Cannot flash cooked rom, anyone same as me? - HD2 Windows Mobile 6.5 ROM Development

Dear all, I am come from Hong Kong
I tried to flash a cooked rom (I tried three of different cooked rom), but the phone keep crash, and everytime, when I reset the phone, it will be re-install the rom again......(Even I use HardSPL or SSPL to flash cooked rom)
the only solution is: I have to install a ship rom......
I really really want to change my Chinese ship rom!!!!
Is there anyone got a same problem as me??
Or just my phone's problem?
Anyone can help me please?!!

Did you take out your SIM card and SD card before flashing ?

kayzee said:
Dear all, I am come from Hong Kong
I tried to flash a cooked rom (I tried three of different cooked rom), but the phone keep crash, and everytime, when I reset the phone, it will be re-install the rom again......(Even I use HardSPL or SSPL to flash cooked rom)
the only solution is: I have to install a ship rom......
I really really want to change my Chinese ship rom!!!!
Is there anyone got a same problem as me??
Or just my phone's problem?
Anyone can help me please?!!
Click to expand...
Click to collapse
exact SAME thing used to happen to me, the way i solved it was to HSPL, the flash the phone from bootloader NOT with active sync connection

Lizzo said:
exact SAME thing used to happen to me, the way i solved it was to HSPL, the flash the phone from bootloader NOT with active sync connection
Click to expand...
Click to collapse
you mean enter to bootloader and use PC to flash it?
or enter to bootloader and run leoimg.nbh??

mobile88 said:
Did you take out your SIM card and SD card before flashing ?
Click to expand...
Click to collapse
I did it...but same problem...

Lizzo said:
exact SAME thing used to happen to me, the way i solved it was to HSPL, the flash the phone from bootloader NOT with active sync connection
Click to expand...
Click to collapse
I tried this, but still got the same error......

check bootloader screen
kayzee said:
Dear all, I am come from Hong Kong
I tried to flash a cooked rom (I tried three of different cooked rom), but the phone keep crash, and everytime, when I reset the phone, it will be re-install the rom again......(Even I use HardSPL or SSPL to flash cooked rom)
the only solution is: I have to install a ship rom......
I really really want to change my Chinese ship rom!!!!
Is there anyone got a same problem as me??
Or just my phone's problem?
Anyone can help me please?!!
Click to expand...
Click to collapse
check the bootloader screen to make sure hardSPL got installed
You should see a line saying
CotullaHSPL
if it is not there you are not free to flash

lakeman said:
check the bootloader screen to make sure hardSPL got installed
You should see a line saying
CotullaHSPL
if it is not there you are not free to flash
Click to expand...
Click to collapse
yes,I've checked
PB1100 HX-BC
SPL-1.42.SHPL XE
0x05
CotullaHSPL 0x30

I have the same experience.
I had HSPL already. I can only successfully flashed different roms
posted in internet.(such as Duttys, l3v5y, Taiwan CHT). I can only flash self-customize WWE rom by myself. However, I fail tens of time to flash HK-CHT
self-customized rom, even with different SYS and XIP by HSPL and SSPL.

libogen said:
I have the same experience.
I had HSPL already. I can only successfully flashed different roms
posted in internet.(such as Duttys, l3v5y, Taiwan CHT). I can only flash self-customize WWE rom by myself. However, I fail tens of time to flash HK-CHT
self-customized rom, even with different SYS and XIP by HSPL and SSPL.
Click to expand...
Click to collapse
Hello, libogen~
Where are you come from? Taiwanese?
you mean you can flash to Duttys, l3v5y and Taiwan CHT rom?
Is the Taiwan CHT rom official or cooked one?
Could you mind to tell me which version of your Duttys and l3v5y?
I want to try those rom!!
Thanks so much!!

libogen said:
I have the same experience.
I had HSPL already. I can only successfully flashed different roms
posted in internet.(such as Duttys, l3v5y, Taiwan CHT). I can only flash self-customize WWE rom by myself. However, I fail tens of time to flash HK-CHT
self-customized rom, even with different SYS and XIP by HSPL and SSPL.
Click to expand...
Click to collapse
thanks,babe!!
you are right!!
I installed Duttys's rom, its works!!!!!
thanks so so so much!!
But anyone know why we can only install some cooked rom only?

