Related
I searched all the threads and found nothing on this as far as I can see. I have been having this since day one with my G1. Every time I receive a call on my G1 or during the call it drops from 3G to GSM. I had stock T-Mo roms on my G1 (Pre/Post Cupcake) then JF 1.51 and now cyanogen 4.0.2 and this problem persists. I called T-Mo a few times on this and they exchanged my G1 3 times and gave me a new battery and charger free of charge. Does anyone else have this issue or know of a work around? This happens when I am at home and work. I travel for work to different locations and it still happens. When my phone rings it automatically drops 3G and goes to GSM (no icon next to the radio icon in the status bar). While making calls it stays on 3G for about a few seconds before it craps out and drops to GSM. It totally skips EDGE and GPRS. T-Mo said they sent out radio antenna tech's to the antennas near my home and they said all is fine and dandy. I live In Queens NY and work in the Bronx. When I travel to Brooklyn its the same as well as driving though Manhattan. I hope someone can help me with this.
PeterC18st said:
I searched all the threads and found nothing on this as far as I can see. I have been having this since day one with my G1. Every time I receive a call on my G1 or during the call it drops from 3G to GSM. I had stock T-Mo roms on my G1 (Pre/Post Cupcake) then JF 1.51 and now cyanogen 4.0.2 and this problem persists. I called T-Mo a few times on this and they exchanged my G1 3 times and gave me a new battery and charger free of charge. Does anyone else have this issue or know of a work around? This happens when I am at home and work. I travel for work to different locations and it still happens. When my phone rings it automatically drops 3G and goes to GSM (no icon next to the radio icon in the status bar). While making calls it stays on 3G for about a few seconds before it craps out and drops to GSM. It totally skips EDGE and GPRS. T-Mo said they sent out radio antenna tech's to the antennas near my home and they said all is fine and dandy. I live In Queens NY and work in the Bronx. When I travel to Brooklyn its the same as well as driving though Manhattan. I hope someone can help me with this.
Click to expand...
Click to collapse
ive always had this as well .. just never considered it a bug lol ... but i could see why someone would wanna keep their 3g while on a call .. reminds me of how sidekicks would lose data connectivity due to a call
xidominicanoix said:
but i could see why someone would wanna keep their 3g while on a call .. reminds me of how sidekicks would lose data connectivity due to a call
Click to expand...
Click to collapse
Could you elaborate?
If you've had 3 G1's and a tech says there's nothing wrong with the network then it's clearly an issues with cupcake, be it a feature or a bug...
I don't really see why you would want to keep data conectivity while in a call, (unless you're downloading something in the background..?) so it sounds like a way to save battery..
AdrianK said:
Could you elaborate?
If you've had 3 G1's and a tech says there's nothing wrong with the network then it's clearly an issues with cupcake, be it a feature or a bug...
I don't really see why you would want to keep data conectivity while in a call, (unless you're downloading something in the background..?) so it sounds like a way to save battery..
Click to expand...
Click to collapse
Here's a perfect example where 3G would rule when working properly.
I'm talking to my wife on my BT headset while driving home from work. I have my G1 on my dash with google maps running with traffic patterns showing. While talking I am able to talk clearly on 3G and still see where traffic is building so I can avoid it. Being stuck in rush hour in NYC sux homeless man [email protected] Whenever I do this and my 3G connection drops my call quality drops and we both hear it while we're talking and then it cuts in and out and the call drops then I dont get updates. It's a feature I would really like to have. Even when Im working and talking and downloading a new update of an app. This happens when I am at a static location as well. I know driving from cell tower to cell tower can have bad effects but it does the same when I'm just at home or any of my work locations. When 3G works properly which is rare its amazing. Its helped me get un lost and find my way many of times.
Point being when T-Mo released the 3G statement they said all users with 3G phones will expierence higher call quality from the extra bandwidth. Why would they cap or or disable it when they are promoting it? I see the the point of saving battery life but it still shouldnt be happening. 3G is made for that feature to work voice + data being accessed together.
