Hi folks,
I was trying to change the Favourites icons on the HD2, having found them in the Windows > Thumbnails folder, and managed to delete both of the registry keys in doing so. I thought they would reappear if I removed and replaced the Favourites, but they haven't, and now I am left with no website icon at all, just the grey 'internet' icon. I have set other Favourites to different buttons, and these work fine, the registry keys having appeared. How can I fix the problem with the first two icons?
Thanks for any help.
Simon.
Anyone?
Si6776 said:
Anyone?
Click to expand...
Click to collapse
no idea gl
you can re-add the registry keys you deleted, no?
lancelot54 said:
you can re-add the registry keys you deleted, no?
Click to expand...
Click to collapse
No, it was one of those {xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx} type keys, and I have no idea what the letters and numbers were now. I'm just annoyed with myself for not taking a backup first. It was the old "It'll be alright" syndrome.
Make a backup of your phone (e.g. with SPB Backup), then Hard-reset, then restore backup.
Thanks. I was hoping to avoid that, but I think I'll have to.
Have you only tried setting them as what they were before, or have you tried setting them to different favourites?
I had a similar problem and got round it by modifiying the URL in a way that would not change the location, but make the UI think it was different, and therefore reloaded the icons.
Yes, I've tried with different URLs, and they work. The problem definitely seems to be with the URL. If I use that same URL in any of the other button links, they too won't display the thumbnail, but will for any other URL, and any other URL also works in the two buttons I've 'broken'. Seems I need some way to make it completely forget those two URLs, so that I can start again. Deleting them from Favourites doesn't do it, as the same thing happens again when I redo them.
Si6776 said:
Yes, I've tried with different URLs, and they work. The problem definitely seems to be with the URL. If I use that same URL in any of the other button links, they too won't display the thumbnail, but will for any other URL, and any other URL also works in the two buttons I've 'broken'. Seems I need some way to make it completely forget those two URLs, so that I can start again. Deleting them from Favourites doesn't do it, as the same thing happens again when I redo them.
Click to expand...
Click to collapse
Then try this trick - it's how I fixed the exact problem.
Remove the problem favourites from the internet tab.
Open either Opera or IE so you can edit your favourites.
Modify the URL of the problematic favourites by adding ?a=1 (If the URL already has a ? and then some other stuff, put &a=1 instead).
You should now be able to add the favourites back to the internet tab, and after a visit to them in Opera they should have refreshed (fingers x'ed!)
Let us know how you get on
johncmolyneux said:
Then try this trick - it's how I fixed the exact problem.
Remove the problem favourites from the internet tab.
Open either Opera or IE so you can edit your favourites.
Modify the URL of the problematic favourites by adding ?a=1 (If the URL already has a ? and then some other stuff, put &a=1 instead).
You should now be able to add the favourites back to the internet tab, and after a visit to them in Opera they should have refreshed (fingers x'ed!)
Let us know how you get on
Click to expand...
Click to collapse
OK, well, that works, until I remove the '?a=1' and go back to the original URL. If I don't do that, the browser ignored the ';wap2' suffix, and opens up the full site, which I don't want, as it's a forum, and it's 100 times easier to use the 'wap' interface. If I add ';wap2' after the '?a=1', then it does open the wap interface, but takes me to the index page, rather than Unread Posts, which is what the bookmark is for.
I know I'm being a bit fussy and anal, but these two forums are the ones I Admin on, so I use the bookmark links all the time, and it's going to be annoying if they don't work the way I want them to.
Thanks for the suggestion, though, and if you can think of a way to get it to work, I'd be more than grateful. I won't post the full link, so as not to spam, but the URLs are both the same, and are variants of:
http://www.[myforum].com/smf/index.php?action=unread;wap2
Related
Don't you hate it when you let someone play with your shiny new WM phone
they usually go right to your SMS inbox?
jonesj8 had the same irritation, so inspired by him I threw something together
Original thread :
http://forum.xda-developers.com/showthread.php?t=375057
I created a new thread to have a bit more overview, and also to get it under the attention of other users who might be interested
@mods
I can understand if you close this thread...
How does it work.
this version requires you to change all the .lnk files pointing to tmail.exe, or to the dll...maybe even other ones...