I am in Hong Kong.
I can flash the following rom to my HK HTC HD2:
l3v5y :
=====
http://forum.xda-developers.com/showthread.php?t=576578
Taiwan CHT cooked rom:
===================
http://www.xda-china.net/viewthread.php?tid=26951&extra=page=1&filter=type&typeid=1

um....I used Duttys about a half hour, it seems fine...
but after a half hour, same error......
WHY!??

i also got the same error, if i reboot the phone. the rom will be reinstalled again.
btw i bought my phone from HK,

Related

my htc tytn does not detect any sim !

hello,
my htc tytn does not detect any sim I don't know if it's a hardware or software problem, but when I go on device informaion that displays:
radio version: NONE
protocol version: NONE
what's you think?
r u having a bad flash? what r doing actually?
try to re-install the SHIPPED STOCK ROM. It may fix but may not also.
Good luck...
ultramag69 said:
try to re-install the SHIPPED STOCK ROM. It may fix but may not also.
Good luck...
Click to expand...
Click to collapse
how to re-install SHIPPED STOCK ROM?
connect with activesync and click on the RUU_Wrapper.exe file.
You need to find the stock rom first. Flash the shipped stock rom. It has to be the shipped rom or upgraded wm06 shipped rom so the cid will match and it MIGHT reflash the radio rom successfully. If you try ANY stock rom it WON't work.
Cheers...
Make sure you Hard SPL your Hermes after. It makes it easier to fix if something goes wrong with a flash , I'd suggest trying to fix first then install Hard SPL V7.
ultramag69 said:
connect with activesync and click on the RUU_Wrapper.exe file.
You need to find the stock rom first. Flash the shipped stock rom. It has to be the shipped rom or upgraded wm06 shipped rom so the cid will match and it MIGHT reflash the radio rom successfully. If you try ANY stock rom it WON't work.
Cheers...
Make sure you Hard SPL your Hermes after. It makes it easier to fix if something goes wrong with a flash , I'd suggest trying to fix first then install Hard SPL V7.
Click to expand...
Click to collapse
I can not install any wm06 shipped Roms, the download stops at 11% to 12% or 13%, I even installed (HTC_Hermes_SIM_CID_Unlock_v3a) but downloading continues to stop I understand nothing !
Please help me, I do not sleep more than anything to retrieve my radio!
Sorry mate, if you can't flash the shipped rom it means the radio has been corrupted and so can't be used as a phone anymore. Flash Hard SPL V7 then any cooked rom of your choice to use as a PDA but the phone can't be recovered...
ultramag69 said:
Sorry mate, if you can't flash the shipped rom it means the radio has been corrupted and so can't be used as a phone anymore. Flash Hard SPL V7 then any cooked rom of your choice to use as a PDA but the phone can't be recovered...
Click to expand...
Click to collapse
First, thank you for your interest in my problem
and how can I fix my rom radio now is that corrupted? for use as a phone