It might just be there 3g network, imo tmobile reception is horrible. Like at my house it is so f'ed up, I can sit in my chair and have 3 bars then walk 2 feet and lose service. It does this all through my house and at my work. They said it must be something in the buildings I am in, bull**** I say because ATT never does that nor did vzw when I used them.
same thing happens with me and 3g and calls..also about the house thing, hows this one for u ill be sitting in the same spot and have good 3g reception and all of a sudden it drops to edge. I know a way around this is to set phone to 3G only but then in areas where theres non im screwed
I don't get it. My wife who had the original iPhone and then 3g and now 3gs never had this issue. She would stay on Edge and 3g depending if she waned to save batery life. My old BB 8700g would always stay on Edge never drop to GSM in my apartment. My 3G doesnt even fall to Edge it goes right to GSM. This is really annoying.
every t-mobile phone I have does this
I'm pretty sure its normal
No one knows if this is a hardware, software, or network problem. Except maybe HTC/T-Mobile/Google.
If your phone stays connected to 3G, it's all good. If it drops down to EDGE, even if for half a second, it will NOT reconnect to 3G until you hang up.
c2tmdsn said:
every t-mobile phone I have does this
I'm pretty sure its normal
Click to expand...
Click to collapse
My coworkers Samsung t819 doesn't. That's regular cell phone not a smart phone.
Gary13579 said:
No one knows if this is a hardware, software, or network problem. Except maybe HTC/T-Mobile/Google.
If your phone stays connected to 3G, it's all good. If it drops down to EDGE, even if for half a second, it will NOT reconnect to 3G until you hang up.
Click to expand...
Click to collapse
If any of those 3 know they should fix it or at the very least advertise that the calls you make are dropped to the lower bandwidth of the GSM network.
T-Mo finally got 3G for the last year don't dumb it down guys. Fix this.
Yes it is true once your phone drops beneath 3G it will not go to 3G until you hang up the call.
try running 3g only or wdma only by creating phone info shortcut on anycut .. im going to try that out and see if it ever drops .. should be a temporary fix for you atleast with the whole maps thing and such but if you ever in an edge only are your screwed
turboyo said:
try running 3g only or wdma only by creating phone info shortcut on anycut .. im going to try that out and see if it ever drops .. should be a temporary fix for you atleast with the whole maps thing and such but if you ever in an edge only are your screwed
Click to expand...
Click to collapse
I changed it to wcdma only in phone info. Hopefully this works. Everywhere I travel to throughout NYC has 3G. Hopefully this works. Also I have noticed that when downloading anything from 3G be it the market or browser it would drop from 3G to Edge as well.
PeterC18st said:
I changed it to wcdma only in phone info. Hopefully this works. Everywhere I travel to throughout NYC has 3G. Hopefully this works. Also I have noticed that when downloading anything from 3G be it the market or browser it would drop from 3G to Edge as well.
Click to expand...
Click to collapse
*UPDATE*
While at home downloading apps from Android Market on 3G with wcdma only selected the radio dropped with no netowkr connection. Bust.
PeterC18st said:
I don't get it. My wife who had the original iPhone and then 3g and now 3gs never had this issue. She would stay on Edge and 3g depending if she waned to save batery life. My old BB 8700g would always stay on Edge never drop to GSM in my apartment. My 3G doesnt even fall to Edge it goes right to GSM. This is really annoying.
Click to expand...
Click to collapse
Did she use att or tmobile with the iphone? Because att has a much stronger 3g network then tmobile which could be why. I am pretty sure it is something to do with tmobiles network and not your phone, perhaps your area has to many users for it to stay on 3G. I have read about how the cell towers work and they have only so many bands for each user to access at any given time so if tmobile doesn't have enough towers or those things mounted on the towers it may be set up so you only get 3G for data usage and not calls since they don't technically require it to work.
crpercodani said:
Did she use att or tmobile with the iphone? Because att has a much stronger 3g network then tmobile which could be why. I am pretty sure it is something to do with tmobiles network and not your phone, perhaps your area has to many users for it to stay on 3G. I have read about how the cell towers work and they have only so many bands for each user to access at any given time so if tmobile doesn't have enough towers or those things mounted on the towers it may be set up so you only get 3G for data usage and not calls since they don't technically require it to work.
Click to expand...
Click to collapse
My wife is on ATT. Isn't lower frequency better at penetrating through walls and such? (T-Mo 1700 MHz and 2100 MHz compared to ATT 1800 MHz) They haven't booted their 850 MHz antennas yet so I hear.
If that is true then why not boot me down to Edge or gprs why all the way down to gsm? I been living in the same area for 26 years. I have been with T-Mo before they even had antennas in my area and walking outside was the only way to get a signal with my phone. Now I get full reception in and out of my apartment and 3G connectivity in my apartment with a signal strength of -93dBm through out my apartment on 3G and -79 dBm on Edge.
