Hi dudes,
I hope that someone can help me:
I have a Touch HD (maybe its a bit overkill too tell this )
I hád a virgin phone a couple of hours ago
information from the first screen (with the boot sound e.d.):
Original RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.34_1.13.25.24_Ship
r 1.13.25.24
g 52.62.25.34u
d 1.56.00.00
And the SPL Screen:
Blac 32M
SPL-1.15.0000
MicroP-Blackstone (LED) v6
So what is the problem?
If i start the phone it "freeze" what means that you can only use the on/off button.
It freezes at the align screen.
I have multiple things allready tried:
1) Different SPL's
2) Different ROMS
3) Different Batteries
What should i do? (i'm almost sure that the hardware is working)
Kind Regards,
John
Hi John,
i noticed there from the output shown from your Bootloader screen it shows that you have spl version 1.15.0000. To upgrade to the ROM such as the one that you posted above, you need Hard-SPL 1.56 installed or 1.54.0000 USPL installed.
Regards.
EDIT: read this guide, it tells you how to upgrade to Hard-SPL 1.56 or USPL 1.54.0000. Once you upgrade to the required SPL, then you should have no problems flashing any of the latest custom ROMs.
the new output:
blac100 32mb
spl-1.56.Olinex
MicroP-Blackstone (LED) v6
And then??
It still freeze..
jay-connected said:
the new output:
blac100 32mb
spl-1.56.Olinex
MicroP-Blackstone (LED) v6
And then??
It still freeze..
Click to expand...
Click to collapse
And have you tried hard resetting the phone yes?
several times..
jay-connected said:
several times..
Click to expand...
Click to collapse
Okay mate. Then in that case, I would advise you to install a stock rom, then install hard spl if needed and you should be good to go. You can revert back to a custom ROM after you have installed the stock ROM.
With all my pleasure..
But.. then i need to change Radio and SPL versions.
I don't know which version was the original..
It is a dutch device with no brand or sim-lock
Can you help me with that?
jay-connected said:
With all my pleasure..
But.. then i need to change Radio and SPL versions.
I don't know which version was the original..
It is a dutch device with no brand or sim-lock
Can you help me with that?
Click to expand...
Click to collapse
Yes certainly, I shall try.
From your first post, it shows you were using radio version 1.13.25.24. Do you have the original RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.3. 4_1.13.25.24_Ship.exe file? If you deleted it then that's ok.
You can download a Stock ROM version for your phone from here, Try entering your phones S/N or IMEI number to see if your phone is eligible for an upgrade and then use that ROM and matching SPL. Once you have flashed back to the Stock ROM, the Radio is normally included and so you should now have radio 1.13.25.24 as depicted in the ROM name
Next, follow the rest of this guide (see bottom of post #1):
http://forum.xda-developers.com/showthread.php?t=431217
Let me know how you get on with that Jay.
Best regards.
Well..
I have reflashed the blackstone:
d: 1.13.25.24
g 25.62.25.34u
d.1.56.00.00
and bootmode
blac100 32mb
spl-1.56.olinex
microp-blackstone.
Now i'm gonna start with your link @ post #1
Hopefully i'm lucky
is it a problem tht i have also a 1.15 USPL?
And is it a goog idea to bring this thing also down to 1.13?
Because i have now the funny green screen..
and it stil "freeze"
You need to give a little more detail. I'm not sure what you have done and what it is that you are trying to do. If you are now using this rom - RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.3 . 4_1.13.25.24_Ship.exe, then you will need to use a 1.54.0000 spl I believe and that is why you have a green screen using spl 1.13.
When did this freeze first start happening? Did you try to flash your phone to the rom above, or was that the rom on your phone all along?
As Mastoid said, you need to read the Flashing guide and follow it step for step.
the first freezing start after my first try to flash the phone to a 6.5 custom ROM.
I will flash 1.54 back on the phone and tell you what happend
jay-connected said:
the first freezing start after my first try to flash the phone to a 6.5 custom ROM.
I will flash 1.54 back on the phone and tell you what happend
Click to expand...
Click to collapse
As this is related to rom flashing, please will you move this discussion to the Flashing Guide thread. I'll try to help you there.
i don't know for sure if this is 100% ROM related, but maybe it is a better idea to move this topic too that sub-forum.. Or maybe i can ask to the users there if they wan't to look at this topic..
