Related
using pof herald beta tool,I decompiled c800 .nbh file,and rebuild it into a herald ruu file,successful write into my p4350,but badly,my herald bricked....
only can start with bootloader..
ipl remain: 4.17.0002(herald wm6 ipl)
but spl become: 1.09.0002(c800's spl)
I try to flash original rom that I used before,but it didn't work by ERROR300,and ppc screen stop at 0%. I TRY any ruu I can find,wm5 wm6,but the same ERROR300.
what can I do? is there any way to go?? or I have to change the flasher?
thanks all,plz help
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
pof said:
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
Click to expand...
Click to collapse
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
when I bought this,It display IPL 5.04.0002 SPL 5.04.0000 ,which rom can I use to fix???
plz give me one.thanks pof
by the way, which cid am I have now? htc p4350 or dopod c800?????
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
duprade said:
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
Click to expand...
Click to collapse
my phone is actually htc herald,no doubt of this,but I bricked it when I change the SPL IPL.... so the SPL had become wrong.
pof,,,,it really became no way out,I think I should go to the shop,and repair it with a new flasher.
I had tried all the language I can found on wiki and web. none of them can work.
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe (can use beforetime)
EURORUU_Herald_HTC_NOR_5[1].4.409.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe
ruu_herald_htc_dan_5[1].4.403.2_4.1.13.34_02.79.90_ship.exe
RUU_Herald_HTC_GER_5[1].4.407.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_RUS_1.8.411.3_02.71.90_Ship.exe
RUU_Herald_HTC_RUS_5.4.411.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_SPA_5[1].4.412.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
HTC_P4350_ITA_4[1].17.408.2_4.1.13.44_02.94.90_Ship.exe
HTC_P4350_WWE_4[1].17.405.2_4.1.13.44_02.94.90_Ship.exe(can use beforetime)
so sad..
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
itje said:
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
Click to expand...
Click to collapse
thank you all the same,but I don't have any problem with what you said.
okay thats good
crappy stuff, bricking
itje said:
okay thats good
crappy stuff, bricking
Click to expand...
Click to collapse
yes,thanks.
I would like to know if I change the flasher,can I make the trouble shoot?
didn't think it was possible to brick a herald. def gonna b more carefull now
yangchao8115 said:
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
Click to expand...
Click to collapse
me too and tried many rom but fail erro 300 0% stop IPL AND SPL 1.08.001 . it was died and waiting for new unbrick way
wooo...cost me 400rmb to make it repaired,changed a flasher and I now the make my herald superCID . after repaired I used the SDcard to flash the wm6ruu (using the file named heraimg.nbh on sdcard) .whatever it's ok now thanks everyone
I'm searching for the original german ROM for Polaris. In the ROM Section there is only O2 Version of it.
I am searching for it too...
i dumped mine. but i did not yet reflash it. i can upload it if you want to test it. but at your own risk.
ID: POLA100
ROM: 1.25.407.1 GER (12/17/07)
RADIO: 1.58.21.23
PROTO: 25.65.30.04H
SPL: 1.25.0000
CPLD: 2
Ok, pls upload, this is my last try.
http://rapidshare.com/files/102226089/RUU_signed.7z
it is the dumped OS, maybe its ok for all.
@ daze81
And, have you tried the image? Does it work?
had to search the tools for updating the rom with your version (after i tried the wm6.1 version
i let you know next days ...
thanks
cu camel
thanks would like to know if it works
Well, if the SPL isnt included, you basically can't brick your device (I might be mistaken about that though ). Youll always be able to fall back to the bootloader (multi color screen) and then just reflash a working ROM.
ok, there is no SPL included. i just dumped the original OS and rebuilded it. nothing else.
I guess I gonna give it a quick shot before I flash the next bepe... unless somebody else is first and confirms your working backup before I get the chance to do so.
Did anybody try?
Hi to all!
Did anybody try the original german Polaris dump (http://rapidshare.com/files/102226089/RUU_signed.7z)?
Or does anybody have a working original german ROM?
I don't want to flash another ROM before I don't have a working "backup" for warranty issues.
brgds
Andi
the user hyson told me that this rom seems to work. i did not test it for myself yet.
you'll need hard-spl and a custom ruu to flash it. then you can go back to original spl.
daze81 said:
the user hyson told me that this rom seems to work. i did not test it for myself yet.
you'll need hard-spl and a custom ruu to flash it. then you can go back to original spl.
Click to expand...
Click to collapse
Thanks for the information! Let's trust Hyson
@ Schaggo: sorry for full quote, but I have to say thanks for both information....
I got fed up with those cooked ROMs. I'm downloading and flashing the dazes dump (thanks bro!) right now. I'll report how dead my orbit is afterwards...