T-Mo stated that this should not be happening. Hence the 3 phones new battery and charger and techs to the antennas. I'm starting to think its a HTC Android problem and not a T-Mo problem. Hopefully a new radio update can fix it.
I didn't even know GSM was still used in that way, I thought GPRS would be the bare minimum. How can you tell the difference? I use to only get a G icon and I looked it up and for the g1 it said that meant GPRS, what does it show for GSM? Not like any of this matters though.
I really have no idea why all this is happening to your G1 but I hope it gets resolved, good luck.
edit: on the tmobile coverage map it says edge/gprs and 3g, no gsm. does that make any difference? I checked for NYC overall not any specific boroughs.
crpercodani said:
I didn't even know GSM was still used in that way, I thought GPRS would be the bare minimum. How can you tell the difference? I use to only get a G icon and I looked it up and for the g1 it said that meant GPRS, what does it show for GSM? Not like any of this matters though.
I really have no idea why all this is happening to your G1 but I hope it gets resolved, good luck.
edit: on the tmobile coverage map it says edge/gprs and 3g, no gsm. does that make any difference? I checked for NYC overall not any specific boroughs.
Click to expand...
Click to collapse
GSM is what Edge Gprs and 3G run off of. Think of it as a progression. GSM>GPRS>EDGE>3G.
The way I know it is on GSM is to the left of the Radio icon on the home screen there is another icon that shows the network your on. 3G=3G E=EDGE G=GPRS and no icon means GSM. GSM is still being used. Most SMS and MMS messages get sent to your from through GSM while you are on a call.
Hi All,
Done a quick search on this and can't find anything relevent, but i apologise if a thread already exists.
Really a question for those in the UK on the t-mobile network. Have any of you attempted to sign up for the orange 2g roaming service yet? I signed up, recieved the confirmation text, replied to it, and received the final confirmation. However, I'm not sure it's working. The signal seems no stronger, and i still drop in my house.
Obviously i'm posting this in the android section because i'm running android myself and am wondering whether anyone in the same boat has managed to get roaming to work. Should the fact that we're on a non-official OS running off the sd card make a difference?
Oh and for completeness, i'm running shubcraft 1.5 rmnet.
Cheers fellas!
I'm quite happily flip flopping between Orange while at work and T-Mobile for everything else...
works like a charm for me though you do have to stick the phone into Airplane mode after selecting the different provider for the data to work ...
Jezwick said:
I'm quite happily flip flopping between Orange while at work and T-Mobile for everything else...
works like a charm for me though you do have to stick the phone into Airplane mode after selecting the different provider for the data to work ...
Click to expand...
Click to collapse
Many thanks for the reply Jezwick. So, just for clarity, you're manually selecting each provider as and when required? Because i can do that, i think. When i select orange though, whilst it registers with the network fine, i get a little "R" above the signal bar (any ideas what that means?) And the speed appears to be limited to Edge. Orange have a very strong signal round here, so i figure i should be getting GPRS really.
It's the auto-switching i'm not totally sure is working really. Is there any explicit indicator that it's flipping on it's own? Or do you just observe a generally better 2g signal, rather than say, a very weak 3g one? Round the house, my phone is still trying to make do with 1 or zero bars of 3g. I would have hoped it would flip over to orange more or less all the time under those circumstances. Nothing to stop me manually selecting it i guess though...
_tangent said:
Many thanks for the reply Jezwick. So, just for clarity, you're manually selecting each provider as and when required? Because i can do that, i think. When i select orange though, whilst it registers with the network fine, i get a little "R" above the signal bar (any ideas what that means?) And the speed appears to be limited to Edge. Orange have a very strong signal round here, so i figure i should be getting GPRS really.
It's the auto-switching i'm not totally sure is working really. Is there any explicit indicator that it's flipping on it's own? Or do you just observe a generally better 2g signal, rather than say, a very weak 3g one? Round the house, my phone is still trying to make do with 1 or zero bars of 3g. I would have hoped it would flip over to orange more or less all the time under those circumstances. Nothing to stop me manually selecting it i guess though...
Click to expand...
Click to collapse
The R is indeed for roaming that's the way it works if your not on your 'own' network.. The 'flipped' service will currently only work at GRPS speeds at the moment but should be 3G by the new year
I have noticed mine flipping automatically but only once or twice in the last few weeks but only when I get NO signal from the current service.
