Can someone verify if you connect a bluetooth device, hold down the button on the bluetooth, will the nexus one prompt to say a command and say for example "call john doe"
-Tortri
i cant find my bluetooth headset or i'd try... ill tell you it didnt use to work on my g1 though
It did not work with my Jabra HALO BT650s. I hear a tone on the headset but the phone does not do anything.
Damn..
Thanks guys!
Related
hello, everyone:
anybody know is there is any possibility to transfer phone call from bluetooth headset to Xda II, if I already use bluetooth headset to pickup phone :?:
Thanks
Have you tried clicking the headphone icon in the top status bar?
when a call comes into the phone, a dialog box pops up, allowing you to transfer the call to the phone. how long this stays there i do not know. the other option is to turn on the speaker phone by holding down the green button.
hope this helps
Smiley
As griffog indicates, click on the headset icon on the XDA II. A balloon window will pop up indicating that the "Bluetooth headset is on". Simply tap "Transfer call to phone", and there you have it!
HTH!
when I pick up phone, I don't have "headphone icon"
I guess that because I install "Pocket Bluetooth Tools" software
so maybe problem is the Pocket Bluetooth Tools
anyway, Thanks~
in my BlueTrek G2 headset, if you puch the "Talk" button for 2 sec during the call, it will be transfered to the device ... I guess this is a common feature in all headsets ... just try it
Biso007 said:
in my BlueTrek G2 headset, if you puch the "Talk" button for 2 sec during the call, it will be transfered to the device ... I guess this is a common feature in all headsets ... just try it
Click to expand...
Click to collapse
Thanks, I try this solution in my SORRYEricsson HBH-65 Headset, it not work, just can turn off my Headset.
Ha Ha~
I agree about the SE HBH 35 poor flexibilitity with my Qtek 2020. But as most of the "Blue tooth blues" regarding the XDA II, it's in part to HTC/M$ blame, since the same headset does an impressive job with my SE T-68 phone: voice dialing, call transfer to/from head set, head set incoming caller voice ID, etc.
So I keep thinking that BT is the worst part of the XDA II.
:evil:
BRosenow said:
As griffog indicates, click on the headset icon on the XDA II. A balloon window will pop up indicating that the "Bluetooth headset is on". Simply tap "Transfer call to phone", and there you have it!
HTH!
Click to expand...
Click to collapse
And to trasfer the call from Phone to Headset? Is it possible?
There is little information about this subject in the user manual - but I have tested this with my i-mate and SE HBH-30 BT heaset.
If I answer an incoming call with the headset and then transfer that call to the phone, I can then press the button on the headset and transfer it back.
If I make a call with the phone or answer a call with the phone, I can find no way to transfer it to the headset. Sorry.
HTH!
BRosenow said:
There is little information about this subject in the user manual - but I have tested this with my i-mate and SE HBH-30 BT heaset.
If I answer an incoming call with the headset and then transfer that call to the phone, I can then press the button on the headset and transfer it back.
If I make a call with the phone or answer a call with the phone, I can find no way to transfer it to the headset. Sorry.
HTH!
Click to expand...
Click to collapse
Ok Thankx
I am using a Plantronics 510 BT headset, but i can't figure out how to get the voice activation working.
I beginning to think that it is not supported, read the manual and afaik it doesn't mention the subject at all.
Has anyone got it working yet?
Tiemen said:
I am using a Plantronics 510 BT headset, but i can't figure out how to get the voice activation working.
I beginning to think that it is not supported, read the manual and afaik it doesn't mention the subject at all.
Has anyone got it working yet?
Click to expand...
Click to collapse
I am not sure I understand your question but I use a SonyEricsson stereo BT headset and when I press the "answer" button on the headset (when phone is not ringing) the "Voice Speed Dial" program comes up.
It does the same with all my jabra
Yes the voice dial function to dial numbers and startup programs is what I meant.
I got it working now
Apparently I have to hold down the button for a second or two to make it work.
Next time I should try a little harder to figure it
anonimo said:
I am not sure I understand your question but I use a SonyEricsson stereo BT headset and when I press the "answer" button on the headset (when phone is not ringing) the "Voice Speed Dial" program comes up.
Click to expand...
Click to collapse
Hi,
I've got a SE BT HBH-660 and when I push the asnwer button, I4ve got the "beep beep" in the speaker telling me that the Headset try to connect to the phone, but for some reason the Phone does not wake-up each time.
To make the voice dial working I need to ON/OFF the BT stack on the phone side.
When my SE BT headset is on and I make a phone call, not all the time the phone connect to the headset.
Did someone figure out the same behaviour ?
If yes how does it solve this ?
