Database Users

K-Jam / Windows Mobile 5 & TomTom 5

Anyone got TomTom 5 working with Windows Mobile 5?
I received my k-Jam this morning but the setup.exe bombs out so I cannot get TT5 installed at all
any help appreciated!
thanks

Try to install the .cab file instead, it should work.

thanks but I have tried that. 3 of the 4 CAB files install but the main one (ttn.cab) - looks like its going to install ok and then you get "the file....installation was unsuccesful".
Any ideas?
Nothing on the TT site - I'm surprised that X51v or other early Windows Mobile 5 users have not been onto this one?
It seems like a problem with Activesync 4.0 initially but as the cab files don't work i guess we need a patch from them?
anyone got it working?
thanks

TomTom 5 install Problem
I had the same problem with the auto run procedure on my mini SD card.
I solved the problem by navigating to the '2577' folder and running each cab file directly on the phone (didnt use activesync). This seemed to work for me.
However, now Im having trouble with bluetooth com ports. Tomtom configuration does not show the port numbers assigned to my paired gps reciever.

Try this
http://forum.xda-developers.com/viewtopic.php?t=29282&highlight=tt5+kjam+qtek+wm5
Let me know how well tt5 runs on the k-jam ie how smooth etc as i'm awaiting my miniSD so can't try it yet!

TomTom Navigator 5.10 works with Windows Mobile 5 and Activesync 4 - but it's NOT easy. The instructions in this thread got it working for me (though I used COM4 instead of COM0):
http://forum.xda-developers.com/viewtopic.php?t=28386
Also I found that the bluetooth GPS had to be locked on to a signal for TomTom to see it at first - was fine after that.
Although my device is a HTC Universal, it has the same OS and Activesync version as your Wizard so there's no reason why it shouldn't work. Go to the above link and enjoy :lol:

Re: re: K-Jam / Windows Mobile 5 & TomTom 5
hampers said:
thanks but I have tried that. 3 of the 4 CAB files install but the main one (ttn.cab) - looks like its going to install ok and then you get "the file....installation was unsuccesful".
Any ideas?
Nothing on the TT site - I'm surprised that X51v or other early Windows Mobile 5 users have not been onto this one?
It seems like a problem with Activesync 4.0 initially but as the cab files don't work i guess we need a patch from them?
anyone got it working?
thanks
Click to expand...
Click to collapse
I had the same problem. All cabs would install except the ttn cab. Here's how I solved it.
1. uninstall everything
2. install gps.cab
3. remove sd card and soft reset (this is the important bit)
4. install ttn.cab and this time it should work

Thanks for your help guys.
sl9; How did you get 5.1 to upgrade? After copying the files from the downloaded RAR file I tried to run the setup.exe file on the phone but get a message telling me that the file is not a valid windows mobile program (perhaps it is a smartphone program).
[/quote]

aikibrown said:
Thanks for your help guys.
sl9; How did you get 5.1 to upgrade? After copying the files from the downloaded RAR file I tried to run the setup.exe file on the phone but get a message telling me that the file is not a valid windows mobile program (perhaps it is a smartphone program).
Click to expand...
Click to collapse
The setup.exe is meant to be run on your PC, it uses activesync. Obviously we know this doesn't work so the solution is to get the 5.10 upgrade from TomTom website as the ZIP FILE, NOT THE EXE - this is important
Anyway, extract the zip, and copy the directory with the 4 cab files in it to your SD card (where you have the map on). Then execute the cabs one by one, using the tip by jdee246 above if any of the cabs don't want to install.
After you install it, then the fun begins trying to get the damn thing to recognise your GPS device, see the link in my earlier post for a guide

Thanks guys - the soft reset seemed to do it. The manual install worked fine in the end.
I now have to wait for TomTom support to give me a code as I already had two a few months back so I can't report on how well it runs yet. Overall tho the Wizard/k-Jam is pretty slow - esp for screen refreshes.
I did try the BAKONL hack which I use to test TomTom on various devices but the ttn.cab on that patch just will not install for me under Win Mob 5.
thans

Thanks to all for your help.
Managed to get Tomtom 5.1 up and running. 5.1 seems to have fixed the gps connectivity problem.
The software runs on the K-JAM just as fast as it did on my QtekS110, with no problems yet.

aikibrown said:
Thanks to all for your help.
Managed to get Tomtom 5.1 up and running. 5.1 seems to have fixed the gps connectivity problem.
The software runs on the K-JAM just as fast as it did on my QtekS110, with no problems yet.
Click to expand...
Click to collapse
Hello ,
How can I install the folder "voices" because it's not a ".cab" ?
Thanks for your help.....