Jezwick said:
The R is indeed for roaming that's the way it works if your not on your 'own' network.. The 'flipped' service will currently only work at GRPS speeds at the moment but should be 3G by the new year
I have noticed mine flipping automatically but only once or twice in the last few weeks but only when I get NO signal from the current service.
Click to expand...
Click to collapse
Understood - thanks for the info Just done some reading and apparently EDGE is faster than basic GPRS. For some reason, i'd always assumed the reverse. Looks like the best option is just to have it always on orange whilst at home and use wifi for data (which i do anyway to compensate for the poor signal). Cheers!
I'm on the Three network, have an unlocked HTC desire HD with 17 m2 radio.
Normally I get terrible signal in the flat that i live in, its a granite building in Aberdeen. Occasional the signal is around 1 bar, sometimes grey, and most of the time its X.. (no service), but i still manage to get 3G or H. When looking at the APN settings and specifically at available networks when doing a manual search, next to 3 is a green star which I assume means it's connected to 3 mobile network. But sometimes i get amazing signal, full bars, which puzzled me! so I looked at the available networks and next to 3, there was no star, so i tried calling a number and it rang and came through. I also tried using mobile internet when in this "good coverage" state, and google would not load (G is displayed in the notifications bar). After a while, the bars would drop to 1 or grey, and i would then get H or 3G, and google loads again. What's going on? and how can i take advantage of this when i have no signal.
try and find the app called open signal maps
that can be used to see where the signal-towers are
and how good the signal is
or use this site and search your adress
http://opensignalmaps.com/
sincere regards,
blokhoofd
The antenna is really wierd.
Normally I only get 2G connection.
But if I completly take my hand off the lower cover and lift the phone up a bit for a better signal, I get a 3Mbps connection, though as soon as I lower my phone back to normal the 3G signal is completly gone or gets really bad (zero bars and lower than EDGE speed)!
The antenna in this phone sucks really bad, my old Nokia phone atleast had a stable connection.
This is very bad news... I was considering DHD, but if there are isseus with gsm signal than I am really worried... Is it also happening on the stock ROM?
As long as network coverege is good you should be okay.
I swaped my SIM card with a friends and with better coverege, 3.5G worked good (solid 2Mbps), only slight drop if SIM cover is completly covered, which doesn't happen in normal use.
I just can't understand how I can get such high speeds with my SIM while on a badly covered area. haven't tested how well other devices pick up the 3G signal (my old phone wasn't 3G yet)
I'm still using stock ROM btw.
Have you tried a different radio?
People are reporting different results with them, so might be an idea to play around and see if anyone of them works better for you
I've tried the new Orange radio and I'm getting better signal, although threes coverage isn't great I would expect the device to seamlessly change between 3.5g and gprs but it doesn't it'll get stuck on hsdpa network until the x appears and sometimes it'll go to gprs and go back to three bars. Before it would be on x all the time and that's probably why the battery was quite ****. 3g doesnt penetrate buildings very well and I live in a granite building so would explain why I get better gprs signal. I just wish the antenna was smart and changed seamlessly.
Sent from my Desire HD using XDA App
So annoying dhd still not selecting the next best connection just no service but if I select to detect network automatically it connects eventually
Sent from my Desire HD using XDA App
Something strange I've noticed with my Galaxy S II is that data / internet will only work if the 'H' (for HSDPA) is in the status bar, but not with '3G' there...the green arrow will appear next to the 3G when I try to connect to something but it will just time out unless it happens to switch to 'H'.
Anyone know why this would be? Is only the HSDPA network working with my phone, but regular 3G won't?
It is possible that the 3G cells in your area are fully loaded with users.
Sent from my GT-I9100 using XDA App
nvm
i didn't read it well
Same problem here, on 3.
Wondered if it was the phone or the network! If it's a problem with the phone it'll be fixable/covered by warranty though, right?
Same here, it sits on 3g then i try to load a page etc and it goes to h like it carnt use 3g , im on t mobile and they have full coverage where i am
Sent from my GT-I9100 using XDA App
I found an older thread that says it's a feature, keeping the phone in 3G mode to save battery until you do something that requires data which switches it over to H. I've kept a closer eye on my phone and that does seem to be what it's doing, usually taking a second or two to switch over each time I use data.
However, there have still been some times where it stays on 3G and is unable to load data.
