Related
Hey guys.
I've been attempting this all morning and so far I've had no luck. I have a VodafoneAU Legend which I updated to the official 2.2 yesterday. But now I want to try root.
I've been trying to follow the HBOOT 1.01 guide but there's a few problems. First, I cannot connect to the phone with adb unless it's in htc sync mode. No other mode will work. So when it's time to copy testimage.zip to the card I have to change from sync mode to disk mode, whereby adb loses it's connection. What do I do about this? Is it a driver problem (in Win7 here) or something else?
Thanks,
Dave.
Ok, the first problem were drivers.
Now I can't finish the second guide. When I try using clockwork to install the firmware.zip, the phone just boots to the red triangle. What do I have to do?
Dave.
So I pressed the up button/power combo at the red triangle and get the Android system recovery. Selecting "apply update.zip" says it can't verify. What do I do? Is this guide for my phone or do I need to follow something else?
I don't understand this guys. Anyone help? I'm thinking since this is a step to root the phone, I'm not actually rooted yet so I can't use the clockworkmod? Then what is the guide for? The guides at unlockr don't mention what firmware/hboot they work for so I'm not keen to try them yet.
Read the guide on fake flash. You need the recovery file named "update.zip" in the root of your sd to proceed..
Sent from my Legend using XDA App
whitetigerdk said:
Read the guide on fake flash. You need the recovery file named "update.zip" in the root of your sd to proceed..
Sent from my Legend using XDA App
Click to expand...
Click to collapse
But isn't that what Rom Manager does? Download the update.zip then run it? Man this is getting even harder to understand.
Edit: And this is left out of the HBOOT 1.01 guide because.....????? When I work this out I'll write a PROPPER guide, lol.
Just checked and update.zip is on the card.
So which part of the guide am I getting wrong?
Decided to reinstall phone with the official froyo release and am now ready to try this again. Is there anyone that will walk me through the process? I will write a complete guide if the "gotchas" are still there.
i feel for you ... hope you get it fixed... thats one of the reason i havent dared messing with the phone because i've seen a few post like yours where something didnt go quite as described... for whatever reason... and im sure the answer is out there but just not within the guide instructions... i guess there is no way to gather all gotchas because there are so many environment variables...
good luck
and please share your technique
Just saw gobczak's thread in the developer forum having similar troubles with Vodafone UK phone, getting the red triangle at reboot. I'll keep an eye on his thread and see how he goes with it.
Did you run the stage1 and stage2 bats while in recovery?
dezzadk said:
Did you run the stage1 and stage2 bats while in recovery?
Click to expand...
Click to collapse
No because the guide didn't say to.
The thing is it seems I'm only stuck on the part where the firmware.zip file has to be flashed. The guide says to use clockworkmod for this. But when I try installing the clockworkmod recovery it gives some file verification error. Isn't there ways to do this via the pc, either through those batch files, adb etc? Or will that fake-flash update.zip file work?
jabbado said:
No because the guide didn't say to.
Click to expand...
Click to collapse
As I just posted on the other forum, I think you need to skip that step in guide 2 and go straight onto guide 3 after you have flashed the LEGEIMG.zip, rebooted, and then removed LEGEIMG.zip from the SD card.
Guys I've got to the point of downgrading to 1.31. But when I run the first batch file it just hangs at the "Writing zip" part, with the htc logo on the screen. Is there any way to fix this?
Can someone please explain this part of the guide:
Phone will reboot and find LEGEIMG.zip on your sdcard, copy it into RAM and check it. If you get CID error at this point, then you don't have goldcard.
Click to expand...
Click to collapse
Ok, so I don't get an error. I get nothing. The phone just boots to the fastboot screen. If I press the power button it goes to the hboot screen and I can see the messages of loading LEGEIMG.zip. But the guide doesn't say to press anything.
So should I or shouldn't I press the power button? Also, if I try making the goldcard again, at which point in the guide do I start from again? The entire process or just copying LEGEIMG.zip to card then rebooting phone? I mean, will all the other things like flashing misc1-2.img still be there?
Guys I finally got this working.
The first problem was with the goldcards. For whatever reason formatting them with the win7 format tool just wouldn't work. I had to use the command-line format tool, setting the block size etc manually.
The second problem was the unnecessary steps in the guide. A few people helped me out with this (namely blackbart at the Aus Whirlpool forum), but basically in the second step you can stop after flashing the LEGEIMG.zip. The updating froyo part isn't needed - for my phone anyway.