strange error after flashing my HD2 with TMOUS 2.02 ROM

hi people
i got my brand new HD2 unlocked a few days ago and it shipped with 1.43 ROM.
It was freezing occasionaly and so i thought a ROM upgrade would help.
i downloaded TMOUS 2.02 ROM and did a HSPL and then flashed my device with it.
now after flashing the phone works fine but i am getting three lines horizontally written accross the screen saying "HTC CONFIDENTIAL" and the other two lines are my IMEI number and anotherr number starting with HTC.
please help me because these lines are simply not going
i know i am a newbie
but i would really appreciate some help
trishul said:
hi people
i got my brand new HD2 unlocked a few days ago and it shipped with 1.43 ROM.
It was freezing occasionaly and so i thought a ROM upgrade would help.
i downloaded TMOUS 2.02 ROM and did a HSPL and then flashed my device with it.
now after flashing the phone works fine but i am getting three lines horizontally written accross the screen saying "HTC CONFIDENTIAL" and the other two lines are my IMEI number and anotherr number starting with HTC.
please help me because these lines are simply not going
i know i am a newbie
but i would really appreciate some help
Click to expand...
Click to collapse
The TMOUS 2.02 ROM is a test ROM so the "HTC CONFIDENTIAL" is there because of that. The 2.02 ROM dosnt handle a soft reset either. I recomend that you change to another ROM. Its not suited for everyday use.
I am a tourist too, but you are really an expert ...
Why the hack you are flashing a secret Test rom from htc???
There are a huge numbers of good cooked and/or stock roms available you can choose from.
As far as I was told the TMOUS 2.02 ROM is a test rom and will let you boot ONLY 1 time, so if you switch off your phone or do a soft reset - bingo - you will not be able to use your phone any more (no panic you can flash another rom).
But on top of it, I was told that this rom will send informations about your phone to htc ... once you are letting connect it to the provider and a data connection is up.
I guess this is why you see your IMEI on the screen.
There is ONLY one reason to flash this rom and this is to get the newer SPL on the phone instead of the normal 1.42 one, but than you have to know what you are doing and you need a OS rom which you can flash BEFORE letting the phone making a connection with the interenet ... (be carefull: you need a special OS whith the neccessary drivers for the new SPL, as far as I know it is NOT recommended to use this new SPL with cooked roms for the stock 1.42 SPL or the HSPL from bepe)
If there is no better advice from a real expert I would recommend that you flash your HD2 with a stock 1.66 rom for your region and than if you want you can HSPL again (or use the SSPL from bepe) and choose a rom which is suiting your needs from this forum.
Hope this is helping you.
Best regards
dingolino
PS: Who dares wins, but it should be a calculated risk at least ...
trishul said:
hi people
i got my brand new HD2 unlocked a few days ago and it shipped with 1.43 ROM.
It was freezing occasionaly and so i thought a ROM upgrade would help.
i downloaded TMOUS 2.02 ROM and did a HSPL and then flashed my device with it.
now after flashing the phone works fine but i am getting three lines horizontally written accross the screen saying "HTC CONFIDENTIAL" and the other two lines are my IMEI number and anotherr number starting with HTC.
please help me because these lines are simply not going
i know i am a newbie
but i would really appreciate some help
Click to expand...
Click to collapse
I flashed the 2.02 ROM using sd-card, so also flashed SPL 2.0
Been using it for 3 weeks now. No problems at all.
All the other bs on the web is just a myth!
were can i download TMOUS 2.02 ROM please ?
ts2 said:
were can i download TMOUS 2.02 ROM please ?
Click to expand...
Click to collapse
try here http://www.4shared.com/account/file/189102443/1edacd79/RUU_Leo_1_5_TMOUS_202531MASD_S.html i think thats the one you are looking for
thank you

