s2u2 + save to contacts - HD2 General

I'm having this problem since installing s2u2 :
When screen is locked and i get an incoming call when the call ends i get the option to save to contacts (if the number isnt recognized) but s2u2 immediately locks the screen and after i unlock it the save to contacts screen is gone.
any ideas?

Related

Sense Phonebook shows Contacts And Sim

Hi, when you press phone to open your contacts, you get the Phone contacts AND the Sim contacts, how do you filter just one or the other.?
I like to keep a backup copy of my contacts on the sim, not just the phone, but i now get 2 enetries for each contact?
Go to People tab > All people > Menu > View and choose contacts or sim.
Yeah that i worked out, but when you press the phone button, it still shows phone contacts AND SIM untill you press the all people button????
why???
I don't know why. I never even noticed that.
Not only that it shows all the emails too, i also deleted them all, and 10 mins later they are back??
Weird phone man...
yes. same problem here.
I select to filter sim contacts. close it. even restart but it still shows both sim contacts and phone contacts.
thanks.
is only way keeping sim card empty?
any ideas?
Use a registry editor and do this tweak:
Code:
HKCU\ControlPanel\Phone\ShowSIM = 0 (DWORD; default is 1)
That hides the SIM contacts in the dialer only. They still show up in e-mail and sms screens, but at least it's not in the dialer any more!
that works.
thank you.

Conference number in calendar events

Did anyone find out how to use conference dialing numbers with passcodes in calendar events?
Acording to the manual and and new WM6.5 options it is possible to have the phone dial a conference and enter the password if you put it in the body of a calendar event.
For some reason it does not work for me.
If I put in a number like 555-12345p11111# the HD2 breaks it up and shows/dials only 555-12345 if I press the green button on a reminder.
Did you find out how to do this? I have some reminders where it shows up, others where it doesn't, and can't figure out what's what.
Ta

Issues after upgrade?

Dear friends,
I've got the X2 for 1 month, and updated to MR2 as soon as i got the phone. Been happy with the quicker response, and rarely freeze. But after upgrade i found flaws that make me dissapointed :
1. In the middle of conversation, usually i have shortcut to Notes, so i can make notes while talking. Now the button is gone, replaced by much less useful dialpad. More strange, now there are 2 identical "end call" button : one is big , in the center of panel, one is small at the bottom of the screen. This is ridiculous. The only way i can get to Notes is to press Windows logo, go to main menu, scroll to Notes and press the icon. Thats way too long.
2. In the contact menu, i can only register 1 mobile number, 2 work numbers and 2 home numbers. So if the contact has 2 mobile number, only 1 can be assigned as Mobile Number, the other must go to Work or Home. The problem : if we open the contact, the only option to send SMS is to Mobile Number, not from work or home, despite it is really a cellular number. Apparently the software think the Work and Home number as a landline number. This is stupid. The only way to send SMS to work/home number is go to message menu, and press "add recipient", and so on. Why can't they make it from contact menu??
3. If i got a calling from unknown number (not from a Contact), usually i want to save the new number as a new contact or add to exsting contact. But i cannot do the second thing. I go to call history, choose the number, press the menu key, and all i get is "add to contacts", and it only allow me to save the number as new contact, but cannot add to existing contact. very annoying! i have to write it down in the paper, just like old days
I don't know if the above flaws happen because of the upgrade, or this is the new Windows 6.5.3 habit?? My old Ipaq 912 with Windows 6.1 can do all the above mentioned.
I feel very dissapointed...hope you guys can give me feedback?
Thanks for reading
1. Notes when calling is not in the menu anymore, I'm not sure if it's every WM 6.5.3 device. You have to go through main menu.
2. Adding contact works great when you enable the prompt asking you to add the number to your contacts after finishing conversation. In this case you're able to also add it to existing one.
3. Every WM, also 6.1 supports only 1 mobile number.
However when you create sms from your messaging, you can send the sms to ANY number you want.
Thanks - and tips for LED problem
Thanks, appreciate your input. I have enabled the option to add number after conversation.
I personally think the Notes in calling mode, very useful. I have seen it in every new WM phones, including HTC and Samsung. Its pity they removed it on X2.
One more thing, about LED notification problem (which dont work when the phone enter standby mode /black screen), and the phone will not wake up when received SMS. I have simple solution, but there are sacrifices to made. here's how :
1. Disable the Auto Lock
2. In the backlight & power management menu, in the field "turn off backlight after....", fill 30 seconds or 1 minute, to save battery
in the field "turn off screen if not used for..." choose "never"
3. Dont' forget to set the illumination for SMS/MMS received as "no limit"; in the "sound and notification" menu.
4. (optional) Enable auto adjust backlight in the backlight & power management
Basically, we prebvent the phone to enter standy mode at all. This will reduce the battery life about 20%, but you will never miss a sms. Any sms will wake up the phone, the SMS sound will ring, the LED will light until you read the SMS.
Also, because the standby mode is connected to auto-lock, you cannot auto-lock the phone, that means you have to lock it manually everytime you finish use the phone. You can lock quicky by using SPB Shell, and create Lock shortcut in the front panel. Or in any mode, press "windows" logo on the left bottom, then you can see the lock button on the bottom screen.
Cheers!
Personally I've never had a problem with smses.
My previous OS never showed anything besides the icon and sound alert for sms. I never liked my sms appearing on the homescreen.
Current behaviour is that it plays a sound and doesn't wake the device up. So it doesn't activate in the pocket.
You just wake the device and see the sms icon anyway so missing sms is not such a case.
If you set the sms sound as a quite short file, it will always play a sound.
At least it does in my case.

[Q] Active phone call is muted automatically when opening browsing contacts

Hi,
While making a phone call, the mute is enabled automatically when I press the 'add' button (right button) which shows me the contacts list.
I want to be able to see contacts information and read them to the person I'm talking with.
Any ideas?
Eran

Answering phone calss

Doesn't matter how I set my phone up I can't seem to answer calls
It rings and if I lift it up the lock screen appears but it doesn't show an incoming call.I unlock it expecting it to go to incoming call screen and it doesn't it shows the home screen.If I then select the dialer it goes to call history not incoming screen .Tbe incoming call only rings about 4 times before ending so By the time I have done this the caller has rang off ,am I missing something really simple
Thanks for any help
I think this happens when your default app configuration has no dialer selected. touch settings->apps->Default/Standard apps->dialer
take also a look at the permissions screen of the dialer app

Categories

Resources