Then when running the batch files in the third part, for whatever reason the first batch would keep hanging at 'writing zip...' and I needed to remove the battery to unfreeze the phone. flannigan, also from the Aus Whirlpool forums suggested to just go on to the second batch file. This worked!
So my Legend is now finally a true Legend
Anyway, thanks for the help everyone - couldn't have done this by myself.
Dave
Great news, I think we need a new guide focused on rooting for HBOOT 1.01 / Stock Froyo to clear up the inconsistencies in the existing one. It's a minefield for a noob (or a rite of passage!), a revised guide will certainly save a lot of time and frustration for those taking this road in the future.
Sent from my HTC Legend using XDA App
EpicSauce said:
Great news, I think we need a new guide focused on rooting for HBOOT 1.01 to clear up the inconsistencies in the existing one. It's a minefield for a noob (or a rite of passage!), a revised guide will certainly save a lot of time and frustration for those taking this road in the future.
Click to expand...
Click to collapse
I'll write one if ya's want. I wanted to include little tidbits like downloading the apps required (visionary, rom manager etc) from the market then backing them up to the card with Astro so if it goes all wrong and you have to start again, you can just install them all from the card Also on using adb to push the files (roms, img's etc) when the guides say "copy this blah blah". Much quicker than changing to disk mode and back. Sound good?
Sounds good! Happy to help and add my 20c worth along the way. The existing guide has got the meaty bits, a new guide would cull the stuff not relevant, help fill in the gaps and alert to the pitfalls we've fallen into.
jabbado said:
I'll write one if ya's want. I wanted to include little tidbits like downloading the apps required (visionary, rom manager etc) from the market then backing them up to the card with Astro so if it goes all wrong and you have to start again, you can just install them all from the card Also on using adb to push the files (roms, img's etc) when the guides say "copy this blah blah". Much quicker than changing to disk mode and back. Sound good?
Click to expand...
Click to collapse
I agree... i've done my reading since june of last year but then didnt check for another 4 months... and so many how to's pop up with various ways of doing it depeding on the situation... a lot of those howtos were consolidated howtos which sometimes make intermediate steps unenecessary (may be in some cases causes more head aches since it didnt take into considerations on newer version of hboots...etc)... an updated how to will be much appreciated...
And you're right the most important pre requirement is to have a safety net ... so starting with how to create a back up in case you screw it up is a must!
but im glad it worked out for you!
Ok, so I recently bought a used dell streak off of a friend, and although I like it, I don't like dell's ROM, so my main goal here is to install a custom rom.(Specifically, streakdroid 2.0.0). I was able to root my phone, however I am having issues flashing the recovery image,to get to installing the custom rom. I have tried using rom manager to install clockwork, and when I do it says it installs fine, but when I tell it to reboot into clockwork, the phone just boots up normally into android.When I boot using power + vol up + vol down, it just boots into the stock recovery image. I have also tried using fastboot to flash the recovery image using the clockwork recovery image for the dell streak. The command line says the flash was completed, yet again when I boot into the recovery image it is still the dell streak stock recovery image. I also renamed the file: system/ect/install-recovery.sh to system/ect/install-recovery.sh.bak , following another post's advice, still no luck. I have spent several hours looking on forums on how to fix it, and can't find anyone with this problem on the dell streak. I have also tried to find a way to install a custom ROM without using a recovery image, but haven't been able to do that either. Any help at all would be greatly, greatly appreciated, even a possible tip to point me in the right direction.
For some more info about my phone, I do believe that it might be a corporate edition, I don't know if that would effect anything or not, the other details are as follows:
Model Number : Dell Streak
Android version: 2.2.2
Baseband version: GAUSB1A135100-US
Kernel version: 2.6.32.9-perf
OEM Version: GAUSB1A135100
Build number : 15609
Custom Recovery – Prevent Overwriting on Dell Streak
I already tried the advice given on that link. I can't even get into the custom recovery image even one time.
Also I meant to post this under the Q & A forum, if it's possible for someone to move this post, I'd appreciate it.
damoshemeister said:
I already tried the advice given on that link. I can't even get into the custom recovery image even one time.
Click to expand...
Click to collapse
Rename install-recovery.sh before you install the custom recovery. If the phone boots even once the recovery is over written with the stock recovery if you don't.
Also - there are a bunch of posts that state that ROM Manger does not work on the Streak.
