Hi there! Is it possible to create a separate profile HANDSFREE? I had qtek 8310 before,and it had this profile. And here I can't control ringtone volume,sound etc.
You can use PhoneAlarm for this purpose.
I just want to add a profile,without additional soft.Is it possible on WM6.5?
Problem
Hi, i have the similar problem.
My father bought touch 2, and if he connect it to a car handsfree, everything looks ok. If he call to some one, car speakers works.. BUT incomming calls absolutly ignores handsfree, ringing by handsfree, but ringing melody isnt default, and if he accept it, he can hear sound only from earphones on touch2.
If i use my TouchPro2 or Touch Pro, or nokia Exx, everything works fine.
Regards,
Mugsat
Related
I have a bluetooth headset working fine for calls, however have 2 questions. Has anyone gotten the headset working for things other than calls, such as media player? Also I have a problem with answering the phone with bluetooth turned off, if I turn it on while on the call and give it a minute to sync with headset and then try to transfer the call to the headset it won't work. But if I hang up and call right back the bluetooth will work.
I have the same problem but regrettably no answer: ( :? :? :?
bleuthooth headset
hello i have the bt g2 it s only 12 gramms and its works fine with my mda 2
You can listen media player with your headset ????
Without specific manipulation??? Not possible
:shock: :shock:
Hi every1!
Actually, until someone (HTC, Micro$oft, or anyone else) comes out with a new Bluetooth stack that support the full Handsfree profile, (something any BT equipped mobile phone already does) there is NO other use of headphones.
Even the more simple functions are not implemented.
I think this is the worst part of the Himalayas right now. A wonderfull piece of hardware, but very poor phone functions.... to say the least.
BT6023
This is the BT Handsfree that Im using now. So far so good. No connection failure.
Handsfree?
Hi nelsonlye!
Sorry to say, but, This is not a headset?
Could you be more specific on the brand and model and the "handsfree" functions it supports?
Does it allow Voice Dial or any other voice input?
It looks like a conventional headset, so if no other functions are implemented, it IS a headset, NOT a handsfree device.
Furthermore, until HTC or Microsoft release a new Bluetooth stack, looks like no new functions will be available. And it seems it will take forever!
Regards.
Dear All,
I'm pretty new to this forum and to the Wizard as well.
I'm using Navigon Navigator 5.2 on my T-Mobile Vario which works quite well. I do have one issue, well more an incovenience, while using the headset.
When Navigon is active and I accept a call with my bluetooth headset all system sounds, including Paula2 the nice navi lady, is muted. The phone call itself is diverted to the headset.
That make sense as I don't want to have Paula2 on my headset but I would like to have her on the speaker.
Is there any way to have phone calls served by the headset and system sounds, including program sounds, played on the speaker?
Any help is appreciated.
Cheers,
Thorsten
Greetings,
I'm using a Sony Ericsson HBH-DS970 stereo Bluetooth headset with my TyTN and so far I have only one gripe - when the headset is connected, the ring tone somes through the handset only, not the phone itself, which means that I'll miss any incoming calls if I don't have the earbuds inserted.
Also, the ring tone sometimes does not start until about 20 seconds after the display has started to announce the incoming call.
I tend to have the earbuds hanging from my neck if I'm not listening to music, and the ring tone is not loud enough to be heard that way.
I suspect this may be by design, because it's assumed that a stereo Bluetooth headset is always in/on the ears when connected to the phone, but I want to use the 970 as my only headset even when I'm not about to listen to music.
Is there any way to get a ring tone from both headset and phone?
/POL
?
Anyone figure this one out yet? I have the same problem...
same here, anyone find a solution please post, I think I can change it from the registry I will check it.
Can I ask you folks a question relating to the use of the headset Sony Ericsson HBH-DS970 with the HTC Hermes...do you get all the functionality ie caller ID, the ability to accept and reject the call, compatible with mediaplayer etc.