Need Help Flashing Back to SPL 1.42

Hello all,
I recently purchased HD2, the first thing I did was going to HTC website and downloaded the latest ROM Version: 1.66.415.3, now my SPL version is 1.66000 XE. I searched the forum before posting this thread, but I did not find a clear post that answers my questions, and I am still a newbie in modding field, so please bare with me.
This ROM includes Arabic language support which I need, but its quite bugged, in away that most of the menus are in Arabic now, and even though I chose from the settings to have them in English, even disabling multi-language support wouldn't change the menus to English and they still are in Arabic.
More over some bugs, like the Arabic supported Keyboard will always play a very high click sounds, even if I reduce the volume, put it on Silent or Vibration, everything will be silent except for the Arabic Keyboard would still play the clicks.
So i thought there must be a fix for it, and the best possible way to do it in my opinion is Via installing HSPL, now the problem is I can no where find how I am able to Roll back to SPL 1.42 so that I can install HSPL, since i have SPL 1.66, So my question is, Does anyone know how and where can I roll back to SPL 1.42 so that I can install HSPL ?
My second question, Is there any Custom Rom that have full Arabic support meaning I can type and read Arabic Websites/Messeging/Email/MMS and such ? I saw Seatone's ROM that indicates Arabic Support, but I cant find anywhere to what extent it is ?
My third question is after rolling back to SPL 1.42 from SPL 1.66 and installing HSPL (assuming that this process is possible), Can I update to Newer SPL and still have HSPL installed ? or I would have to remove the HSPL in order to update my SPL ?
My last question is regarding RADIOS, can I install multiple RADIOS or I can only have one installed at a time ? Also for Backing up my ROM on my device (assuming I dont have the software on the PC), how do I do it ?
Eventually thanks for your time and consideration to help me in this matter, looking forward to hear some answers !!
All the official roms can be download here.
http://rapidshare.com/users/258XUJ
once download, I think you can just follow the procedures for removing HSPL to put it back to a standard factory state.
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
BAZ007 said:
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
Click to expand...
Click to collapse
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
fyase said:
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Click to expand...
Click to collapse
Oh thanks alot, explains much, Do you have any idea about my other questions ?
Is there any Custom Rom that have full Arabic support meaning I can type and read Arabic Websites/Messeging/Email/MMS and such ? I saw Seatone's ROM that indicates Arabic Support, but I cant find anywhere to what extent it is ?
After rolling back to SPL 1.42 from SPL 1.66 and installing HSPL (assuming that this process is possible), Can I update to Newer SPL and still have HSPL installed ? or I would have to remove the HSPL in order to update my SPL ?
My last question is regarding RADIOS, can I install multiple RADIOS or I can only have one installed at a time ? Also for Backing up my ROM on my device (assuming I dont have the software on the PC), how do I do it ?
Thanks alot in advance ...
BAZ007 said:
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
Click to expand...
Click to collapse
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Help
Good Night.
I have a HTC HD2 with the 1.66.0000 XE SPL, and with the following ROM "RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship"
Because i update the ROM from the HTC Website, and it gave me that ROM, after i update it i notice that it is in NLD (Nederland), now i want to install other ROM and i Can't.
I want to do HSPL but to do that i need the SPL-1.42.000, to have that SPL i have tried to install other ROMS, but it had failed all the times with the following Error ("ERROR [294] : INVALID VENDOR ID ").
