Database Users

HSPDA Confusion!

Hi everyone,
It's my first post here - most likely not to be my last. Oh, and i know i spelt HSDPA wrong in the title!
I very very recently (yesterday in fact) managed to get hold of my T-Mobile Hermes (one of the .37 batch) and am having no problems whatsoever with the phone, the only problem i am having is getting any web download speeds faster than around 40kbps?
I phoned T-Mobile yesterday and after being on hold twice and explaining myself many times i think i got HSDPA enabled as the lady (who was very nice) said she promises it has been enabled for me. I tried half hour later and sure enough, i used www.dslreports.com/mspeed and could now download at around 800kbps - perfect! Unfortunately i tried again this morning and it says 40kbps again
Is there any way to tell whether HSDPA has been enabled on my phone before i call T-Mobile again? Does HSDPA just run over 3G? I haven't got a brilliant signal where i am - usually 1 or 2 bars, could this be what is affecting my download speed? I need some help!

Just realised i have spelt HSDPA wrong in the thread title - never mind! Can anyone help?

Have you read this dude?
http://forum.xda-developers.com/showthread.php?t=276154&page=5
Theres a couple of files you can check you have i believe, also the Fit4cat program is worth downloading.

40kbps is GPRS data speed. Even without HSDPA you should get 300kbps on UMTS.
Your phone will show a U or a G depending on which network you are on.

It shows a "G" all the time in a little white block next to the signal bar, and sometimes the signal bar shows an antenna and sometimes a "G" also - does that mean when im on the "G" ill be on HSDPA and when im on the antenna (if i cant get 3G) ill be on GPRS 40kbps?
If so that makes a lot of sense as the signal is not brilliant round here, i went shopping in a much bigger town this afternoon and tested again -> full signal and downloading at around 1200kbps! Obviously it is enabled, think its just down to my signal....
Does that sound about right?

RTFM, the G is for GSM ie data will be GPRS.
You will either have a 3G or U depending on what ROM you're running for 3G/UMTS/HSDPA .

I'll be honest i only got half way through the quick start guide before i started playing with it. So, if my phone is always on "G" i'll assume i need to try and unlock it using the fit4cat thing? As T-Mobile have said they have enabled HSDPA on my account?
How did i get 1200kbps on GPRS by the way? It definately said "G" when i was connected and did the speed test...?!

I just ran the fit4cat Hermes tweaker and still no luck, it only connects to "G" rather than "3G", 3G is apparently available in this area so why does it only connect to G? Im confused and would really appreciate some advice...

Well if you probably didn't notice the U (or whatever) when you got 1mbps once it. This means that HSDPA is enabled on your phone and SIM.
The fit4cat tweaker only (dis)enables HSDPA but that isn't an issue because even without HSDPA you would be getting UMTS speeds.
One thing you could try is. Go to Start->Settings->Phone->Band set GSM/UTMS to GSM900+1800 + UMTS2100
You could also try a manual search for networks from Start->Settings->Phone->Networks->Find Network
Finally you can also disable GSM totaly using network type in the band selection and see if you get a steady 3G signal.

Thanks for your suggestions, here are my findings:
kevino said:
Well if you probably didn't notice the U (or whatever) when you got 1mbps once it. This means that HSDPA is enabled on your phone and SIM.
Click to expand...
Click to collapse
Good point, i have a long drive home tonight so will check when going through built up areas to see if it connects to 3G or U then.
kevino said:
One thing you could try is. Go to Start->Settings->Phone->Band set GSM/UTMS to GSM900+1800 + UMTS2100
Click to expand...
Click to collapse
Tried this, and phone disconnected then reconnected but still said "G" when connecting to Internet. Set back to "Auto".
kevino said:
You could also try a manual search for networks from Start->Settings->Phone->Networks->Find Network
Click to expand...
Click to collapse
Did this also, it pops up with the message "Registering on the network" and disappears and thats it, nothing happens.
kevino said:
Finally you can also disable GSM totaly using network type in the band selection and see if you get a steady 3G signal.
Click to expand...
Click to collapse
I cannot find an option to disable GSM in the Band tab, i have the following:
Select your network type.
__Auto
__GSM
Select your GSM/UMTS band.
__GSM(900+1800)+UMTS(2100)
__GSM(1900+850)+UMTS(1900+850)
and thats about it. Cannot find anything that would let me not use GSM whatsoever? I appreciate your help so far

