Hi again guys,
i've another problem with S2U2 ver. 2.14.
When i received an incoming calls and i pushed green button on my screen S2U2 doesn't answer to call and it blocked my device.
At that time the only solution is to reset my device.
Any ideas?
Thanks in advance,
Alessandro
Try uninstalling s2u2 and see if it works, if so try installing another version of that app.
And don´t forget to vote for Rhodium!
I had a similar problem. It didn't lock-up my phone, but when I hit the answer button, nothing would happen. I tried uninstalling then reinstalling, but no luck. I ended up turning off the caller ID in the S2U2 settings. Now, when I get a call, it opens up to the default caller screen. When the call is over, it locks the phone back.
i have a silmilary problem,
i have disable slide to answer
and now i think it's work
I use SlideToAnswer and it works great.
But, I disabled the 3rd party phone skin and changed the drawing method to Raw (or something similar).
Related
Hi,
been looking for a tweak about this, but haven't been able to find any.
Does anyone know how to disable the screen on the TyTN to turn on when receiving SMSs? It's very annoying, as the only notification I need is the beep sound and having the screen come to life everytime I receive an SMS is a hazzle when it comes to carrying it in my pocket. Touch-screens are a wonderful thing, but not turned on while in ones pocket. ;-) All sorts of nasty things could happen then.
Cheers,
Steffen
don't know how to totally disable this but you could use a program called mortsaver that lets you lock the screen a bit more like a conventional phone.
for example, I have to press the power button then the internet explorer button within 2s to unlock the screen.
when you receive a message the screen stays locked, although not when I get a call (might be able to change that tho).
I use spb pocketplus to put a 'lock' shortcut on my today screen that activates mortsaver.
I can't remember the website but google it and i'm sure you'll find it.
cheers
Thanks!!!
I've installed MortSaver 2.0 and it really does the trick!! Thanks for the advice.
Steffen
start->settings->sounds and notifications->notifications->event:new incoming SMS->uncheck "display msg on screen"
So, when i turn on the phone, the G-sensor/Gyrator are working pretty well. But when i make a phone call or answer one there's something going on afterwards. When i open an application and rotate the phone to landscape, the app automatically is closed and i'm stuck to the home screen (when restarted everything is back to normal till the next call). This is really annoing when browsing the net. Any suggestions?
exseed said:
So, when i turn on the phone, the G-sensor/Gyrator are working pretty well. But when i make a phone call or answer one there's something going on afterwards. When i open an application and rotate the phone to landscape, the app automatically is closed and i'm stuck to the home screen (when restarted everything is back to normal till the next call). This is really annoing when browsing the net. Any suggestions?
Click to expand...
Click to collapse
do not use GSEN
I have experienced a similar problem with SMS. I currently have Gyrator installed.
When i open a SMS and rotate the phone to landscape and try to use the keyboard, the app automatically closes and i'm stuck in the home screen.
I don't experience any other problems with other apps, just SMS & Email
This is really starting to annoy me.
I have checked WIKI which quotes
Simple enough, you could disable all rotation, then just use the "Windows Title" provided by Gyrator and select SMS and email tab (or others apps you wanted to rotate), add event and enable, then go rock with your Landscape full qwerty when typing SMS and emails.
Click to expand...
Click to collapse
Can someone explain this a little for me?
exseed said:
So, when i turn on the phone, the G-sensor/Gyrator are working pretty well. But when i make a phone call or answer one there's something going on afterwards. When i open an application and rotate the phone to landscape, the app automatically is closed and i'm stuck to the home screen (when restarted everything is back to normal till the next call). This is really annoing when browsing the net. Any suggestions?
Click to expand...
Click to collapse
Hi,
I have exactly the same issue.
WWE HD device.
gyrator2
after reset everything back to normal....
I stopped using Gyrator because I also got infrequent problems which seemed to be caused by this.
I now use AEB Plus with double press on the OK button to rotate the screen. I personally find this the simple way to rotate as I don't often need the rotate.
I disabled all rotation in Gyrator.
Then I only enabled the rotation for sms/mms, mail, tomtom, and just a few others.
Set the polling rate to 2 seconds.
It works oke now, except for the incoming call problem.
Thanks for the infos, i tried reinstalling the gyrator, made a phone call and everything was normal.
exseed said:
Thanks for the infos, i tried reinstalling the gyrator, made a phone call and everything was normal.
Click to expand...
Click to collapse
Which version do you have installed for gyrator?
I have 2008.12.10.1
HI,
did some additional testing.
It seems not to occur after just one phone call.
I rebooted the device and everyhting was oke (with rotating).
I made a call
I recieved a call.
Still everything is oké.
Anyone else got something to add as a fact?
ikkezelf1 said:
Which version do you have installed for gyrator?
I have 2008.12.10.1
Click to expand...
Click to collapse
Mine is the same.
Exceed: You havn't found anything that could help us out here?
No, mate, it just happend after i reinstalled the app. I don't know how and why.
Don't know what I did, but havn't had the problem for almost a whole day now...
Will update when I know more details.
Solved;
It was the 'darklord' coloured icons top bar cab file that caused the rotate to loose its focus.
I removed it and it worked.
Pitty that I don't see the percentages of the battery live not anymore...
with regards.
I really like some of the things about S2U2, and I apologize if this has been posted before...