I say all lnk's but the most important are the ones the "friend" is going see/use.
I've included a shortcut creator in the attachment.
In FileList.ini specify the application to block,
in the included file it's \WIndows\tmail.exe
and i've used msg as argument.
so in the .lnk would point to lockdown.exe with the argument msg
if the passcode is correct the file will be opened.
it's not very quick (since it needs to be opened) but this should change in the next version.
the passcode can be changed in the settings.ini, default is 12345
Let me know what you think or if you have any ideas
Update Version 0.4
Well I finally got around to an update, which is attached below
The application has been rebuild from the ground up, I've used a Lock and Key method, e.g. the lnk uses key.exe which communicates with the server (the lock) this way the server only needs to read the filelist once which should save time.
<note>
because of this you will need to enter the items in the FileList.ini prior to starting the server, when the server is running it will create the used shortcuts for you
which you can then place.
if you add stuff while it is running the shortcuts wont be created...
pointers on making the FileList.ini is in the readme below.
New in this version
- installer (cab)
- app to date support
- redesigned layout
- support for arguments, opening the sms should work now, it does for me
- locking of other files should work now too (thesed with a html file)
- automatically create the proper lnk files in sub folder
To do
- include support for different screen sizes
- way to customize the colors
- mask input with *
- skinning...?
In case someone is bored and wants to create the graphics, be my guest,
My creativity in that department is next to null
Sounds great. Any chance of a screenshot of the lock screen?
Mr_Gee said:
Click to expand...
Click to collapse
Thanks, trying it now
works good, cant seem to get arguments passed to tmail.exe in settings.ini
ie.
msg=\Windows\tmail.exe -service "SMS"
just opens account picker, is on todo list? not bugging you, good app,
thx!
great will it run on VGA? make it as simple as you can so when we are in hurry the soft won't load so long
This looks nice and configurable.
Are we able to make it request the pin for any application listed in FileList? First try didn't work, I want to restrict more than just the inbox
sorry, double post
badaas said:
works good, cant seem to get arguments passed to tmail.exe in settings.ini
ie.
msg=\Windows\tmail.exe -service "SMS"
just opens account picker, is on todo list? not bugging you, good app,
thx!
Click to expand...
Click to collapse
Correct that isn't working... also i'm not sure if it will be in there,
the reason is I wanted to change the app so it looks at the window name,
this would close all message related windows, and there is no need to change the .lnk files
theme freak said:
great will it run on VGA? make it as simple as you can so when we are in hurry the soft won't load so long
Click to expand...
Click to collapse
Not yet, but is planned for future versions, I'll add it to the todo list.
evojulz said:
This looks nice and configurable.
Are we able to make it request the pin for any application listed in FileList? First try didn't work, I want to restrict more than just the inbox
Click to expand...
Click to collapse
Currently any application can be restricted by providing a ID + location, e.g
xyz=\Program Files\TCPMP\player.exe
changing the link to tcpmp would have lockdown popup first
What application would you like to restrict?
Mr_Gee said:
Correct that isn't working... also i'm not sure if it will be in there,
the reason is I wanted to change the app so it looks at the window name,
this would close all message related windows, and there is no need to change the .lnk files
Click to expand...
Click to collapse
hmmm, not sure i know what you mean. But basically, as it is now, I can't go direct to the inbox of sms using your lockdown? \o?
thanks
badaas said:
hmmm, not sure i know what you mean. But basically, as it is now, I can't go direct to the inbox of sms using your lockdown? \o?
thanks
Click to expand...
Click to collapse
Basically, no
but as a workaround you could try making an lnk to tmail.exe with the -service etc. in there, next change the FileList.ini pointing to that new lnk...
not sure if it will work though
Mr_Gee said:
Basically, no
but as a workaround you could try making an lnk to tmail.exe with the -service etc. in there, next change the FileList.ini pointing to that new lnk...
not sure if it will work though
Click to expand...
Click to collapse
bLEhg! lol, ok, will look into that (scratches head )
some novelty things to add: skins, mask input with '*', maybe use symbols instead of numbers, 'jumble' keypad/symbols random for added security (if using symbols )
thanks for infos and keep up the good work
badaas said:
bLEhg! lol, ok, will look into that (scratches head )
some novelty things to add: skins, mask input with '*', maybe use symbols instead of numbers, 'jumble' keypad/symbols random for added security (if using symbols )
thanks for infos and keep up the good work
Click to expand...
