First of all sorry If I missed any info already posted on forums, I've spent 3 days reading Athena sub forums. And didn't found any truly working solution. Problem is as always - not reading info till last step and then trying, I've tryed to write HardSPL from x7501 to x7500 and got only bootloader possible. If to exactly describe things what I did and what now I need:
1. Phone from Netherlands - wanted to change language, so needed HardSPL (orig. spl was ~1.02 if remember correctly)
2. Wrote x7510_HSPL365 (heh, why do I did that ) After got only bootloader but had HardSPL.
3. Then wrote x7510_3_05_stockSPL_ForWarrantyOnly.zip (most stupid thing I did in few year I think ...)
As a result I have now ATHE100 with SPL 3.05.000 And even can't write native ROM (Advantage_HTC_NLD_2.21.404.1_1.50.00.00_Ship.zip) because phone writes that ROM is for 1.02 SPL and my SPL is 3.05, Downgrade not allowed.
Using mtty - I have Level = FF (Not hard SPL)
Any chances to revive?
B.R.
Alkapone
Alkapone said:
First of all sorry If I missed any info already posted on forums, I've spent 3 days reading Athena sub forums. And didn't found any truly working solution. Problem is as always - not reading info till last step and then trying, I've tryed to write HardSPL from x7501 to x7500 and got only bootloader possible. If to exactly describe things what I did and what now I need:
1. Phone from Netherlands - wanted to change language, so needed HardSPL (orig. spl was ~1.02 if remember correctly)
2. Wrote x7510_HSPL365 (heh, why do I did that ) After got only bootloader but had HardSPL.
3. Then wrote x7510_3_05_stockSPL_ForWarrantyOnly.zip (most stupid thing I did in few year I think ...)
As a result I have now ATHE100 with SPL 3.05.000 And even can't write native ROM (Advantage_HTC_NLD_2.21.404.1_1.50.00.00_Ship.zip) because phone writes that ROM is for 1.02 SPL and my SPL is 3.05, Downgrade not allowed.
Using mtty - I have Level = FF (Not hard SPL)
Any chances to revive?
B.R.
Alkapone
Click to expand...
Click to collapse
Hi.
Could you upload the rom you have and put a link in the wiki as a few people in the last 6 mths have been unable to find it.
In regards to your problem I suspect you need to talk to cmonex
Try sending a pm
Sure, I will post link tomorrow, will put to rapidshare ... and regarding disturb of cmonex, maybe bad idea, as seems man busy a lot. Maybe someone had already same (similar) situation and will see this thread Also maybe there is possibility to remove from rom file any SPL headers or something that Athena won't check them or something, as no difference if to try from windows or sd card flashing, same story - SPL version too low.
p.s. Yeah, I've searched for that file also few hours starting from this forum But google makes miracles sometimes (usually)
p.s.s. Link on wiki updated, file available for download again.
B.R.
Alkapone
thanks for uploading the file.
good luck with the unbricking
100+ views and nobody knows nothing ;( seems last chance really to disturb cmonex ;(
B.R.
Alkapone
Maybe any news from anybody? As Cmonex was only interested in 'Donation' and after payment was done he haven't found any single minute to help me nor to respond to my messages ;( Maybe someone have tool to create Gold card for Athena device?
B.R.
Alkapone
Alkapone said:
Maybe any news from anybody? As Cmonex was only interested in 'Donation' and after payment was done he haven't found any single minute to help me nor to respond to my messages ;( Maybe someone have tool to create Gold card for Athena device?
B.R.
Alkapone
Click to expand...
Click to collapse
sorry for that error, I messaged you since then
Related
Hi,
I am new to this updating pocket pc lark and think i may have ruined my xda orbit. I have been following instructions from within the site and found a few downloads for updated roms and downloaded the "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe" and ran it to update my xda orbit. now when the device reboots it stays on the first screen which states:
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
Does anyone know how i can fix this?? and please can i have step by step detailed instructions???
god i feel like such an idiot!!
You and many others.
Its not broken - it requires either unlocking and reloading by IMEI-CHECK for 47 quid or wait for the promised O2 WM6 update ROM that hopefully can be used to reflash the OS on to your XDA, the same tools that you used to get yourself in this mess may also get you out of it - i've done exactly the same thing myself.
Or try it on with O2 and see if they will replace it, just say it locked up and when you rebooted it appears that the OS is corrupt/missing.
Cheers,
Steve.
arif101 said:
Hi,
I am new to this updating pocket pc lark and think i may have ruined my xda orbit. I have been following instructions from within the site and found a few downloads for updated roms and downloaded the "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe" and ran it to update my xda orbit. now when the device reboots it stays on the first screen which states:
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
Does anyone know how i can fix this?? and please can i have step by step detailed instructions???
god i feel like such an idiot!!