My phone is still not responding to any key eccept the on/off button
Related
I need help. was updating my htc touch hd and suddently my phone turnd off. got 100% battery. anyway i truning my phone on and it was still on updating mode.....
den i try to update it once more and it worket. but when i turn my phone on it has green icons and my phones laaaags very much. any one that now ho to fix it
also when i tab the power to turn of the screen and turn it on my collors are coming bac......
and srry for my bad english
Help plz
I think you made miskate with HSPL or USPL see this excelent guide
http://forum.xda-developers.com/showthread.php?t=505377
60 prosent now hoping it will work
EyeBees said:
I think you made miskate with HSPL or USPL see this excelent guide
http://forum.xda-developers.com/showthread.php?t=505377
Click to expand...
Click to collapse
ït says that my versjon is
Blac100 32m
spl-1.12.01 olinex
microp-blackstone (led) v6
any one that now what i can do.
ho can i get it to my normal room
You never told what your flashed ROM is.
But your problem clearly implies newer ROM.
So your spl should have been "1.56.OliNex" and not "1.12.01 olinex".
Flash it to solve your problem. You can chose either USPL or HSPL depending on your taste. USPL suggested as it is easier to get back to stock ROM should need returning device to HTC for warranty, especially seeing your sig
Hi,
I have searched the platform, but none of the questions seem to covermy problem. I do apologize in advance if I just did not see it and it is still there .
Here is my problem:
I have updated my HTC Touch HD to WM6.5 (eps65v2). After that my reception started to really suck. I reinstalled back to BlackStone_HTC_GER_1.14.407.3_Radio_52.49a.25.26_1.09.25.14_Ship (which was working fine before the update, and it even shows me Radio Rom 1.09) Still my reception is really bad. I hardly can make calls in closed rooms, GPRS/Edge is not available most of the time. It is not really related to the location. Sometimes I don't have ANY reception where I had good signal 5 minutes before...
Please help, since I don't want to throw my Blackstone out.
Here is my current config (Updated back to 6.5):
ROM: 1.14.EPS GER
Radio: 1.14.25.24
Protocoll: 52.64.25.34U
Thank you all very much in advance
the symptoms you list suggest your device has the wrong SPL for WM 6.5. did you read how-to and then prepare your device before flashing a WM 6.5 ROM? does your bootloader look like this Pic of Bootloader with HardSPL (ignore the Serial at the bottom)? (you get to bootloader mode by powering off the phone, then press-and-hold the down volume button and quickly tap your power button (do not press and hold the power button) if your bootloader does not appear like the one in the picture, then your phone hasn't been properly prepared .... goto the Dummies Flashing Guide and follow the steps to prep for your phone. if you have problems post your questions in the dummies thread and you'll get help much faster than opening a new thread. if you've completed all these steps, what does your bootloader say?
SPL Version wrong
Hi,
Thank you very much for replying so fast!
I checked, and you where right, it shows only SPL 1.14
I will work through the dummies guide and let you know the results.
Again thanks for your support...
no problem...
Updated SPL, but same issues
Hi,
I have now updated the SPL as described,and my tri-color screen looks exactly like the one above. I have also updated to a new WWE ROM, because the colors of mine were totally off.
This is my new configuration now:
OS: 5.2.23.45
ROM: 1.59.841.58 WWE
Radio: 1.14.25.24
Protocol: 52.64-25.34W
Still I experience really bad connection. I have turned 3g off, since it doesn't work with AT&T anyway...
Any ideas?
Thank you very much in advance...
e9326732 said:
Hi,
I have now updated the SPL as described,and my tri-color screen looks exactly like the one above. I have also updated to a new WWE ROM, because the colors of mine were totally off.
This is my new configuration now:
OS: 5.2.23.45
ROM: 1.59.841.58 WWE
Radio: 1.14.25.24
Protocol: 52.64-25.34W
Still I experience really bad connection. I have turned 3g off, since it doesn't work with AT&T anyway...
Any ideas?
Thank you very much in advance...
Click to expand...
Click to collapse
if your colors are off there's still something wrong. did you get that corrected? post your bootloader details here. does your bootloader say SPL 1.56 OliNex? also did you use HardSPL or USPL?
e9326732 said:
OS: 5.2.23.45
ROM: 1.59.841.58 WWE
Radio: 1.14.25.24
Protocol: 52.64-25.34W
Click to expand...
