Hello,
I'm running wm6.1 and all of a sudden a number of excel files cannot be opened showing the error message "An error occurred reading 'file name' because the file format is not recognized".
Some files have xls extension and others are xlsx??
The rom is standard and I'm running Blackberry Connect.
Have tried a soft reset, can anyone help?
Mark
Related
Hello all, I took the bull by the horns this morning and upgraded my PPCPE to 4.00.16 ENT T-Mobile US from JSummers ROM Kitchen.. I used the EXE installer and everything works fine.. I did have to upgrade form Activesync 3.6 to 3.7 once the upgrade was done..
Tonight I decided on trying some new options from the kitchen and downloaded a new EXE.. (still 4.00.16) just with EzWap2 this time..
But the EXE installer won't see the PPC anymore, even though active sync sees it and it syncs just fine. A DOS window comes up and says "ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connectiontype." The installer window still shows up though.. When I click next to install I get a windows popup box that says "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR - Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected." When I try again I get another dos window that says "ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host. Error getting devicedata".
Am I doing something wrong here?? I've tried the SD method but apparently my SD card writer/reader isn't compatible with XDArit and it writes sucessfully but won't read the card back and the PPC doesn't recognize it as valid..
Help!
:shock: Have you read small notes beside the rom version which tell you to be very carefull before using rom 4.00.16. The notes telling you that after you flash with that rom version will unavailable to reflashing or downgrading with other rom version. Sorry, only this far I could help you cause I'm still a newbie to.
You can go back to a different ROM or the same with more stuff like your situation. BUT you HAVE to do it the SD card way. Search the forum and you will find more info about this. (SD card method)
I have tried to install an upgrade for my xdaII. Unfortunately it was UK upgrade I started to install into my Asian xdaII. Halfway through the installation there was a ROM version error and it has rejected installation.
Now there isn't any software or an operating system in my pocketpc. There is no way I can sync this with my pc for the installation of the correct version.
Can anyone help?
there is this guide
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
you can extract the nk.nbf file from the UK upgrade and use xdanbftool.exe to modify the language ID then re-flash your device.
In your case, you should have a frozen dimmed screen with the word "Serial" on top and the boot loader version towards the bottom of the screen ... if by inserting the device into the cradle the word Serial changes to USB, this means the boot loader is still in function.
Good luck
I did modify nbf headers using xda2nbftool and changed device type, operator and language but still getting following error message:
"ERROR 102: CE Image file checksum error"
"The ROM image file to be used for the update is corrupt. Download correct ROM update and try again"
I did modify nbf headers using xda2nbftool and changed device type, operator and language but still getting following error message:
"ERROR 102: CE Image file checksum error"
"The ROM image file to be used for the update is corrupt. Download correct ROM update and try again"
Can you please help!
Isn't there anyone who can help me soon???
I've recieved a QTEK9100 (HTC Wizard) from my employer. The ROM-version is 2.18.7.4 NOR.
This unit seems to be application locked in some way.
Among other things, I have tried to install two different sharewhare GPS-programs on this unit (PTGMAP and OZIExplorer). When installing or running the .exe files i get error messages like:
- "Cannot open the file PTGMAP. It either lacks a signed certificate or cannot find one of the components" (my translation).
- ".. can not be installed because it does not have a digitally signed certificate" (also my translation)
- or simply "cannot be installed"
I've searched this forum and quite a few others, but I have not been able to find a solution. I've found some .cab files, but these have been for other units that the QTEK 9100/HTC Wizard. I was even able to install this one, but it seems to have made no difference:
ftp://[email protected]/Universal/Extended_ROMs/Default_Signed_DisableSecurity.CAB
(I do realise this is for another unit)
I've also tried SignCode - It's says that the executable is certified, but I still get the same error message when I try to run the programe.
Finally, because my ROM has been configured (by an external supplier) with Pylon Anywhere for syncronization, I guess I can't install another ROM, as I will lose this software which I need.
Can anyone help me here? --- Please!?! ---
Try this reg tweak
Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM\Security\Policies\Policies\0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM\Security\Policies\Policies\0000101a = 0 (DWORD decimal)
Registry editor
but... I've tried to install the registry wizard:
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
But I get the same error-message "cannot install RegistryWizard_PPC_ARMV4.cab"..
Any ideas?
Copy this exe to your device via activesync and click on file through file explorer. It is a registry editor and go to those keys i described.
Still doesn't work
I've tried this in every possible way now:
- I've copied the file to my "mobile unit" in windows explorer with ActiveSync running.
- I've put the file in the file-sync and synced.
- I've copied the file to my storage-card using a card-reader.
... Everytime I try to run the file, I still get the message "Cannot open regedit_463. It is either not signed with a signed certificate and so on..."
I am considering a ROm-update, but if I install a new ROM, I'll lose all the syncronization software from my employer, right?
Any futher help is greatly appreciated! Thanks!
Re: Still doesn't work
kloksa said:
I've tried this in every possible way now:
- I've copied the file to my "mobile unit" in windows explorer with ActiveSync running.
- I've put the file in the file-sync and synced.
- I've copied the file to my storage-card using a card-reader.
... Everytime I try to run the file, I still get the message "Cannot open regedit_463. It is either not signed with a signed certificate and so on..."
I am considering a ROm-update, but if I install a new ROM, I'll lose all the syncronization software from my employer, right?
Any futher help is greatly appreciated! Thanks!
Click to expand...
Click to collapse
Try the above file in main memory - take your storage card out and soft reset. Then click on the file again - sometimes it is a corrupt storage card that causes that error. Otherwise its some software thats caused this security error and you will need to hard reset or update rom. Yes you would have to reinstall all your software.
Hi,
Can anyone tell me where I might find a copy of system_sr.cab file?
Am getting the below error -
"An error message cannot be displayed because an optional resource assembly containing it cannot be found"
All the forums and web pages I can find point to this cab file as a fix to the problem which relates to issues with either the SQLCE or .NET2 cab file required to run a 3rd party piece of software.
Get the error when trying to connect to a Vodafone corporate APN.
Cheers,
Paul.
hello.
After enable wm5storage on the phone can not copy large files (over 3-4 MB) in the PC gives me the error "cannot copy Basshunter - Jingle Bells: Data error (cyclic redundancy check)". (I tried to copy other files)
How can I get rid of this problem?
I restarted the phone but still do the same.
thanks.