I have also tried using adb to flash the recovery image after renaming the file and immediately booting into the recovery image after installing. Still same issue. Also without even renaming that file, I believe I am still supposed to be able to access the custom recovery image one time.
You do have to enter the stock recovery to get into ClockworkMod or StreakMod. It's what you do after you get into stock recovery that takes you into CM or SM.
Rather than tell you how to do it, I will tell you to READ those guides posted above for the answer. If you don't want to do that, then you should stop messing with something you don't understand before you brick your new toy! The Streak doesn't root, recover, or update ROMs like other Android devices.
Ok, while I did have legitimate issues with rom manager it turns out I had a misunderstanding of how to install streamod,as you pointed out. Please forgive me, I was pouring over a ton of information in a very short amount of time, including being completely new to android, how to install apks from a pc, jailbreaking, using adb fastboot to flash images, all for the first time. I didn't realize you had to update from within the stock recovery image to install streakmod. I appreciate your help allot. I was able to successfully install streakdroid like I wanted, wouldn't have been able to do it without your help. Thanks again.
Glad to see you got it up and going. I can understand your frustration. The first time I played with my Streak I bricked it and took it to someone to fix and he didn't know much more than I did about it.
When I got it back unfixed, I spent several days reading and now consider myself fairly proficient in the art of flashing, although I haven't made any steps into cooking up my own ROMS or all the other technical stuff that goes with what these unselfish guys go through for us.
Have fun!!
damoshemeister said:
Ok, while I did have legitimate issues with rom manager it turns out I had a misunderstanding of how to install streamod,as you pointed out. Please forgive me, I was pouring over a ton of information in a very short amount of time, including being completely new to android, how to install apks from a pc, jailbreaking, using adb fastboot to flash images, all for the first time. I didn't realize you had to update from within the stock recovery image to install streakmod. I appreciate your help allot. I was able to successfully install streakdroid like I wanted, wouldn't have been able to do it without your help. Thanks again.
Click to expand...
Click to collapse
Sorry to have been so tough on you. That's the only way to get people to UNDERSTAND what they are doing to their devices. Now that you found it on your own, you will remember it. You also stumbled onto some other info that may not pertain to your situation now, but you will remember seeing it in the future when you need it!
Here is another concise guide that is excellent and a short read:
http://forum.pocketables.net/showthread.php?t=8715
Good Luck!
kraz
Yea, I definitely understand where you guys are coming from. I do like to try to figure stuff out on my own, and did spend some considerable time reading before I posted on this forum. You guys gave the exact help I was looking for, just a nudge in the right direction. Knowledgeable people can save newbs like me hours in frustration.What threw me off was partially bad luck, but definitely due to incomplete understanding as well. It was the combination of rom manager not working , and me not properly understanding how to install streakmod that led to me thinking it had something to do with the bootloader blocking the recovery image from being flashed. I thought I was gonna end up having to flash the bootloader but definitely didn't want to do this as that would have been very vulnerable to bricking. I read the basics on the different images, and what they did before I tried anything. I did end up at one point with my streak not being able to boot, or update from an update.pkg but since I knew I didn't touch the bootloader, I knew I should be able to get it up and running again. THanks for the link, I will definitely read it.
did u try
flash the clockworkmod or the other recovery image. when the flash was done, it will boot the dell streak, meanwhile, press vol up and down, boot into the recovery mood again, I mean NEVER let the streak boot into the rom afte u flash the image.
Sent from my Dell Streak using XDA App
marvin02 said:
Rename install-recovery.sh before you install the custom recovery. If the phone boots even once the recovery is over written with the stock recovery if you don't.
Also - there are a bunch of posts that state that ROM Manger does not work on the Streak.
Click to expand...
Click to collapse
what do i rename " install-recovery.sh " to?
thanks
I renamed mine to "install-recovery.sh.bak", but I have seen "do-not-install-recovery.sh". In other words, you can rename it to whatever you want.
Strephon Alkhalikoi said:
I renamed mine to "install-recovery.sh.bak", but I have seen "do-not-install-recovery.sh". In other words, you can rename it to whatever you want.
Click to expand...
Click to collapse
every time i try to rename it i get a failed message. any other suggestions? thanks for the help in advanced
You have to mount the internal SD as R/W, it's in R/O it sounds like
trucutu62 said:
every time i try to rename it i get a failed message. any other suggestions? thanks for the help in advanced
Click to expand...