<edit hmm... yeah, it's looking good. Its booting, definitively German and everything seems in order... />
The ROM looks good ... seems to indeed be the orig. German ROM.
But what Radio ROM did Daze81's Polaris have ?
Since I may have to return my Polaris to HTC for repair, I want to make sure it's the way it was before I used some cooked ROMs. (And I can't remember what Radio ROM it had ).
Cheers,
Andreas
It has no Radio included. And if you want to go for warranty, you can reflash Radio 1.58.21.23 which was the original Radio.
You'll find it in the original German orbit 2 ROM thread which is linked in my signature. I provided the Radio as well in the other thread...
Schaggo,
thanks for the info and the link !
Cheers,
Andreas
dumped german rom
excuse me, how do i flash the xxxxx.7z file?? must I unzip it in any way??
thank you for answering
www.7zip.org is the tool of your choice. use the file inside this archive with Custom_RUU for example.
d
Dear all, I am come from Hong Kong
I tried to flash a cooked rom (I tried three of different cooked rom), but the phone keep crash, and everytime, when I reset the phone, it will be re-install the rom again......(Even I use HardSPL or SSPL to flash cooked rom)
the only solution is: I have to install a ship rom......
I really really want to change my Chinese ship rom!!!!
Is there anyone got a same problem as me??
Or just my phone's problem?
Anyone can help me please?!!
Did you take out your SIM card and SD card before flashing ?
kayzee said:
Dear all, I am come from Hong Kong
I tried to flash a cooked rom (I tried three of different cooked rom), but the phone keep crash, and everytime, when I reset the phone, it will be re-install the rom again......(Even I use HardSPL or SSPL to flash cooked rom)
the only solution is: I have to install a ship rom......
I really really want to change my Chinese ship rom!!!!
Is there anyone got a same problem as me??
Or just my phone's problem?
Anyone can help me please?!!
Click to expand...
Click to collapse
exact SAME thing used to happen to me, the way i solved it was to HSPL, the flash the phone from bootloader NOT with active sync connection
Lizzo said:
exact SAME thing used to happen to me, the way i solved it was to HSPL, the flash the phone from bootloader NOT with active sync connection
Click to expand...
Click to collapse
you mean enter to bootloader and use PC to flash it?
or enter to bootloader and run leoimg.nbh??
mobile88 said:
Did you take out your SIM card and SD card before flashing ?
Click to expand...
Click to collapse
I did it...but same problem...
Lizzo said:
exact SAME thing used to happen to me, the way i solved it was to HSPL, the flash the phone from bootloader NOT with active sync connection
Click to expand...
Click to collapse
I tried this, but still got the same error......
check bootloader screen
kayzee said:
Dear all, I am come from Hong Kong
I tried to flash a cooked rom (I tried three of different cooked rom), but the phone keep crash, and everytime, when I reset the phone, it will be re-install the rom again......(Even I use HardSPL or SSPL to flash cooked rom)
the only solution is: I have to install a ship rom......
I really really want to change my Chinese ship rom!!!!
Is there anyone got a same problem as me??
Or just my phone's problem?
Anyone can help me please?!!
Click to expand...
Click to collapse
check the bootloader screen to make sure hardSPL got installed
You should see a line saying
CotullaHSPL
if it is not there you are not free to flash
lakeman said:
check the bootloader screen to make sure hardSPL got installed
You should see a line saying
CotullaHSPL
if it is not there you are not free to flash
Click to expand...
Click to collapse
yes,I've checked
PB1100 HX-BC
SPL-1.42.SHPL XE
0x05
CotullaHSPL 0x30
I have the same experience.
I had HSPL already. I can only successfully flashed different roms
posted in internet.(such as Duttys, l3v5y, Taiwan CHT). I can only flash self-customize WWE rom by myself. However, I fail tens of time to flash HK-CHT
self-customized rom, even with different SYS and XIP by HSPL and SSPL.
libogen said:
I have the same experience.
I had HSPL already. I can only successfully flashed different roms
posted in internet.(such as Duttys, l3v5y, Taiwan CHT). I can only flash self-customize WWE rom by myself. However, I fail tens of time to flash HK-CHT
self-customized rom, even with different SYS and XIP by HSPL and SSPL.
Click to expand...
Click to collapse
Hello, libogen~
Where are you come from? Taiwanese?
you mean you can flash to Duttys, l3v5y and Taiwan CHT rom?
Is the Taiwan CHT rom official or cooked one?
Could you mind to tell me which version of your Duttys and l3v5y?
I want to try those rom!!
Thanks so much!!
libogen said:
I have the same experience.
I had HSPL already. I can only successfully flashed different roms
posted in internet.(such as Duttys, l3v5y, Taiwan CHT). I can only flash self-customize WWE rom by myself. However, I fail tens of time to flash HK-CHT
self-customized rom, even with different SYS and XIP by HSPL and SSPL.