Yeah i think your right and also it does not change sometimes and kinda hangs, be nice for it to switch over to H abit faster without battery drain.
AXIS of Reality said:
I found an older thread that says it's a feature, keeping the phone in 3G mode to save battery until you do something that requires data which switches it over to H. I've kept a closer eye on my phone and that does seem to be what it's doing, usually taking a second or two to switch over each time I use data.
However, there have still been some times where it stays on 3G and is unable to load data.
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
I have the same issue with my phone to on t-mobile, not working on 3g then working on H.
It is a right pain to be honest.
No way of stopping this battery save? I would rather use more battery.
It's the network. I have no explanation but only Edge and HSDPA work whether on Samsung or Nokia.
Just tested, this does not occur for me, at least right here, right now. Comfortably loading pages on Google with just 3G signal (T-Mobile UK).
It's faster when I stand on my bed upstairs for HSDPA but 3G does work. Stock firmware from T-Mob, no modifications.
AXIS of Reality said:
Something strange I've noticed with my Galaxy S II is that data / internet will only work if the 'H' (for HSDPA) is in the status bar, but not with '3G' there...the green arrow will appear next to the 3G when I try to connect to something but it will just time out unless it happens to switch to 'H'.
Anyone know why this would be? Is only the HSDPA network working with my phone, but regular 3G won't?
Click to expand...
Click to collapse
Hey mate,
I have the galaxy s i9000, with optus here in sydney. same problem, only switches to "H" when i make some sort of data request (load a page, open an app that uses internet), it takes a couple of seconds to switch from 3G to H. Sometimes, it keeps flicking back and forth between 3G and H like its having problems connecting to H
I complained to optus, they reckon i'm lying. Go figure.
joeykatoa said:
Hey mate,
I have the galaxy s i9000, with optus here in sydney. same problem, only switches to "H" when i make some sort of data request (load a page, open an app that uses internet), it takes a couple of seconds to switch from 3G to H. Sometimes, it keeps flicking back and forth between 3G and H like its having problems connecting to H
I complained to optus, they reckon i'm lying. Go figure.
Click to expand...
Click to collapse
Sorry.. just to add on, i've tried about 13 different modems on my i9000 and it happens with all of them.
The only fix I've come by? dial *#301279# and disable HSDPA altogether thats the only way my phone will actually load any data on 3G
I have the same thing, but as i understand H and H+ are the highest form of 3G, not a different thing. So I am wondering what mode we are in when 3G appears. UMTS?
Its all very annoying to be honest.
None of my other phones have this problem as they always stay on HSPDA
Same problem here to the extent that pages fail to load on 3g and come up with the error then when I refresh the page once its on H it loads straight away.
Actually this problem is making my phone more or less not usable.
I use the slingplayer alot, keeps skipping on the Galaxy S II as it seems to keep switching between H and 3G.
Put the sim card into my ZTE Blade (Orange San Francisco) and streams constantly with no problem with signal staying on H.
With all the threads relating to 3g and connectivity issues..we can deduce that SGS2's modem really sucks big time..and still no firmware update to correct this even though large number of people is facing some sort of problem with mobile internet which is a main function on todays smartphone.
Sent from my GT-I9100 using Tapatal
Anyone know who to e-mail with examples at Samsung?
I guess they won't fix a problem if they don't realise there is one.
Some people will prefer longer battery when its on 3G then H, others will want the constant H.
I got mine a week after it released. The first two updates mine did the same thing, but instead of timing out, it would drop all signal and display the circle. After a reboot signal would come back. From KE7, it has not done it again.
AT&T in the U.S.
same problem, mode switches around when using data, 3 australia
I've been following the mobile data connectivity issue that some users are experiencing (where data connection drops randomly, apparently coinciding with a lot of switching between 3G/H/H+).
Initially, people suggested disabling 'fast dormancy' using *#*#9900#*#*, however, this did not work for many, including myself.
In this post http://forum.xda-developers.com/showpost.php?p=15250511&postcount=6, there appears to be a solution, albeit a workaround.
I have started this thread, as there are so many separate threads about this issue, and only the Telstra Australia thread had this answer (as far as I've read). I have copied the post (a repost from whirlpool) by dusty_nz below. Basically, the problem is serious, the guys from Samsung have insisted this will be fixed in KE9, but there is a workaround in the mean time (disabling H+ and H, or just disabling H+ using *#301279#). This may seem drastic to speed freaks, but 3G connection alone should still give you 1.5 Mb up/down if you can put up with that. This has worked for me, no more data stalling, no more server errors etc. etc. I hope H/H+ will be fixed in future firmware.
