Ok, I have been browsing this forum for a solution to my problem and none seem too specific, at least for my BA wm6.
Here is the problem: I just received a dual sim adapter (the one that needs cutting) -both sims work fine. I can't get them to switch from one sim to the other from my phone. power on/off and flight mode won't do it either. I tried phone alarm, dual sim switcher, and wivit. They don't work for my phone. I also have a wm2003 se BA and tried it on there and I was only to get the dual sim to switch once. So now the dual sim is stuck on SIM2. So it doesn't matter which phone I use I can only use the sim that is on the SIM 2 slot! Blah!!
What I need: A program, or anything to switch my SIMs for my BA wm6. I don't want to keep taking out my sim and open the sim adapter and switch the two sims all the time.
Edit: after fooling around with my 2003se BA I managed to get the Dual Sim Manager to work again, and I noticed that despite switching SIMS, phone information alway display the default SIM. Does this mean that it is not switching? Does this mean that it does switch but the phone does not display it? If latter is the case then I am in big trouble! One SIM has unlimited internet and texting and other one is just a basic plan. Please help! I don't want a surprise bill!
Edit: Sorry, I needed an answer so I'm feverishly testing this crap out. And the answer is yes the sim changes but the phone does not display so. The trick I used is texting my account info and voila! Two different accounts! So, now over to my wm6 BA and check that out
I'm really surprised, that people are so patient to fight with such an uneffective and clumsy device as dual SIM adapter: you have to cut/destroy those SIM cards, then you have to pray that i works with your phone...
I really think, that if you really need to use 2 SIMcards, why not buying a 2nd phone, or just a special phone with 2 radios and for 2 SIMs.
And please don't tell me it's "for comfort" - dualSIM is antiComfort...
There are other solutions that you don't need to cut the sim, one that I have seen is the addapter is placed in the sim slot and the simm are part of the battery pack.
Bottom line is that that one sucks as well.
I feel there is a valid need in my line of work were I would need at least 3 laptops to support the Builds of my customers however VMWare gets me by fine.
As for the phone, I need 2, carry 2 and hate it.
So I would be a buyer if there was anything around worth having. (which as I still have a BA seems not the case).
Dual Sim Problem
Hi pharmeceutikle,
I wonder how this device works for BA at all!
I tried an adapter like yours of a friend of mine and it just doesn't work with my BA.After inserted, I don't see any new menu for it and when I restart the BA, it shows invalid sim message at startup. I have installed a WM6.1 ROM downloaded at this site [20749 (Build 20749.1.4.0 PV DVH) - v13] and my radio version is 1.12 (by the way, it was 1.15 but 1.12 is the only one that worked fine for my device). The same adapter, once installed on a Motorola phone of my friend works pretty fine! so, it's not a problem with the adapter, I guess...
Did you change anything on registry? could you please tell me how did you proceed since cutting the sims until you got it to work, please?
Many thanks!
JFLB said:
Hi pharmeceutikle,
I wonder how this device works for BA at all!
I tried an adapter like yours of a friend of mine and it just doesn't work with my BA.After inserted, I don't see any new menu for it and when I restart the BA, it shows invalid sim message at startup. I have installed a WM6.1 ROM downloaded at this site [20749 (Build 20749.1.4.0 PV DVH) - v13] and my radio version is 1.12 (by the way, it was 1.15 but 1.12 is the only one that worked fine for my device). The same adapter, once installed on a Motorola phone of my friend works pretty fine! so, it's not a problem with the adapter, I guess...
Did you change anything on registry? could you please tell me how did you proceed since cutting the sims until you got it to work, please?
Many thanks!
Click to expand...
Click to collapse
This dual sim adapter only works if you have a working STK ROMs. I believe I used Helmi's original wm6 as one of them and then I went to others but I can't quite remember which. I posted an experiment with the all the ROMS I used awhile ago so just do a search under my name. Anyways, I couldn't get it to switch sims normally so I had to reset the damn thing all the time. I would go to the STK menu and choose either sim 1 or 2 and then quit out and then reset my phone for it to make the change which really is a pain. As soon as my second sim ran out I just tossed the infernal thing and stuck one sim per phone! Sorry couldn't be much more of a help.
Thanks
Thanks anyway I'll keep searching for a while.
Ok ive had the P3050 Vogue 100 touch for a while now.