Click to expand...
Click to collapse
thanks,babe!!
you are right!!
I installed Duttys's rom, its works!!!!!
thanks so so so much!!
But anyone know why we can only install some cooked rom only?
I am in Hong Kong.
I can flash the following rom to my HK HTC HD2:
l3v5y :
=====
http://forum.xda-developers.com/showthread.php?t=576578
Taiwan CHT cooked rom:
===================
http://www.xda-china.net/viewthread.php?tid=26951&extra=page=1&filter=type&typeid=1
um....I used Duttys about a half hour, it seems fine...
but after a half hour, same error......
WHY!??
i also got the same error, if i reboot the phone. the rom will be reinstalled again.
btw i bought my phone from HK,
RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed_15.33.50 .07U_2.07.50.27_2_Test
OK I DID I RIGHT NOW...
Have branded Vodafone UK
Can't even flash back to Vodafone UK stock rom...
can't go back to HardSPL...
release was good...
phone doesnt work anymore...
flashed from sdcard.... after testing it...
i have just forgotten about hspl... and my branding...
after flashing... from sd
-> beppe hspl deleted -> PHONE BRANDED -> Not bootable NOT WORKING!
upgrade ROM code error
please try again
please... someone help me... hmm develop new HSPL [/QUOTE]
OK SOLVED BUT REMEMBER:
Flashed to RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed_15.33.50 .07U_2.07.50.27_2_Test THERE IS NO WAY BACK!!! you will have to stay with this rom until hspl 2 comes out!!!
IF YOU HAVE BAD LUCK, LIKE I DID, YOU WONT BE ABLE TO FLASH !ANY! OTHER ROM... NOT FROM SD CARD, GOLDCARD, USB, SSPL!
Click to expand...
Click to collapse
Yes i tried it with my goldcard... nada... otherwise i wouldn#t open this thread...
Custom RUUs... mtty... .exe usb... .nbh sdcard... everything
Same problem here bro!
Mine did work, but I accedently opeend the exe from 1.66 test rom and got this problem.
No I'm hoping that flashing 1.66 NLD will give me my phone back.
Otherwise MTTY
Fard succesfully flashed rom + custom rom using SPL 2.07
Edit:
1.66 NLD didn't work aswell
0028002 NOT Allowed it is saying to me.
xmoo said:
Same problem here bro!
Mine did work, but I accedently opeend the exe from 1.66 test rom and got this problem.
No I'm hoping that flashing 1.66 NLD will give me my phone back.
Otherwise MTTY
Fard succesfully flashed rom + custom rom using SPL 2.07
Edit:
1.66 NLD didn't work aswell
Click to expand...
Click to collapse
damn...
can#t sleep... need a beer...
a coldcard... maybe mine isnt gold anymore
Is there any way to make a goldcard without a hd2???
I already have the goldcard.img for my sd... my brother is sending his... maybe it will work...
ctman said:
damn...
can#t sleep... need a beer...
a coldcard... maybe mine isnt gold anymore
Is there any way to make a goldcard without a hd2???
I already have the goldcard.img for my sd... my brother is sending his... maybe it will work...
Click to expand...
Click to collapse
nope goldcard is serial related. I tried 3 of mine goldcards, still the same issue....
Gonna try wwe 1.66, The spl 2.07 vendor locks you, but now you have to find the correct rom tht get's accepted
flashing with sspl?
HD2Owner said:
flashing with sspl?
Click to expand...
Click to collapse
The thing is the screen shows the Trianlge.
And in Bootloader it says you need to upgrade rom.
But when you try to update it reboots at 1% giving diffrent errors.
xmoo said:
nope goldcard is serial related. I tried 3 of mine goldcards, still the same issue....
Gonna try wwe 1.66, The spl 2.07 vendor locks you, but now you have to find the correct rom tht get's accepted
Click to expand...
Click to collapse
had this problem yesterday, too... something went wrong flashing...
only through htc hotline i have found out: my phone is vodafone uk branded... and i didn't check my goldcard... maybe i deleted gold status some time ago...
THERE MUST BE A WAY TO MAKE A GOLDCARD WITHOUT THE HD2!
can you install a official 1.66-rom with sdcard-method and apply hardspl afterwards?
i guess the problem is: there is no 1.42-spl-rom for the TMOUS-CID......
HX-BC
SPL-2.07.000 8G XE
MicroP-Wrong Platform(0x1)
MicroP(Touch) 0x30
Bootloader status.
1.66 WWE didn't work... So I think MTTY is only option?
why didn't you just re-cook the 2.07-rom and use it with Hardspl???
new 2.07spl not needed. everything works with 1.42hspl.......
HD2Owner said:
why didn't you just re-cook the 2.07-rom and use it with Hardspl???
new 2.07spl not needed. everything works with 1.42hspl.......
