Database Users

TouchPal wont show after a while

Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt

iv got version 3.5 aswel, iv had no problems with it
the only problem i have is that, in landscape mode the key sizes dont increase, it appears small, but never the less a great keyboard

Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.

gt112 said:
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
Click to expand...
Click to collapse
just tried that, no problem what so ever
try this
uninstall, soft reset, install, soft reset, then go to settings, inputs, choose touchpal as default keyboard, then press ok, then soft reset
i know thats long but it should do the trick, seems to me as if that it wasnt installed correctly and theres some errors, so try what i said and let me know if it works

OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.

gt112 said:
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
Click to expand...
Click to collapse
just the thread, i guess your right, your not alone...but..its still wierd as iv been using touchpal since last wednesday and its still working fine for me
could it be that touchpal is conflicting with another keyboard on the device?
Have you gone to settings/inputs and selected touchpal as the keyboard?
I cant think of any other ideas because its working perfectly for me

Thanks xdaman
Just done a new re-install and it seems ok now. TBH I am now using the version from Cooltek so I may have had myself to blame.
On another note, I am having probs setting custom commands, I have the followig questions, can anyone offer any wisdom ?
You can setup custom commands such as Ctrl+z etc. They can be stored in place holders accessed by tab+downslide on the Control Tab button (the one with the 4 arrows). The instructions for creating custom command scan be found in the manual (section 4.2) here
Here are my questions
1. How do you create a combination command? e.g. They have a built in command called "Select All && Copy". This is 2 commands. How do you create this ?
2. After I mess up all my command buttons. How do I reset them to their defaults ?
3. When I create a command, Is Flag5 the ASCII key code? The manual is not specific on this. Also, if Flag5 is the ASCII code, why do I need to then enter the Alphabet index of the letter ?
4. I only seem to be able to edit the top Custom command button. If I try and assign values to the lower buttons, the edit appears in the top button. Is this a bug ?

cant install/wont install
downloaded the cab file..after it ran..it looks like explorer window pops up and tried to o something..anyway it says the page cant be found..tried loading in both card and local and get the same response..it does tell me the it was unsuccessful in loading
i gues its the lastest becuase i downloaded from the site
gt112 said:
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
Click to expand...
Click to collapse

HTC SIPs stuck on numeric input?

Hi all,
I'm having a problem with the HTC SIPs (Full Qwerty and Compact Qwerty) - they're both stuck on numeric input and won't switch back to text input mode.
ie, I click on the "ABC" button and nothing happens. I therefore can't enter anything other than numbers and symbols!
Has anyone else seen this issue? I'm having to use PCM Keyboard in the meantime, which is frustrating as it doesn't have easy access to "." etc.
Thanks
J

PCM Keyboard prevents the HTC SIPs from working properly. Either remove PCK Keyboard or try the latest version (0.19)

I have the same problem
I have the same problem.
I haven't installed any additional keyboard software, and suddenly my text keyboard is stuck on numerics.
I have a feeling this may have been something to do with the latest firmware from HTC that I've recently installed.
Anyone got any ideas?
Thanks in advance
Pete

Petee said:
I have the same problem.
I haven't installed any additional keyboard software, and suddenly my text keyboard is stuck on numerics.
I have a feeling this may have been something to do with the latest firmware from HTC that I've recently installed.
Anyone got any ideas?
Thanks in advance
Pete
Click to expand...
Click to collapse
Do you have HD Tweak installed?
this will happen if you enable T9

Sorted
Yep, that was it
Sorted - Thankyouverymuchsir

okay so I too now have this same problem, originally I had Dutty's Leo R6 on my phone with HDTweak so I decided to reflash my phone with Dutty's Leo R7 and this time not install HDTweak and see if it works.... But even after doing that, I still keep getting all 3 types of the keyboard inputs stuck on numbers and symbols. after a soft reset whenever I try and type in a text, the first time it usually works fine. But after I have sent the 1st message or just returned to the home tab and try to write another msg, all input keyboards are stuck. Note: I can temporarily fix it by clicking on a previous message, waiting for the menu to popup from the threaded view and then closing it, but after writing that message it will revert back to being stuck
So no HDTweak installed, using new HTC Messaging App, have turned off T9 Autocompletion + Symbol Lock under Input Options and I have also tried installing geniusgeng's cab here: http://forum.xda-developers.com/showthread.php?t=486187&highlight=[solution]+qwerty+keyboard but that doesn't work...any thoughts on how I can fix this with something more permanent?
Thanks