Who had install Tomtom 5 on the K-jam ?
Because it's too hard for me and I don't understand everything .... :?
Thanks for your help !!!!
:idea:

In total you have to copy 4 files from your wm2003 device and paste to wm2005 in these dir:
mobile device\tomtom\CurrentMap.dat
\TomTom\TomTom\data05.bmp (voice files on cd)
\TomTom\TomTom\data05.chk (voice files on cd
\Program Files\navigator\data.chk
\Program Files\navigator\tomtom navigator.exe
\Program Files\navigator\navigator.cfg
that's all.
data05.bmp and .chk is for example, you can choose one of your own voices.
Look this up on your device other wise i send you my files so you can try them.
Good Luck
GuidO

Thanks for your help !!!!!
I try this tomorrow ....
regards.

T-Mobile MDA Compact
Hi Guys
I seem to also be having problems with my MDA.
I can install tom-tom just fine, but for some reason it just doesnt recognise my Bluetooth GPS receiver. The receiver brand & model is as per this page:
http://www.qstarz.com/html/products_BT-Q770.htm
I have enabled COM 4 & 5 in the bluetooth settings page and configred tomtom to connect using either com4 or com5 but it just doesnt work.
Any help in solving this problem would be much appreciated!
Many Thanks!

This for all of you who are still having problems...
This is what i did to get my Tomtom working on my T-mobile MDA Compact:
1. uninstall tomtom using add/remove programs.
2. using file explorer deleted the following folders:
\tomtom
\program files\navigator
\program files\contacts navigation
3. Using a registry editor - browse the software sub-folders of HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE and delete any tomtom, tomtom navigator, and/or tomtom gps/ tomtom bluetooth supprt folders.
(in order to avoid steps 1,2,3 you can also perform a hard reset after you have backed up all your data & files)
4. Navigate to HKEY_LOCAL_MACHINE -> DRIVERS -> BUILTIN -> BTINSerial
5. Now change the index key from 4 to 6.
6. Exit the registry editor.
7. Soft reset your MDA.
8. Now install TTN5
9. After following the initial setup prompts of TTN5 exit it.
10. Now install tomtom nav. 5.1 (update available from the tomtom website)
11. Go back into tomtom and select "change preferences"
12. Go into GPS CONFIGURATION
13. Select Other Bluetooth
14. Select COM5
15. Click Done
16. Give tomtom about 10 seconds and your GPS navigation should now work OK!!!!
Hope this helps everyone who is trying to get this to work. I have spent a lot of time trying to find a solution that works and this i feel is it!
Needless to say use this solution at your own risk - all i can say is that its worked for me!

once installed, use this procedure.
http://forum.xda-developers.com/viewtopic.php?t=32267
It works 100%

Re: T-Mobile MDA Compact
unknown01000 said:
Hi Guys
I seem to also be having problems with my MDA.
I can install tom-tom just fine, but for some reason it just doesnt recognise my Bluetooth GPS receiver. The receiver brand & model is as per this page:
http://www.qstarz.com/html/products_BT-Q770.htm
I have enabled COM 4 & 5 in the bluetooth settings page and configred tomtom to connect using either com4 or com5 but it just doesnt work.
Any help in solving this problem would be much appreciated!
Many Thanks!
Click to expand...
Click to collapse
Can you confirm that HKEY_LOCAL_MACHINE -> DRIVERS -> BUILTIN -> BTINSerial is correct - My Vairo didnt have that key...
Plus I seem to be having the same probs as you did but with the Qstarz Q880...
Terran

ttn.CAB won't install despite reset
Tried installing TT5.0 on my Vario, but no luck. Like posted before, it won't install ttn.CAB. I tried:
removing all TT files, also from registry
soft reset,
installing gps.CAB,
remove SD,
soft reset,
then install ttn.CAB
but it still says 'installation failed'. Aaarrrggghhhhh
Any ideas, anyone?

