I really like some of the things about S2U2, and I apologize if this has been posted before...
I want to have something that will lock my screen but allow me to go back to where I was before I left off. The "system" lock that was put into the Telus ROM sucked, it completely removed whatever you were doing and cancelled back to the home screen.
I put on S2U2 and it was great, very pretty, etc. but when I was done with a call, I'd see the prompt come up with "Do you want to save this number?" but it locks immediately afterwards.
I also really like the TF3D interface that comes up when a call comes in, with their "slide to answer" function, and would also like to keep that.
So, basically, I only want the S2U2 to come on when I've put the device to sleep, not when resuming from receiving a call.... I'm asking too much, aren't I?
Is there any way to stop that?
Also, when putting it into Landscape mode, it buggers up the entire screen and I can't see anything. I don't have a screen shot, but it's a major annoyance.
The last problem you mentioned is already known. S2U2 has some problem in landscape if you used the album before.
Try to deactivate the caller ID in the S2U2 settings. I don't have any problem with S2U2 and incoming calls so far.
Sorry. not too sure by what you mean by album before. Can you explain what I have to change to get lanndscape to work?
Related
Hi,
been looking for a tweak about this, but haven't been able to find any.
Does anyone know how to disable the screen on the TyTN to turn on when receiving SMSs? It's very annoying, as the only notification I need is the beep sound and having the screen come to life everytime I receive an SMS is a hazzle when it comes to carrying it in my pocket. Touch-screens are a wonderful thing, but not turned on while in ones pocket. ;-) All sorts of nasty things could happen then.
Cheers,
Steffen
don't know how to totally disable this but you could use a program called mortsaver that lets you lock the screen a bit more like a conventional phone.
for example, I have to press the power button then the internet explorer button within 2s to unlock the screen.
when you receive a message the screen stays locked, although not when I get a call (might be able to change that tho).
I use spb pocketplus to put a 'lock' shortcut on my today screen that activates mortsaver.
I can't remember the website but google it and i'm sure you'll find it.
cheers
Thanks!!!
I've installed MortSaver 2.0 and it really does the trick!! Thanks for the advice.
Steffen
start->settings->sounds and notifications->notifications->event:new incoming SMS->uncheck "display msg on screen"
Hi
I have the new ROM from HTC which has the new feature for the phone "Slide 2 Answer\Reject".
While this is kinda cool, its really annoying me because everytime I get a call and phone is in my trouser pocket, while pulling phone out the screen drags against inside of pocket and rejects the call!! Seriously, I have rejected loads of calls since this feature
I prefer no silly answer like "dont put in pocket", "turn phone around" etc
Did install S2u2 but delay in response so uninstalled. I just want to go back to the original but far to thick to know how.
Any help?
Cheers
Go S2U2 settings and remove this function by selecting "off" inthere..
Hello all.
I have a TD2 with The original HTC WM 6.5 ROM.
I love it, but one thing annoys me:
The world clock that pops up when pressing the watch.
It gets in the way everytime the phone ring, and i grab for it in my pocket.
I have googled it, and searched this forum, and all i have been able to find was a cooked ROM that has it disabled, but also had othér changes i don't want.
Is there a kind soul inhere hwo knows a simpler way to disable this "world Clock" feature? (and is willing to share the secret with me )
Thank you in advance Humpeligimp
What World Clock?
I'm assuming you mean when you tap on the clock on the home screen, unless you installed something - SPB Time, or something else with a screensaver - which gives you a world clock?
I hate to suggest the obvious, but if you don't put the lock on when the phone is in your pocket there is potential for bigger problems than the Clock settings to be displayed - a feature, rather than a bug.
My suggestion would be to engage lock before pocketing phone - last time I forgot I made a long silent call, so I soon learned!
Yes that world clock.
I am sorry if it could be misunderstood.
The ringing phone in the pocket was just an example. (Of course i lock my screen)
What i realy ment was can it be disabled ?
To stop it from stealing focus when i accidentially taps the time.
I find it annoying, and i have no need know the time in some other country,
just from the front of my phone.
I like to link my clock so that when i press it, it launches second today. I do this using ssmaho 0.0.4.0. I suppose you could link it to take you to the home screen (ie. do nothing)!
Thank you. I'll check ssmaho and see.
Humpeligimp
hello.
i've encountred something weird with s2u2 and wm6.5 on my hd2.
i get a call, and the full screen from s2u2 works for a second, but then the regular small and enoying caller canvas of the wm6.5 comes ontop of the
s2u2. when the ends the same thing happens but reversed. the wm shuts down and i can see the s2u2 screen for a second and then it disappears.
i've uninstalled BSBtweaks and CHTeditor cause i thouhgt maybe that's the problem. but no. still the same. even reinstalled s2u2. same thing.
maybe i should do a hard reset? can anyone point me to how to do it. it still doesn't promises resolts but i'm willing to try anything. i realy like the way
s2u2 "supose" to show the caller. i say "suppose" cause i haven't realy seen it or worked with it...
thanks for any reply...
