I installed SK tools and clicked Optimize. All of a sudden the SD Card cannot be detected. The card is still working, as I tested it on my pc with a card reader. SK tools must have screwed up some settings.
Anyone has got any idea?
Hard Reset solved the issue
Related
I have a prophet with a 2gb sandisk SD card. I did the ROM upgrade a week or so ago and everything was working fine.
Today I went to run an app from the SD card and got an error that the app couldn't be found. When I explore the card with Resco or file explorer, I don't see any of the files on the card. When I look at the memory usage however, it would indicate that the file are still there (only 800mb free indicated).
I've tried a few soft resets with the card out and then with the card inserted with no luck.
Any ideas short of reinstalling everything back on the card?
HOW ABOUT RUNING A DISK CHECK IN YOU PC TO FIX ERRORS OR USE POCKET MECHANIC ON YOUR DEVICE http://www.pocketgear.com/software_detail.asp?associateid=373&id=12178
YOU WILL FIND THAT WILL FIX YOUR PROBLEM.
Hello! Although this is my first post on the forums, I have been reading extensively through these forums for the past ferw weeks since my acquisition of my new to me MDA (i.e wizard G3). Yesterday, I took out the sd card for a few hours and now when I put the card back in the wizard is not recognizing the sd card in the file explorer. I put the card in the PC and it is recognized fine there. I reformatted the sd card via FAT and inserted it back into the wizard but no luck. I soft reset the phone several times but in vain. I then eventually hard reset the wizard and THEN inserted the sd card but still not read. I tried going through the My computer--> Manage --> Disk Management but the sd card is not showing up on it.
The sd card is clicking in and out fine from the wizard. Any help would be greatly appreciated. All my medical programs were on the SD card. And with that many programs I cant just work off of the memory.
Thanks in advance
Sohaib
update
I installed the wm5storage and the program does not recognize the sd card either
Update
-Tried formatting to FAT with computer and re inserting did not work
-Tried Formatting with WM5storage and THAT didnt work either
-CID unlocked the phone, installed 3.08 ROM, and then "Crossbow reloaded" with 2,19 UK Radio Rom, tried inserting the sd card and still not work
-Tried formatting with "Flash Format" and the program says "no storage card detected"
I am thinking that I may have damaged the pins or something when I was reinserting the SD card, initially when I noticed the problem
2 options in front of me now!
1. buy another mini SD card and see if that works
2. Open up the Wizard to see if it is a hardware issue
Opinions etc would be greatly appreciated
thanks
sohaib
Ive got the same problem with my Qtek 9100
hi i had a near identical problem occur with my xda mini, as in after removing and reinserting my sd card it was not being recognized. i happened to have a old mini sd card (only 64mb tho!) and that was recognized. so i just bought another 2gb sd and its been fine ever since, but saying that i have not removed it from my mini yet! which is getting a little annoying now as i was given a copilot kit and the software is on a mini sd card
Try removing all formatting and then allow the phone to format your card. I had a problem with my second MiniSD card after formatting on my PC.
Insert your card into your card reader. Right click "My Computer" and click on "Manage". Then left click "Disk Management", find your card and delete the partition. At this point, you can then stick the card into the phone and it will ask if you would like to format the card. Even though the computer will not recognize the card, your phone will.
Snapin Disabled
I tried the approach of right click my computer--> manage --> disk management --> but it tells me that the snappin is disabled and when I go into start--> run--> gpedit.msc --> to enable the disk management it still does not recognize my storage card in the disk management. Hence I am unable to remove the partition.
Thanks for the replies guys, any suggestions on how to enable the specific snapin on XP?
Thanks
Sohaib
New Mini SD Card
OK, so in attempts to diagnose the problem, I went out today and purchased another 1gb minisd card, inserted it into the wizard and................NOTHING. Still no luck. Does this narrow down to the problem to a hardware pin related issue? Or could this still be a software problem. I figured that a new sd card may resolve the issue but unfortunately not, any suggestions would be greatly appreciated.
Thanks
Sohaib
Bump
Ideas? Suggestions? Recommendations?
Thanks in advance
Sohaib
If you tried another card and a new ROM, I would say it is a hardware issue, if it's still under warrantee then I would send it in. If it's not and you want to try to fix it yourself, there is the HTC wizard maintenance manual (Google search) that will give you step by step instructions on how to disassemble it. Or sell it on eBay then use the money to buy a new one.