I bought a used Sprint MP6900SP Vogu100 and kinda working - broken touch screen - everything else seems to work.
But my question is can i flash it with a telus rom?
I bought it so i can mess with the windows without wrecking mine.
Or is there a generic rom?
And another question is that it doesnt seem to be able to have a sim card put in, does this mean its locked to Sprint?
CDMA phones are locked to the provider, there is no way around it as the carriers register the Serial numbers and if it isn't in their system they won't add it for you.
As for roms, just grab the telus rom from the htc website, otherwise check the upgrades forum.
Should have done your homework re: switching it onto Telus.
Thanx for the info, tried searching "switching it onto Telus" but could not find anything.
I also bought a new touch screen and its not as clear as the original, do you know if it will clear up or will it stay that way?
And I put my touch screen on the Sprint and everything works on it but the Sprint will not accept anything bigger that a 512 mb microsd card the 1 gb card from my telus doesnt work in the Sprint either but worked in the Telus, is there a problem with the Sprint phones (and i flashed the latest Sprint rom on it)?
I bought a 8 gb microsd for my Telus and works fine.
Thanx D
Ok i think I fixed the microsd problem. - posted a new thread for that.
And i tried searching for fuzzy touch screen and cloudy digitizer and no luck.
Hello all, I bought a used HD2 off CL (USA), hoping to unlock it (if locked) and use it with my ATT prepaid sim.
Outwardly, the phone looks fine and everything about it works quite nicely, EXCEPT that when I insert my SIM card and start the phone, it shows me an exclamation mark on the antenna icon. When I disable all wireless connections and then re-enable it, the icon now changes to the SIM card icon with an 'x' next to it, and I am shown a screen with a keypad and the following message: 'The SIM card is missing. You can still make emergency calls if your service provider supports it.'
Thinking it was a ROM issue, I successfully loaded the latest ROM from [showthread.php?t=789506] but it did not resolve the issue. There is no issue with the SIM because it works nicely with my AT&T Samsung a607. There are no signal strength issues either.
Please help!
Can someone please provide some insight on my situation? I hope I haven't posted in the wrong forum; if so, mods may move it to the appropriate place.
Any advice on diagnosing the issue will be appreciated; I don't even know why the phone is acting the way it is. Many thanks!
Wait a moment, so your device isnt already SIM unlocked? Sounds to me like you need to go ahead and get an unlock code for it, then navigate to the \Windows folder and hit up the program called "simlock.exe" and input your unlock code, then try your ATT SIM again.
Thanks much for the reply. Other phones usually prompt for a SIM unlock code by themselves... why doesn't this one?
Running simlock.exe from Windows does give me the message "Network is locked, please input unlock code". Before I buy the code, I want to make sure that there's nothing physically wrong with the phone. It should give me at least *some* sign that my SIM is being recognized, but rejected due to network-locking, no?
Thanks again!
See thats the thing. With a foreign SIM card in the device, IF LOCKED, simlock.exe should run automatically on startup and ask for the code....so honestly I do not know if your device is messed up somehow, or if its just being wonky for the sake of being wonky. Perhaps you might want to flash a new Radio ROM and see if it then recognizes your SIM. BE SURE to NOT flash one with .51 in its name.
Thanks again. Can you point to a thread with detailed instructions for flashing a new radio ROM for my device? I found many threads while searching and I am confused. I don't want to choose the wrong instructions and brick this device; I haven't done anything of this sort before.
Look at the top of these forums for a stickie by Snarksneeze that will teach you everything you need to know.
Hi again... I don't have a spare 8GB MicroSD card lying around. Is there any way I can do this flashing over USB? I did read that there's a risk associated with flashing over USB (cable yanks, power loss, etc.) but I did flash the newest ROM without any issue, and hopefully I can do the same for the new Radio ROM.
The Radio version shown in the 'About Phone' section is 2.14.50.04, btw.
You can use your 16GB that came with the phone, or any other one for that matter. That requirement is more of a recomendation really. I have flashed with my stock 16GB many times. And yes, you can do it via USB aswell.
OK, so I have more information about the problem. I got the phone unlocked (I heartily recommend 'fastunlocker' on eBay) thinking that it would solve the issue... but it didn't. But, on a lark, I tried my friend's post-paid T-Mobile SIM in the HD2 and it worked! My AT&T pre-paid SIM does not... can this be a problem? The damn thing works nicely in other (unlocked) phones.