Click to expand...
Click to collapse
SPL 2.0 gave me good battery life in 2.02, so that's why I wanted to upgrade SPL aswell.
Something went wrong during flash.
Cause fard even custom flashed spl 2.07, but he's sleeping now.....
hope we'll see a 2.0XHSPL soon....
Dont know if i can ever save my phone....
to HSPL you need a working... booting phone with 1.4 spl
MY hone is branded, too... and vodafone uk stopped hd2 sales and development... still 1.43 latest rom...
any suggestions? tried 20 roms... .exe / extracted via custom ruu-sspl .... and i tried the mtty... ... nothing
cant even flash back to my original branded rom...
any way making a goldcard with damaged HD2?!??
ctman said:
Dont know if i can ever save my phone....
to HSPL you need a working... booting phone with 1.4 spl
MY hone is branded, too... and vodafone uk stopped hd2 sales and development... still 1.43 latest rom...
any suggestions? tried 20 roms... .exe / extracted via custom ruu-sspl ....
any way making a goldcard with damaged HD2?!??
Click to expand...
Click to collapse
Fards know how to make a goldcard, but you have to wait a day.
If you don't have time for waiting use mtty....
One more thing to try is to flash TMOUS 2.01 or 2.02 and see if they can be flashed!!!!!
If they can beflashed, and i remember correct, they can be overwritten with the old hardspl afterwards.
Good luck!
smaberg said:
One more thing to try is to flash TMOUS 2.01 or 2.02 and see if they can be flashed!!!!!
If they can beflashed, and i remember correct, they can be overwritten with the old hardspl afterwards.
Good luck!
Click to expand...
Click to collapse
Already tried, but no succes.
I've been stuck with SPL-2.0 for a while now myself. Nothing gets it off including multiple goldcard attempts and full flashing of stock roms. It seems like it's there to stay, at least until we get a HSPL2.0 which I'm waiting for.
My radio version is stuck where it is but I can upgrade firmwares using SSPL which is nice. I just flashed Miri's latest 2.05 and everything works fine. Still, I hate having my SPL locked down like this.
balane said:
I've been stuck with SPL-2.0 for a while now myself. Nothing gets it off including multiple goldcard attempts and full flashing of stock roms. It seems like it's there to stay, at least until we get a HSPL2.0 which I'm waiting for.
My radio version is stuck where it is but I can upgrade firmwares using SSPL which is nice. I just flashed Miri's latest 2.05 and everything works fine. Still, I hate having my SPL locked down like this.
Click to expand...
Click to collapse
I had no problems flashing diffrent roms and spl's.
Was on 1.43, 1.48, 1.66, 2.00, but now i'm stuck @ 2.07
As stated in the title, I'm about to flash back to the old version because the new T9193 telstra doesn't want me to install the HSPL. Anyone who's got the official ROM with 1.42 SPL for me, that's appreciated.
The only ROM I can get from the HTC website is the ROM with 1.66 SPL.
I'm not certain, but I believe this one has spl 1.42.0000
RUU_Leo_Telstra_WWE*_1.49.841.1_Radio_Signed_15.28 .50.07U_2.05.51.11_Ship.exe
Worth a try I guess
ClydeB1 said:
I'm not certain, but I believe this one has spl 1.42.0000
Worth a try I guess
Click to expand...
Click to collapse
thanks alot for that. I was wondering what's the worst if that's not the right ROM?
jcplus said:
thanks alot for that. I was wondering what's the worst if that's not the right ROM?
Click to expand...
Click to collapse
If not then just go back to your current rom.
that is the right one, telstra 1.49 has spl 1.42
by flash your ROM in this case, is the unlock neccessary? If I understand right, is the unlocking means I can get rid of the CID check to install any wrong CID or unsigned ROM. But if I want to install a CID matched ROM on my device, I don't need to isntall HSPL.
correct, you don't require hspl, because it is a telstra rom on a telstra phone.
Thanks for that! I'm gonna give it a go tonight, and let you guys know how it goes tomorrow.
Successful!!!
I hope people who has Telstra HTC HD2 can find something useful for them.
Greatly thanks to ClydeB1 and samsamuel!!!
I flashed a cooked ROM in and it worked. I restarted as one the applications asked.
Then the device freezed at the start up screen with the green HTC logo.
I have to hard reset the device and re-flash it.
Do you know what's wrong with it?
jcplus said:
I flashed a cooked ROM in and it worked. I restarted as one the applications asked.
Then the device freezed at the start up screen with the green HTC logo.
I have to hard reset the device and re-flash it.
Do you know what's wrong with it?
Click to expand...
Click to collapse
usually means you didnt flash a matching radio. Read your cooked rom thread, see what radios it recommends and compare to what you have.