Need some help with this, because e don't understand NLD (LOL), and i want to install a PTG ROM.
.
Can anyone give me a hand? I have Telstra HD2 using on ATT in the U.S. and flashed to this ROM
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
When I check the bootloader it says
SPL-1.42.HSPL
However when I try to HSPL it says.
You must have SPL 1.42.0000 and errors out. I read that if I flash any shipped OEM ROM it'll put it back to 1.42.0000 but it doesn't appear to be doing that.
Any help would be appreciated I'm trying to get any HSPL on this thing. I've also tried HSPL2 to no avail. It said bad ID or something.
Thank you in advance.
juiceppc said:
Can anyone give me a hand? I have Telstra HD2 using on ATT in the U.S. and flashed to this ROM
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
When I check the bootloader it says
SPL-1.42.HSPL
However when I try to HSPL it says.
You must have SPL 1.42.0000 and errors out. I read that if I flash any shipped OEM ROM it'll put it back to 1.42.0000 but it doesn't appear to be doing that.
Click to expand...
Click to collapse
1.42.hspl means hspl is installed, it MUST have been installed for you to flash that wwe rom.
flash what you want using usb and job done.you are seeing a problem that doesn't exist
Any help would be appreciated I'm trying to get any HSPL on this thing. I've also tried HSPL2 to no avail. It said bad ID or something.
Thank you in advance.
Click to expand...
Click to collapse
hspl2 doesnt work on telstra.
samsamuel said:
1.42.hspl means hspl is installed, it MUST have been installed for you to flash that wwe rom.
flash what you want using usb and job done.you are seeing a problem that doesn't exist
hspl2 doesnt work on telstra.
Click to expand...
Click to collapse
Thank you! I didn't even think to try. It worked. GTX right now!
fyase said:
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Click to expand...
Click to collapse
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Valenzuela said:
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Click to expand...
Click to collapse
You will want the WWE (World Wide English) Rom, it is there on that rapidshare link that was posted earlier .....
Valenzuela said:
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Click to expand...
Click to collapse
watcher64 said:
You will want the WWE (World Wide English) Rom, it is there on that rapidshare link that was posted earlier .....
Click to expand...
Click to collapse
STOP
when you say "us hd2" do you mean a tmous? t mobile us? because if yes, then those roms will kill your phone.
ONLY flash tmobile roms or tmous compatible cooked roms to a tmous.
hey.i really need help with this im New A THIS ...I JUST WNT TO FLASH MY HD2 BACK TO SPL 1.42.0000 .TO FLASH DROID ON IT..CAN SOMEONE PLZ HELP ME..JUST TELL ME WAT TO DOWNLOAD IN WERE TO GET EVERY THING ELSE THANK YOU...
Flashing from 2.10.000 to 1.43
Trying to flash a TMO HTC HD2 and I keep getting an update error 262.
ERROR [262, 276, 284, 302] : UPDATE ERROR
I have tried doing the soft reset 5 times now and I keep getting the same error. Am I doing something wrong that I am not seeing?
konspiracy said:
Trying to flash a TMO HTC HD2 and I keep getting an update error 262.
ERROR [262, 276, 284, 302] : UPDATE ERROR
I have tried doing the soft reset 5 times now and I keep getting the same error. Am I doing something wrong that I am not seeing?
Click to expand...
Click to collapse
There are NO 1.43 roms that will work on your tmous, you WILL permanently destroy it if you do manage to flash one. The tmous will ONLY take roms version 2.x or higher
you are very lucky that you dont have hspl installed, else it would let you flash, and your phone would be dead.
So what do we do if we have tmous and want to install HSPL?
orange_penguin said:
So what do we do if we have tmous and want to install HSPL?
Click to expand...
Click to collapse
use hspl3.