I would recommend you turn off Caller-ID in S2U2, I have been doing this as the Sense Caller ID screen works in much the same way and offers like capabilities. Once you have turned off S2U2 Caller-ID, all should work perfectly!
yeah but
i really like a big full screen caller id. and with the s2u2 lock screen it seemed perfect...
So I would say you either go pretty or working, your choice... mine was for working
I have an issue also, when pressing the back button, it trigger volumn rocker button...any solution to this???
Im running MattC Leo Sense which uses a slide/lock for both the phone lock and to answer phone calls. I was able to change the phone lock slider from up/down to left/right but I want to do the same with answering phone calls.
What happens with incomming calls is someone calls me and I pull my phone straight up and out of my pocket. When I do this, the phone rejects the call because the phone rubs against my inside pocket and slids the answer/slide to reject phone call. If I could change the answer/slide from up/down to left/right then this wouldnt happen.
Does anyone have this issue and/or know of a fix?
Thanks
saabguy123 said:
Im running MattC Leo Sense which uses a slide/lock for both the phone lock and to answer phone calls. I was able to change the phone lock slider from up/down to left/right but I want to do the same with answering phone calls.
What happens with incomming calls is someone calls me and I pull my phone straight up and out of my pocket. When I do this, the phone rejects the call because the phone rubs against my inside pocket and slids the answer/slide to reject phone call. If I could change the answer/slide from up/down to left/right then this wouldnt happen.
Does anyone have this issue and/or know of a fix?
Thanks
Click to expand...
Click to collapse
you can just set a screen lock on it and it doesnt show up until u unlock the screen lol.. thats wat i have or else it answers or ignores people in my pocket.. so with the connect the dot screen lock it just rings and shows u who it is until u unlock the screen...
Can you please tell me how you changed the unlocker from up/down to left/right. I would really appreciate.
Sent from my HD2
same problem here, i've tryed the lockscreen tactic. but i find that very annoying. I have no program skills but there must be some guy who can make a small apk that deletes the slider and replaces it with nothing =) so i can just use the hard buttons on my HD2...
Just to bring the issue up again im still having massive problems with calls being ignored or answered (depends on which way the phone is in my pocket)
Anyway have any idea, ive tried widget locker but that only seems to apply to lock screen and not phone call screen.
This issue had anoyed me for a while as well. I have tried widget locker and that works great for the phone lock, but as mentioned earlier in this thread - not for the incoming call locker.
If someone fixes this for the sense based ROMs, they will be my hero!
cyanogen mod ROM includes the "slide to answer" from lockscreen window similar to "widget locker" app. i just wish they would include the option to add widgets and shortcuts to the lockscreen like widgetlocker does
saabguy123 said:
Im running MattC Leo Sense which uses a slide/lock for both the phone lock and to answer phone calls. I was able to change the phone lock slider from up/down to left/right but I want to do the same with answering phone calls.
What happens with incomming calls is someone calls me and I pull my phone straight up and out of my pocket. When I do this, the phone rejects the call because the phone rubs against my inside pocket and slids the answer/slide to reject phone call. If I could change the answer/slide from up/down to left/right then this wouldnt happen.
Does anyone have this issue and/or know of a fix?
Thanks
Click to expand...
Click to collapse
I have the exact same problem, and looking for a fix.
same problem here
people hung up on me because phone answered in my pocket and they would hear noise while I'm removing it from my pocket/case >.>
setting a lock screen is so annoying, now I remove my phone carefully so I don't answer by mistake.
[edit] I've searched around the net, and downloaded a few new lock screens. there's one called "simply lock screen" it has an option to disable the slide to answer, and it will be replaced by the normal answer buttons you get when the device is not sleeping. it might work, but there's still chance that the answer/dismiss buttons will be pressed when you remove the device from the pocket
same problem here... no one has a clue yet?
the problem is htc sense...to avoid this problem i have switched to stock android builds...
There are a couple of apps out there that can help, the best I have found is Easy Answer Button. It is a bit tempermental, but if you install it as your last app after a fresh flash, it tends to work better - at least imho.
Others are Advanced Telephone (also free) and EZAnswer which will cost you a couple of bucks. (The link is to the 2 day trial).
+1 looking for left-right slide answer-reeject call, END call...
danielson84 said:
+1 looking for left-right slide answer-reeject call, END call...
Click to expand...
Click to collapse
Why don't you just delete htclockscreen.apk from system/app.
It will change sense up and down answer to left, right standard android lockscreen.
Use root explorer or the like and reboot afterwards to see changes.
Sent from my HTC HD2 using Tapatalk