Click to expand...
Click to collapse
Well you are an idiot - you did not read the first post in the forum - read it and it will tell you what to do.
do you know where i can get the original os from and how i can get it back on my device as my device doesn't appear to connect to my computer anymore.
Any day now - apparantly
arif101 said:
do you know where i can get the original os from and how i can get it back on my device as my device doesn't appear to connect to my computer anymore.
Click to expand...
Click to collapse
Ignore the 'clever', retrospective criticism, from people who will claim that they've never done something similar...
The word is that O2 are due to release an upgrade rom soon, it may be the solution or may just be an upgrade that requires the phone to have a good OS on it already in which case you may need to contact IMEI-CHECK who can do it for under 50 quid.
It's a pity really - if the smart arses here could provide answers as quickly as they can criticism who knows there may be a solution available all ready, after all isn't that what this forum is for?
Just an idea, seeing as though the 'CID unlocking Warning' sticky appeared after dozens of people had made the same mistake, maybe next time the mods could put it up at the time and not after the event? possibly not the case here but it would have saved a shed load of your other members a major headache.
Cheers,
Ste.
Hi at all!
Sorry but my english is not very good!
I want to know how I can flash any ROM on my Herald!?? It is not branded (original HTC)! I've read something about CID, can anybody tell me what this means?
Do I have to "unlock the CID" für flashing any ROM on my Herald?
CID lock, is a provider lock so you can not install another ROM on your phone. Look in the Herald thread for HARD-SPL.
But before hand, you have to know what your SPL and IPL is. Go into bootloader(press camera and softreset button and then relase only softreset button) You will get a 3 color display with numbers.
Those numbers should start with SPL/IPL 4 or 5! If you see like: 1.08.0000 eg. then you can't use this program till you upgrade to SPL/IPL 4 or 5.
You do NOT need to CID unlock because Herald users have a backway of flashing. Hard-SPL is a dangerous tool and not 100% compatible with ALL phones. Before using it, be aware that you may brick your device permanently. The other way is MUCH safer. Most of the posted ROMs here use that way, with the occassional (but not always successful while it IS safe) USPL.
Either way, make sure you have a copy of the stock RUU in hand before you begin.
Ok!
I want handle my Herald with this Touch "Style"! And I want that my Herald can handle with micro sdhc cards!
What is the most "risk free" possibility? I dont want to kill my Herald!
My english is not very good, so that I can not read and understand every post!
ThX
PowderMarcello said:
Ok!
I want handle my Herald with this Touch "Style"! And I want that my Herald can handle with micro sdhc cards!
What is the most "risk free" possibility? I dont want to kill my Herald!
My english is not very good, so that I can not read and understand every post!
ThX
Click to expand...
Click to collapse
Any of the ROMs since they all come with "safe" ways to flash. HardSPL is done seperately.
Is it right, that I can flashing any ROM on my Herald?
Do I need to "unlock" my Herald, before this can be done?
On which way can I "unlock" my Herald?
Sorry but I'm a Newbie!!!!
You don't need to unlock anything. You can use any HERALD ROM. There's a thread I created around here that has instructions. Look for it under the Herald Mobile 6 forum and look for "Official flash" thread by ivanmmj.
Ok, thanks man!
I read this post from you http://forum.xda-developers.com/showthread.php?t=349701
What the F*** is Aserg's Policies??? ;-)
Sorry, that I didn't understand you, but I'm VERY STUPID!
Good luck flashing!!!!
Well, finally I get my device running up again! Unfortunately I wont publish it, maybe I will charge for total solution.
If u are interested, contact me by PM. This is a mail-service, so u have to send your device to me (so you pay for package sending)
Device OS recover 100%, Phone part recovered too.
Dont know If unlocks too bcoz my bricked device was unlocked state. Anyone that wants to send me a locked Herald (to test if unlocks too), would be really appreciated.
Thank you everyone for your support+post and if u want to donate, come on! Its time
See ya s00n
ps. for the Technically Experience devs/users, solution is not what u think its more complex and easy than you'll know!
wait....how did your herald get bricked?
i assume it was during a failed HardSPL
yes dude unfortunately
but the main here is to recover OS area... at least
I bricked mine and have just ubricked it. Its easy, connect USB to PC, enter bootloader, run any RUU wizard.
* Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
For details check http://forum.xda-developers.com/showthread.php?t=327046
Good luck
if the above does not work, try flashing using the USPL
tramuyo said:
So I started this. Sounds crazy, but it can be done...
Click to expand...
Click to collapse
Hi,
I think, it's a good idea. Actually I thought about something like your thread but if you don't mind I will say something in your thread.