Click to collapse
Let me know if it worked, I'll look into the symbols
Skinning was already on my list great minds ....
input mask is also a good one
Any chance you can re-scale the images to fit a 240x240 screen res?
Can test it you want.
Cheers, Mike.
Mike1002 said:
Any chance you can re-scale the images to fit a 240x240 screen res?
Can test it you want.
Cheers, Mike.
Click to expand...
Click to collapse
I'll give it a shot
@ the rest
there are 4 basic resolutions right?
320 X 240
320 X 320
240 X 240
640 X 480
the rest is pretty exotic (Omni & X1)
is this possible on htm files?
Hi Mr_Gee, thanks for sharing
I have an couple of offline files I would also like to lockdown. Is it possible to lockdown those htm files as well? tia.
adomila said:
Hi Mr_Gee, thanks for sharing
I have an couple of offline files I would also like to lockdown. Is it possible to lockdown those htm files as well? tia.
Click to expand...
Click to collapse
probably...
have you tried entering them in the FileList.ini file?
currently not working on html files
Mr_Gee said:
probably...
have you tried entering them in the FileList.ini file?
Click to expand...
Click to collapse
now, that you mention it yes, i have tried it and it does not work, if it is the specific html file. the lockdown screen would still appear but nothing happens after entering the code. maybe it will work, if the iexplore.exe itself is lockdown but this will lock down every/all html files. would it be a big change to code it, just for specific html files? i'm also thinking on specific text files just like the said html files. i keep notes on pure text files like tax account number, passwords, pincodes, etc in a text or word file. maybe this is pushing too far. maybe in the next version/release? hehehe thank you for sharing and more power...
Sorry I was on holidays
I've tested with PIE.exe and i plan this for the next version.
Please note though that this tool is only for making sure "friends" don't read your personal stuff very easy, but passwords/pin codes might be a bit too high risk..
I think this should be further developed! It really should come standard on winmob... hey Gee, if you need a cab builder or photoshop, I'd be happy to help! Let's make this idea the next ROM must-have!
I wanna use this program because every time someone wants to see my phone, they get to snooping into my personal info. However, I'm afriad if I start changing things manually, I'll screw my phone up.
just put this reg tweaj in regm and multusekect is ebabled adter sift reset. (exept inbox outlook).
And what exactly enables that?
smaberg said:
just put this reg tweaj in regm and multusekect is ebabled adter sift reset. (exept inbox outlook).
Click to expand...
Click to collapse
I bet you are thumb-typing this on your X1 ?
SomeoneSimple said:
I bet you are thumb-typing this on your X1 ?
Click to expand...
Click to collapse
Or he's still drunk from last night
But what does it do? By asking google i get that multiselect is, that i can press the stylus, move it and seclect multiple items. But this is allready working. Even in outlook. And i dont have that registry key at all. So whats the point?
nurps said:
But what does it do? By asking google i get that multiselect is, that i can press the stylus, move it and seclect multiple items. But this is allready working. Even in outlook. And i dont have that registry key at all. So whats the point?
Click to expand...
Click to collapse
exactly that! in most cooked newer roms, multiselecting don't exist.(thx microsoft).
still, dr..k, and thumbtyping on microsoft soft keyboard!
smaberg said:
just put this reg tweaj in regm and multusekect is ebabled adter sift reset. (exept inbox outlook).
Click to expand...
Click to collapse
Ermmm..what does 'regm' mean and where would I find it in my x1 files?
HOW to multiselect Pictures then???
Okay, if this is already there, kindly somone explain HOW I can multiselect some pictures i.e. to beam at once?
Cannot find a way, only one by one so far.
I use resco file explorer which enables me to select many files at once to beam it to another phone.
michaelthemage said:
Okay, if this is already there, kindly somone explain HOW I can multiselect some pictures i.e. to beam at once?
Cannot find a way, only one by one so far.
Click to expand...
Click to collapse
well this is like holding the left mousebutton i windows and dragging the mouse to select several files at once, so in x1 and other it will work in total commander and other apps like it by simply drag stylus over several files to select them.