Here is the post:
dusty_nz said:
Found this on
http://forums.whirlpool.net.au/archive/1714413
****************** FIXED ******************
After contacting Samsung for an insane period of time (ended up on an international call to England i think... or now that i think about it could have just been some English guy in Aus lol) I have got an official explanation and confirmation that this issue is being looked into for KE8 (but it appears that KE8 has been launched in India already so it might be KE9).
*disclaimer*
I am no expert on mobile technology this in-depth however the (probably very) dumbed down version the Samsung guy told me was this;
*end disclaimer*
The problem stems from the fact that this phone has 3 forms of data connection, 3G, HSDPA, and HSPA+.
3G is what we have all had since 3/Telstra launch 10 years ago.
HSDPA is the 7.2mbps connections that we got after that.
HSPA+ is the full fledged 42mbps Next G stuff that only Telstra has.
The problem is, when you are just using the phone as "a phone" it idles on a 3G connection to save battery and when you initiate a data connection it flicks on to the higher connection protocols for better speed.
What is supposed to happen when you initiate the data connection is the phone checks for H+ connection, then for H and then finally 3G. For some reason if you arent with Telstra or are in an area without HSPA+ the phone gets hung up for too long attempting to initiate the H+ connection and refuses to drop back to H!
Also, even if it does give up on H+ it then has an issue with falling back to 3G. Resulting in the problem that if it cant get H+ or the tower is too flooded for a H connection you get absolutely nothing until you restart the data mode within the phone, renegotiates with the tower and BAM, you are back in business.
So... there are 5 fixes;
1. Wait for KE9 (or what ever firmware fixes the modem timings etc)
2. Get a Telstra sim and never leave an area that has H+
3. Turn off/on data mode whenever it happens
to which i told him they were stupid answers and completely unacceptable, but then he came out with this complete gem!
4. using service code *#301279# you can turn off HSPA+ completely forcing it to start the data connections on HSDPA
5. using *#301279# again you can just turn off HSPA+ and HSDPA meaning it instantly starts downloading the data on 3G without delay
Now yes, i thought... great... ive bought this $779 phone that has all the latest and greatest technology and I cant even use it! But, I did some testing!
First of all my normal sim is Vodafone so turning off HSPA+ is an obvious one for me, im never going to get it so why bother. So now that the phone only attempts to get a connection with HSDPA the need to turn off and on data connection was getting more and more rare but still having the problem (i have a feeling that is due to congestion?). So i bumped it down to 3G only and it works perfectly 100% of the time!
The point of these faster connection protocols is speed so i did testing.
Vodafone sim, 4 bars of signal in the middle of a shopping centre.
HPSA+ turned on = 4mbps down, 1mbps up
HSDPA turned on = 4mbps down, 1mbps up
3G only = 3.5mbps down, 1mbps up
did this over and over and over again and to be perfectly honest, im willing to lose 500kbps to make sure that data always works and if you are just doing general web browsing the time it takes to initiate the HSDPA connection wastes more time than the slightly slower speeds with 3G does.
Now obviously this only works fine in my situation, if you are with Telstra and going from HSPA+ down to 3G means going from 20mbps to 3... i would be pissed. But for the rest of the country you are talking about a loss of less than 1mbps so in real world situations with just small amounts of burst data its fine
TLDR; Try and go online and the 3G up arrow lights up but never actually downloads anything
Dial: *#301279# – Change HSPA revision – Release 5 HSPDA only
test, if still a problem
Dial: *#301279# – Change HSPA revision – Release R99 HSPA off
Your welcome, Peace out!
Click to expand...
Click to collapse
this works! thanks!
Cheers!
Just tried this and I got 1800kbps on 3g!!
Hmm, i played around with those codes. If i choose to drop H+ and H, stays on 3G, but speed is crappy for me. So i want to drop only H+, but when i do that phone stays only on 3G too, not attempting to connect to H. Am i doing something wrong ?
Sp1tfire said:
Hmm, i played around with those codes. If i choose to drop H+ and H, stays on 3G, but speed is crappy for me. So i want to drop only H+, but when i do that phone stays only on 3G too, not attempting to connect to H. Am i doing something wrong ?