Click to collapse
These aren't the details you need to post. Go into bootloader by:
1. Turning off device
2. Holding down volume down and then pressing power on. (Continue to hold volume down)
3. You should be presented with a tri-colour screen, this is bootloader.
We require your SPL, if your using HSPL it should state SPL 1.56.Olinex, if USPL, it should state 1.54.USPL before flashing rom
Hi,
The Bootloader screen shows:
BLAC100 32M
SPL-1.56.OliNex
MicroP-BlackStone (LED) v6
The colors were messed up before I upgraded to 1.59
Does that help?
Thank you!
e9326732 said:
Hi,
The Bootloader screen shows:
BLAC100 32M
SPL-1.56.OliNex
MicroP-BlackStone (LED) v6
The colors were messed up before I upgraded to 1.59
Does that help?
Thank you!
Click to expand...
Click to collapse
HSPL 1.14 is to be used for roms based pre/before 1.56
HSPL 1.56 is to be used for roms based on 1.56+
Yes, that'swhat I had. HSPL1.56 and ROM1.59
Now I seem to have bricked the thing completely.
I have tried to step back to what I had before, and flashed the Stock SPL 1.13
Now I cannot Flash anymore. Not even the new SPL.
Is therea tool to get that SPL back to a unsigned version?
Thank you..
e9326732 said:
Yes, that'swhat I had. HSPL1.56 and ROM1.59
Now I seem to have bricked the thing completely.
I have tried to step back to what I had before, and flashed the Stock SPL 1.13
Now I cannot Flash anymore. Not even the new SPL.
Is therea tool to get that SPL back to a unsigned version?
Thank you..
Click to expand...
Click to collapse
you never mention the model number of your device. do you have the Touch HD T8282 (UK model that doesn't have the US 3G) or the Touch HD T8285 (Telstra model with the 850 US 3G band)? also, the stock SPL for the UK model is SPL 1.14 and the Telstra model is 1.15. never heard that there was a SPL 1.13.
i suggest slowing down with all these changes; i sense you're frustrated and trying different things without a little planning ahead of time (feel free to correct me if i'm off base here). at this point, you should consider posting your help requests in the HardSPL 1.56 thread. i suggest you start by posting your bootloader settings so we know your starting point. if you don't get an immediate response, be patient. those that can help will respond with suggestions.
Would agree with cortez.i, take a step back, don't panic and try to relax. If you can still get into bootloader your phone is not bricked and should be easily recovered.
Post your future posts in HSPL thread and we'll help you together to sort out your issue
Ta
Rick
Hello all,
I recently purchased HD2, the first thing I did was going to HTC website and downloaded the latest ROM Version: 1.66.415.3, now my SPL version is 1.66000 XE. I searched the forum before posting this thread, but I did not find a clear post that answers my questions, and I am still a newbie in modding field, so please bare with me.
This ROM includes Arabic language support which I need, but its quite bugged, in away that most of the menus are in Arabic now, and even though I chose from the settings to have them in English, even disabling multi-language support wouldn't change the menus to English and they still are in Arabic.
More over some bugs, like the Arabic supported Keyboard will always play a very high click sounds, even if I reduce the volume, put it on Silent or Vibration, everything will be silent except for the Arabic Keyboard would still play the clicks.
So i thought there must be a fix for it, and the best possible way to do it in my opinion is Via installing HSPL, now the problem is I can no where find how I am able to Roll back to SPL 1.42 so that I can install HSPL, since i have SPL 1.66, So my question is, Does anyone know how and where can I roll back to SPL 1.42 so that I can install HSPL ?
My second question, Is there any Custom Rom that have full Arabic support meaning I can type and read Arabic Websites/Messeging/Email/MMS and such ? I saw Seatone's ROM that indicates Arabic Support, but I cant find anywhere to what extent it is ?
My third question is after rolling back to SPL 1.42 from SPL 1.66 and installing HSPL (assuming that this process is possible), Can I update to Newer SPL and still have HSPL installed ? or I would have to remove the HSPL in order to update my SPL ?
My last question is regarding RADIOS, can I install multiple RADIOS or I can only have one installed at a time ? Also for Backing up my ROM on my device (assuming I dont have the software on the PC), how do I do it ?
Eventually thanks for your time and consideration to help me in this matter, looking forward to hear some answers !!
All the official roms can be download here.
http://rapidshare.com/users/258XUJ
once download, I think you can just follow the procedures for removing HSPL to put it back to a standard factory state.
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
BAZ007 said:
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
Click to expand...