Oops accidental double post!
And that's all just a registry setting? How rare. Nice though, thanks!
michaelthemage said:
Okay, if this is already there, kindly somone explain HOW I can multiselect some pictures i.e. to beam at once?
Cannot find a way, only one by one so far.
Click to expand...
Click to collapse
The answer to this lies in understanding bluetooth. Natively Bluetooth beam supports single file transfer. I.E. you have to send them one at a time, even folders containing multiple files cannot be beamed. This is where a third party application is required, which can automatically send multiple files 1 by 1 when you select more than one. I use Resco Explorer, out of the box it allows you to select multiple files with a drag of the stylus and perform any regular operation on them all even transfer across wifi/bluetooth. hope this helps
Don't think this has anything to do with 'understanding' either Bluetooth nor 'how its beamed'. My P990i could do this just fine with bluetooth or infrared!
And when you "try" to select more pics, the phone does not know yet what you want to do with that.... sending via Bluetooth, email, mms, etc. So that has nothing to do with this. Its a Windows craps perhaps?!?!
bharat4ever
Okay, thanks.
Will try a third party app now (once again...)
In the meantime I found to use the Virtual Keyboard, hold down Ctrl button and then can select any number of files. Most of the time it works to mutli send / beam the files/pics.
Or, one can use Resco Explorer to do the same.
Regards
Can't find an answer to this using search so forgive me if i missed it.
Pretty much as the title states, i was intrigued with the prospect of skyfire so i gave it a go, doing so pushes internet explorer to the default browser (hateful program!!).
I just need to get opera as the default browser again.
Any help grateful.
in operas setting there is one which makes it set as default browser, (but i cant see it on mine??? ,might be cos i upgraded to the flash version on here????)
open opera, go to settings have a look around, i couldnt see it either....
although you can try this...
:extra:
go to opera and then go to this page opera:config
you will find alot of extra settings here to change things about
there must be a registry setting for which is default browser might be as simple as what open ".html" files
Use a registry edit
I have had to do this a couple of times now through playing with alternative broswers. I read elsewhere that if you type opera:config into the address bar in opera, you can bring up all the preferences. Apparently checking 'Browser First Time Launch' in the 'Install' section is supposed to reinstate Opera as the default browser, but it didn't work for me.
I have found the easiest way is simply to use a reg fix by using a registry editor (I have been using EveryWan which also allows you to remote control your Touch HD as well as many other useful tools: http://www.sparus-software.com/Device-Management/Products/EveryWAN-Remote-Support,43/THE-ULTIMATE-TOOL-FOR-HOTLINERS.html).
Edit the registry as follows:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\: DEFBROWSER
"0"=Opera Browser
"1"="\Windows\OperaL.exe\"
After this everything should be hunkydory
Regards,
Guy
Will give this ago, maybe this should go wiki? if it's not already.
The possibiltys that skyfire/other new browsers may tempt to install but lose the default functionality of opera, which in my mind is superb on the HD.
Thanks Chaps
Hey. thanks for all the suggestions. I did change the registry values, according to the instructions above, I did tick the install option in Opera config, and still I get IE opening when I click on a link in RSS Feed. Anyone has another idea?
Thanks!
tudork said:
Hey. thanks for all the suggestions. I did change the registry values, according to the instructions above, I did tick the install option in Opera config, and still I get IE opening when I click on a link in RSS Feed. Anyone has another idea?
Thanks!
Click to expand...
Click to collapse
This is relevant to my interests. I really dislike IE opening my rss feeds as well.
I also have this problem.
It happened after installing and unistalling skyfire.
Every time I click in a link (for example in the email) it opens in the IE.
Gisbourne said:
I have had to do this a couple of times now through playing with alternative broswers. I read elsewhere that if you type opera:config into the address bar in opera, you can bring up all the preferences. Apparently checking 'Browser First Time Launch' in the 'Install' section is supposed to reinstate Opera as the default browser, but it didn't work for me.
I have found the easiest way is simply to use a reg fix by using a registry editor (I have been using EveryWan which also allows you to remote control your Touch HD as well as many other useful tools: http://www.sparus-software.com/Device-Management/Products/EveryWAN-Remote-Support,43/THE-ULTIMATE-TOOL-FOR-HOTLINERS.html).