Click to expand...
Click to collapse
*#301279#
Option [1] Release R99(HSPA OFF) - This should turn H+ and H off
Option [2] Release 5(HSDPA ONLY) - This should turn just H+ off (what you want)
Option [3] Release 6(HSDPA/HSUPA) - This should turn H+ and H on
To test this, you might want to make sure you are in an area that can pick up 3G, H and H+.
One week on since I selected Option [1] and I have not had any data stalling issues, before I was having data dropping every few minutes whilst browsing.
I tried Option [2] and still had the stalling issue.
Good luck.
tomelsmith said:
*#301279#
Option [1] Release R99(HSPA OFF) - This should turn H+ and H off
Option [2] Release 5(HSDPA ONLY) - This should turn just H+ off (what you want)
Option [3] Release 6(HSDPA/HSUPA) - This should turn H+ and H on
To test this, you might want to make sure you are in an area that can pick up 3G, H and H+.
One week on since I selected Option [1] and I have not had any data stalling issues, before I was having data dropping every few minutes whilst browsing.
I tried Option [2] and still had the stalling issue.
Good luck.
Click to expand...
Click to collapse
I hardly ever get H+, which is why i want to turn it off, thing is if i choose option 2, i only get 3G, while with option 3 i get 3G and H (probably H+ too if i were in the right place). Option 1 works fine, doesn't seem to stall, but 3G speed is crap in my network, that's why i wanted option 2.
Tried all three settings and I am getting about the same speeds with all three settings, 3600-4200 down and 1550-1620 up. So will try setting 1 to see if my connection carries on dropping out.
Thanks
Wat is the code for miui
Sent from my GT-I9100 using XDA Premium App
I actually tried this before on a few different radios and it didn't really work. The real problem I have is when I get in an elevator for a minute and get out shortly. It's not long enough in the elevator for the phone to say "No Signal" but it's still long enough for the data connection to hang and never bother hooking back up when I get off the elevator.
I'll try again though... will report back.
same here .... i tried the three options but problem persist
I have tried the codes above, including disabling dormancy but my internet still will not connect to the internet. Please help.
I'm with Optus (TPG) and I never really see H. It's either 3G, or H+.
I tried disabling H+ (option 2), and like the other guy now I only see 3G.
My Speedtest with only 3G was:
Down - 228.2kB/s
With H+ enabled (option 3), my Speedtest was:
Down - 482kB/s (but it's been as high as 1103.9kB/s in previous tests.
For now I'll just keep it as it is and put up with the occasional freezes. Hopefully it's fixed soon in a firmware release.
i cant seem to get the codes working.. after i dial *#301279# nothing happens, no menu nothing. tried on my wife's galaxy s 2 same thing.. is there an app to disable HSDPA?
\\Issue solved
Is this issue mainly due to the carrier?
I did not have this problem b4. Now I found that my phone might suffer from this.
Tried to disable the H+ or H & H+ at the same time, it seems the issue is still there.
I am on Vodafone Australia network. And I just raised this similar topic on Whirlpool, if you guys would like to discuss this network problem on an OZ forum, plz refer to the below
http://forums.whirlpool.net.au/forum-replies.cfm?t=1744684
Cheers
Updating to XXXKG2 fixed 90% of my problems, on vodafone au.
Sent from my GT-I9100 using XDA App
MealsOnWheels said:
Updating to XXXKG2 fixed 90% of my problems, on vodafone au.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
For me it's still the same, coming from KF2 to KG2. Will try KG3.
Any one with new modem firmware that 100% fixed the 3G drop/stuck connection(only see upload sign lit) bug? I am running KG1 modem(stock rom no root) and still experiencing this issue on ATT in Bloomington, Indiana USA.
I also realized S2 uses Infineon modem chip which is the same supplier for the iPhone3G that had the 3G slow down, drop call issue..
Could this issue be the chip at the end?? Why would Samsung taking forever to fix this critical flaw on I9100??
I'm on 3 UK. Had the cutout on KG1 and KG2. But it's definitely gone away in KG3.
I'm on Airtel India on KG3 and I still have the data stalling issue.
Seems to me like this issue surfaces more when I'm at home on wifi and then step out to data.
Trying out these service codes now to see if it helps to turn off high speed data.
It would make sense for Samsung to include these settings in the rom itself even for those without issues but want to save battery.
Sent from my GT-I9100 using Tapatalk