Database Users

Streaming over internet.

Is it possible to access my files / shares over the internet ? Whats the best program to use ? Are there any programs like RealVNC that offer file access options as well as remote control options ? If preferable something with a password that I can save on my wizard so I dont have to keep typing it in all the time.
I have wifi at work so want to be able to access my files that are at home while I am in work like my mp3's. Would they stream ok ?

I think you can stream your mp3s to your wizard if you run slimserver from slimdevices on your home pc and a client on your wizard (though I haven't tried it myself) - take a look at the forums on their website.
Chris

Actually is it streaming ? I just want access to my files, is that one in the same thing ?

Sorry, this is an app which (in effect) enables you to stream (ie play) a music file on your home pc (running slimserver) and listen to it remotely on a client device (e.g. your pda). It doesn't allow you to pick up the music file itself over the internet.
Chris

I can access the shares on my home PC over WiFI using Total Commander but I cant seem to play music directly. I have to copy it across first. It gives a funny error message in WMP if I try to stream it. I will post the error message later.

knowsleyroader said:
Is it possible to access my files / shares over the internet ? Whats the best program to use ? Are there any programs like RealVNC that offer file access options as well as remote control options ? If preferable something with a password that I can save on my wizard so I dont have to keep typing it in all the time.
I have wifi at work so want to be able to access my files that are at home while I am in work like my mp3's. Would they stream ok ?
Click to expand...
Click to collapse
You would need a Static IP address on your Home broadband connection to do this, not many home broadband packages give you a static IP just a dynamic address that changes at whim.
Presuming you have a static IP you could then get yourself a DAMN good firewall and install Microsoft IIS on your PC to make it a webserver, then get yourself a domain name and point it at your PC. (slightly simplified example above there, but I'm sure you get the drift)
There are probably apps around to do this much sipler but you'd need to google for them. pretty sure that there is a specific version of VNC and PC anywhere that will do what you want

knowsleyroader said:
Is it possible to access my files / shares over the internet ? Whats the best program to use ? Are there any programs like RealVNC that offer file access options as well as remote control options ? If preferable something with a password that I can save on my wizard so I dont have to keep typing it in all the time.
I have wifi at work so want to be able to access my files that are at home while I am in work like my mp3's. Would they stream ok ?
Click to expand...
Click to collapse
You would need a Static IP address on your Home broadband connection to do this, not many home broadband packages give you a static IP just a dynamic address that changes at whim.
Presuming you have a static IP you could then get yourself a DAMN good firewall and install Microsoft IIS on your PC to make it a webserver, then get yourself a domain name and point it at your PC. (slightly simplified example above there, but I'm sure you get the drift)
There are probably apps around to do this much sipler but you'd need to google for them. pretty sure that there is a specific version of VNC and PC anywhere that will do what you want

wilesd said:
knowsleyroader said:
Is it possible to access my files / shares over the internet ? Whats the best program to use ? Are there any programs like RealVNC that offer file access options as well as remote control options ? If preferable something with a password that I can save on my wizard so I dont have to keep typing it in all the time.
I have wifi at work so want to be able to access my files that are at home while I am in work like my mp3's. Would they stream ok ?
Click to expand...
Click to collapse
You would need a Static IP address on your Home broadband connection to do this, not many home broadband packages give you a static IP just a dynamic address that changes at whim.
Presuming you have a static IP you could then get yourself a DAMN good firewall and install Microsoft IIS on your PC to make it a webserver, then get yourself a domain name and point it at your PC. (slightly simplified example above there, but I'm sure you get the drift)
There are probably apps around to do this much sipler but you'd need to google for them. pretty sure that there is a specific version of VNC and PC anywhere that will do what you want
Click to expand...
Click to collapse
Well I could always just take a note of my pc ip address and as my pc is on a lot of the time it can remain the same for some time. Yeah I thought VNC could do something like that but there doesnt seem to be any option for it.