It may be the case that your reception for 3G just isnt adequate enough to work where you live, O2 states there is reception in the area where i live but i only tend to get UMTS upstairs....just one of those things....here at uni i get FULL UMTS reception anywhere.

richieboy said:
I cannot find an option to disable GSM in the Band tab, i have the following:
Select your network type.
__Auto
__GSM
Click to expand...
Click to collapse
In the dopod ROM it has a WCDMA option too. No big deal !
Seting the band was just so that the phone doesn't bother looking for bands that are not available in this country. To try and encourage it to check the correct UMTS band more quickly.
My suggestion to use find network (you need to select manual search) in Networks wasn't too helpful anyway as it doesn't list the band. So no use unless you can disable GSM.
Of course you may have got a spurious speed test result. How old is your SIM? It needs to be a USIM

Yes firstly is your SIM card a USIM....or is it a SIM card from an old handset?? I think youve already said you have had the 'U' appear on your TyTN at some point.....so again im going with the assumption you just dont have adequate UMTS reception for it to work....hence why you are only seeing 'G'.

So, funny story...
It seems where i was over the weekend (girlfriends) is borderline, so as mentioned aboved i can get 3G upstairs but not downstairs - i decided to drive around and got 3G all over the place...the best news is i get 2/3 bars of 3G at home too!
Problem solved, im an idiot - but hey, it doesn't hurt to ask right?
680kbps! Woo

richieboy said:
So, funny story...
It seems where i was over the weekend (girlfriends) is borderline, so as mentioned aboved i can get 3G upstairs but not downstairs - i decided to drive around and got 3G all over the place...the best news is i get 2/3 bars of 3G at home too!
Problem solved, im an idiot - but hey, it doesn't hurt to ask right?
680kbps! Woo
Click to expand...
Click to collapse
girlfrends! Woo

3g Tmobile UK Connection Issues

I(m currently switching between GSM and 3g - however i gprs seems to work fine for browsing however 3g does not seem to be working for browsing but ok for calls!! Im in the birmingham area where 3g coverage is normally superb - is anyone experiencing similar problems or know a possible way to resolve? I soft reset doesnt resolve the issue!

I am in T-Mobile UK and have no problems so sorry cannot offer advice - is surfing with GPRS OK? I have found T-Mobile customer support very good - give them a try. Their tech support people seem to know what they are talking about which is nice too - much different to O2. Good luck
PS - if not tried then take a look at the excellent plug-in by Daniel Herrero here. I doubt it will fix this problem but it saves lots of battery power and is very configurable.

I have exactly the same problem. 3g is really slow for surfing and GPRS is so much faster. In fact a lot of the the time on 3g I just get error messages saying the page is not available etc but if I then switch to GSM it loads in a second.
I have found something weird though: If I switch the phone off or go in to comm manager and switch the line connection off then try to surf or download on 3g it will not work.
If however, I switch the phone or the connection on then switch to gsm, and then to UMTS/3g it will surf on 3g.
For this I use Daniel Herrero's excellent program to fast switch.
but even this method sometimes doesn't work.
What I've resorted to is surfing on GPRS and when I need to download something, quickly switch (using Dan's Program) to 3g.
Am I right in thinking the no 3g connection after being switched on is a known issue with the Hermes?

HI JPHCCFC
Im in Birmingham on t-mobile and for the past two ...three days i to have had trouble connecting to the web or msn...very slow or no connection
Gavin

cheers for the info guys - im thinking that maybe its a 3g network error in the area - anybody who isnt experiencing problems in the birmingham area with 3g Data?

still no data 3g in the birmingham area....or is it my handset??? Gav1n how is your data 3g performing?