Edit the registry as follows:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\: DEFBROWSER
"0"=Opera Browser
"1"="\Windows\OperaL.exe\"
After this everything should be hunkydory
Regards,
Guy
Click to expand...
Click to collapse
That worked for me.
Thanks
Arghhhhhh!
PRAP said:
That worked for me.
Thanks
Click to expand...
Click to collapse
Right Peoples,
I'm having a right nightmare! Have trie both suggestion and followed to the letter. the only defference is that i'm using regedit opposed to guy's link.
Nothing is working. opera is default bet the browser tab, but thats as far as it goes! if i link from emails or rss reader it goes stait to IE, arghhhhhhhhh! please i cant take anymore trawling!
Anyone?
Thanks a lot, I didn't know about EveryWan, loving it!
Use Opera first time launch method...
GrantyBaby said:
Right Peoples,
I'm having a right nightmare! Have trie both suggestion and followed to the letter. the only defference is that i'm using regedit opposed to guy's link.
Nothing is working. opera is default bet the browser tab, but thats as far as it goes! if i link from emails or rss reader it goes stait to IE, arghhhhhhhhh! please i cant take anymore trawling!
Anyone?
Click to expand...
Click to collapse
Since I wrote the post above I have discovered that using the internal Opera method is the best because not only does it reinstate Opera as the default for opening links from e-mails, but it also resets the default program for RSS reader which was driving me nuts.
I did mention this briefly previously, but simply load up Opera and then type opera:config in the address bar. This will bring up all the settings. Now find the 'Install' section and expand the section by tapping the word 'Install'. Now check the 'Browser First Time Launch' box and then tap 'Save'. It will come up with some nonsense about running a javascript command, but just select okay and then quit out the browser and re-start.
I found the above method reset Opera as my default for all apps, so hope it works.
Good luck,
G
Sure this works. Any way to reverse the setting ? i.e. not to make Opera the default browser anymore...
Gisbourne said:
Edit the registry as follows:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\: DEFBROWSER
"0"=Opera Browser
"1"="\Windows\OperaL.exe\"
After this everything should be hunkydory
Regards,
Guy
Click to expand...
Click to collapse
how can i make ie as default?
operamob is crappy.
exec228 said:
how can i make ie as default?
operamob is crappy.
Click to expand...
Click to collapse
in the US Tmobile TP2 it's set as this:
"0" = Pocket IE
"1" = :MSPIE
hope that helps
Gisbourne said:
Since I wrote the post above I have discovered that using the internal Opera method is the best because not only does it reinstate Opera as the default for opening links from e-mails, but it also resets the default program for RSS reader which was driving me nuts.
I did mention this briefly previously, but simply load up Opera and then type opera:config in the address bar. This will bring up all the settings. Now find the 'Install' section and expand the section by tapping the word 'Install'. Now check the 'Browser First Time Launch' box and then tap 'Save'. It will come up with some nonsense about running a javascript command, but just select okay and then quit out the browser and re-start.
I found the above method reset Opera as my default for all apps, so hope it works.
Good luck,
G
Click to expand...
Click to collapse
Gisbourne,
Could you help-out on how to set my Opera as default?. I tried your suggestion on Post # 3 & 11. But it did not did the trick. I tried also the following suggestion:
HKLM\Software\HTC\Manila2D\InternetWidget\
"OperaEXEFile"=<Path to Opera>
"WebBrowserType"=dword:00000001
I can't input the characters "dword:00000001" on WebBrowserType, coz I got only three (3) choices either Binary, Decimal or Hexadecimal. Tried to put the characters, but my home screen (M2D) keeps on reseting when I go to the widgets.
Maybe you still have something under your sleeve to help me out . Thanks in advance.
Hkeyclassesroot/http/shell/command, edit the file in command with the the address of the .exe of yhe browser you want to use. This is for RSS feeds.
Kurdminator said:
Hkeyclassesroot/http/shell/command, edit the file in command with the the address of the .exe of yhe browser you want to use. This is for RSS feeds.
Click to expand...
