modem is working fine only on Xp, but on 2000 there is a bug.
After I upgraded to radio 1.16 on my 8525, I found that after disconnecting from the data network, I canot reconnect. Only was to solve this was a soft reset. Now I have upgraded to 1.20, and now after i activesync with my PC, I cannot reconnect to the data network either. It has done this with two different radio versions...should I downgrade to 1.13? What did the 8525 come with preinstalled? It connects quickly the first time after a reset, and when trying to reconnect it only tries for half a second and says "the modem has disconnected, or dismissed"
Thanks for the help!
The only way that I could fix it was to reflash the rom, downgrade the bootloader and reflash the radio
Hello,
I am unable to connect with my TYTN to any wifi network, secured/unsecured. After turning wifi on (in comm manager), those lines near wifi icon (indicating that device is searching for wifi networks) appears just for 1sec, and then disappears. And that is all...
Please is there any known solution or is my wifi really dead?
My ROM: Schap's 4.31 (I already tried different ROM without any luck)
My Radio: 1.50.00.00
Thank for any answer...
Does your MAC address show ok? It may be worth having a look at this thread.
http://forum.xda-developers.com/showthread.php?t=322225
many thanks, but my TYTN is now bricketized :-(
downgrading to SPL 1.10 ok, but
while downgrading SPL (to 1.04), after message of succesfully flash on PC screen - PDA display turned off and my TYTN stops responding completely...
authorized service is my only last chance...
Sorry to hear it bricked. You could try this which has been recommended by another member before.
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
here
VC_48 said:
Hello,
I am unable to connect with my TYTN to any wifi network, secured/unsecured. After turning wifi on (in comm manager), those lines near wifi icon (indicating that device is searching for wifi networks) appears just for 1sec, and then disappears. And that is all...
Please is there any known solution or is my wifi really dead?
My ROM: Schap's 4.31 (I already tried different ROM without any luck)
My Radio: 1.50.00.00
Thank for any answer...
Click to expand...
Click to collapse
dont know if you already installed these ?
i hope it helps for you..
Pinguin666 said:
dont know if you already installed these ?
i hope it helps for you..
Click to expand...
Click to collapse
What does that .cab do?
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
This should correct the missing WiFi issue: http://forum.xda-developers.com/showpost.php?p=3791117&postcount=191
Hi Kiemlo
Unfortunately the key is 1 already
I try change key to 0 but results is wifi missing still
Any idea ?
Thx
what happened to cause it to be missing?
did you flash the phone witha new ROM? install a program recently?
Have yuo tried doing a FULL backup then a hard reset?
Yes I think that wifi just disappear after some ROM flashing.
But I try to flash all ROMs which I have before and WIFI not appear again in no one ROM.
I try hard reset without backup(by the menu factory reset and by voice comm+power+reset) with same result - wifi missing.
Hi,
My current rom removes wifi from the list when its connected to usb or activesync. When I unplug it automatically goes back to the state it was before, either powered off or on_and_connected!
Also, use radio rom 0.89, with 0.88 and 6.5 i had no wifi, it was present in the list but could not see any SSID's.
Cheers,
Balint
Yes I know wifi can´t activate (grey text) when its plugged to USB.
But in my case don´t matter if its plugged or unplugged - WIFI option is missing(not only with grey text)
radio is 0.89 and OS is 6.5 so there is something else broken
Not that this would help much, but I had a similar issue with my 914c while using HP's default OEM 6.1 software. The Wi-Fi used to vanish from the Comm. Manager every so often. For what it's worth, a couple of soft-resets would fix the problem sooner or later (for me, anyway). I'm using Montecristo's 6.5 now and haven't had the problem since.
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
bluejay23 said:
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
Click to expand...
Click to collapse
I usually run into the same problem after ROM updates. Switch it off, remove the battery for a minute, insert the battery back in and hard reset fixes it always.
Regards
Flash original ROM with downgrading radio to 0.88
Sergious: unfortunately - this wouldn´t help.
even if yes, I can´t stand original ROM
I´m going to try Montecristo ROM
Best regards
Not working WiFi is a radio problem, not ROM. Link that i gave will downgrade your radio to 0.88, then you can flash any rom
PS. Montecristo ROM ?? It is for 914...
oh I miss that so next flashing will be with keyx roms still
I will try some flash and resets by the night ...
what goes around comes around
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
bluejay23 said:
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
Click to expand...
Click to collapse
I had the same problem with 23001 Beta 13.2 WWE, the WiFi was initially disappear from my Wireless Manager, then i change this : my network card connects to - The Internet (default is work), and the WiFi is now again show in Wireless Manager, but can not switch on, so after soft reset it works ok...
Zemun_PFC : thanks you for your advice - its so close to solve my issue.
I did what you say and
1) after soft restart BLUE LED blinking(means some wireless active - BT was off before restart so I suggest WIFI will be working) BUT
2) when i go to SETTINGS/CONNECTIONS/COMM MANNAGER and click on wifi -> waiting icon then nothing happened - STILL only TURN ON - BUT SHOULD BE ON already => so on/off trigger doesnt work
3!!) when I´m in COMM MANAGER and click on SETTINGS in bottom right corner I see WIRELESS LAN - this not happened before!!
4 when I´m click on it it show only BLUETOOTH and PHONE settings :/
You helped me a few with it
I must solve it
bluejay23 said:
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
Click to expand...
Click to collapse
some of my roms (older version) had a issue when you use a2dp and turn off bt. Restart then device.exe will take most of the cpu
Keyx : yes you are right - I flash another one from you, now is device.exe issue cleared.
i have a carbon rom . when i connected to wifi network the network dont acces to web and i need to restart wifi.
i see fix and flash it and it doesnt help.
thanks