Static IP, pah!
www.dyndns.org (or many others) give your dynamic IP a static DNS name eg yourname.dyndns.org and then all you need to do is:
1) Manually update your IP
OR
2) Configure your router to update you IP (available on some routers)
OR
3) Get some software to update your IP (lots available, use google)
Now your home network has a static name to access it for any purpose - just change the port on the end
I have web on 80, ftp on 21 and a socks proxy all running - just need to forward the ports on the router

You need ORB!
I use it and can acces all my photo's, MP3's and even movies that are on my home-pc streaming over internet. It works even with GPRS, but with WIFI it works really great.
See www.orb.com

rmg said:
I can access the shares on my home PC over WiFI using Total Commander but I cant seem to play music directly. I have to copy it across first. It gives a funny error message in WMP if I try to stream it. I will post the error message later.
Click to expand...
Click to collapse
I get the same; use TCPMP and it works fine

N!co said:
You need ORB!
I use it and can acces all my photo's, MP3's and even movies that are on my home-pc streaming over internet. It works even with GPRS, but with WIFI it works really great.
See www.orb.com
Click to expand...
Click to collapse
Isnt there some way of doing it with resco and your ip address ? maybe opening a really obscure port on the router and firewall ? Not sure how those companies work but im a little concerned about my data going through their servers which I presume it is ?
Would just be so much simpler if there was some way of doing it with resco like I do on my home wifi.

HELP GUYS

Hi forum,
I have a WiFi Connection in my office premisis & was womdering if I could create a VPN or a similar p2p connection between my laptop & my universal...
Any comments or ideas..
Thanx,
mOrph

yes you can
but not an activesync connection.
you basically have to get on the WIFI network (VPN not necessary unless you are external of the network and/or behind firewalls).
then its a question of what you want to do, the WIFI network gets you on to it using WEP or WPA SPK I think (we use WEP at home and work).
if you want to connect to your laptop, create a mapped drive then you can copy and paste backwards and forwards.
you can run terminal server to control your PC or connnect to a terminal server, or connect to SBS with administrator priverlidges.
The question is, if you connected, what do you want to do. You cannot activesync, but you might like to try streaming music or other bandwidth consuming activities...

ok
got your PM.
Question: If you created the connection using WIFI between your laptop and your PDA, what do you want to do/achieve?

PS morphosin
Please please please stop using "help guys" as your heading. Refer here: http://forum.xda-developers.com/viewtopic.php?t=4534
Particularly point 2.
This is at the beginning of every forum topic.

Hi
Answer:
Hi Simon... The reason i was wanting to connect my laptop & my ppc through Wifi is that i cannot activesync (like you already know).
I was thinking maybe i can have a data trasfer between the devices if nothing else.
Is that possible?
If not, what can the connection be used for?
Thanx buddy,
mOrph

Activesync cannt be done over WIFI, 2003 allowed it not WM2005.
You can share a folder on your PC, and thus place files in and out of that using WIFI. Generally though, I found it more efficient to use an SD card with a USB memory reader to transfer files, much quicker read/write. Usually I want to put pictures or videos back the other way anyway. some pc's and laptops come with memory card readers anyway.
ON your PC' find a folder, right mouse click and share it with a share name. Make sure you know the name of the machine, eg my computers name is TLA-DELL1 for work, and home is the name of my daughter. If you havent named your machine it will have some dodgy obscure pathetic name issued by the manufacturer. You can get this from system in control panel.
On your PDA, start your WIFI.
Using Resco explorer hopefully you have it, map a net work drive. You can try the standard file explorer, but I dont like it. Total commander can also do it. In the share address use:
\\computername\foldersharename
note the double backslash.
Enter usernames and passwords as appropriate.
Now, the pain in the arse bit.... do you have a firewall? This is where it can get tricky.
The other thing you can do is if you are running XP Pro (if not, I recommend it), you can also go into control panel > system on the tab called remote connection, you can tick a box that allows you to take control and use your machine on your PDA using Terminal Server. This allows you to access all the resources and facilities that your machine has as if you were sitting at the console, including the power and processing speed of your computer.
Only downside, the screen is much much smaller than your computer, so getting around it can be painful.
Once you have enabled your machine to allow the connection, its simply a matter of starting wifi, programs > terminal services, and enter the IP address or computer name of your laptop to connect to it, and it should open then a log on name for you to start using your machine.
A further feature, which I dont use and cannot advise how to, but read about it here, is to "stream" mp3's from your laptop to your PDA so you can play music on your PDA based upon music on your machine rather than having to copy it.
In relation to sending files to your computer, if all else fails, I ahve two extra email accounts on my PDA a hotmail account, a POP3 account, and if in times of need, a GMAIL account, all of which allow me to email particular files anywhere I want using any WIFI connection. I use this when all else fails.....
Hence my question, what did you want it for....
Dont worry mate, we'll get there... one day. We just have to challenge MS, and what is life without a challenge or 100 from MS.