Im in manchester and i seem to have the same problem with 3g being much slower for browsing than the standard gprs

I'm getting the same issues in East surrey

phoned customer services they said they had no reported errors with the 3g network! they said try the sim swap with another tmobile sim to see if its the handset or network!

hi im still the same no 3G ....in brum (quinton) when i change the band to gsm every is thing is ok....its the same on my wifes phone ...so deff a t-moible thing...
gavin

3G connection issues on TMobile-Vario2
Dear all,
Appears the south-east also has the same type of connection issues. Everything appeared well until about 7-10 days back.
I e-mailed T-Mobile support and they advised that there were some network issues which could have impacted the service. I did notice that their on-line account services had also been upgraded around the same time period - maybe a coincidence - but every since then the phone doesn't seem to surf properly on the 3G service. AND, battery life goes down dramatically - I only now manage to get about a day's use out of the damn phone!
I've got a replacement battery from T-Mobile - but same thing happens. I think it's all inter-related!
So what's the solution anyone? 'cos I am getting rather hacked off with it all!

I'm getting hacked off with really bad now.
My grps is faster than 3g. Period. Regardless of reception. Anyone got a solution???

try disabling hsdpa with hermes tweaker and reboot your phone.make sure you are not connected to gprs while disabling it. it has solved my problems.

3G connection issues on TMobile-Vario2
Same here in the Canary Wharf area for the last 7-10 days. First I blamed my radio rom - I have upgraded to 1.34.00.10 when the problem started. But then I have also tried 1.27 and few older ones - all the same problem. Fast grps, but no 3G. The battery also dies quite fast on 3g, so I have now switched to GSM only. :-(

Don't know if any of you have done this already but I was having the 3G problems for a couple of weeks and battery was draining quickly, I phoned up T-Mobile and asked them if HSPDA was turned on on my account which it wasn't, since they turned it on the problems have disappeared and my connection speed is now at least 750 kbs.

3G issues
i have had my t-mobile for over a week now, but in the shop they said there was no 3G in edgbaston, birmingham but when i got it home i connected quite easily

3g dns failures
I have had a t-mobile vario 2 for the last 5 months. when I first got the phone I was excited to get the hsdpa activated and quickly phoned up tmobile and got through to a tech guy who activated it. I didnt really notice much speed improvement and tmobile only shows the 3g and not the h for hsdpa, but I was pretty happy with my speeds of around 70kbit/sec (tested through http://text.dslreports.com/myspeed?jisok=1). I downloaded fieldtest_157 which showed that I was connected to hsdpa but the values showed through hsdpa cqi status were very low.
About 1 month ago I was suddenly unable to go online whenever my phone went into 3g mode, my phone would show it connected but wouldn’t find any addresses. I was only able to when it switched to gsm. I phoned tmobile to get the problem fixed. they said it was a known issue with the phone and made me permenantly switch my phone to the gsm network. I was basically told that my phone does not support 3g and hangs on switching from gsm to 3g for no apparent reason and that they were working on the problem. they must have done something on their side because when I switched to phone back on to auto network switching, I got gsm and 3g connectivity and downloads but not hsdpa (checked with fieldtest_157)
next day because I was unhappy with the download speed I phoned tmobile and asked for hsdpa reactivation. the first level who answered made me hang on and reactivated hsdpa. same problem cant download except on gsm switch. rephoned tmobile and got through to another 2nd level tech guy and explained all my connection problems.he said that my phone had never been hsdpa connected and connected it for me. what do you know Im suddenly getting 950kbit/sec speeds and hsdpa cqi status shows all high teens or 20's. for some reason my battery is lasting allot longer and 5 months after getting the phone Im happy. moral of the story is to download fieldtest_157 from:
http://wiki.xda-developers.com/index...e=Hermes_Utils
and check hsdpa status because either lots of bull is being told to tmobile customers or there are some pretty stupid people working there.
I was getting lots of dns failures (except in gsm) and getting really fraustrated. I was going to ask for deactivation of hsdpa. Luckily the technician I spoke to (about the tenth person in 3 days) that eventually got me connected, new his stuff. He tried to trick me into admitting that I was using my phone as a modem for my computer and only connected me after I denied it. after he changed something on his side, he made me pull out my battery and do a soft reset. Everythings now how I expected when I bought the phone. It might sound like conspiracy theory but I got the feeling that he only connected me when it sounded like I knew slightly more than the average Joe. My hsdpa connection has been faultless ever since. Getting consistently high speeds even with 1 bar. On 3g!!
I had low fieldtest numbers before my proper activation. now all much higher teens or twentys
keep phoning tmobile until the problem is fixed!! and speak to someone who doesnt have to read a set of respone instructions and has some real knowledge.
Hope this helps
Cheers craig