Is anyone else successfully using a AT&T GoPhone (prepaid) SIM on a TMOUS HTC HD2?
It may very well be the problem then. I have heard that some phones are incompatible with pre-paid SIMs.
God, that would suck donkeyballs. Can someone confirm that an unlocked TMOUS HD2 does not work with AT&T GoPhone prepaid SIMs?
had this same exact issue and realized that one of the pins in the sim card reader was stuck in the down position. I poked it with a small screwdriver and it popped back into place. works like a charm now.
Thanks for the reply. Are you sure this is the issue? As I mentioned in a previous post in this thread, my friend's T-Mobile SIM works nicely with the phone.
EDIT: Also, are you using it with an AT&T GoPhone SIM?
Bump... anyone?
Final bump: maybe I am SOL. :'(
Is anyone successfully using a TMOUS HD2 with an AT&T Prepaid (GoPhone) SIM?
Give it some time. Sometimes threads at XDA stay dormant for months and then suddenly BAM! a breakthrough happens.
I would say its your sim. How old is it?
I had the exact same problem. I bought a HD2 off cl and put my sim in and got the no sim message and exclamation point. I was using a sim from the voicesteam days but guess what it worked just fine in the Nexus one I had just gotten so I figured it had to be the phone. I finally used a friends sim and it worked fine. So I would turn the phone off in settings then slip his sim out with the battery still in and put my sim in and turn the phone back on. Guess what, it would work for about 10 min then it would suddenly go back to no sim message. So I went and got a new sim from T-Mobile and walla works like a charm. So try what I did and if you end up with the same problem try a new sim from AT&T. I don't know what is different about the HD2 but there something about the older sims that it doesn't like.
Hope that helps!
Hey... thanks for ther reply! My SIM is brand new (about two weeks old). I will however go to the AT&T store and get it replaced to see if it fixes the problem. Thanks again, I appreciate it.
Dear look my problem...
ashasaur said:
Wait a moment, so your device isnt already SIM unlocked? Sounds to me like you need to go ahead and get an unlock code for it, then navigate to the \Windows folder and hit up the program called "simlock.exe" and input your unlock code, then try your ATT SIM again.
Click to expand...
Click to collapse
-----------
I have a HTC HD2 working excellent with my card. Some day i received message : card is missing ....like you.
But restarting 2-3 times all ok. In a week the same problem again here.
Now i cant make a call. The same card in another hd2 works good. Any other card in MINE phone is missing...
Please help me.
Many thanks
[email protected]
I currently have an HD2 running android from nand in the usa, and I use Family Mobile prepaid service (walmart subsidized but still tmo technically) since i got the phone just to get it going. This worked fine with my carrier locked phone, and now that I know I can get better coverage and a better data plan through AT&T I got an unlock code for my IMEI to sign up under their service.
I have a prepaid at&t sim from another number, but when I boot the phone with it in, it just says insert sim... it doesn't ask for the unlock code.
Through searching, I learned that I can run simlock.exe from winmo 6.5 to input the code, but doing a task 29 just to run one program seems sketchy, but it shouldn't affect my carrier unlocking when I restore my rom, correct?
How do I input my lock code? Is flashing a stock rom the only way? Is that an acceptable way? Should I stick the sim in while running winmo 6.5?
Thanks for your help ahead of time and I hope this helps anyone else wanting to unlock their phones if they are reading this.
Hi, guys.
I have a Vodafone-locked HTC 7 Trophy.
My N1 is going to be repaired so I wanna use the trophy while it does. My operator is Simyo so I can't use my sim with the phone... looking for a way to use my non-vodafone sim with HTC Trophy I'm very confused...
Here, in Spain, we call "liberar" (literally "set free") to the process which lets your mobile uses any sim card, how call you this in English? Unlock? Unbrand?
Thank you!
Hi.
AFAIK unlocking means using the phone with any Sim Card - which would be "liberar" as you call it.
Unbranding is the process where you remove all the settings, or operator logos your phone came with.
Of course unlocking can also mean, jailbreak the phone, so you can sideload apps etc.
But in general I'd consider unlocking removing the Sim Lock.
Correct me if I'm wrong