TT5 & BT: procedure to install & make it work

Hi,
I just tested successfully the following procedure:
1) install TT5 using .cab files (transfer to the device & run each one)
2) pair BT unit;
3) configure TT5 using "Other Bluetooth GPS", "max baud rate", "com 0";
4) close TT5;
5) copy the navigator.cfg file (in Programs\Navigator on your device) via Activesync to desktop;
6) open the file with wordpad - DO NOT ALTER anything else but COM0 to COM5;
7) close the file;
7b) save the file modified back to the device;
9) Turn on BT reciever;
10) start TT5, wait a few seconds and...voilà !

Cool
I'm glad to see that someone else has tried it and it works for them too.

thanks Italos !!!

Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!

gogol said:
Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!
Click to expand...
Click to collapse
We are not talking Magician we are talking Wizard
I had it working fine on my Magician, just like you
But I have upgraded to a Wizard and the above
process is what I had to do to get it work on the Wizard

Yeah I know that. We are talking about WIZARD.
That's why I use but ... meaning: it (my tomtom) is working fine with my Magician, but I dont know if it will work with WIZARD.
That's why I ask "What kind of tomtom do you use?" ... Registered? Or CRACKED one (like mine, in my Magician).
darkwarrior said:
gogol said:
Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!
Click to expand...
Click to collapse
We are not talking Magician we are talking Wizard
I had it working fine on my Magician, just like you
But I have upgraded to a Wizard and the above
process is what I had to do to get it work on the Wizard
Click to expand...
Click to collapse

Makes no difference m8 - the problem seems to be "universal"
It should work if you follow those instructions, you have a BTGPS receiver and whatever install of TT5

Hi Guys,
New on this Forum, bought a Qtek 9100 a few days ago.
Have been struggling since to get tomtom 5 to work with my BT GPS, and
I just wanna say big thx to Italos for the instructions, worked like charm.
One thing though, I still got TomTom 5, I tried to install the 5.1 update and ended up in it saying it can´t find any maps...ok so back in version 5 all that was located in the "\My Documents\TomTom\CurrentMap.dat file. SSo I edited that one to point to my map on the storage card.
Fired up TomTom 5.1 again, and still not working, ok then I was not sure I had a real tomtom5 map, so I tried to extract the map from the TomTom5 DVD, well wen´t fine just to extract the cab, but I then ended up with these files.
00000.poi.010
000cline.006
000faces.004
0mapinfo.005
0traffic.009
SCANDI~1.000
SCANDI~1.007
tmccodes.008
I guess it will work if I extrackt these ones and replace those on my card, but how do I go about it?
I have tried with winrar, and that does not work, anyone who knows which program can extract these files?
thx / fahlis

Very quick tomtom question?

Just checked my version of tomtom on my xda and it says 5.00??? is this correct i thought 5.00 would'nt work under WM5?
cheers

ferritt said:
Just checked my version of tomtom on my xda and it says 5.00??? is this correct i thought 5.00 would'nt work under WM5?
cheers
Click to expand...
Click to collapse
I think It would if you have tomtom gps receiver!

It works with a regular bluetooth gps to. Just need to know howto hexedit a file...

MADJID said:
ferritt said:
Just checked my version of tomtom on my xda and it says 5.00??? is this correct i thought 5.00 would'nt work under WM5?
cheers
Click to expand...
Click to collapse
I think It would if you have tomtom gps receiver!
Click to expand...
Click to collapse
? So your saying version 5 will work if I have an original tomtom bluetooth receiver?
ok maybe i'm not fully understanding this? If version 5.00 works on WM5 (my xda mini s) which it does why all the fuss about you must upgrade to 5.21 if you have WM5?
the only eason i ask is because my 5.21 version of tomtom stoped working after a while (dont know why),but when i reinstalled i forgot to update, so at the moment mine says version 5.00 and it's working fine with no problems
cheers