No 3G in Glasgow. Was fine until 7-10 days ago. Phoned T-Mobile and the guy said they knew of problems. Asked for HSDPA to be activated, he claimed to have done this but no difference. Another post implies that they might not actually enable HSDPA first time of asking.
I bought the phone for 3G. It clearly has nothing to do with the handset since it worked fine for 3 months. Can I make a claim against T-Mobile?

i activated HSDPA and this resolved the issue for me!

t-mobile uk HSDPA and TYTN Issues, possible solution

Right, this is my second tytn and i have sent first one back last summenr because of HSDPA problems. problem was that when i use 3g connection to internet was (usually) broken and couldn't load anything at all but was ok in gsm mode. I thought htc might have fixed it so bought current TYTN but hey! problem is still there. While trying to sort out i noticed that if i disasble HSDPA 3g works fine. dont forget you will stick with standart 3 g speeds.
can any one confirm?

how do i know when im getting hsdpa as i never seem to get any speeds faster than around 29k which is around 3g speeds even with a full 3g signal although i do find internet access very very flaky still...
I am still running the standard t mobile settings, i havnt chaged the proxy settings which in some cases help a lot of people

id be more inclined to say its tmobile's end that isnt working correctly, my TyTN is working fine on HSDPA with O2-UK. Have you had your account enabled for using HSDPA????

Gavin01 said:
how do i know when im getting hsdpa as i never seem to get any speeds faster than around 29k which is around 3g speeds even with a full 3g signal although i do find internet access very very flaky still...
I am still running the standard t mobile settings, i havnt chaged the proxy settings which in some cases help a lot of people
Click to expand...
Click to collapse
you need to call t-mobile and tell them you want to speak to technical support then tell them that you want to enable hsdpa on your line. in 30 mins you get it. but doesnt metter. if you have hsdpa in your area and your tytn enabled you might have problem without actually getting it
mrvanx
id be more inclined to say its tmobile's end that isnt working correctly, my TyTN is working fine on HSDPA with O2-UK. Have you had your account enabled for using HSDPA????
Click to expand...
Click to collapse
i didn't know o2 has hspda network :S

nolovelust said:
...
i didn't know o2 has hspda network :S
Click to expand...
Click to collapse
Well it seems so, I checked online to make sure i wasnt spouting rubbish LOL! As in my sig i achieve ATLEAST 1.1mbps when im connected to and they did announce they would be trialing HSDPA in the isle of man (which they have the fixed aswell as mobile telecomms contracts) and they rollout would be to the latter of 2006?!? Ive managed these speeds since i got my USIM (early september).
If im SERIOUSLY mistaken then i apologise but its gotta be HSDPA since the practical achievable speeds on regular UMTS are around 300kbps right?

yes you're right. you can't achive 1mbit without hspda. i have an o2 sim. will try it

Hero, have to choose: Data/3G or voice calls, HTC reinvet the 90's!