I've got the same problem as you've got. Moreover, I've seen a lot of users posting on this forum, which have got such a problem with their Heralds. They boot only in tri-color bootloader mode and even RUU dedicated to our models doesn't work, saying Error 300. When we are trying to use MTTY to run getdevinfo command, as a result we can see error message. That's why RUU can't check the right CID in our devices.
All known solution for Heralds don't work with our problem. We should develop or wait for being developed by someone (Olipro,pof,mestrini,...) suitable solution. There are fine solutions for bricked Wizard or Hermes so it should be the way to unlock our Heralds, too.
My idea is to count all users with bricked Heralds to see the size of the problem and to show our great developers on this forum that it is important to find a way to unbrick our Heralds. Or maybe we should establish the prize for the person who will be the first in finding the unbricking method and than donate him? I think it could motivate some of them...
So, all bricked Herald's users, please leave your post in this thread, to show the world that this is a huge problem!
My Herald is Dopod C858 (I think so, because I'm not the first owner and this is what I was told about)
IPL: 1.11.0001
SPL: 1.11.0001
Regards.
a bricked one
here is one bricked, have htc p3450 with
ipl : 1.08.0001
spl : 1.08.0001
only bootloader and RUU with error 300
hope to find solution.
mine is bricked
IPL 1.08.0001
SPL 1.08.0001
trying with every solution: forced RUU, patched RUU and their DLLs, WM5 emulator, SD-Flashing + heradiag
I was thinking in something.. Do u remember PDAVIET first version for Prophet? You cannot flash PDAVIET WM6 directly.. U have to flash a special PDAVIET WM5 to prophet first, then PDAVIET WM6. And... when u got a bricked prophet device, the solution is...? PDAVIET WM5 special rom
So, i'm on it. working hard!!
Forced RUU? I know that the Univesal has an RUU to bypasses any and all checks and just starts flashing the ROM. I wonder if this would help... I assume the IPL is still fine unless it was overwritten in your devices because it's in a different memory address in devices with an SPL lower than 4.0.0.0. We would have to create our own RUU, though.
EDIT: After some research, this will not work. If the radio was damaged but the radio bootloader was not, there might still be hope, if the radio bootloader was damaged, then it's a no go.
Ive tried with Bepe's RUU (Polaris Premium BEPE ROM) but have no luck... maybe i should try to patch IPL/SPL in RUU check
keep goin...!
UPDATE 2:
HEY
how progress on unbricking
hopefully you get it working
first sorry about my language...
at last , what the members do??? (with IPL:1.08.0001 and error 300 )???
is there any solution?????
all the members with IPL 1.08.0001 and error 300 issue are welcome
ps. need RUU Blank Device application, or a customized RUU
anyone would help?
#2 just waiting days to post a NEW, KILLER topic bcoz im just getting bored
it means we should give our ppcs to repairman to change their motherboard??????????????
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
tramuyo said:
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
Click to expand...
Click to collapse
hey men...
you can test http://s131209249.online.de/e-plus/4350main.html
it can be usful
thank you for your suggestion.. its a German ROM, i will analyze it if can be converted to a another thing..
also ive found ExtROM updater (this is new) so Ill analyze that too
thank you bro
new solution
Dear all
Good day !
Please check below link :
http://s131209249.online.de/e-plus/4350main.html
I gess you can solve this Problem to First :
install WM5 ( no mater what language you use ,only to get your PPC back to work as a workable part )
secound :
Use WM6 to start as a usuall PPC ,
Please inform us ( we are Iranian WEB master in Iran for Update & every thing that will be involved) the results & solving some of our Friends Problems in iran too ,
thanks
Your Truly
Sami
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
tighoor said:
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
Click to expand...
Click to collapse
Dear Tighoor
Hope this Email Finds you in good Health & Great Sprit !
No dear ,, this is not Hardware Problem , because You know better than me , this Problem happens while you have Problem with Core ROM ,
I'm really get fascinated to hear the Result from you ,
I'm really Hopeful that this Problem get solve by this Method ,
Please don't lessen to YAS company !
Believe me , they don't have any information about PPC , they just import & warranty
parts !
I'm Purchase manager Of matrix warranty !(www.matrixfzcuae.com)
so I know their ways ,they just import & sell ,nothing More
Please kindly do this Method & I think this Problem will solve !
thanks
Best regards
sami
I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
i have flashed my unlocked athena x7500 with rom 6.1 by irius. the update breaks at 98%.
now i have only pixels on screen, and nothing happens.
in the Bootloadr following:
\
IPL-v1.00
\
SPL-v1.20 Olipro
Help... help... help...
Explain a little more by 'changing ROM'!
I was entering a rom and I was blocking the Athena by making a reset everything returned to normal but I can not enter another rom because I get this error.