Click to collapse
As noted by the post just prior to this one, the system partition is read-only. You need to change it temporarily to read-write using a file manager that can do the job. I used Super Manager, but there are plenty of root file manager apps on the Market that can do the job.
Hello guys,
please dont think i am lazy, i have read most of the topics here but i am now just more confused then before. There are so many solutions, do's and dont's that i have no idea how to do it.
I have managed to root my streak running android 2.2
I would like to flash it with a newer custom rom but i have no clue how to do it. Could please someone tell me step by step. I have downloaded half of the links shown here in the forum but still have no clue.
Also, could someone tell me what rom to pick. I wanted to flash the streakdroid 2 but i have read so many comments about low performance and other problems. Any other rom recommended.
Any help is greatly appreciated and i hope one day to be able to help others.
TIA
Ok first things first you need to flash streakmod or clockworkmod via fastboot. I prefer streakmod as I sometimes get errors with nandroiding on clockwork. Follow the guides for flashing custom recoveries in the threads for them. Once you've got a custom recovery just place the rom of your choice onto the root directory of your SD card (not in a folder). Then boot into recovery by holding volume up + power. At the first screen select option 2. The screen will turn black, press power. Once in the custom recovery select install update. Navigate to the custom rom and select it. Wait a minute for it to complete then select reboot. You're all set. I recommend booting back into recovery and doing a nandroid back up after you get everything set up. As far as roms go, I'd go for dj-steves 1.9.0 its the best IMO. Good luck!
Sent from my HTC Vision using XDA Premium App
Android Development is not for questions or Problems
Moving to General
Use StreakMod Recovery if you want a custom ROM, To flash a stock ROM you use the stock recovery. See this thread for a tool to help you flash the recovery you need. The latest version of StreakMod eliminates the step of hitting the power button and the nandroid backups work.
For stability use the latest Strekdroid Froyo version (1.9.0), SimpleStreak or a stock ROM. Read the development section here for other options.
Here is a page of Streak related links, lots of stuff there you may want to look at.
dosada said:
Hello guys,
please dont think i am lazy, i have read most of the topics here but i am now just more confused then before. There are so many solutions, do's and dont's that i have no idea how to do it.
I have managed to root my streak running android 2.2
I would like to flash it with a newer custom rom but i have no clue how to do it. Could please someone tell me step by step. I have downloaded half of the links shown here in the forum but still have no clue.
Also, could someone tell me what rom to pick. I wanted to flash the streakdroid 2 but i have read so many comments about low performance and other problems. Any other rom recommended.
Any help is greatly appreciated and i hope one day to be able to help others.
TIA
Click to expand...
Click to collapse
I don't have time to go into detailed steps for you right now, but here is what I can recommend:
Download and uncompress MultiRecovery Flasher from here:
http://forum.xda-developers.com/showthread.php?t=1000455
Flash StreakMod Recovery.
Download Simple Streak from here:
http://forum.xda-developers.com/showthread.php?t=1113256
Save this on the root of your sd card. For ease of use you can rename it update.zip
Install the drivers on your computer (assuming windows) for the Dell Streak. You can get them here:
ftp://ftp.dell.com/Handheld/R288920.exe
Reboot into fastboot mode. To do that, with the phone off, hold down the power button and the camera button at the same time. When the white screen comes on, release the buttons and then touch the fastboot "button" when presented on the screen. Now plug the usb cord in and the bottom of the phone should say something along the lines of Fastboot Mode or similar.
Run the MultiRecover Flasher and choose StreakMod Recovery. When this is done (it takes less than 1 minute normally), you need to boot into your new recovery. With the phone shut off, hold the power button and both volume buttons at the same time. When the screen with the 4 choices appears, choose option #2 (should be something about upgrading using update.pkg or similar). StreakMod will load. Browse the options here to see what's available. Go into advanced, then nandroid and make a full nandroid backup. This will take 5 - 10 minutes or so. Then do a data wipe/factory reset. Then the option to apply update.zip from sd card. If you had named your rom to update.zip and put it in the root of the sd card, choose update.zip from sd card again. If not, choose the other option and be presented with a list of files/folders on your sd card. Find your rom's .zip file and apply it. When it's done choose reboot now and enjoy. If you run into problems booting the first time, shut the phone down (it may require a battery pull to do so) and power on using the power button and both volume buttons and choose factory reset at that menu (this is the one you used to get into StreakMod recovery earlier). The device will end up rebooting twice (you really can't tell since it's always the Dell Logo, just takes longer) and you should be good to go.