Click to collapse
Value data="\Windows\OperaL.exe"%1
I replaced the data to "\Windows\Opera9.exe"
Well it did not reset to home screen but when i clicked the IE browser opens.
Search for JZSmartMort, its a cab file. This will give you the option to select your default browser.
I will help you more with links and such, the problem is that im browsing on my HD.
Restore the reg data you edited in the http/command folder.
I just can't find the dang buggers!
I want to be able to cab all my settings back in. I've already got most manila config stuff (registry), but I just can't find opera's bookmarks, only the homepage. Since I've got a load of bookmarks, it's very tedious having to put them all back in after a ROM flash.
Who can help me?
The file is called Opera6.adr and it is in the application data\opera9 directory on your device.
Angelusz said:
I just can't find the dang buggers!
I want to be able to cab all my settings back in. I've already got most manila config stuff (registry), but I just can't find opera's bookmarks, only the homepage. Since I've got a load of bookmarks, it's very tedious having to put them all back in after a ROM flash.
Who can help me?
Click to expand...
Click to collapse
I saw an Opera9 map in \Application data, but I don't know which file(s) contain the bookmarks. It may be in there though, in stead of in the registry. I'll try to find them and report back here.
edit: I see someone beat me to that . Thx for clearing it up, now I now which file to backup (in stead of the whole directory)
rob_h said:
The file is called Opera6.adr and it is in the application data\opera9 directory on your device.
Click to expand...
Click to collapse
Interesting, turns out this file was located in \windows\Opera9 for me. That used to be the fix to show bookmarks in the opera tab in TF3D, which doesn't seem to work anymore anyway
It's not encoded/encrypted, so wordpad opens it just fine. Each bookmark has two values of which I can't determine the value;
ID==12 (why 12 and not 1?)
CREATED==1236695305 (I'd guess when it's created, but that doesn't look like a date/time.)
Anyone know what the rules are? Else I'll have to input them on my phone which takes more time.
At least I know which file to look for now, thanks!
EDIT: I modified ID to 1 and CREATED to 0000000001 and it works just fine, easy!
Angelusz said:
Interesting, turns out this file was located in \windows\Opera9 for me. That used to be the fix to show bookmarks in the opera tab in TF3D, which doesn't seem to work anymore anyway
It's not encoded/encrypted, so wordpad opens it just fine. Each bookmark has two values of which I can't determine the value;
ID==12 (why 12 and not 1?)
CREATED==1236695305 (I'd guess when it's created, but that doesn't look like a date/time.)
Anyone know what the rules are? Else I'll have to input them on my phone which takes more time.
At least I know which file to look for now, thanks!
Click to expand...
Click to collapse
Opera Mobile is a major pain to get bookmarks into. I had to install opera on my pc and import my ie faves into it. You can then copy the opera9.ard file from your desktop opera to your x1.
Angelusz said:
Interesting, turns out this file was located in \windows\Opera9 for me. That used to be the fix to show bookmarks in the opera tab in TF3D, which doesn't seem to work anymore anyway
It's not encoded/encrypted, so wordpad opens it just fine. Each bookmark has two values of which I can't determine the value;
ID==12 (why 12 and not 1?)
CREATED==1236695305 (I'd guess when it's created, but that doesn't look like a date/time.)
Anyone know what the rules are? Else I'll have to input them on my phone which takes more time.
At least I know which file to look for now, thanks!
EDIT: I modified ID to 1 and CREATED to 0000000001 and it works just fine, easy!
Click to expand...
Click to collapse
Hmmm there's one too.... probably the one in \Application data was from another build, or used in another rom. Now I've got my bookmarks back also
rob_h said:
Opera Mobile is a major pain to get bookmarks into. I had to install opera on my pc and import my ie faves into it. You can then copy the opera9.ard file from your desktop opera to your x1.
Click to expand...
Click to collapse
I've directly edited the file, much easier.
Gwystyl said:
Hmmm there's one too.... probably the one in \Application data was from another build, or used in another rom. Now I've got my bookmarks back also
Click to expand...
Click to collapse
What did you do to get the bookmarks showing again?
---
A related question: Where are passwords etc. stored? I'd guess in the other .adr files. It would be nice to have such things saved as well. I'm going to check all the files and see what they do ^^
EDIT: My bad, there is no other .adr files.. only encrypted .dat files...