[SOLVED] Flashed Test ROM from SD Card & stuck with branded SPL 2.07

RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed_15.33.50 .07U_2.07.50.27_2_Test
OK I DID I RIGHT NOW...
Have branded Vodafone UK
Can't even flash back to Vodafone UK stock rom...
can't go back to HardSPL...
release was good...
phone doesnt work anymore...
flashed from sdcard.... after testing it...
i have just forgotten about hspl... and my branding...
after flashing... from sd
-> beppe hspl deleted -> PHONE BRANDED -> Not bootable NOT WORKING!
upgrade ROM code error
please try again
please... someone help me... hmm develop new HSPL [/QUOTE]
OK SOLVED BUT REMEMBER:
Flashed to RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed_15.33.50 .07U_2.07.50.27_2_Test THERE IS NO WAY BACK!!! you will have to stay with this rom until hspl 2 comes out!!!
IF YOU HAVE BAD LUCK, LIKE I DID, YOU WONT BE ABLE TO FLASH !ANY! OTHER ROM... NOT FROM SD CARD, GOLDCARD, USB, SSPL!
Click to expand...
Click to collapse
Yes i tried it with my goldcard... nada... otherwise i wouldn#t open this thread...
Custom RUUs... mtty... .exe usb... .nbh sdcard... everything
Same problem here bro!
Mine did work, but I accedently opeend the exe from 1.66 test rom and got this problem.
No I'm hoping that flashing 1.66 NLD will give me my phone back.
Otherwise MTTY
Fard succesfully flashed rom + custom rom using SPL 2.07
Edit:
1.66 NLD didn't work aswell
0028002 NOT Allowed it is saying to me.
xmoo said:
Same problem here bro!
Mine did work, but I accedently opeend the exe from 1.66 test rom and got this problem.
No I'm hoping that flashing 1.66 NLD will give me my phone back.
Otherwise MTTY
Fard succesfully flashed rom + custom rom using SPL 2.07
Edit:
1.66 NLD didn't work aswell
Click to expand...
Click to collapse
damn...
can#t sleep... need a beer...
a coldcard... maybe mine isnt gold anymore
Is there any way to make a goldcard without a hd2???
I already have the goldcard.img for my sd... my brother is sending his... maybe it will work...
ctman said:
damn...
can#t sleep... need a beer...
a coldcard... maybe mine isnt gold anymore
Is there any way to make a goldcard without a hd2???
I already have the goldcard.img for my sd... my brother is sending his... maybe it will work...
Click to expand...
Click to collapse
nope goldcard is serial related. I tried 3 of mine goldcards, still the same issue....
Gonna try wwe 1.66, The spl 2.07 vendor locks you, but now you have to find the correct rom tht get's accepted
flashing with sspl?
HD2Owner said:
flashing with sspl?
Click to expand...
Click to collapse
The thing is the screen shows the Trianlge.
And in Bootloader it says you need to upgrade rom.
But when you try to update it reboots at 1% giving diffrent errors.
xmoo said:
nope goldcard is serial related. I tried 3 of mine goldcards, still the same issue....
Gonna try wwe 1.66, The spl 2.07 vendor locks you, but now you have to find the correct rom tht get's accepted
Click to expand...
Click to collapse
had this problem yesterday, too... something went wrong flashing...
only through htc hotline i have found out: my phone is vodafone uk branded... and i didn't check my goldcard... maybe i deleted gold status some time ago...
THERE MUST BE A WAY TO MAKE A GOLDCARD WITHOUT THE HD2!
can you install a official 1.66-rom with sdcard-method and apply hardspl afterwards?
i guess the problem is: there is no 1.42-spl-rom for the TMOUS-CID......
HX-BC
SPL-2.07.000 8G XE
MicroP-Wrong Platform(0x1)
MicroP(Touch) 0x30
Bootloader status.
1.66 WWE didn't work... So I think MTTY is only option?
why didn't you just re-cook the 2.07-rom and use it with Hardspl???
new 2.07spl not needed. everything works with 1.42hspl.......
HD2Owner said:
why didn't you just re-cook the 2.07-rom and use it with Hardspl???
new 2.07spl not needed. everything works with 1.42hspl.......
Click to expand...
Click to collapse
SPL 2.0 gave me good battery life in 2.02, so that's why I wanted to upgrade SPL aswell.
Something went wrong during flash.
Cause fard even custom flashed spl 2.07, but he's sleeping now.....
hope we'll see a 2.0XHSPL soon....
Dont know if i can ever save my phone....
to HSPL you need a working... booting phone with 1.4 spl
MY hone is branded, too... and vodafone uk stopped hd2 sales and development... still 1.43 latest rom...
any suggestions? tried 20 roms... .exe / extracted via custom ruu-sspl .... and i tried the mtty... ... nothing
cant even flash back to my original branded rom...
any way making a goldcard with damaged HD2?!??
ctman said:
Dont know if i can ever save my phone....
to HSPL you need a working... booting phone with 1.4 spl
MY hone is branded, too... and vodafone uk stopped hd2 sales and development... still 1.43 latest rom...
any suggestions? tried 20 roms... .exe / extracted via custom ruu-sspl ....
any way making a goldcard with damaged HD2?!??
Click to expand...
Click to collapse
Fards know how to make a goldcard, but you have to wait a day.
If you don't have time for waiting use mtty....
One more thing to try is to flash TMOUS 2.01 or 2.02 and see if they can be flashed!!!!!
If they can beflashed, and i remember correct, they can be overwritten with the old hardspl afterwards.
Good luck!
smaberg said:
One more thing to try is to flash TMOUS 2.01 or 2.02 and see if they can be flashed!!!!!
If they can beflashed, and i remember correct, they can be overwritten with the old hardspl afterwards.
Good luck!
Click to expand...
Click to collapse
Already tried, but no succes.
I've been stuck with SPL-2.0 for a while now myself. Nothing gets it off including multiple goldcard attempts and full flashing of stock roms. It seems like it's there to stay, at least until we get a HSPL2.0 which I'm waiting for.
My radio version is stuck where it is but I can upgrade firmwares using SSPL which is nice. I just flashed Miri's latest 2.05 and everything works fine. Still, I hate having my SPL locked down like this.
balane said:
I've been stuck with SPL-2.0 for a while now myself. Nothing gets it off including multiple goldcard attempts and full flashing of stock roms. It seems like it's there to stay, at least until we get a HSPL2.0 which I'm waiting for.
My radio version is stuck where it is but I can upgrade firmwares using SSPL which is nice. I just flashed Miri's latest 2.05 and everything works fine. Still, I hate having my SPL locked down like this.
Click to expand...
Click to collapse
I had no problems flashing diffrent roms and spl's.
Was on 1.43, 1.48, 1.66, 2.00, but now i'm stuck @ 2.07

Which ROM for 9193 on AT&T?