Click to collapse
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
fyase said:
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Click to expand...
Click to collapse
Oh thanks alot, explains much, Do you have any idea about my other questions ?
Is there any Custom Rom that have full Arabic support meaning I can type and read Arabic Websites/Messeging/Email/MMS and such ? I saw Seatone's ROM that indicates Arabic Support, but I cant find anywhere to what extent it is ?
After rolling back to SPL 1.42 from SPL 1.66 and installing HSPL (assuming that this process is possible), Can I update to Newer SPL and still have HSPL installed ? or I would have to remove the HSPL in order to update my SPL ?
My last question is regarding RADIOS, can I install multiple RADIOS or I can only have one installed at a time ? Also for Backing up my ROM on my device (assuming I dont have the software on the PC), how do I do it ?
Thanks alot in advance ...
BAZ007 said:
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
Click to expand...
Click to collapse
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Help
Good Night.
I have a HTC HD2 with the 1.66.0000 XE SPL, and with the following ROM "RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship"
Because i update the ROM from the HTC Website, and it gave me that ROM, after i update it i notice that it is in NLD (Nederland), now i want to install other ROM and i Can't.
I want to do HSPL but to do that i need the SPL-1.42.000, to have that SPL i have tried to install other ROMS, but it had failed all the times with the following Error ("ERROR [294] : INVALID VENDOR ID ").
Need some help with this, because e don't understand NLD (LOL), and i want to install a PTG ROM.
.
Can anyone give me a hand? I have Telstra HD2 using on ATT in the U.S. and flashed to this ROM
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
When I check the bootloader it says
SPL-1.42.HSPL
However when I try to HSPL it says.
You must have SPL 1.42.0000 and errors out. I read that if I flash any shipped OEM ROM it'll put it back to 1.42.0000 but it doesn't appear to be doing that.
Any help would be appreciated I'm trying to get any HSPL on this thing. I've also tried HSPL2 to no avail. It said bad ID or something.
Thank you in advance.
juiceppc said:
Can anyone give me a hand? I have Telstra HD2 using on ATT in the U.S. and flashed to this ROM
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
When I check the bootloader it says
SPL-1.42.HSPL
However when I try to HSPL it says.
You must have SPL 1.42.0000 and errors out. I read that if I flash any shipped OEM ROM it'll put it back to 1.42.0000 but it doesn't appear to be doing that.
Click to expand...
Click to collapse
1.42.hspl means hspl is installed, it MUST have been installed for you to flash that wwe rom.
flash what you want using usb and job done.you are seeing a problem that doesn't exist
Any help would be appreciated I'm trying to get any HSPL on this thing. I've also tried HSPL2 to no avail. It said bad ID or something.
Thank you in advance.
Click to expand...
Click to collapse
hspl2 doesnt work on telstra.
samsamuel said:
1.42.hspl means hspl is installed, it MUST have been installed for you to flash that wwe rom.
flash what you want using usb and job done.you are seeing a problem that doesn't exist
hspl2 doesnt work on telstra.
Click to expand...
Click to collapse
Thank you! I didn't even think to try. It worked. GTX right now!
fyase said:
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Click to expand...
Click to collapse
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Valenzuela said:
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Click to expand...
Click to collapse
You will want the WWE (World Wide English) Rom, it is there on that rapidshare link that was posted earlier .....
Valenzuela said:
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Click to expand...
Click to collapse
watcher64 said:
You will want the WWE (World Wide English) Rom, it is there on that rapidshare link that was posted earlier .....
Click to expand...
Click to collapse
STOP
when you say "us hd2" do you mean a tmous? t mobile us? because if yes, then those roms will kill your phone.
ONLY flash tmobile roms or tmous compatible cooked roms to a tmous.
hey.i really need help with this im New A THIS ...I JUST WNT TO FLASH MY HD2 BACK TO SPL 1.42.0000 .TO FLASH DROID ON IT..CAN SOMEONE PLZ HELP ME..JUST TELL ME WAT TO DOWNLOAD IN WERE TO GET EVERY THING ELSE THANK YOU...
Flashing from 2.10.000 to 1.43
Trying to flash a TMO HTC HD2 and I keep getting an update error 262.
ERROR [262, 276, 284, 302] : UPDATE ERROR
I have tried doing the soft reset 5 times now and I keep getting the same error. Am I doing something wrong that I am not seeing?
konspiracy said:
Trying to flash a TMO HTC HD2 and I keep getting an update error 262.