Hi,
I've had a 1GB SD card in my wizard for months with no problems at all. I had some software installed on the card and the other day I wanted to free up some space so I uninstalled the apps that were on the card (SPB time, SPB shell and Brain school)...Since then, my phone does not recognise the SD card. There are no errors or anything it just doesn't register that the card is there. I've done a factory reset but this has not helped.
I'm running WM5 with a moleski updated ROM that has been on the phone probably a year or so
Any ideas?
I guess the card must be knackered, I tried it in my camera and the camera wouldn't work either. weird how just removing software could kill the SD card...
Run the card in a card reader on a computer. There, you should be able to do a long format/bad sector search. This will tell you once and for all if it's dead. It's the only way to be sure.
i have exactly the same problem and its happened twice now. the data is fine on the card just wm5 doesnt recognise its existence any more... if you wipe your phone and start again it pops back to life
I've tried a factory reset (hold the four buttons then press send) but this hasn't fixed the problem....I need to buy a card reader I guess to check for sure
Hello everybody, I'm new here and I'm having a strange problem with my Hermes.
Sometime ago I downloaded the slide2unlock cab and installed it. Then I removed it for some reason. Last week I inserted my sd in the computer and it asked me to format the card. There was no way to get into the sd and I lost all my data.
Now, after having formatted my sd, the device is continually hanging and when I put it in standby it always turns on automatically. Most of the times it also doesn't recognize the sd card and I have to reboot.
Can anyone help me, please?
Did you reformat the sd card FAT32? Its the preferred format but they seem to come formatted FAT by default.
Check to see if the sd card is still being detected by the PC, if it isn't then its time to get a new sd card.
Had you installed any apps on the sd card that might be causing problems.
Not from the sd card but I have had apps that, though I'd installed to the sd card, had installed the exe file onto my Hermes and a heap of data files onto the card.
Otherwise, might be time for a Hard reset...
Tanks for the fast answer. The sd card is formatted to FAT (not FAT32) and now is working in the computer.
Regarding programs installed in the sd, the problem could be exactly the slide2unlock, but I've removed it sometimes ago.
Only other thing to do wopuld be to do a hard reset. !st backup up your contacts to the sd card with spb backup(has a demo of 5 backup/re-installs). Needs to registered but you can at least backup contacts and messages then re-install after HR.
Hard reset should fix all your problems.
Cheers...
Hi,
My Sandisk Ultra 32GB microsd card is not getting mounted on my Moto X Play from yesterday on. It was working perfectly before that.
Problem in Detail: Yesterday when i tried to play some music only I realized that its not getting mounted. I tried removing the card and reinserting it. But it's not showing up any notification. When I went to 'Storage and USB' settings suddenly after reboot, its showing 'Unsupported' for a minute and is getting unmounted automatically.
Possible Cause: One of my friend connected my phone with USB cable to his laptop day before yesterday for transferring data. I dunno exactly whether its infected or he didn't eject it properly.
What all I Tried: Initially, I tried connecting it to my laptop using Card Reader. Fortunately, everything was fine inside the system. The file system FAT32, all the data it had, and no memory was unallocated. Afterwards I did a quick format and a complete format as well, with file system FAT32. Both didn't help anyway. Then I installed mini tool partition wizard. But haven't done anything with that yet.
Kindly help me with this ASAP.
Can you use your SD card with the phone ?I have the same problem - my sd card is not recognized by my MXP. There was some speculation that the SD card slot is not working properly or just damaged however all SD cards I have are working fine just nor with my phone.As of today there seems to be no fix to this bug.
Chaotick said:
Can you use your SD card with the phone ?I have the same problem - my sd card is not recognized by my MXP. There was some speculation that the SD card slot is not working properly or just damaged however all SD cards I have are working fine just nor with my phone.As of today there seems to be no fix to this bug.
Click to expand...
Click to collapse
I have tried this SD card in my friend's phone and it is working fine.
Afterwards, tried formatting the card from that phone, my laptop, (quick & complete with different names) and the tool "sd card formatter" (erased everytihng).
I even tried a factory reset of my phone.
Nothing helps. Really frustrated
try the slow format sd card option from pc...