Angelusz said:
Interesting, turns out this file was located in \windows\Opera9 for me. That used to be the fix to show bookmarks in the opera tab in TF3D, which doesn't seem to work anymore anyway
It's not encoded/encrypted, so wordpad opens it just fine. Each bookmark has two values of which I can't determine the value;
ID==12 (why 12 and not 1?)
CREATED==1236695305 (I'd guess when it's created, but that doesn't look like a date/time.)
Anyone know what the rules are? Else I'll have to input them on my phone which takes more time.
At least I know which file to look for now, thanks!
EDIT: I modified ID to 1 and CREATED to 0000000001 and it works just fine, easy!
Click to expand...
Click to collapse
Could I get that in a simplified version? This is something I would really like to be able to do.
These are my requests that I have which would actually "complete" my perfect HD2... if any members here would like to contribute some info as to how I may go about and fulfill them, then I would have much gratitude. Thanks
-Aside from the volume control that MysticGenious posted along with his taskbar, is there any other cab or registry change that will allow me to change my volume in increments of 1 as opposed to 3 bars each time? I am familiar with the paid app, but I do not want to go that route.. If mysticGenious created something that works when you use his taskbar, then I'm sure someone else has created something.
-Take the application "FootPrints" for example... Unless I have that activated on my tab screens, I am unable to create a shortcut so that I can save it on as a quicklink. This is the same with the HTC Calender App and any other tab application. If its not active in the Tab menu then the shortcuts doesn't exist. Is there a workaround? I would like to use Foot Prints, but I only want it as a quicklink, NOT as a Tab folder. I have already tried activating the tab and creating the shortcut to the quicklinks, but as soon as i removed it from the Tab Menus, it disappeared. There has got to be a way for this to happen. Cause I mean the program is there, but for some reason it only works if its active in Tabs.
-Transformers... I have tried reinstalling the Transformers cab but that didn't work. I just want to be able to click the Transformers shortcut and be able to select either 1 or 2 and then the movie instantly pops up. I have the movies saved on my sd card now, but because i moved them out of the SD card and onto my computer at one point in time, the link that connected them is no longer there. Basically I have all the components, I just need some guidance on how to make the shortcut link and work again... I'm assuming that i have to direct the file via registry editor "Total Commander" or something, I am just confused when it comes to that stuff on my HD2
and believe it or not, thats actually the only issues I have left with the phone, I'm sure that someone has a suggestion, or knows an answer... thanks a lot guys
i haven't given up hope on the members here....
anyone know any information about any of the 3 that i have listed??
*Update*
I have solved my transformers issue...
thanks for the help community???................................................................
ehhh......
well either way.. in case someone runs into the same situation heres the original thread...
http://forum.xda-developers.com/showthread.php?p=6392077#post6392077
cheers...
so any chances someone is gonna be able to point me in right direction for my other requests?? or perhaps even an answer??
cause this is a active hd2 forum, with many users willing to help out each other right???
one can dream.....
wrt links to footprints etc
you should be able to create your own shortcuts to the applications using File Explorer. footprints.exe exists in the Windows directory, you just need to copy it and past as short cut in the windows-start menu-programs directory. These short cuts shouldn't disappear when you disable the tab.
Lynehammike said:
wrt links to footprints etc
you should be able to create your own shortcuts to the applications using File Explorer. footprints.exe exists in the Windows directory, you just need to copy it and past as short cut in the windows-start menu-programs directory. These short cuts shouldn't disappear when you disable the tab.
Click to expand...
Click to collapse
yea you would think so right?? but unfortunately this is the case... and i'm wondering how would we be able to remedy this.. cause yea.. footprinks.lnk does not exist... until it is activated in tabs.. and even if i decide to make a shortcut of the footprints.lnk when it shows up.. the shortcuts becomes inactive one you deactivate the tab...
its WEIRD... i think what it is.. is that HTC put a lock on that application, since its one of their own.. so that it can only work if its activated under sense UI... which sucks..
but yea.. so i've already tried all the "doable" attempts... i'm basically asking someone who is more skilled to tell me whats going on... cause the developers can do amazing things.. this would be a walk in the park...