I have myTouch and G1 but abd doesn't find my myTouch but it finds my G1 can anybody tell me what am I doing wrong or what am i not doing ???
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers
Original Post - [GUIDE] ADB, Fastboot, and Nandroid for Noobs
BoomBoomPOW said:
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers
Original Post - [GUIDE] ADB, Fastboot, and Nandroid for Noobs
Click to expand...
Click to collapse
thanks it worked
I got an HTC Legend that is branded to Vodafone. Trying to debrand it and following the Unlockr instructions--but the first thing to do is to set up android adb and load the windows drivers. I found the Windows drivers it did not work. I then found online a guy with advice on the two lines you need to add to the inf file--but it still does not work. I am on windows XP and getting frustrated because it looked like it copied over some driver files but it still is not recognizing the Legend.
Next I tried it on a mac but could not even find the USB drivers for mac. Google has now separated the inf file from the adb download. So the phone does not install itself automatically. So when i type "ADB devices" I don't get my phone serial number. So I am stuck. Any advice on how to do it with the Legend? All suggestions gratefully accepted.
Thanks
Jeff in Cali.
ferry99 said:
I got an HTC Legend that is branded to Vodafone. Trying to debrand it and following the Unlockr instructions--but the first thing to do is to set up android adb and load the windows drivers. I found the Windows drivers it did not work. I then found online a guy with advice on the two lines you need to add to the inf file--but it still does not work. I am on windows XP and getting frustrated because it looked like it copied over some driver files but it still is not recognizing the Legend.
Next I tried it on a mac but could not even find the USB drivers for mac. Google has now separated the inf file from the adb download. So the phone does not install itself automatically. So when i type "ADB devices" I don't get my phone serial number. So I am stuck. Any advice on how to do it with the Legend? All suggestions gratefully accepted.
Thanks
Jeff in Cali.
Click to expand...
Click to collapse
if your trying to use the android drivers you have to add a htc legend section into the drivers .inf file when you download the android sdk run the setup and only accept the driver then edit the .inf with your legend hardware ids and then it installs perfectly, this method works on both xp and win7
driving me nuts
could you show me how to do this please?
pics would be nice.
i'm also struggling to get my legend detected by any OS (XP, 7 x64, ubuntu x86).
doesn't seam to matter what i use (htc sync 2.0.33, PDAnet, drivers from websites - i've tried them all) i just can't get them to install and recognise my legend.
the thing i find a little worrying is that linux wont even pick up my legend in disk drive mode.
Hi, if you have installed htc sync it also installs the usb drivers.
after you install, unplug usb cable from phone, reboot computer.
after computer reboot plug in usb, hardware wizard shoud find a whole heap of new devices "android phone, adb. etc... on phone go into htc sync mode, more devices should be detected too. if none of these things happen you may have a usb device conflict with other usb devices connected (I had problems with a vodadfone wireless broadband dongle conflicting with other usb devices).
I have a legend with HBOOT 1.01 and i followed a guide on here
[guide] how to root HBOOT 1.01
I followed most of the steps (I didn't restore the backed up misc_backup.img) and the only problem i had was after i downgraded from froyo i needed extra drivers which are called "android 1.0". other than that I had no real issues that a reboot of computer didn't fix.
Hope this helps
I'm Italian, sorry for my English.
A few days ago I unlocked the bootloader via Toolkit, rooted and flashed the TWRP recovery _.
But I had hard difficulty:
After driver installed, I unlocked bootloader, enable debugging and then NOTHING!
In practice, the N7 was recognized by windows 7 64bit only in FastReboot mode ..
I tried in every way possible, deleted and reinstalled the driver 50 times, restored windows to a previous point, installed the drivers manually tried without toolkit, but how ADB just do not want to know.
For hours I was still with the bootloader unlocked but without root, until came to my rescue a friend with another notebook but same windows 7 64. Load the Toolkit, install the drivers and everything goes perfectly, I do everything in 5 minutes.
On my laptop there is always the issue driver ADB, in the future I still need my PC recognized the N7 in ADB, how can I do?
One thing that I think is not well understood is that there is no "Generic Class Driver" for ADB nor for fastboot...
... even though the very driver that works for one mode (or phone/tablet device) may be perfectly fine with a different device. The wire protocol for both fastboot and adb are extremely simplistic.