Not sure of any reg tweaks, but why don't you install HD Tweak and then disable T9

Hey, thanks for the amazingly fast reply!!!
okay so I just tried reinstalling HDTweak again and disabling T9, but its still not working I keep having the same trouble. I have also tried all different combinations of disabling T9 only in HDTweak, or both HDTweak and under Input Options and only in Input Options and so on.... but the problem doesn't seem to get resolved.
I have experimented some more and it turns out that the keyboard will only get stuck when I go to the messages tab and click on a text I received to reply to it. If i go to the messages tab and create a new message (where I have to enter in the contact and can't see the threaded msgs) then the keyboard is fine all the time. Does anyone else have this same problem as well, or is it just me?
I would really prefer to be able to quickly reply to texts instead of creating new messages every time...gonna try disabling the htc messaging app (was going to anyway cause it takes waaaay too loooong lol) and see if that magically works
Thanks again!

I had a similar problem and fixed it
I logged on here to see if someone could tell me how to fix my issue, but it is regarding an HTC HD2, not a Blackberry. My problem was similar but not exactly the same. My phone somehow permanently got stuck on Xt9, which I hate and am worthless at using. I couldn't seem to find the answer anywhere online so i'm writing my experience here in case it helps anyone.
Hitting the XT9 / ABC button did NOTHING to fix it. Even though the button would visually change from XT9 to ABC and back, when I hit it (it would change to a green color), the keys themselves would not change at all, and i was stuck looking at keys that make zero sense to me qw... er...ty... ui.... it was like a bad nightmare. I have no idea how I managed to get it stuck on this (sorry I know most of you techies probably have no problem with it but I am just not very tech savvy).
I tried taking out my battery, popping the sim card in and out several times, restarting. Sounds stupid but I didn't know what else to do as I couldn't find any solutions online. Finally called tmobile.
First the rep told me to try going to Settings > Locale and Text > Text Input. She asked what my settings were on, I said ABC. She told me to turn it to XT9 instead, then close out the screen, go back, then switch back to ABC. I did that, and no dice. I figured either the settings are frozen or I'm cursed.
Then she had me go to the screen to write a text msg. When your cursor is in the text box to write in, you will see a little keyboard icon at the bottom of the screen. There's a little arrow next to it. Click on that arrow. That brought up the options of Full QWERTY and Compact QWERTY, and apparently somehow my phone got switched to Compact QWERTY. So I switched back, and that fixed it.
So yeah, apparently there are a couple of different ways to change it.
I wanted to hug this woman through the phone, i was so relieved to be able to text again (I could not write out one single word while on Compact QWERTY). I'm not sure if going this route can help anyone else but it was the answer for me. There may be other options for you when you click on the arrow next to the keyboard.
Good luck!

Having problems selecting QWERTY keyboard.

Hi!
I received a Touch HD few days ago and from the first time I noticed that something doesn’t works properly.
Initially the keyboard by default was the QWERTY one. I changed it to probe the compact one. I did the change with no problems (obviously was not a difficult issue). Well not so obviously because the problem was when I tried to return to full QWERTY keyboard.
I selected the fullQWERTY in the configuration menu, I pushed the OK button but when I tried to write a new message the compact keyboard was still there. I tried to change to any other keyboard but the result was the same. I haven’t installed any keyboard so is not a software incompatibility issue.
I reset the phone, check for rom updates, etc but I cannot select QWERTY keyboard. I have search about this but the only information I found is a post in this forum with no answer.
Please, any information about a possible solution will be greatly appreciated. Just imagine a wonderful HD without its QWERTY keyboard…
Thank you very much.

I have the same issue. A full reset did fix it but then it randomly happened again. Obviously that's not ideal!
Any ideas anyone?
Might it be worth an email to htc?