Ever since i have upgraded to Helmi's Rom and press the headset button i get the beep in my ear as normal, at this point i used to say "call and a name and work Etc.." and the call would be placed. But now since the ROM Upgrade i press the button i hear the beep in my ear then the sound dissapears from my ear and the phone beep to prompt me to say something, please can anyone advise me on what to do.
I used to be able to say "Play music" and i would hear the response in my headset and then the music would play through the headset, but it doesn't now it play through the phone speaker.
I am using MS VC 1.6
Also i would like the ringtone to sound on the Blutooth headset (Motorola H605) instead of the normal headset tone i know the headset supports the handsfree profile and it is set to Hands Free in the bluetooth settings, in fact this is the only choice i get.
Any help would be appreciated.
Richard
ricmoo2004 said:
Ever since i have upgraded to Helmi's Rom and press the headset button i get the beep in my ear as normal, at this point i used to say "call and a name and work Etc.." and the call would be placed. But now since the ROM Upgrade i press the button i hear the beep in my ear then the sound dissapears from my ear and the phone beep to prompt me to say something, please can anyone advise me on what to do.
I used to be able to say "Play music" and i would hear the response in my headset and then the music would play through the headset, but it doesn't now it play through the phone speaker.
I am using MS VC 1.6
Also i would like the ringtone to sound on the Blutooth headset (Motorola H605) instead of the normal headset tone i know the headset supports the handsfree profile and it is set to Hands Free in the bluetooth settings, in fact this is the only choice i get.
Any help would be appreciated.
Richard
Click to expand...
Click to collapse
Not sure I can be much help except to reassure you that I also have the same set up and it works fine (Helmi's AKU3.5 + MSVC1.6 UK). Have you checked the setting to use (settings>Voice command> 2nd 0option)?
Mav
mavrik64 said:
(settings>Voice command> 2nd 0option)?
Mav
Click to expand...
Click to collapse
I am not sure what you mean here what is the 2nd option, and can you confirm you have the same headset and does the ringtone play through it?
Thanks for your help
ricmoo2004 said:
I am not sure what you mean here what is the 2nd option, and can you confirm you have the same headset and does the ringtone play through it?
Thanks for your help
Click to expand...
Click to collapse
Sorry mate, I was in a rush earlier.
Settings>Voice command>notifications then select the option:
"Speak notifications if bluetooth hands free is available"
You could use the first option:
"Speak notifications using bluetooth hands free only."
Sadly my hands free is a Motorola H300 only, and yes, it plays the ringtone in my ear and tells me who is calling if they are in my contacts list )
Regards
Mav
I'm trying out voice command with my s9's and it's reall cool. One problem i have is that if i press the button on my s9's and say help, it wont do anything. But if i say dial or call, that's the only thing it does. So i went to the options and checked announce notifications through device speaker or wired headset only and it did work. I had it on the announce notifications using bt hands free if availabe which didn't work. I tried that patch for announcing calls and it works great. Now i need it to announce stuff on my headset, how can i do this? Also, when i press the button on my headset, it seems that i have to use the phone's mic to make announcements and i want to use the headsets mic.
I've read around and discovered that the HTC wired headset button only does pick up, and hang up. By pressing it twice it redials. I understood that a long press of this button can't be assigned.
I would like to change the double press option on the wired headset to activate Microsoft Voice Command. Is there a registry hack for this?
*Bump*
Or do I have to switch to a bluetooth headset.
erwindevries said:
*Bump*
Or do I have to switch to a bluetooth headset.
Click to expand...
Click to collapse
Unless something has changed...I think the only way to activate MSVC remotely is to use a bluetooth headset. It is a pain if you use nice sounding wired headphones and still need to drag out your phone to make a call. I can't believe WM hasn't fixed this issue. I had a voice dial button on my Sony Ericsson P800 headset from ...uh...6 years ago??? I hope someone proves me wrong because I listen to music all the time with a wired headset through an iPhone headset/mic adapter.
Here you go, all done:
http://forum.xda-developers.com/showthread.php?p=3235694#post3235694
V
vijay555 said:
Here you go, all done:
http://forum.xda-developers.com/showthread.php?p=3235694#post3235694
V
Click to expand...
Click to collapse
Thanks. I am now able to start MVC by double pressing the button on the wired headset.
I did so, by replacing:
\Windows\redial.exe
with a copy of \Program Files\MS Voice Command\voicecmd.exe
Now I can control my MP3's and dial whomever I want without reaching for my phone.
This didn't work with bluetooth redial.
Any ideas how to change the bluetooth redial command to something else ?
Nice one... was away to post the same question.
Glad I searched first
Thanks!