If you have any questions, post them here and someone will be happy to help you along. I'm not an expert by no means, I've just done this several times as I like trying out the different Roms. The nandroid backup and restore options in Streakmod recovery is a godsend. If I install a rom and have problems, I can revert to what I had (settings, apps, layouts, everything) in just a few minutes with no computer required, all from the phone. Learn to love it.
I get so sick of all these retarded questions and threads.I have never seen anything like this...where EVERYTHING IS ANSWERED,EXPLAINED and still people say "Don't think I am lazy".
I know,if you don't have anything nice to say,don't say it...but this is way too much.
shinydesert said:
I get so sick of all these retarded questions and threads.I have never seen anything like this...where EVERYTHING IS ANSWERED,EXPLAINED and still people say "Don't think I am lazy".
I know,if you don't have anything nice to say,don't say it...but this is way too much.
Click to expand...
Click to collapse
I agree with you to a point, however when I bought my Streak back in February the first thing I did was come to this forum as I remembered it from my AT&T Tilt days. I started reading...alot. I got more and more confused myself. I read stuff like 318, 309, UK versions, US versions, etc. I didn't know what was compatible with what. I read more, and finally attempted something and it worked and I was hooked. But mind you, I'm a computer geek and understand how things work in the computer world. At work, I'm surrounded by people who don't and it amazes me how much hand holding I have to do for basic tasks. So I get it when people say they are confused. My rationale behind giving the OP the instruction that I did is that once he does it one time, he'll get more comfortable, understand the process a little more, and maybe start to understand some of the other stuff. Then who knows, in a couple months he may be motivated to make the next bada$$ rom for our loved devices. It could happen... ;-)
We all have to start somewhere.....and this forum is the place for it to happen, because of its wonderful, selfless members who are willing to lend out a helping hand expecting nothing in return.
Thank you so much guys. Got it all working and flashed the rom i got recommended, works perfectly.
I really havent been lazy. You just have ro understand that the start,is really hard for a beginner. I need to get into some basics, to understand what and why. I have flashed hundreds of wm phones but this is something different. I prefer to ask and be on the save side. How does it help either of us if i brick the device and ask after?
I really appreciate the people which dont get tired explainig something for the tenth time, this are the people which make this as big as it is.
Again, thank you so much for helping. I hope i ll be able to return the favor one day.
Sent from my Dell Streak using XDA App
strick242 said:
I agree with you to a point, however when I bought my Streak back in February the first thing I did was come to this forum as I remembered it from my AT&T Tilt days. I started reading...alot. I got more and more confused myself. I read stuff like 318, 309, UK versions, US versions, etc. I didn't know what was compatible with what. I read more, and finally attempted something and it worked and I was hooked. But mind you, I'm a computer geek and understand how things work in the computer world. At work, I'm surrounded by people who don't and it amazes me how much hand holding I have to do for basic tasks. So I get it when people say they are confused. My rationale behind giving the OP the instruction that I did is that once he does it one time, he'll get more comfortable, understand the process a little more, and maybe start to understand some of the other stuff. Then who knows, in a couple months he may be motivated to make the next bada$$ rom for our loved devices. It could happen... ;-)
We all have to start somewhere.....and this forum is the place for it to happen, because of its wonderful, selfless members who are willing to lend out a helping hand expecting nothing in return.
Click to expand...
Click to collapse
Motivation and Impressive!! +1
Sent from my Dell Streak while away from alienware
Hello guys,
i got a serious and frustrating problem here.
A few days ago my xoom was stuck on the M screen, so I used a thread in the forum and recovered it.
It solved myh problem back then, but since I had 3.2 before this and the solution injected me with Android 3.01 my problems started to show themselves.
the first one is that
<b> Through Fastboot, RecoveryMod, ADB </b> and any other way you can Imagine to install a new ROM or even remove or create a file,
All of them show success message but when I check them out I see no changes.
i tried fastboot and Recovery to install nearly every ROM,Recovery and bootimage in this site but so far it was wild goose chase.
so I want to ask if I'm doing anything wrong or if you need any more information here, but please help me with this
wow I cant believe it, All these masterminds here and no answer to my distress signal??
Guys I am so in trouble and this is the only place I hoped to get answered.