Wifi and what to do wif it

can you use wifi to send files like bluetooth or can u browse other wifi cable phones or pc file system or hard drive what can you do with two wifi fonez can you lyk ad hoc the 127.0.0.1 to share filez or something like that

defcomg said:
can you use wifi to send files like bluetooth or can u browse other wifi cable phones or pc file system or hard drive what can you do with two wifi fonez can you lyk ad hoc the 127.0.0.1 to share filez or something like that
Click to expand...
Click to collapse
I have tried accessing my networked PCs and it works if you use Resco Explorer. Couldn't get it to work with the standad File Explorer.

There is almost nothing you can do with two WiFi phones.
You can connect them with ad-hoc network but Windows Mobile does not have the server components for file sharing.
I use Total commander to access files on my PC and even controlled it with remote desktop.
I had no problem accessing shared files on network with the built in explorer but it worked a lot slower then TC. Some kind of delay in the protocol or something.

How The Heck Do U DO That ConnecTin Via Wifi
CAn U Explain How To Get Resco Explorer Or Total Commander Since I have Never You Used Wifi Before I Can Pick Up Wifi signals From Nokia Devuces All Over And at My School Theres Some Sort OF signal Coming From the Offices and my fone picks the up 3 diffrent ones but when i press connect nothing happens can You Tell Me how i can Connect it to access files on a pc when the 2.0GHZ Signal Is Unencrypted I Went To Resco Explorer But theres No Wifi Options anywhere and This One Company said its Creating a applications to allow file transfer via wifi checkHERE! i Dont Know how thats possible can u connect to lets say a psp or Nentendo DS Or Iphonw or any Wifi enabled Device. Whats The Difference Between wiMAX and wifi coz they both use 2.0ghz? Wha does WIFI Stand For It Cannot Be Wireless Local Area Network (WLAN). Tankz Yall

defcomg said:
CAn U Explain How To Get Resco Explorer Or Total Commander Since I have Never You Used Wifi Before I Can Pick Up Wifi signals From Nokia Devuces All Over And at My School Theres Some Sort OF signal Coming From the Offices and my fone picks the up 3 diffrent ones but when i press connect nothing happens can You Tell Me how i can Connect it to access files on a pc when the 2.0GHZ Signal Is Unencrypted I Went To Resco Explorer But theres No Wifi Options anywhere and This One Company said its Creating a applications to allow file transfer via wifi checkHERE! i Dont Know how thats possible can u connect to lets say a psp or Nentendo DS Or Iphonw or any Wifi enabled Device. Whats The Difference Between wiMAX and wifi coz they both use 2.0ghz? Wha does WIFI Stand For It Cannot Be Wireless Local Area Network (WLAN). Tankz Yall
Click to expand...
Click to collapse
Wow thats a lot of questions!
Ok, in order:
1) Just because you see a WiFi signal does not mean you can connect to its source!
It could be another device (mobile / laptop / PC) that does not allow you to connect to it.
The network could be secure so you need a key.
The network could show as "unsecure" but use MAC (thats hardware address) filter so only authorized devices can connect to it.
2) If you managed to establish a connection, it does not mean you can access anything!
To transfer files from PC to Mobile using total commander you need the HD/partition/folder where the files reside to be shared and have the rights to access that share. (On windows PC you can right click a disk or folder and select 'file sharing'). Than you just access a network folder. In total commander for example, you click on the '\\' (top in the file list) then 'LAN', then enter a network path and password if needed.
To serf the internet the network you are connected to must be connected to the internet and allow computers on it access. You may need to manually enter gateway or proxy settings for that network.
3) I did not see any WiFi related tool in the link you provided. In any case it all depends on what software is on the device you are trying to connect to. If there is a server for sharing files (like on PC running win XP) than you can transfer files or you may need a special server program for that device.
4) WiFi stands for Wireless Fidelity - that means the connection is reliable and unlike with analog radio signal which you might here distorted if the reception is not good your data will get through correctly or not at all.
5) WiMax does not work on the same frequency range as WiFi and it is designed for much higher data transfer rates.
You can read all about it here.