For my knowledge I think because it work already once with tomtom 5.21 some necessary files has been already loaded into the storage card & the device therefore when you reinstall TT v 5.00 it work just fine because you already have the com port existing therefore everything was ok.
To my knowledge when I install the TT 5.00 I cant find the com port for the gps then after I install the update version it appear depend on were you set it.
Hope this help clarify :roll:

MADJID said:
For my knowledge I think because it work already once with tomtom 5.21 some necessary files has been already loaded into the storage card & the device therefore when you reinstall TT v 5.00 it work just fine because you already have the com port existing therefore everything was ok.
To my knowledge when I install the TT 5.00 I cant find the com port for the gps then after I install the update version it appear depend on were you set it.
Hope this help clarify :roll:
Click to expand...
Click to collapse
i get ya mate. Just waiting to get my new BT receiver so i'll give it a good check to see if it will fully work.
cheers

In need of urgent help!
Right i've finally got a BT receiver so i can now use my xda to replace my old ipaq. Thing is I cant get my bt receiver to work with tomtom. Firstly i cant get the gps control panel to appear in settings/connections. I've done the reg edit then soft reset but stil nothing? I've read all the threads i could find but just cant get it to work. Stupid question but do i need to do the reg edit? Could someone please tell me how they installed and got it to work? please!
I have included pic of what my reg edit looks like.
please help
cheers

that looks correct, then when you go into "connections you should have a new icon "GPS"
one thing to check, if you have another regeditor check the same place in the registry
you may find what you are looking at at the moment has not been saved.
may sound silly but you may be viewing something like cache memory.
which editor are you using? (sorry if you have already said)

i'm using PHM regedit. And that pic was after i saved and exited and soft reset. As you can see the reg edit is still there after reset just no gps icon???
If i'm running tomtom 5.21 would i still need to do the edit?
cheers

tomtom5.21 without reg Editor
hi, I give you my steps that I did and it work for me even in the xda exec .
1 first connect your gps with your pda trough Bluetooth accept serial (thick the box)
Then create an outgoing serial port any (free one in my case com6)
2 after you copied the files of tomtom v5.00 into your storage card, in your ppc do file explore and look for a folder Inside your storage card called 2577 open it, (installing cab) ,first click gps then pimaddin then ttn then wzd install them all to your device.
3 now go to the update file 5.21 click on setup follow the screen the you will get a message saying the previous version……… just click ok .after the installation finish
then voila all should be fine just follow the screen you will be asked to enter your activation code again * (if you dont have email me )then setup tt5 as you like for the gps setting you will find the com6 added,simple for tt gps reciver but If you have a third party gps receiver just use the port that you created earlier (outgoing port com6 in my case) .
it should work no need to edit any registry becouse I havent and is working 100% in my mda vario and xda exec.
hope this help :lol:

cheers mate. managed to get it working. Just have probs with my bt receiver now. very poor signal.
cheers

Bluetooth failure

Hi everybody,
I own a HTC P3600 (under the S300+ brand) and despite a lot of attempt to setup a bluetooth connection it seems that the hardware is not recognized at all.
I have the message "there is no bluetooth hardware installed" and each time i check the BT box "activate BT" when i switch back to the activaton tab the option is unchecked. When i try to scan other devices i have an error message "problem with the bluetooth hardware"
I thought i could find a software that could verify the hardware configuration like the one we have on win XP or a driver i could install over the actual configuration but i didnt find anything.
At first the internal GPS didnt work as well but after i flashed the OS with the original OS version + the radio extension V1.48 it now works fine. However i would like to use my external BT GPS (sirf III) which is more accurate and efficient.
I'm really desperate and dont know what to do to activate the BT.
i tried hardware and soft reset, even an OS upgrade (WM6) without results.
If anyone has an idea of what i could do to test the hardware to verify if the BT is dead or if its related to a software problem.

Just one more bump and if nobody has any idea well then i give up..

dijou31 said:
Just one more bump and if nobody has any idea well then i give up..
Click to expand...
Click to collapse
Hello:
I m having the same problem with the bluetooth, i tried to turn on a a message " error bluetooth hardware". Whata did you do to fix your problem.
i apreciate a lot your help.
thanks

i have a i mate no bluetooth
no bluetooth hardware after replacing backup bat tried rom up load no go hard boot any ideas.