I can provide you with more info if you need, but please dont say I'm on my own here.
all these years this forum was the last hope for me.
i know I'll get my answer here one day
You are not being very clear about what you have done,, but I'm assuming that you reinstalled the stock image that got you back to HC 3.01. Can you see if you are able to get OTA updates to get you back to at least 3.1, or 3.2 if possible?
If that's my problem forgive me please, Ive written that post in 3:00AM
for the sake of clearity I should add some info:
1. I even tried stock ROMs but you see I cant even flash them (Not from Recovery nor Fastboot) the steps seem successful : it opens the package,it installs them and it says everything was a success. But when I restart the device I see nothing has changed.
2. OTA updates are the same, they keep downloading and when the sysem reboots to recovery to install them it cant find them.
3. You dont believe it if I say even files and programs that I remove from device by my hand(Android OS) are back after the first restart.
And you see it's dark magic! everything from a file to a partition are back by one reboot. I dont know what should I call it but I havent seen anything like it on the whole Internet.
So seems like I should make a competition for the xda experts here
Can you publish it so all of them can see it?
Mohfath said:
If that's my problem forgive me please, Ive written that post in 3:00AM
for the sake of clearity I should add some info:
1. I even tried stock ROMs but you see I cant even flash them (Not from Recovery nor Fastboot) the steps seem successful : it opens the package,it installs them and it says everything was a success. But when I restart the device I see nothing has changed.
2. OTA updates are the same, they keep downloading and when the sysem reboots to recovery to install them it cant find them.
3. You dont believe it if I say even files and programs that I remove from device by my hand(Android OS) are back after the first restart.
And you see it's dark magic! everything from a file to a partition are back by one reboot. I dont know what should I call it but I havent seen anything like it on the whole Internet.
So seems like I should make a competition for the xda experts here
Can you publish it so all of them can see it?
Click to expand...
Click to collapse
Actually, I have seen someone with the same problem here on this forum, but I can't recall exactly what the solution was.
Can you describe, step by step what you are doing, what cable you are connecting to your pc with, etc?
okantomi said:
Actually, I have seen someone with the same problem here on this forum, but I can't recall exactly what the solution was.
Can you describe, step by step what you are doing, what cable you are connecting to your pc with, etc?
Click to expand...
Click to collapse
That would be relief to know this could be solvable.
I will look more too.
As for your post I must say:
1. I plug the Xoom to the PC using the included cable
2. I start the xoom and start fastboot
3. on the PC system has the drivers and completely knows it
4. I start with SDK:
I. Fastboot oem unlock (Completing onscreen instructions and reboot device)
II. Fastboot mode again I use Fastboot flash boot boot.img
III. Continuing with Recovery,System
IV. Rebooting the device anything is the same.
My ROM is unchanged by the process and keeeeeeeeps giving the damn error of System process error please submit
5. And with ClockworkrecoveryMod I have the stock ROM on my sd card.
I. I choose install zip from sd card.
II.Choose the correct zip file and start flashing.
III. Choosing Wipe Data/Factory reset will take the device into a complete hang. unless I first use the mount page to mount the System/Data
IV. I reboot the device and ..... you know nothing changed.
so thats my story.
Still hope to find something about it.
Thanks...that was helpful. But now I want to know the following:
Were you rooted before the trouble started?
What did you do to recover?
If rooted, what version of CWM recovery did you have installed? Did you do a nanadroid backup? (I guess the answer is no, because you could have just restored with that).
What recovery are you accessing when trying to flash a zip file?
If you can answer these questions I will continue to wrack my brain trying to recall where I saw that thread.
Edit: please check out this thread http://forum.xda-developers.com/showthread.php?t=1370312
Some of what I said to him may help you .
okantomi said:
Were you rooted before the trouble started?
What did you do to recover?
If rooted, what version of CWM recovery did you have installed? Did you do a nanadroid backup? (I guess the answer is no, because you could have just restored with that).
What recovery are you accessing when trying to flash a zip file?
If you can answer these questions I will continue to wrack my brain trying to recall where I saw that thread.
Edit: please check out this thread http://forum.xda-developers.com/showthread.php?t=1370312
Some of what I said to him may help you .
Click to expand...
Click to collapse
Being rooted? -> Yes, The world is more beautiful with root!
to recover -> I followed this: http://forum.xda-developers.com/showthread.php?t=1097997 Shame it was Android 3.0
I use ClockworkRecovery 3.0.0.28 and I cant upgrade it cause of ... you know
And for your help I must say you are definitely the most caring person I know...
