Database Users

Important - Question

Hi Dear Guys ,
Is it possible to flash stock rom of different seriel ( Region ) with out doing bepe hspl2 , i mean if i have stock rom with asian wwe and i download eu wwe from official htc site , can i flash that stock shiped eu wwe rom on my asian wwe serial hd2 with out doing any hspl or sspl
Thanks

Wow! Really important indeed!
If you'd have taken the time to read the stickies, you would know that it's not gong to work and you'll get an 'Invalid vendor ID' error message.
Why would you not want to flash HSPL? With HSPL2 available, it's easy to revert to stock SPL and flash a stock ROM, should you need to send your device for repair or anything.

No, you'll need to use either hspl or sspl.

@ tomasz
i was used before kovsky that was my 1st htc brand and its much differ with black stone
Dear Guys ,
according to study , stock spl only revert back by usb method , and my second question , after hspl2 can i use official ruu (htc offcial updater) for updating custom roms ? as i think if i use it to flash i dont need task29 as offcial updater clean even binary files .. any idea ?

newstar said:
@ tomasz
i was used before kovsky that was my 1st htc brand and its much differ with black stone
Dear Guys ,
according to study , stock spl only revert back by usb method , and my second question , after hspl2 can i use official ruu (htc offcial updater) for updating custom roms ? as i think if i use it to flash i dont need task29 as offcial updater clean even binary files .. any idea ?
Click to expand...
Click to collapse
HSPL2 can also be used to revert back to stock spl. After installing hspl, the flashing is the same as got the Blackstone, ie run the RUU. Some have used the official RUU instead of the CustomRUU to flash, but I haven't tried it and I just use Task29 prior to flashing. The whole thing from Task29 to installed rom takes only 5 minutes.

@ ClydeB1 Thanks
My stock HSPL is 1.66.0000
i can do any hspl2 version for me ?

You can do anything you want - HSPL2 is used to flash ALL version of HSPL and SPL

newstar said:
@ ClydeB1 Thanks
My stock HSPL is 1.66.0000
i can do any hspl2 version for me ?
Click to expand...
Click to collapse
As long as you choose one of the spl's ending in HSPL and not 0000 you can flash to any cooked or stock rom. Use HSPL2 again to return to your original spl when needed.

Help installing WM7 on HTC HD 2 Leo

Hello
First of all I have to tell you all that I have read almost every page on the forum and tried to follow every step but it ends up with a new thing to install. I need a guide from the beginning.
I have a swedish HTC Leo HD2 from sweden
PB81100
SPL 3.03.000
ROM-version 3.14.413.2 SWE
Radioversion 2.15.50.14
From what i can understand i need to install.
A rom from the beginning that supports 576 MB and radio.
I need to install HSPL
I need to install MAGLDR 1.11
Then i need to install MDJs_CyanogenMod7_v.2.6_NAND_A2SD+
The problems I have from the beginning is that i cant find a rom that supports 576 MB radio. And I have such a high SPL 3.03.000 so I cant install HSPL. So the bootloader MAGLDR 1.11 wont install and I am stuck.
So please guys will you help me with a little guide how I shall do this and link to the downloads I need.
Much Appreciated Goran

You need to go to HTCs website and download an earlier version of the 3.14 ROM - 1.66 (HTC) or 1.72 (if it is branded). You will need to use your phone's serial number to download the ROM.
Flash the ROM. Now your SPL will be 1.66.0000
Now you can run HSPL2 and select 2.08.HSPL
Download the 2.15.50.14 RADIO (look in the WinMo6.5 ROM sectrion on here for it) and flash the RADIO.
It is now ready to start the WP7 flashing process.