ERROR [262, 276, 284, 302] : UPDATE ERROR
I have tried doing the soft reset 5 times now and I keep getting the same error. Am I doing something wrong that I am not seeing?
Click to expand...
Click to collapse
There are NO 1.43 roms that will work on your tmous, you WILL permanently destroy it if you do manage to flash one. The tmous will ONLY take roms version 2.x or higher
you are very lucky that you dont have hspl installed, else it would let you flash, and your phone would be dead.
So what do we do if we have tmous and want to install HSPL?
orange_penguin said:
So what do we do if we have tmous and want to install HSPL?
Click to expand...
Click to collapse
use hspl3.
RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed_15.33.50 .07U_2.07.50.27_2_Test
OK I DID I RIGHT NOW...
Have branded Vodafone UK
Can't even flash back to Vodafone UK stock rom...
can't go back to HardSPL...
release was good...
phone doesnt work anymore...
flashed from sdcard.... after testing it...
i have just forgotten about hspl... and my branding...
after flashing... from sd
-> beppe hspl deleted -> PHONE BRANDED -> Not bootable NOT WORKING!
upgrade ROM code error
please try again
please... someone help me... hmm develop new HSPL [/QUOTE]
OK SOLVED BUT REMEMBER:
Flashed to RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed_15.33.50 .07U_2.07.50.27_2_Test THERE IS NO WAY BACK!!! you will have to stay with this rom until hspl 2 comes out!!!
IF YOU HAVE BAD LUCK, LIKE I DID, YOU WONT BE ABLE TO FLASH !ANY! OTHER ROM... NOT FROM SD CARD, GOLDCARD, USB, SSPL!
Click to expand...
Click to collapse
Yes i tried it with my goldcard... nada... otherwise i wouldn#t open this thread...
Custom RUUs... mtty... .exe usb... .nbh sdcard... everything
Same problem here bro!
Mine did work, but I accedently opeend the exe from 1.66 test rom and got this problem.
No I'm hoping that flashing 1.66 NLD will give me my phone back.
Otherwise MTTY
Fard succesfully flashed rom + custom rom using SPL 2.07
Edit:
1.66 NLD didn't work aswell
0028002 NOT Allowed it is saying to me.
xmoo said:
Same problem here bro!
Mine did work, but I accedently opeend the exe from 1.66 test rom and got this problem.
No I'm hoping that flashing 1.66 NLD will give me my phone back.
Otherwise MTTY
Fard succesfully flashed rom + custom rom using SPL 2.07
Edit:
1.66 NLD didn't work aswell
Click to expand...
Click to collapse
damn...
can#t sleep... need a beer...
a coldcard... maybe mine isnt gold anymore
Is there any way to make a goldcard without a hd2???
I already have the goldcard.img for my sd... my brother is sending his... maybe it will work...
ctman said:
damn...
can#t sleep... need a beer...
a coldcard... maybe mine isnt gold anymore
Is there any way to make a goldcard without a hd2???
I already have the goldcard.img for my sd... my brother is sending his... maybe it will work...
Click to expand...
Click to collapse
nope goldcard is serial related. I tried 3 of mine goldcards, still the same issue....
Gonna try wwe 1.66, The spl 2.07 vendor locks you, but now you have to find the correct rom tht get's accepted
flashing with sspl?
HD2Owner said:
flashing with sspl?
Click to expand...
Click to collapse
The thing is the screen shows the Trianlge.
And in Bootloader it says you need to upgrade rom.
But when you try to update it reboots at 1% giving diffrent errors.
xmoo said:
nope goldcard is serial related. I tried 3 of mine goldcards, still the same issue....
Gonna try wwe 1.66, The spl 2.07 vendor locks you, but now you have to find the correct rom tht get's accepted
Click to expand...
Click to collapse
had this problem yesterday, too... something went wrong flashing...
only through htc hotline i have found out: my phone is vodafone uk branded... and i didn't check my goldcard... maybe i deleted gold status some time ago...
THERE MUST BE A WAY TO MAKE A GOLDCARD WITHOUT THE HD2!
can you install a official 1.66-rom with sdcard-method and apply hardspl afterwards?
i guess the problem is: there is no 1.42-spl-rom for the TMOUS-CID......
HX-BC
SPL-2.07.000 8G XE
MicroP-Wrong Platform(0x1)
MicroP(Touch) 0x30
Bootloader status.