I want to have something that will lock my screen but allow me to go back to where I was before I left off. The "system" lock that was put into the Telus ROM sucked, it completely removed whatever you were doing and cancelled back to the home screen.
I put on S2U2 and it was great, very pretty, etc. but when I was done with a call, I'd see the prompt come up with "Do you want to save this number?" but it locks immediately afterwards.
I also really like the TF3D interface that comes up when a call comes in, with their "slide to answer" function, and would also like to keep that.
So, basically, I only want the S2U2 to come on when I've put the device to sleep, not when resuming from receiving a call.... I'm asking too much, aren't I?
Is there any way to stop that?
Also, when putting it into Landscape mode, it buggers up the entire screen and I can't see anything. I don't have a screen shot, but it's a major annoyance.
The last problem you mentioned is already known. S2U2 has some problem in landscape if you used the album before.
Try to deactivate the caller ID in the S2U2 settings. I don't have any problem with S2U2 and incoming calls so far.
Sorry. not too sure by what you mean by album before. Can you explain what I have to change to get lanndscape to work?
I am using the T-Mobile US version of the HD2.
Whenever I make a call the dialer screen stops responding to touch, that includes the entire screen, not only the dialer buttons (sometimes if I rub the button it will respond, but most of the times it won't).
If I press the home button during the call the screen starts responding to touch again, but if I go back to the dialing screen its stops working again.
If I end the call using the hard button the dialer screen starts responding to touch again.
I hard reset the phone and the problem disappeared and then after a few days started again.
The proximity sensor works fine during the call and turns off the screen if I place the phone next to my face and turns it on again if I move the phone away from my face.
Anyone has a fix for this problem?
i had the same problem with one of energy's roms, but with all the flashing and different cabs, i never isolated the problem.
flash and rom and install your cabs one by one?
do you have bsb tweaks installed by any chance?
Same problem here, HD2 T-mobile dialer not responding
Same exact problem here.
Using the US stock HD2 T-mobile ROM with HTC sense Today's plugin disable (using spb pocket plus, phone weaver and Pocket Breeze instead).
Once I initiate a call the screen stops responding.
I used Kaiser Tweaks to change the dialer to the "Windows Mobiel Dialer"... now, the screen works fine, but when dialing a number I can't see any of the contact information. Also, with windows mobile dialer the proximity sensor is not working, so my face keeps activating buttons on the phone now.
Need help here!!!
I have BSB installed.
Also have many other cab's installed, so can't tell when or which software caused this.
Also, when tried to enable HTC sense again... the phone crashes... tooke me another 2 hours of reset'ing untill I was able to disable Sense and revert to windows 6.1 today's screen.
Turn off the BsB Tweak "tap time". That causes this problem.
johncmolyneux said:
Turn off the BsB Tweak "tap time". That causes this problem.
Click to expand...
Click to collapse
IT WORKED!!!!!!!!!!
The HD2 dialer is working again
Thank you!
Any idea why the WM dialer is not showing the contacts?
The fix worked, but...
That fix worked, the problem is I like the tap delay setting. without it I launch programs by mistake almost all the time while scrolling.
I tried to play with the registry value the fix changes:
HKLM/System/GWE/Touch/Filter/Minimumtaptime
the initial value is 0, the tweak changes it to 30, I tried lowering the value all the way to 10 and still every time the dialer screen stops responding while talking on the phone. It works fine once the value is reset to 0.
Does anyone know how to change the tap delay and stop the problem from happening? The answer might be found if we know why does it only happen in the dialer screen? Maybe there is a registry value for the dialer that is causing a conflict.
Thank you johncmolyneux!!! Enabled this recently to see how it worked and noticed the dialer stop responding, searched the forums and found this. Thanks!
Works like a charm!!
thanks, been looking for that for a long time...
changed BsB tap settings to off, soft reset, and now the HD2 touch screen works again during a call, so I can use the speaker and dialpad
Thanks a lot, Worked like a charm for me! Strange thing to include that tweak in BsB though - maybe works for other models/ROMs..
Heartfelt thanks
I recently updated my stock ROM and encountered this problem. After searching the forums I found this solution. MANY THANKS Mr M!
hello.
i've encountred something weird with s2u2 and wm6.5 on my hd2.
i get a call, and the full screen from s2u2 works for a second, but then the regular small and enoying caller canvas of the wm6.5 comes ontop of the
s2u2. when the ends the same thing happens but reversed. the wm shuts down and i can see the s2u2 screen for a second and then it disappears.
i've uninstalled BSBtweaks and CHTeditor cause i thouhgt maybe that's the problem. but no. still the same. even reinstalled s2u2. same thing.
maybe i should do a hard reset? can anyone point me to how to do it. it still doesn't promises resolts but i'm willing to try anything. i realy like the way
s2u2 "supose" to show the caller. i say "suppose" cause i haven't realy seen it or worked with it...
thanks for any reply...
I would recommend you turn off Caller-ID in S2U2, I have been doing this as the Sense Caller ID screen works in much the same way and offers like capabilities. Once you have turned off S2U2 Caller-ID, all should work perfectly!
yeah but
i really like a big full screen caller id. and with the s2u2 lock screen it seemed perfect...
So I would say you either go pretty or working, your choice... mine was for working
I have an issue also, when pressing the back button, it trigger volumn rocker button...any solution to this???