Pay Attention!!!!
goran.mitrovic said:
Hello
First of all I have to tell you all that I have read almost every page on the forum and tried to follow every step but it ends up with a new thing to install. I need a guide from the beginning.
I have a swedish HTC Leo HD2 from sweden
PB81100
SPL 3.03.000
ROM-version 3.14.413.2 SWE
Radioversion 2.15.50.14
From what i can understand i need to install.
A rom from the beginning that supports 576 MB and radio.
I need to install HSPL
I need to install MAGLDR 1.11
Then i need to install MDJs_CyanogenMod7_v.2.6_NAND_A2SD+
The problems I have from the beginning is that i cant find a rom that supports 576 MB radio. And I have such a high SPL 3.03.000 so I cant install HSPL. So the bootloader MAGLDR 1.11 wont install and I am stuck.
So please guys will you help me with a little guide how I shall do this and link to the downloads I need.
Much Appreciated Goran
Click to expand...
Click to collapse
Hey you dont need to flash HSPL2, search for the HSPL3 and flash that one after following fred_up's instruction and magldr 1.11 dont work for wp7 you need to flash 1.12 before you can flash wp7 into your hd2 dont forget that is the only bootloader that works for windows phone 7 dude, be care, dont brick your phone, dont forget to hit the "Thanks Button" happy flashing

When i tried to download from HTC an older ROM they say that my S/N is invalid. I dont know why. Can anyone upload the rom i need?

goran.mitrovic said:
When i tried to download from HTC an older ROM they say that my S/N is invalid. I dont know why. Can anyone upload the rom i need?
Click to expand...
Click to collapse
I think the stock rom should be there in the wiki

HTC HD2 Question

I just bought my HTC HD2 so I'm a newbie so my question is Why is there Hspl1 Hspl2 hspl3 hspl4? what is the need for 4 of them? Can anyone help me with this please.

The phone's BIOS allows you only to upgrade the ROM (operating system) with a newer version of the same of the one you already have installed. Thus you couldn't flash a custom ROM or even the standard HTC ROM if your phone came with an Telecom Operator branded ROM.
Why the different version of HSPL? They are developed up on the SPL that the phone came with or that was flashed with (as part of an official ROM update).

The main reason for different versions is the phones and stock spls that each version allows
Hspl regular and telstra with spl 1.42
Hspl2 regular with spl 1.42 to 2.08
Hspl1024 tmous only with spl 2.08
Hspl3 all models, spl up to 2.08
Hspl4 all models, all spls.

Ohh ok thanks alot for the information
So when I put my proper HSPL on my device I can install any custom rom too my phone?

You can use any Hspl for any rom, they don't have to match.
The exception is 3.14 roms which must have 3.03.0000 or 3.03.Hspl
If you are going down the nand android route, you must use 2.08.Hspl
It doesn't matter which version of Hspl.exe you use.
2.08.Hspl from Hspl2 is IDENTICAL to 2.08.Hspl from Hspl3 which is IDENTICAL to 2.08.Hspl from hspl4.

officialbambam said:
Ohh ok thanks alot for the information
So when I put my proper HSPL on my device I can install any custom rom too my phone?
Click to expand...
Click to collapse
Yes and no.
Sometimes there is no need of HSPL.
Some custom roms don't need the presence of HSPL.
It depends on your desired custom rom.
And additionally, if your desired custom rom is not based on STOCK ROM 3.14 you don't need to install HSPL3.03 with HSPL4.
Personally I'm using Artemis on my HD2 without HSPL.

These are new for me, now i knew about HSPL too, thanks for everyone.

uli71 said:
Yes and no.
Sometimes there is no need of HSPL.
Some custom roms don't need the presence of HSPL.
It depends on your desired custom rom.
And additionally, if your desired custom rom is not based on STOCK ROM 3.14 you don't need to install HSPL3.03 with HSPL4.
Personally I'm using Artemis on my HD2 without HSPL.
Click to expand...
Click to collapse
Thanks alot uli71
What rom would I need to get the WP7 on my hd2?