So, what that means is that if the Hardware ID used by the USB device endpoint registers on the bus with a different VendorID/ProductID, Windows will (correctly) not use a previously-installed ADB driver, or previously installed fastboot driver - even though they would probably work just fine.
Here is an example. The Nexus 7 registers the following Hardware ID when ADB debugging is turned on in the OS:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
On the other hand, if you are using TWRP, it's adbd daemon shows up on the PC as:
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
This means that you might need to install a different driver for using the ADB with the OS, and a different driver for ADB under TWRP - even though it is exactly the same hardware on the other end of the cable! In the absence of a generic class driver for a given USB endpoint, Windows tries to match drivers in it's local (& internet) database based on this VID/PID pair.
If you have a look at the [ADB/FB/APX Driver] Universal Naked Driver 0.72 thread - and download it and have a look at it's included "android_winusb.inf" file - you will see literally hundred of different VID/PID pairs in the driver's android_winusb.inf file in the installer package, corresponding to many hundreds of phones/tablets. Same driver with hundreds of devices listed as compatible.
In the past I recall taking the Google (SDK) USB driver, and manually editing into place matching VID/PID pairs for a HTC phone into the .inf file. It worked perfectly; I probably flashed that phone hundreds if not thousands of times using the Google Driver (My PC is a Windows 7 Pro x64 machine btw).
Anyhow, I have pulled this stunt twice now - once editing the .inf file for the Google Driver, and I did it once with the Universal Naked driver too. You can choose which driver you want to start with.
If you want to give it a roll, you can start with any of those three drivers:
- Google (SDK) USB driver
- XDA "Universal Naked" driver
- Asus Nexus 7 USB Driver (Look under Download)
Note that since you are using W7 x64, make sure that you add each new entries to the .inf file twice - once in the ".NTx86" section, and duplicated again in the ".NTamd64" section. When editing .INF files, make sure to use an editor which preserves simple text file formatting - use "notepad", not "wordpad"
If you want a reference for what values to use, see the bottom end of this post. You should see exactly these same values in your Device Manager, however.
Note that if you see the device show up in the Device Manager as being correctly identified and marked as "working normally" - but it doesn't work - you should probably remove that driver and re-install from a different driver package.
This would certainly be the case for any drivers you saw associating with VID/PID pairs that look like:
VID_18D1&PID_4E40 bootloader/fastboot
VID_18D1&PID_4E41 single adb
VID_18D1&PID_4E42*&MI_01 composite adb
VID_0955&PID_7330 avx mode
VID_18D1&PID_D001 adb in TWRP (maybe CWM too, I didn't check)
That's a lot to throw at you, especially with Italian <=> English in the mix.
Feel free to ask questions.
bftb0
Hello,
I tried to follow your advice but I have not solved.
I'll explain what I did, so you can correct me.
-Uninstalled previous drivers (from device manager, control panel)
-Restart the PC
-Modified the inf file. Package Asus Nexus 7 USB driver (ntx86 and NTamd64 sections) attach screenshots
-Linked N7 (usb debugging actived)
-Found portable device in device manager, update drivers manually from the Nexus 7 Asus USB drivers
I tried to change also too XDA "Universal Naked" driver by following the same procedure.
I tried to create another account on my pc, but no ADB!
View attachment 1734997
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
stonebear said:
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Use "Google USB drivers" you get after you install from here http://developer.android.com/sdk/index.html
Its drivers work with 4.2.2
I got 4.2.2. rooted with ADB working now via only this and no other method
No problem with adb in 4.2.2... I tested yesterday (no need psw too...)
stonebear said:
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Marco16V said:
-Found portable device in device manager, update drivers manually from the Nexus 7 Asus USB drivers
Click to expand...
Click to collapse
Is this the only device which shows up in the device manager? The "Portable Device" is either the MTP or PTP endpoint - not ADB. The latter (adb) should show up elsewhere in the device manager.
You should certainly NOT be trying to install fastboot/adb driver on MTP/PTP endpoints!
I think perhaps I am not understanding because I am guessing at certain details.
Q1) Do the drivers appear to install correctly?
Q2) When you have the N7 in the corresponding mode - whether or not you observe (device manager) "working normally" or "unknown device" - do you see the following Hardware IDs showing up in the device manager?