I have a concern that with the headset not being a HTC product, perhaps some of the Sony functionality may not work with the handset.
Thx
From my experience the ringtones will not come to the speaker if you use the headset as wireless stereo. I only use the headset as handsfree, which makes the ringtones go through the phone.
I used the DS970 for two week with my O2 Trion,feature like Caller Display is No any problem,But when using media player sometime it may out of control, like cann't accept call and control volume or stop.
And the sound quality is acceptable,but it will stop few second after 1 or minutes, I have change the regedit.
May I know is there any way to fix it?
Still no solution?
Anyone come up with a solution to this problem? It really bugs me not to get a ringtone from the unit itself, just thru headset... Works just fine with my old mono handsfree, would be great to have it in the stereo heaseat to...
i have the same problem
hello i have the same problem
the ring sound is only on my headset i have tested with 1.13.097fr and now 1.13.234fr if anybody have the ring on the phone with a headset stereo a2dp cang give us is configuration rom and other soft for the bluetooth.
thank and sorry for my english
juste a little frenchy
There seams as if there's no solution in sight, I got the exact same problem, also with HBH-DS970 and with Jetware Mobile's "Hands-free extension" installed.
I'm still running WM5, anyone who have tried WM6?
/Fluff
Same "design feature" here with my HBH-DS970 and HTC S710 WM6 Smartphone, so it's not ROM, device or OS version specific. I would suggest this is by design.
I'm pretty sure this is by design since thats how it works on my BT8010. Its stereo so it seems to make sense all sounds go through headset although it would be nice if it was an option. The BT8010 has a button on the headset to take it out of music mode so then they will go through the phone but I guess that doesn't help any of you out much.
Another option would be to just uncheck wireless stereo in the pairing and just check it back when you want to do wirelss stereo.
Hi all, I have MDA Pro with BT headset Motorola H500. When I have call, the headset just play its built-in ringtone. I have set different tones for some 'important' contact and want to listen to them on BT headset, is there any software or registry tweak can do it? I used MS Voice Command and it direct the ringtone to the BT headset, but using that program was a huge memory consuming and not useful for a non-native speaker like me. Any help would be appreciated.
PS: sorry for my bad English.
Your headset needs to support the handsfree profile not just the headset profile for this to work.
When I tap & hold on the headset icon, there are 'set as hands free' entry, click on it has no effect, anything i can do to activate handsfree? TIA.
Not unless your headset supports it. If it did, you would hear the ringtones.
I am looking at some specs of the headset, it do support both 'headset' and 'hands free' profiles. But I cannot hear the ringtone of MDA Pro just the default ringtone of the headset. Any ideas? Thx.
Hey everyone !!!
I Have a small issue with this Nokia BH-803 that i wanna use with my TP: The BH-803 functions on phone (calling,reciving a call,auto redial,mute etc...)but if i play a song on the TP the sound it's not present in the headset or if i recive a phone call the song that i have set as my ring tone rings on the TP but not in the BH-803 headset like it dose on Nokia phones (it rings in headset to but only a beep beep ring tone ) Thing is i want TP to be completly muted when is set on this Nokia Bluetooth headset and hear everything on it like it dose on nokia phones,i check up on bluetooth profiles and it seem to me that TP have all profiles that this headset supports ... !
-So,any ideea ? Any software to make it work to make it work like in full capacity ? Any point of view ?
I mention that i tested the headset on a Samsung phone to and it's the same as in TP ! Full capacity only on Nokia phones,Why ?
Interfaces: Bluetooth 2.0 with EDR; Hands-Free (HFP) Profile 1.5; Headset (HSP) Profile 1.1 this are the compability profiles from headset ~!
OK ! My problem is fixed wth this program: http://www.freewarepocketpc.net/ppc-download-bluetooth-audio-v1-0.html
nor really working on incoming and outgoing calls but it's Ok for music !! Over and out .