1.66 WWE didn't work... So I think MTTY is only option?
why didn't you just re-cook the 2.07-rom and use it with Hardspl???
new 2.07spl not needed. everything works with 1.42hspl.......
HD2Owner said:
why didn't you just re-cook the 2.07-rom and use it with Hardspl???
new 2.07spl not needed. everything works with 1.42hspl.......
Click to expand...
Click to collapse
SPL 2.0 gave me good battery life in 2.02, so that's why I wanted to upgrade SPL aswell.
Something went wrong during flash.
Cause fard even custom flashed spl 2.07, but he's sleeping now.....
hope we'll see a 2.0XHSPL soon....
Dont know if i can ever save my phone....
to HSPL you need a working... booting phone with 1.4 spl
MY hone is branded, too... and vodafone uk stopped hd2 sales and development... still 1.43 latest rom...
any suggestions? tried 20 roms... .exe / extracted via custom ruu-sspl .... and i tried the mtty... ... nothing
cant even flash back to my original branded rom...
any way making a goldcard with damaged HD2?!??
ctman said:
Dont know if i can ever save my phone....
to HSPL you need a working... booting phone with 1.4 spl
MY hone is branded, too... and vodafone uk stopped hd2 sales and development... still 1.43 latest rom...
any suggestions? tried 20 roms... .exe / extracted via custom ruu-sspl ....
any way making a goldcard with damaged HD2?!??
Click to expand...
Click to collapse
Fards know how to make a goldcard, but you have to wait a day.
If you don't have time for waiting use mtty....
One more thing to try is to flash TMOUS 2.01 or 2.02 and see if they can be flashed!!!!!
If they can beflashed, and i remember correct, they can be overwritten with the old hardspl afterwards.
Good luck!
smaberg said:
One more thing to try is to flash TMOUS 2.01 or 2.02 and see if they can be flashed!!!!!
If they can beflashed, and i remember correct, they can be overwritten with the old hardspl afterwards.
Good luck!
Click to expand...
Click to collapse
Already tried, but no succes.
I've been stuck with SPL-2.0 for a while now myself. Nothing gets it off including multiple goldcard attempts and full flashing of stock roms. It seems like it's there to stay, at least until we get a HSPL2.0 which I'm waiting for.
My radio version is stuck where it is but I can upgrade firmwares using SSPL which is nice. I just flashed Miri's latest 2.05 and everything works fine. Still, I hate having my SPL locked down like this.
balane said:
I've been stuck with SPL-2.0 for a while now myself. Nothing gets it off including multiple goldcard attempts and full flashing of stock roms. It seems like it's there to stay, at least until we get a HSPL2.0 which I'm waiting for.
My radio version is stuck where it is but I can upgrade firmwares using SSPL which is nice. I just flashed Miri's latest 2.05 and everything works fine. Still, I hate having my SPL locked down like this.
Click to expand...
Click to collapse
I had no problems flashing diffrent roms and spl's.
Was on 1.43, 1.48, 1.66, 2.00, but now i'm stuck @ 2.07
pb81120
spl-2.00.1000 xe
heres what i have done so far. i task29 the device tried to flash radio to 2.15. i found that my spl had to be either updated or downgraded and i have tried to upgrade it and it sits at the htc scree at 0%. i also have tried flashing an official rom which will not take either. any help would be much appreciated thanx in advance
oops, that's a manufacturing test spl, and cant easily be changed.
In a nutshell, flash a rom with spl 2.02 ( go see the "tmous test and stock roms" thread, second in the list do NOT NOT NOT flash the first rom in the list if you have a tmous) and then find the version of hspl that has been edited to work with spl 2.02, use that to set spl 2.08 and then you should be good to go.
Dont just dive in, read THIS and THIS and if you decide you need a goldcard then send me your sd cards unique serial and an email address.
could you link me to the tmous test and stock roms? or tell me what section its under please and do you have yahoo or meebo skype anything? i need help baaaaad its a customers fone and was supposed to be done tonight would appreciate alot if you could help me get this done
its in the winmo tmobile section. If the phoen isnt a tmous, then you will possibly need a goldcard since those roms are tmous roms.
I cant help you step by step, its 3am and im away shortly, good luck tho, and don't be rash, thats how mistakes get made.
2.03?
all those rom links are down do you know where i could get a 2.03 rom from? seem that was what worked for one of our members.