Bootloader Fastboot Mode:
USB\VID_18D1&PID_4E40&REV_0000
USB\VID_18D1&PID_4E40
OS adb:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
TWRP adb (Possibly also CWM adb, I haven't checked it) :
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
Q3) I presume you went through the same install sequence on your PC that succeeded on the other laptop - in the event the problem is a hardware problem, did you try a different cable or USB port on your PC?
Q4) When you remove drivers, are you requesting that the drivers be removed from the PC?
The 4.2.2 authentication issue might be an issue (although I suspect this is a adb program version issue, not a driver version issue. In any event, it wouldn't effect the behavior of adb in TWRP/CWM.
Sorry for all the questions.
bftb0 said:
Is this the only device which shows up in the device manager? The "Portable Device" is either the MTP or PTP endpoint - not ADB. The latter (adb) should show up elsewhere in the device manager.
You should certainly NOT be trying to install fastboot/adb driver on MTP/PTP endpoints!
I think perhaps I am not understanding because I am guessing at certain details.
Q1) Do the drivers appear to install correctly?
Q2) When you have the N7 in the corresponding mode - whether or not you observe (device manager) "working normally" or "unknown device" - do you see the following Hardware IDs showing up in the device manager?
Bootloader Fastboot Mode:
USB\VID_18D1&PID_4E40&REV_0000
USB\VID_18D1&PID_4E40
OS adb:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
TWRP adb (Possibly also CWM adb, I haven't checked it) :
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
Q3) I presume you went through the same install sequence on your PC that succeeded on the other laptop - in the event the problem is a hardware problem, did you try a different cable or USB port on your PC?
Q4) When you remove drivers, are you requesting that the drivers be removed from the PC?
The 4.2.2 authentication issue might be an issue (although I suspect this is a adb program version issue, not a driver version issue. In any event, it wouldn't effect the behavior of adb in TWRP/CWM.
Sorry for all the questions.
Click to expand...
Click to collapse
When the drivers are not installed and I connect to pc N7, is only recognized as a portable device, then later recognized as Google Nexus 7.
To install the drivers (modified as described) I click reinstall driver, then later recognized (if connected to pc in android mode, with usb debugging actived) as Android Device in another voice, ADB interface. But is not recognized by the toolkit under adb devices, and even when I try using cmd.
1-When I install the drivers. seem to be installed correctly.
2-Sorry, where can I find Hardware IDs in Device Manager? What is the difference between OS adb and TRWP adb?
3 - In other pc (with same N7, same cable, same driver, same toolkit) I had no problems. I tried to change only the USB port.
4-I uninstall the driver from device manager (uninstall voice) and ask to be also uninstalled software from the PC
In some Italian forum, I found people with the same problems.
Solved by formatting PC. I would not do that ...
Thanks for your help, sorry for my English and my limited skills
AW: No ADB mode, driver issue?
Try to download the latest Android SDK and try to connect with that adb version. Adb with version < 1.0.31 will not work correctly with Android 4.2.2.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
Try to download the latest Android SDK and try to connect with that adb version. Adb with version < 1.0.31 will not work correctly with Android 4.2.2.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I tried sdk but I have not solved.
I use Android 4.2.1. I'm having problems with the update! I can not update OTA (N7 stuck under the impending reboot). I also tried to download the zip file to upgrade the memory and flash it from recovery but the installation is not completed (error 7 build.prop).
I also tried to flash the factory image 4.2.1 (keeping userdata) and start again. Nothing, same mistakes!
Too many problems!
Marco16V said:
2-Sorry, where can I find Hardware IDs in Device Manager?
Click to expand...
Click to collapse
(Note I attached some pictures below)
From the Device Manager:
- Select the Device in question by right-clicking. Choose "Properties"
- A window with three tabs will appear: General, Driver, and Details. Select Details
- The "Property" combo-box-selector has 20 or 30 items - the 2nd one in the list is Hardware Ids. I attached two pictures from Win7-Pro-x64 (below)
But note as I said before: You should NOT be seeing the ADB endpoint under "Portable Devices" - if ADB Debugging is turned on in the OS, you should see it under "Android Phone" or something similar. In any event, the hardware Ids will identify it exactly
Marco16V said:
What is the difference between OS adb and TRWP adb?
Click to expand...
Click to collapse
Well, as far as the behavior of the USB driver on the PC, almost nothing. Unfortunately - for better or for worse - both TeamWin (TWRP) and CWM authors put their ADB interface on the bus with the VID/PID pair of USB\VID_18D1&PID_D001, whereas the OS puts all its USB interfaces on 18D1/4Exx.