Thanks levenum I UndersTand
levenum said:
Wow thats a lot of questions!
Ok, in order:
1) Just because you see a WiFi signal does not mean you can connect to its source!
It could be another device (mobile / laptop / PC) that does not allow you to connect to it.
The network could be secure so you need a key.
The network could show as "unsecure" but use MAC (thats hardware address) filter so only authorized devices can connect to it.
2) If you managed to establish a connection, it does not mean you can access anything!
To transfer files from PC to Mobile using total commander you need the HD/partition/folder where the files reside to be shared and have the rights to access that share. (On windows PC you can right click a disk or folder and select 'file sharing'). Than you just access a network folder. In total commander for example, you click on the '\\' (top in the file list) then 'LAN', then enter a network path and password if needed.
To serf the internet the network you are connected to must be connected to the internet and allow computers on it access. You may need to manually enter gateway or proxy settings for that network.
3) I did not see any WiFi related tool in the link you provided. In any case it all depends on what software is on the device you are trying to connect to. If there is a server for sharing files (like on PC running win XP) than you can transfer files or you may need a special server program for that device.
4) WiFi stands for Wireless Fidelity - that means the connection is reliable and unlike with analog radio signal which you might here distorted if the reception is not good your data will get through correctly or not at all.
5) WiMax does not work on the same frequency range as WiFi and it is designed for much higher data transfer rates.
You can read all about it here.
Click to expand...
Click to collapse
Thank you For Replying i now understand how wi-fi works by the way here is the link for that wifi Utility, its called AirShare on the site it says Wi-Fi support Coming soon check Over Here here

Hi, can anyone please explain how to connect winmobile to another winmobile via wifi for file sharing.........? do i need to install any smb client on both mobile.....will it work

Please read post #3 up here...

Wifi hack
Can anyone tell how to hack wifi password... i find a lot of secured networks in my locality... i'm using HTC touch viva...

winxda said:
Can anyone tell how to hack wifi password... i find a lot of secured networks in my locality... i'm using HTC touch viva...
Click to expand...
Click to collapse
That's called theft and illegal intrusion of a computer network. People go to prison for that.

Yes it is very much possible.
Hi guys,
I am extreamly happy to say that i have been able to share files from one windows mobile to another windows mobile that too at the speed of up 450kbps.
i had been trying to do this for atleast 2.5 months with no luck(u may check the related topics, nobody had a idea, Even using xda, google, bing, yahoo, altavista found that nobody has done it before...) but yesterday i made it to work the way i wanted to.
All you need to do is create a adhoc connection(e.g P2P) and download FTP server (Yes your mobile will act as a FTP server) and FTP client.
For FTP server download mochasoft and for FTP Client download resco.
**Once you install resco 2008, go to menu-->options-->addins--> then download ftp plugging(and it will make resco to work as a ftp client)
Mobile A
Start--->settings-->connections-->add new ->name it p2p-->select the option "this is a device-to-device connection(adhoc)...once it is done, turn on wifi on Mobile B it will detect this connections, connect to it.....Now two mobiles are connected with each other via wifi(Without router).....Till this point you can find it in google.
Now to share files open mocha soft on Mobile A(It will show that it is "online" with a specific IP address(Note down this ip address), Anonymous login will be on but preferabaly create a user name (File--->settings--> Add[*give it a read/write permission]) and the password.
Then decide for yourself what exactly you wanna share with the other mobile, in this example i am going to share my SD CARD. Go to file -->settings--> other--> and in the "Login Folder:" put in "\\storage card"
Once that's done open up resco ftp on Mobile B. Go to My ftp locations-->New ftp session--Give a name to ftp session (like abcd), In the host type in the ip address address that you noted down earlier--> let the port 21-->Login:ut in the username that you created-->Password: put in the password
and Hey there you go!!!, you will have the Sd Card of Mobile A and you will be working on it as if it is in your own

....Cont...
On mobile A moccha will notify you that a user has logged on to your server. You can use all FTP commands on mochasoft.
I downloaded the 700Mb movie which was stored in my frnds mobile while we were having beer and it got downloaded at the speed of 450kbps(it started off with 350kbps and was fluctuating from 380 to 450kbps), Just before doing this i tried to copy a 10mb file using bluetooth and resco showed the speed 20kbps........
So next time when you go out to meet your frnds you can transfer all their stuff at the lightning speed via WIFI file sharing......
Good Luck!!