Tried to load the official ROMs from the forum here, but both failed. Using a Telstra 9193 on AT&T. Can someone point me in the right direction? Do I need to load HSPL and a cooked ROM or is there something out there that's 'generic' I can use?
Sorry, new to the HD2. Already been through the ringer with my TyTNII but this is a new ballgame all over again, since I now have an overseas phone that's been flashed to another carrier.
Thanks!
you need hspl from the HSPL thread. NOT HSPL2, it wont work.
You need spl 1.42.0000 on your device to instal hspl, so if you have a later spl, 1.66.0000 for example, you need to find an earlier telstra rom to downgrade the spl.
Here, start reading.
I'm not a noob, already SPL'd my TyTNII, just needed to know which ROM was closest to the HTC OEM but unbranded from Telstra so I could start there and then begin noodling with what cooked ROMs I wanted to try.
Thanks for the pointer, I'll run HSPL and go from there. Just thought there might have been a generic HTC 9193 ROM available directly from HTC.
BillTheCat said:
Just thought there might have been a generic HTC 9193 ROM available directly from HTC.
Click to expand...
Click to collapse
the model doesn't make any difference (well, at least in your and my case, its only tmous users that have any pitfalls )
for the plain roms (look in the official roms folder, first post first link is a great start) look for wwe htc in the name.there the unbranded ones, and go from there.
samsamuel said:
the model doesn't make any difference (well, at least in your and my case, its only tmous users that have any pitfalls )
for the plain roms (look in the official roms folder, first post first link is a great start) look for wwe htc in the name.there the unbranded ones, and go from there.
Click to expand...
Click to collapse
Tried both and they failed, then went to this thread and tried downloading the below ROMS but keep getting a failure - Error 294 Invalid Vender ID. Trying with both these ROMs:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
What am I doing wrong here?
samsamuel said:
you need hspl from the HSPL thread. NOT HSPL2, it wont work.
You need spl 1.42.0000 on your device to instal hspl, so if you have a later spl, 1.66.0000 for example, you need to find an earlier telstra rom to downgrade the spl.
Here, start reading.
Click to expand...
Click to collapse
Sam, I"m stumped. I must be doing something wrong. I have SPL 1.66.0000 on my phone which according to the instructions should be fine for the current HSPL, but it refuses to load indicating 'incorrect product id'. I've also tried downgrading the SPL version via the card by extracting and renaming the .nbh file and copying it to the card, but when I hard reset, the phone goes directly from the bootloader to the screen which prompts me to reset the phone, rather than any option presented that enables me to load a different SPL.
I'm stumped. The standard generic WWE ROMs won't load, I can't get HSPL to load and I can't force it via the card. I must be doing something wrong but just can't seem to pin it down, other than the usual 'keyboard-to-chair-interface'. I never had anywhere near this trouble flashing my TyTNII.
What are your thoughts?
Here's what's on my bootloader screen:
PB81110 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
OS Version 5.2.21869
Manila Version 2.520121431.1
ROM Version 1.72.814.0 (82124) WWE
Hey Mate,
I have the 9193 and Flash whatever whenever, now i'm seeing tmous and EUR and Telsrtra and I'm getting worried, can some one please explain the difference?
Thanks in advance
On an aside, I'm running Win7 Premium 64bit. Might that have something to do with this?
OK guys - finally go it. Had to locate and flash the Telus 1.48 ROM which took me a while to find. Got HSPL loaded and flashed a clean cooked rom. Thanks for the help!
BillTheCat said:
OK guys - finally go it. Had to locate and flash the Telus 1.48 ROM which took me a while to find. Got HSPL loaded and flashed a clean cooked rom. Thanks for the help!
Click to expand...
Click to collapse
I've had the best luck with a 2.08 radio and the Touch extreme ROMs for AT&T and our phones. Data only drops occassionally.

Categories

Resources