So, even if you get a driver installed for the OS "adb" mode (say by using the Google SDK USB driver or the Asus Nexus 7 driver), it won't work for the custom recovery... unless you fix up the driver installer package to have the matching VID/PID pairs (18D1/D001) in the .INF file for that driver.
I think folks find this confusing - they think, "wait, I have a ADB driver installed" - why does it not work?
OK, there are a couple more things to try (at least before I give up). Roughly they try to answer these questions:
Q1) Is this a toolkit issue, or a driver issue?
Q2) Is it a prior driver you installed that you are not observing that is causing the problem?
The first one (Q1) is easiest to diagnose: when your PC Device Manager indicates that a device is "working normally" - AND THE VID/PID ID MATCHES WHAT YOU SHOULD EXPECT FOR THE MODE THE TABLET IS IN (regular OS, recovery boot, fastboot mode), can you communicate with the device from the Windows command line? e.g.,
Code:
C:\foo> cd C:\blahblah\sdk-platform-tools-directory
C:\blahblah\sdk-platform-tools-directory> fastboot devices
or
C:\blahblah\sdk-platform-tools-directory> adb devices
If you can communicate with the tablet from the command line - your device ID will be printed by the above commands, then you don't have a driver problem at all - there is something screwy about the way your toolkit is installed.
OK, Q2 -
When Windows installs a driver, it caches it into a kind of database. I suppose it is possible that a prior driver installation might be causing trouble. You can observe - from the device manager - all the drivers that are installed - even for devices that are not currently connected to your computer.
This is done by setting the "devmgr_show_nonpresent_devices=1" environment variable. It can be done semi-permanently this way, or for a single invocation of the device manager this way..
See the third image attached (devmgr-all-devices.jpg ) - it is my computer in that "show all devices" mode. See all that rubbish in there? It's from other Android devices (HTC, Samsung, etc).
You can walk through each one of those - even the devices that are not currently attached - and inspect the VID/PID pair to see if they happen to match the values that you are expecting to see for the different operating modes on the Nexus 7. I'll leave it up to you whether you want to do this or not; it is a bit tedious. Just don't start deleting drivers willy-nilly if you don't know what they are associated with.
Marco16V said:
Thanks for your help, sorry for my English and my limited skills
Click to expand...
Click to collapse
I am understanding everything you are saying - and your english is far better than my italian
good luck!
I'm having trouble getting the proper usb drivers loaded so i can root my new Nexus 7. I downloaded the Android SDK, unzipped and expanded the google drivers, but my Vista computer keeps giving me an error like "windows found driver software for your device but encountered an error while attempting to install it". It shows the driver as Android Composite ADB Interface. Please help!!
You need to disable your computer's driver signature enforcement.
1)by the way - delete your device from Laptop`s device manager and unplug and plug again cable to you Nexus
2)download last version of ADB and Fastboot
3)check at storage menu - preference - camera (not mtp)
4)enter in developer item in settings menu and check USB debug - Android `ll show your alert message with mac adress of you Laptop - you must accept it
!!! Do not try to use some other sofware for rooting (this is bad idea)- you must doing it in fastboot by myself!!!
I downloaded latest ADB/Fastboot package to my Win 7 PC.
I installed the Zadig drivers exec to load drivers (as seen in another thread).
Enabled USB debug
Connected phone
ADB devices ... doesn't show phone
Phone shows ADB icon in task bar
In device manager I can see libusbK USB Devices .. ADB Interface (Interface 1) .. when I plug the phone in
I have revoked previous computers and rebooted both PC and phone with no changes
... now I am a bit lost
* Bump * .. I can't do much without ADB ... could someone at least point me to the correct drivers - what I have downloaded from Zadig do't seem to work.
I'm currently having the same problem of not being detected when I type in "ADB devices" in Windows 10 after an auto-update which can't be stopped screwed up my drivers. I found this thread while searching for an answer myself. I tried reinstalling all Qualcomm and fastboot drivers and even though my phone can be detected in Windows again (after manually selecting "MTP USB Device" as a driver update for the A7 in the device manager) I still get nothing when I type in ADB devices. Though I tried flashing something to it anyway (same TWRP recovery I already have since the file was already there) and it seemed to work? Have you tried flashing something to your phone anyway?