Hi,
after having several missed calls going straight to my answering machine on my new HTC Hero. I was getting a bit paranoiac, so I've decided to test in/out calls.
Basically, 90 of my incoming calls were going straight to my answering machine. Out-call were about 30% KO
After several tests, to make sure there was a problem, I've decided to request for support from HTC.
Support told me that I should shut the 3g connection every time I would want to receive a call .
So I tried and Bingo, if 3G is activated, I get 10% of the calls, if I deactivate it 90% success.
So you'll say, I should be happy? Right? Wrong!
The main use of that kind of phone is to have a data integration, otherwise I would have kept my old nokia from 10 years ago..
Here basically, if I follow HTC idea, I should keep the 3g closed, sometime, I should switch it on to get my mails, thanks to the non true push capacities (ok this one is not htc) then wait for the sync, maybe force it , get my mails, and then, shut 3g back and pray that no Über important call would have been done.
Well that plain sucks!
Never had such a thing on my previous Data friendly mobiles, why should I accept it on the Hero?
If someone have come across this bug, cause it is a bug, how did he/she managed to fix it?
Thanks

works fine on mine....i suggest you are on a ****e network, or on only 2G where you are. that's what usually causes this.
I guess they suggested this because it sounds like your network hasn't figured out how to route calls properly on their network when data is active, and they dump it straight to voicemail when there is a data connection active.
not the phone's fault, the phone won't even know that the call has been missed, the network simply does not route the call through and sends it to voicemail instead.
i had this on O2 a while ago. went to t-mobile (who knew how to set up their network properly for data) and never had this issue since when i am on 3G coverage. if i'm on 2G signal and have active data then yes, i miss calls. but that's how 2G networks operate.
it's truly shocking how many networks out there have absolutely no idea how to set up their networks properly for data!

Well I wish it would be that, my signal goes from -63 dbm 25 asu(80% of the time) to -81 dbm 16 asu.
Just after my post, I called one of my friend working in carrier terminal validation.
What he told me was, 2 options:
- Same bug was on the htc cruise, bug got corrected after a fw update.
- Some of my carrier radio are buggy and 3g goes over gsm.(SFR/VOdaphone France)
I bet for the first option since I had the problem in various places since I didn't want to ask support for nothing and get busted for a " feeling and not facts" (did the test in 3 differend location 80 tests in total(I used to be a tester....).
I will update the topic if I get news about it

nmuncer said:
!
Never had such a thing on my previous Data friendly mobiles, why should I accept it on the Hero?
If someone have come across this bug, cause it is a bug, how did he/she managed to fix it?
Thanks
Click to expand...
Click to collapse
You shouldn't accept it - but most people don't have this issue!
It's unlikely to be a "bug" per se, because otherwise it would be endemic behaviour, so it's either:
1. Your physical device (get it changed!)
2. Your network.
In addition, just an FYI in case you've got the new Sprint Hero, but most CDMA networks (including Sprint) do not support simultaneous voice and data. I've no idea what happens in practice on Sprint, but I'd imagine if you were actively using data your voice calls would get diverted to voicemail unless Sprint automatically suspends data when a voice call is pending.
Regards,
Dave

You're on SFR?
OUCH!!!!
Sounds like you have a nice strong signal, but is it 2G or 3G? (do you see a G, E 3G or H at the top of the screen?
if you see G or E, it's cos you're on 2G, If you get 3G or H, it's on 3G.
And yes, there were a few issues with the P3300 and the cruise, but they were mainly on Bouygues, not so much on SFR.
There's nothing known of on the hero, and as SFR sell the Magic, i would have thought they would have ironed out any issues already...

Hi,
I'm mostly in HSDPA or 3G.
I still have contacts with people at SFR (used to work there till recently) they might share a bit of info.

Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.

rhedgehog said:
if you see G or E, it's cos you're on 2G, If you get 3G or H, it's on 3G.
...
Click to expand...
Click to collapse
Regarding this and your suggestion that 2g and data will result in missed calls, Can you suggest how to avoid this happening? I live and work in the country and only have 2g, so have found quite often people have mentioned my phone not even ringing- straight to answer phone. This explains it.
Nice to know, but annoying if I can't solve it- I run a business and my phone is very important.
Cheers,

ajones7279 said:
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
Click to expand...
Click to collapse
i have sprint as well and when someone calls you when youre running hybrid, you should not miss calls. you will get disconnected from the internet when someone is calling though

ajones7279 said:
Idk if yours is CDMA or the GSM one but on mine (CDMA) under the mobile network settings, I have the option to switch the mode of operation to ether Hybrid, EVDO only, and 1X only. Now, I know how Sprint's network works, not sure if it's the same for any other networks but if I set it to Evdo only (3g) I'll miss all my calls because Sprint does voice over 1X. Hybrid mode does EVDO when you're using data and switches to 1X when you're doing voice/sms.
Click to expand...
Click to collapse
Hi, I'm on hybrid

that is what i hate about hero, it is really great except for the fact that it switches from 2g to 3g without notice. i want it to be permanently stuck in 3g for faster downloads and mms, but when it uses 2g, i cant send and receive mms and surfing the web is slow as heck! im still looking for an app that would permanently put the device in 3g just like with winmo it which you can use wcdma ONLY.
cheers!

If you use AnyCut, you can create a short cut by selecting:
New Shortcut->Activity->Phone info
This will create a shortcut on your homescreen which beings up a hidden "engineering" screen on which you'll find an drop down for "Set preferred network type" where you can select WCDMA only.
Regards,
Dave

alternatively, open the phone app
dial *#*#4636#*#* and select phone info
scroll down and set it to WCDMA only.
does the same thing but saves installing an app.

rhedgehog said:
alternatively, open the phone app
dial *#*#4636#*#* and select phone info
scroll down and set it to WCDMA only.
does the same thing but saves installing an app.
Click to expand...
Click to collapse
holy monkey! im going to try this!!! do i have to di it everytime i turn the phone of or is it permanent?

orouborus said:
that is what i hate about hero, it is really great except for the fact that it switches from 2g to 3g without notice. i want it to be permanently stuck in 3g for faster downloads and mms, but when it uses 2g, i cant send and receive mms and surfing the web is slow as heck! im still looking for an app that would permanently put the device in 3g just like with winmo it which you can use wcdma ONLY.
cheers!
Click to expand...
Click to collapse
That is not specific to the Hero. The fact is, every carrier's 2G network has better coverage than their 3G network. When the phone cannot detect strong enough 3G signal, it jumps back to 2G network. The idea is that slow data transmission is better than no data transmission at all. Many smartphones have the option to lock the mobile network to 2G only. One advantage is that it gets better reception, and another advantage is longer battery life (the 3G chip eats battery much faster than 2G).
If you instead lock the phone to its 3G network. The first thing you will notice is that battery life is significantly shorter. And chance is that you may be getting very spotty reception, because you are not allowing to phone to switch to 2G when it gets no 3G signal. When there is no 3G signal, forcing the phone to "3G only" mode won't give you faster download, it gives you no download.

tsekh501 said:
That is not specific to the Hero. The fact is, every carrier's 2G network has better coverage than their 3G network. When the phone cannot detect strong enough 3G signal, it jumps back to 2G network. The idea is that slow data transmission is better than no data transmission at all. Many smartphones have the option to lock the mobile network to 2G only. One advantage is that it gets better reception, and another advantage is longer battery life (the 3G chip eats battery much faster than 2G).
If you instead lock the phone to its 3G network. The first thing you will notice is that battery life is significantly shorter. And chance is that you may be getting very spotty reception, because you are not allowing to phone to switch to 2G when it gets no 3G signal. When there is no 3G signal, forcing the phone to "3G only" mode won't give you faster download, it gives you no download.
Click to expand...
Click to collapse
true true. i usually charge my phone everynight though. problem that i have with 2g is that i cant send and recieve mms and yeah data connection is slow. in our place 3g signal is ok. i also lock my topaz for wcdma only. but it is ok that it switches to 2g in low signal areas.
Thanks!