I'm off to check the provided link now
I was thinking of something that might be a reason.
I have this tiny problem:
When I go to CWM and choose Erase userData/Factory Reset Device Hangs
Click to expand...
Click to collapse
I was thinking of may be the userdata partition is corrupted and I gotta find a way to flash it completely.
Somehow I used Fastboot utility to do this and after saying Success, Nothing changed again.
Do you know any other way to physically do this job?
This is my first post on here, but I've used these forums before to root my S3 and at one time my current S4. My problem is with MF3... I used
this post [http://forum.xda-developers.com/showthread.php?t=2387577] to root my phone once, but since I couldn't install TWRP or CWM, I thought I could downgrade the software version with Odin. Well, I was wrong, and I unrooted my phone in the process... Upon trying the same technique I mentioned earlier, it now says "permission denied" upon entering the first prompt <<cd /mnt/extSdCard>>
AND, I can't use Odin to factory reset. Using posts such as this [http://www.youtube.com/watch?v=hZTTTk7vbVM] doesn't seem to work either. When putting my phone into download mode, I pull up Odin, and select the file in the link (the software file .tar I think), it says it fails shortly after starting.
Really, I need help with two things:
1. Obtaining root access
2. Resetting phone to factory settings
I might not have to do a factory reset, but I've noticed my wifi will NOT enable since I unrooted and this is a big concern for me. I know that all my troubles are because the bootloader is locked (and I'm messing with stuff I don't fully understand...), which is why I'd like help obtaining root again in the final hope that Safestrap [http://forum.xda-developers.com/showthread.php?t=2448925] is the answer I'm looking for so I can use my favorite ROM, LiquidSmooth!
PLEASE help me any way you can! I've tried to provide as much information as I can think of, but I'm new to this stuff, so bear with me. I have no real experience in rooting and whatnot, but so far, I've followed directions by users of this forum, so I have faith that there's a solution to this mayhem. Thanks for any help you can provide! =)
Your first mistake was not reading about what you can and can not do while on mf3. Your second was trying to put a recovery on. And your third was trying to use Odin to down grade your firmware.
I'm surprised your not having issues booting. The only way right now to get your phone back to normal is to see if best buy will flash the mf3 firmware for you
Edit, read this http://forum.xda-developers.com/showthread.php?p=45359306
jd1639 said:
Your first mistake was not reading about what you can and can not do while on mf3. Your second was trying to put a recovery on. And your third was trying to use Odin to down grade your firmware.
I'm surprised your not having issues booting. The only way right now to get your phone back to normal is to see if best buy will flash the mf3 firmware for you
Edit, read this http://forum.xda-developers.com/showthread.php?p=45359306
Click to expand...
Click to collapse
I guess you're trying to be helpful, but your condescending tone isn't helping. I READ everything, I just don't UNDERSTAND everything... The second paragraph actually provided some help, so thanks for that. I was just hoping for something I could do myself to re obtain root so that I can try the Safestrap method I provided in my original post. I will post a reply to the root method post and see if anyone can help me there, since that's my main issue is not being able to get root access back. I don't have any problems booting though, only when I boot into recovery mode do I get a loop in which I just have to get to the Samsung warning screen and select "cancel (reboot phone)". Thanks for reading this and providing some direction.
jeremythetree said:
I guess you're trying to be helpful, but your condescending tone isn't helping. I READ everything, I just don't UNDERSTAND everything... The second paragraph actually provided some help, so thanks for that. I was just hoping for something I could do myself to re obtain root so that I can try the Safestrap method I provided in my original post. I will post a reply to the root method post and see if anyone can help me there, since that's my main issue is not being able to get root access back. I don't have any problems booting though, only when I boot into recovery mode do I get a loop in which I just have to get to the Samsung warning screen and select "cancel (reboot phone)". Thanks for reading this and providing some direction.
Click to expand...
Click to collapse
No, your main issue is that you don't understand what you are reading and you shouldn't be doing anything to your phone until you do. Dozens of people just like you pass through this forum everyday with similar issues because they didn't read or take the time to understand what it was that they did read. Someone takes the time to tell them to read and learn and they don't listen or think they don't have to. Then, they screw their phones up and come back here crying for help. So it's not a condescending tone, it's people getting tired of the same crap. You admitted that you didn't understand everything you read so why would you do anything to your phone before you do understand it? Can you not see the problem?