How to browse the internet using Wi-Fi?

File Sharing over a Network

Does anybody how i could access my Pocket PC from my PC over the network. I could do it vice versa through Resco but i can't do Pocket PC from PC nor Pocket PC to Pocket PC. Any ideas? I would like it to happen just how the PC does it, with no major add-ons. I don't want to have to deal with VNC, FTP, etc. So if you know, i'd really like to know the answer. Thanks

I was looking for the same thing and haven't been able to find anything.
(I know you said u didn't want to use FTP)
So far the only thing I have been able to find for this is an FTP solution.
http://forum.xda-developers.com/showthread.php?t=351882
I can access the local network from the phone, but apparently there is no SMB server available for Wm6

Why can't you just use the explorer function of ActiveSync?

Jadel said:
Why can't you just use the explorer function of ActiveSync?
Click to expand...
Click to collapse
There are multiple reasons for wanting to access your device from the network. I myself am using multiple machines and would like to drag and drop files from my phone without having to get a bluetooth dongle and install active sync on every one of those machines.
If anyone has setup a smb server for wm6 i'd love to know, also if anyone has any other recommendations for a good ftp server that mocha one doesn't run in the background properly and the bottom toolbar for it stays on my today screen.

Not exactly what you're after, but I've seen a web server for WinMo around somewhere...
Or maybe something along the lines of a VNC client?

Yea, there are reasons for the networking thing. I have several devices on the network and i would life to get a NAS device. I don't want to go to the trouble of setting up ftp/vnc. Mapping the device using Resco works GREAT. For some reason, my laptop can't find my Tilt when i search for devices on the network and i was thinking maybe it was because it didn't have the same workgroup name?

useful for sure
Assuming you're on the LAN with WiFi, what happens when you port-scan your device's IP?

Not sure what you mean by port-scan but when i go to file explorer on my laptop and type \\ip of tilt, it gives me some error. I'm really trying to look into this and most advice is using vnc and another program which i don't want.

kareem9nba said:
Not sure what you mean by port-scan but when i go to file explorer on my laptop and type \\ip of tilt, it gives me some error. I'm really trying to look into this and most advice is using vnc and another program which i don't want.
Click to expand...
Click to collapse
I don't think you're understanding when i said wm6 doesn't have a SMB server running.
Basically, it isn't running the microsoft networking services to access the file shares. You wont get it to work unless you get some sort of SMB daemon(server) for the phone, which to my knowledge doesn't exist.
look up SMB in wikipedia and u will understand what im talking about.

If using Resco to map shares, will you be able to play media (music, movies) over the wlan then, or will it not be fast enough?
I'm assuming that mediaplayer in wm6 won't have a problem playing from shares...or am I wrong?
/Pilot1

I kind of got this resolved. Not the way i really wanted it, but now i use Pocket Controller Enterprise and it does this. Really nice features, i could connect to anybody in the world, just need their host name.

Doesn't the desktop version of total commander do this? The only problem is the desktop version isn't free...

File transfer using WiFi (WLAN) - is it possible??

Hi everyone.
After searching through the forums, I couldn't get any satisfactory answer.
1) I have THD and Elfin - both WM devices. My question here is, how can I transfer files ( like Fotos, M$ office Documents, Music etc. ) using WiFi or to be precise WLAN? I do not wish to use Wireless internet to send files....I mean to say, without using any thrid wireless device, how can I enable file sharing between these two devices??
I have checked out Resco file explorer and Total Commander. None of them provide option of FTP over WLAN/WiFi.
2) Similarly, how can I transfer files between my WiFi enabled Laptop and THD/Elfin???
Is there any setting to be changed in existing devices, any 3rd party application?? or is it a call for Developers?
Big Thanks Ahead.

ash3012 said:
Hi everyone.
After searching through the forums, I couldn't get any satisfactory answer.
1) I have THD and Elfin - both WM devices. My question here is, how can I transfer files ( like Fotos, M$ office Documents, Music etc. ) using WiFi or to be precise WLAN? I do not wish to use Wireless internet to send files....I mean to say, without using any thrid wireless device, how can I enable file sharing between these two devices??
I have checked out Resco file explorer and Total Commander. None of them provide option of FTP over WLAN/WiFi.
2) Similarly, how can I transfer files between my WiFi enabled Laptop and THD/Elfin???
Is there any setting to be changed in existing devices, any 3rd party application?? or is it a call for Developers?
Big Thanks Ahead.
Click to expand...
Click to collapse
Here: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6825