You actually use mms?
Wow, they do exist.

barryallott said:
You actually use mms?
Wow, they do exist.
Click to expand...
Click to collapse
yeah... mms is great. i use it to send items that i wish to purchase etc.

What NOM1 Networks are there in the UK? I only get 2g in my area (booo) and could do with an operator that works right. T-Mobile forums suggest they still have an issue

Hi
I've checked it with Hero running in PlusGSM in Poland.
Regardless if I select 2G/3G or even "WCDMA preffered/GSM Only/WCDMA only" setting the phone is not available for incoming voice calls during data transfer. Every time when I start internet connection (example: SSH session) I'm not available for incoming calls. At this site I do have both strong 2G and strong 3G networks.
I would like to mention that a few days ago I've swapped Samsung SGH-i600 (WinMo 6.0) for HTC Hero - so I'm using the same SIM card in the same network and the same place. SHG-I600 was able to perform both data transfer (on 2G) and voice (on 3G) on the same time. HTC Hero is not...
I wonder if this is 'feature by design' or a bug in software?

3G mode not working sometimes

Have had this phone a coupla months, happy with it except the stupid GPS problem and some other connection problem.
When using wifi connection at home, if i stop browsing and close the screen for a few minutes and go back to surf internet, the wifi will stop working, turning wifi off and on again will make it work. Not too difficult but sometimes this feels sucks.
second problem is, occationally i will lose the "3G" or "H" sign on the top and cannot connect to internet using 3G data connection. i have no idea why this is happening. sometimes when i am out on street, try to check some information online, 3g is my only option and it really bothers me when it stops working. i'm using orange. all setting are as original.
Anyone knows how to solve these 2 problems?

the phone either works on
850/1900/2100
or
900/1900/2100
so depending on the model that you purchased
and where you live
also the cell phone provider that you are using
you might not get the full band usage of your phone
for example using the above models on a phone service that only uses
1700/1900/2100
then you are cripled
some telcos only use 1 band or 2 bands at most
1700 or 2100 for example

ehe12 said:
Have had this phone a coupla months, happy with it except the stupid GPS problem and some other connection problem.
When using wifi connection at home, if i stop browsing and close the screen for a few minutes and go back to surf internet, the wifi will stop working, turning wifi off and on again will make it work. Not too difficult but sometimes this feels sucks.
second problem is, occationally i will lose the "3G" or "H" sign on the top and cannot connect to internet using 3G data connection. i have no idea why this is happening. sometimes when i am out on street, try to check some information online, 3g is my only option and it really bothers me when it stops working. i'm using orange. all setting are as original.
Anyone knows how to solve these 2 problems?
Click to expand...
Click to collapse
3g nodes and 2g bts wont give you the same area coverage, yes you will lose the H and drop down to 3g if your -db rating (signal is low) is at the highest limit for the cell and it deems you either need handing off to another site or you were one of the last ones to be allocated a slot and get kicked.
its how the cookie crumbles, no where will give you 100% coverage and if u are close to a small site thats overloaded with traffic you will always get crappy uplink and downlink...
b

I dont know where you are or what provider you use, but I have the same problem with my I900M on bell. it is apparently a widely known issue with Bell, and they associated my phone with the ongoing ticket incase it gets resolved they'll contact me.
Also, when I lose the 3g, ts a good chance my phone is going to lock up and need a battery pull to boot back up.
So Basically if I leave the house or wifi spot, I try not to show people my internet on my phone so it doesnt look like I'm carrying a brick in my pocket everywhere.

anarchyuk said:
3g nodes and 2g bts wont give you the same area coverage, yes you will lose the H and drop down to 3g if your -db rating (signal is low) is at the highest limit for the cell and it deems you either need handing off to another site or you were one of the last ones to be allocated a slot and get kicked.
its how the cookie crumbles, no where will give you 100% coverage and if u are close to a small site thats overloaded with traffic you will always get crappy uplink and downlink...
b
Click to expand...
Click to collapse
so that's something to do with the carrier? Thanks for the explanation!