officialbambam said:
Thanks alot uli71
What rom would I need to get the WP7 on my hd2?
Click to expand...
Click to collapse
AFAIK STOCK ROM 1.66 as base and HSPL2.08 for MAGLDR.
I don't like to test WP7 on my HD2 because of the limited functionality at the moment and I'm very satisfied with Artemis.
So, to be sure have a look on HD2 Windows Phone 7 forums.

uli71 said:
Yes and no.
Sometimes there is no need of HSPL.
Some custom roms don't need the presence of HSPL.
It depends on your desired custom rom.
And additionally, if your desired custom rom is not based on STOCK ROM 3.14 you don't need to install HSPL3.03 with HSPL4.
Personally I'm using Artemis on my HD2 without HSPL.
Click to expand...
Click to collapse
it would have been a nice idea to mention not only that you don't really need HSPL, but also exactly how you got like that without HSPL, for those who haven't heard of SSPL or Goldcards.
Some custom roms don't need the presence of HSPL.
Click to expand...
Click to collapse
no custom winmo rom requires hspl, hspl (sspl, goldcard) are only required for the actual flash. Once the rom is loaded it will continue to work regardless of whether the spl is spl or hspl.

samsamuel said:
it would have been a nice idea to mention not only that you don't really need HSPL, but also exactly how you got like that without HSPL, for those who haven't heard of SSPL or Goldcards.
no custom winmo rom requires hspl, hspl (sspl, goldcard) are only required for the actual flash. Once the rom is loaded it will continue to work regardless of whether the spl is spl or hspl.
Click to expand...
Click to collapse
Maybe you are right and I wasn't precise enough.
I'm using Artemis ROM and there is no need to install HSPL3.03 or using a goldcard for flashing the ROM, if you can download STOCK ROM 3.14 from HTC homepage by entering your serial number or from your provider's homepage.
If there is no STOCK ROM 3.14 available for your device then you have to use HSPL or goldcard.
First you flash STOCK ROM 3.14 with its brought along installer and then the custom ROM (Artemis) with SSPL. Both from homescreen and your HD2 connected via Active Sync or Windows Mobile device center to your PC.

[Q] Changing rom

I have a htc touch hd blackstone with a blackstone henge rom however I want to change my rom to the energy rom.
Do I just follow this tutorial or what do I do ?
http://forum.xda-developers.com/showthread.php?t=505377

mickeystar said:
I have a htc touch hd blackstone with a blackstone henge rom however I want to change my rom to the energy rom.
Do I just follow this tutorial or what do I do ?
http://forum.xda-developers.com/showthread.php?t=505377
Click to expand...
Click to collapse
Basically, yes, follow guide and you cannot go wrong.
However, if you already have henge rom on your device then you may not need to follow the guide fully. Reboot device into bootloader and check your SPL to find out if USPL or HSPL was used to put Henge rom on your device
If your SPL states 1.56.Olinex then you have HSPL on your device and all you need to do is flash NRG rom
If your SPL states 1.54.0000 then USPL was used and you'll need to re-use it before flashing rom.
Hope this helps
Rick
p.s. In future post all questions in General forum.....which is where I have now moved this thread

HD2 don't install HSPL or any old Stockrom's with SPL

I have read many forums and many have tried, but I always get the bad seller ID or the update stops at 1%. I have tried following the instructions to install an older rom, but no one rom providers or agricultural work. On the HD2 is the 3:03 SPL ... I've tried all HSPL already, no success
I can easy way to install a HSPL or save the HD2 ...
it may be too late?
Please help:crying:

Trying to help you
Hi, I had the same problem yesterday with the 3.03 hspl and I found this clip on youtube and helped me a to put the stock 6.5 windows on my HD2 even with the 3.03 hspl.
Here is the link:
(it's in german but do the same as he is doing)
And then with my 3.03 hspl i downgraded it to 2.08 and installed ice cream sandwitch before few hours. If you want do do the same follow this link which is in english:
I just registred to xda-developers because I saw your thread with the problem and I hope I helped you to solve your bricked phone
Good luck!
( I'LL SEND YOU THE LINKS IN INBOX )