As we enter the ATHENA in Bootloader I get:
, @
IPL-V1.00
, @ MFG
SPL-3.50.OliNex
Missing data?
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Montecristo said:
I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
Help... help... help...
Click to expand...
Click to collapse
cmonex has a automated fix for that, i think its under upgrading fourm
Irus, just to take advantage of this learning opp. What did Montecristo do to the device (or try)? What happen to it?
Kenjari said:
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Click to expand...
Click to collapse
I had installed the rom iRUs, then installed the new rom taxist and 98% were blocking ...
Try to re install and continues to bug me.
Please, my English is not very good ... some help ...
I made the downgrade but I continue to get the same error!
You used the wrong SPL Version
Montecristo said:
I made the downgrade but I continue to get the same error!
Click to expand...
Click to collapse
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
lakeman said:
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
Click to expand...
Click to collapse
I had the spl 3.5 when installing this ROM.
Already concerned with all rom and tell me the same problem.
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
xacsx said:
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
Click to expand...
Click to collapse
Exactly .. this is ... We saw your resolve?
IT WORKS!!!!
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4 <<< see here
my ameo lives again YEEEEEEEEEEEEEHHHAAAAAAAAAAAAAA
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
cmonex said:
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
Click to expand...
Click to collapse
YES!!!!!!!!!!!! YEAH!!!!!!!!!!! SI!!!!!!!!!!!!! SI !!!!!!!!!!!! MASTER!!!!!!!!!!!! GENIUS!!!!!!!!!!!! MAESTRO!!!!!!!!!!!! GENIO!!!!!!!!!!!!!!!!!!
Thanks!!!!!!!!!!!
Now'm going to donate some money for what they've done !!!!!!!!!! Thank you
Thansk!!!!!!!!!!!!!!! Xascx.
I´m very happy!!!!!!!!!!!
Sticky done, thanks CMONEX!
sergiopi said:
Sticky done, thanks CMONEX!
Click to expand...
Click to collapse
ahh I didn't notice you are a moderator thanks for stickying this.
mac number?????
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
meybaland said:
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
Click to expand...
Click to collapse
If you use router, the number is there....
Few questions:
How do you mess up the modeID and wifi anyway? Is it flashing to many ROMs? Does this automatically happen with the upgrade to spl 3.5? How does this happen?
Second, I have ran across my the mac address....but I'm having a blank....where can you find that at?
New member and a proud owner of an HD2 for the last 2 days. I got mine from a vendor in Chicago and it was an O2 branded unlocked phone. Not a big deal, after spending about 3 hrs trying to understand all the details of how to upgrade from 1.43 to 1.48. But i am trying to understand if 1.61 is an official HTC release, if so where can i download the ROM. Is there a Sticky which explains the diff between the ROMS. Is 2.01 coming out as an official HTC update or is it a cooked ROM. Is there a way to create a gold card without the help of the QMAT guys because they will be discotinuing their service soon. Please help me answer these questions, so that I never have to leave the WM paltform and go to IPHONE again. I love WM but just never worked for me. It looks like this HD2 might actually be working in my favor, so far happy.
I don't think you can make gold image without the qmat but the is really simple process that I follwed and it worked like a charm. 1.61 is the htc official realease for turkey region and is very fast and stable 2.01 is work in progress. here is the link to follow for gold image. this is the esiest to follow http://forum.xda-developers.com/showthread.php?t=602448
1.61
can someone post a link in the sticky for the 1.61rom so that everyone looking for it can have easy access. I have tried the fourm search option but it cannot search for numbers only. Or may be i am not doing it right.
ankur1234 said:
can someone post a link in the sticky for the 1.61rom so that everyone looking for it can have easy access. I have tried the fourm search option but it cannot search for numbers only. Or may be i am not doing it right.
Click to expand...
Click to collapse
the thread is near this one:
http://forum.xda-developers.com/showthread.php?t=598935
ankur1234 said:
can someone post a link in the sticky for the 1.61rom so that everyone looking for it can have easy access. I have tried the fourm search option but it cannot search for numbers only. Or may be i am not doing it right.
Click to expand...
Click to collapse
Her you go......
http://forum.xda-developers.com/showthread.php?t=578920
Hi - just to tag onto the end of this one. I did the goldcard thingy last night....i have an english o2 branded phone (or i did have at least) its stock 1.48 now. So, here's the question? have i got to run through the entire goldcard walkthrough from the start to go to the turkish rom ? and do i have to generate another goldcard thing again from qmat or can i use the same one?
Thanks
No! You have to do the Goldcard only once! then you can use it as much as you want unles you format it afcourse!
I've formatted my card (quick format) and it still works....