I preffer FTP protocol as there are many clients on Windows/Linux. On my blackstone I use Mocha FTP Server (freeware). Total Commander CE does support FTP (only as a client). Transfer rates are rather slow.

tnyynt said:
Here: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6825
Click to expand...
Click to collapse
Thanks Guys....that was really quick. Just 1 question though - does this method solves my first problem - file sharing between two WM6/6.1 devices using WiFi ???
Thanks Again.

ash3012 said:
Thanks Guys....that was really quick. Just 1 question though - does this method solves my first problem - file sharing between two WM6/6.1 devices using WiFi ???
Thanks Again.
Click to expand...
Click to collapse
Well yeah, you can browse to a network share with e.g. Total Commander. So it should work once set up properly. Going to try this myself!!

Pardon me if I'm asking for too much.....can we have something like VoIP or to be precise, a radio communicator using such 'WiFi/WLAN between 2 WM devices'? It will be fun to communicate with friends in a 'trucker' style within WiFi range - 10-4 ?

tnyynt said:
Here: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6825
Click to expand...
Click to collapse
Dude this one dosent seems to be working with WM 6 (for my Elfin) [at least the link says so ] Can you please confirm?
Thanks ahead

True... I cannot install it on my blackstone...

Yes you can....I have installed it on my Blackstone and me Elfin too (after upgrading Elfin to 6.1). And it works.
However, I am still not able to transfer files (using WLAN) between my Elfin and blackstone. Any ideas on that??
Thanks Ahead

Hi guys,
I am extreamly happy to say that i have been able to share files from one windows mobile to another windows mobile that too at the speed of up 450kbps.
i had been trying to do this for atleast 2.5 months with no luck(u may check the related topics, nobody had a idea, Even using xda, google, bing, yahoo, altavista found that nobody has done it before...) but yesterday i made it to work the way i wanted to.
All you need to do is create a adhoc connection(e.g P2P) and download FTP server (Yes your mobile will act as a FTP server) and FTP client.
For FTP server download mochasoft and for FTP Client download resco.
**Once you install resco 2008, go to menu-->options-->addins--> then download ftp plugging(and it will make resco to work as a ftp client)
Mobile A
Start--->settings-->connections-->add new ->name it p2p-->select the option "this is a device-to-device connection(adhoc)...once it is done, turn on wifi on Mobile B it will detect this connections, connect to it.....Now two mobiles are connected with each other via wifi(Without router).....Till this point you can find it in google.
Now to share files open mocha soft on Mobile A(It will show that it is "online" with a specific IP address(Note down this ip address), Anonymous login will be on but preferabaly create a user name (File--->settings--> Add[*give it a read/write permission]) and the password.
Then decide for yourself what exactly you wanna share with the other mobile, in this example i am going to share my SD CARD. Go to file -->settings--> other--> and in the "Login Folder:" put in "\\storage card"
Once that's done open up resco ftp on Mobile B. Go to My ftp locations-->New ftp session--Give a name to ftp session (like abcd), In the host type in the ip address address that you noted down earlier--> let the port 21-->Login:ut in the username that you created-->Password: put in the password
and Hey there you go!!!, you will have the Sd Card of Mobile A and you will be working on it as if it is in your own mobile..

....Cont...
On mobile A moccha will notify you that a user has logged on to your server. You can use all FTP commands on mochasoft.
I downloaded the 700Mb movie which was stored in my frnds mobile while we were having beer and it got downloaded at the speed of 450kbps(it started off with 350kbps and was fluctuating from 380 to 450kbps), Just before doing this i tried to copy a 10mb file using bluetooth and resco showed the speed 20kbps........
So next time when you go out to meet your frnds you can transfer all their stuff at the lightning speed via WIFI file sharing......
Good Luck!!

If i got to settings connetions i can only create a modem or VPN connection..nothing with ad hoc..what am i missing?

If I remember correctly, you set up an adhoc network as if you were to enter a custom network with a hidden ssid. You enable wifi and go to the screen where it shows the available networks. There you can add a new network and tick this is an adhoc connection.
Also, since adhoc connections have no dhcp server, it is best to work with fixed ip addresses.
Sent from my GT-I9100 using Tapatalk