I have the same probleme, do you have any idea Please ?

JeremaX said:
I have the same probleme, do you have any idea Please ?
Click to expand...
Click to collapse
Try upgrading/reflashing you Radios.

same problem after a backup restore. Hardware error radio 1.56.70.11

Hi, i've discovered that is a registry problem but i don't know what is the wrong key to repalce it

Bluetooth rSAP working (Skoda, Mercedes, BMW)

Hi guys,
Just connected the HD to a new Columbus radio system using rSAP.
First of all, I am not the one who made the .cab file needed, I simply followed the instructions on this site, and fiddled around a bit:
http://briskoda.net/superb-ii/howto...us-rns510-using-non-compatible-mobile/131709/
Here's what I did to get it working:
1) Download the .cab files from the above mentioned thread
2) Install .net compact framework 3.5
3) Install the BT_sap.cab file, it will say installation failed, but just ignore that..
4) Using file explorer, find "SAP settings" in the windows folder and click it.
5) Go to start => settings => connections => bluetooth and turn on bluetooth and make your device visible.
6) Uncheck the authentication or password box, then check the box that says "remote sim acces"
7) Connect to the radio.
That's all folks
Hope it works for you, please write your findings here.

??
hermman said:
Hi guys,
Just connected the HD to a new Columbus radio system using rSAP.
First of all, I am not the one who made the .cab file needed, I simply followed the instructions on this site, and fiddled around a bit:
http://briskoda.net/superb-ii/howto...us-rns510-using-non-compatible-mobile/131709/
Here's what I did to get it working:
1) Download the .cab files from the above mentioned thread
2) Install .net compact framework 3.5
3) Install the BT_sap.cab file, it will say installation failed, but just ignore that..
4) Using file explorer, find "SAP settings" in the windows folder and click it.
5) Go to start => settings => connections => bluetooth and turn on bluetooth and make your device visible.
6) Uncheck the authentication or password box, then check the box that says "remote sim acces"
7) Connect to the radio.
That's all folks
Hope it works for you, please write your findings here.
Click to expand...
Click to collapse
Question :
What happens to your phone after you leave your car ?
With my diamond, the phone does not login to any network after SAP disconnects , I have to reset the device or turn off/on the phone from the communication manager :-(
Otherwise , it's working fine though
Claude

Garfield1970 said:
Question :
What happens to your phone after you leave your car ?
With my diamond, the phone does not login to any network after SAP disconnects , I have to reset the device or turn off/on the phone from the communication manager :-(
Otherwise , it's working fine though
Claude
Click to expand...
Click to collapse
I've got the same problem. It went away for a while and my phone reconnected normally. But recently I had to soft reset my phone and the trouble has started all over again.
Has anyone resolved this issue? I did manage to get it working earlier (but I don't know how), so there must be a resolution to it.

hermman said:
Hi guys,
Just connected the HD to a new Columbus radio system using rSAP.
First of all, I am not the one who made the .cab file needed, I simply followed the instructions on this site, and fiddled around a bit:
Here's what I did to get it working:
1) Download the .cab files from the above mentioned thread
2) Install .net compact framework 3.5
3) Install the BT_sap.cab file, it will say installation failed, but just ignore that..
4) Using file explorer, find "SAP settings" in the windows folder and click it.
5) Go to start => settings => connections => bluetooth and turn on bluetooth and make your device visible.
6) Uncheck the authentication or password box, then check the box that says "remote sim acces"
7) Connect to the radio.
That's all folks
Hope it works for you, please write your findings here.
Click to expand...
Click to collapse
Link doesnt work for me?

nljuggler said:
I've got the same problem. It went away for a while and my phone reconnected normally. But recently I had to soft reset my phone and the trouble has started all over again.
Has anyone resolved this issue? I did manage to get it working earlier (but I don't know how), so there must be a resolution to it.
Click to expand...
Click to collapse
Same here.I installed an Energy rom and connected the phone to car, after i leave the car, the phone doesnt turns on, just need to soft reset it.
On my Touch Dual, i had installed a BT_SAP.cab file, and worked perfectly, everytime i left the car, the phone turned the network on.
Still no solution to Blackstone ?
regards