You checked for ROM updates using? I'm sure there is some registry key but not really certain.
Regards,
Carty..

I have encounter the same issue. I have found out that if you go through setting and select keyboard to change..it will not work...
It seems that touchflo took over the registry.....
Now the correct way to change your keyboard is to
1. press your keypad up.
2. you should see this little arrow beside the your keypad icon
3. when you tap the arrow you will see this menu pop up to pick the keyboard layout.
This is the ONLY WAY to change the keypad
Hope this helps
JuanQ said:
Hi!
I received a Touch HD few days ago and from the first time I noticed that something doesn’t works properly.
Initially the keyboard by default was the QWERTY one. I changed it to probe the compact one. I did the change with no problems (obviously was not a difficult issue). Well not so obviously because the problem was when I tried to return to full QWERTY keyboard.
I selected the fullQWERTY in the configuration menu, I pushed the OK button but when I tried to write a new message the compact keyboard was still there. I tried to change to any other keyboard but the result was the same. I haven’t installed any keyboard so is not a software incompatibility issue.
I reset the phone, check for rom updates, etc but I cannot select QWERTY keyboard. I have search about this but the only information I found is a post in this forum with no answer.
Please, any information about a possible solution will be greatly appreciated. Just imagine a wonderful HD without its QWERTY keyboard…
Thank you very much.
Click to expand...
Click to collapse

HD - Full QWERTY keyboard stuck on numbers.

Hi,
Just yesterday I have noticed a very strange issue. The full qwerty keyboard is permanently stuckup on number keypad which is visible when we press 123.
Any (desperate) attempts to press ABC to get the alphanumeric keyboard back just doesnt work. I tried several ways but its just not working.
I really do not want to do a hard reset for this issue. Is there any registry key that I maybe able to alter.
I dont know the source of this issue but my wild guess is it might have happened after I installed cab to skin the stock calculator.
Any help will be appreciated.

araje said:
Hi,
Just yesterday I have noticed a very strange issue. The full qwerty keyboard is permanently stuckup on number keypad which is visible when we press 123.
Any (desperate) attempts to press ABC to get the alphanumeric keyboard back just doesnt work. I tried several ways but its just not working.
I really do not want to do a hard reset for this issue. Is there any registry key that I maybe able to alter.
I dont know the source of this issue but my wild guess is it might have happened after I installed cab to skin the stock calculator.
Any help will be appreciated.
Click to expand...
Click to collapse
i posted a query about this yesterday as well as i had the same problem. search for keyboard stuck on symbols. i fixed it by leaving the battery out overnight, 60 seconds didnt seem to work, but im looking for a better fix or better a prevention. btw i didnt install any cab for the calculator

araje said:
Hi,
Just yesterday I have noticed a very strange issue. The full qwerty keyboard is permanently stuckup on number keypad which is visible when we press 123.
Any (desperate) attempts to press ABC to get the alphanumeric keyboard back just doesnt work. I tried several ways but its just not working.
I really do not want to do a hard reset for this issue. Is there any registry key that I maybe able to alter.
I dont know the source of this issue but my wild guess is it might have happened after I installed cab to skin the stock calculator.
Any help will be appreciated.
Click to expand...
Click to collapse
try change the input method to something else, then switch back (to full qwerty) to see if it defaults back to the qwerty

buggybug0 said:
try change the input method to something else, then switch back (to full qwerty) to see if it defaults back to the qwerty
Click to expand...
Click to collapse
Already tried this. Doesnt seem to work.

Frustrating ain't it?
Read post #4 here,
http://forum.xda-developers.com/showpost.php?p=3140507&postcount=4
Fixed it for me.

gadgetuk you are a life saver.
Thanks so much. It worked like a charm

very interesting,looks like lots of people are having the same problem on the same date , I have the same problem too,lucky I search here before I do a hard reset , Thanks to
"flogger
Junior Member
Join Date: Jan 2009
Posts: 1
I had the same problem when I installed HD Tweak, it started happening.
I disabled the T9 only in HD Tweak, Shut down the phone, start it again and it went back to normal. No tricky stuff. At least it worked for me."

Worked for me too. Thanks.

T9 only in HD Tweak? Where is that... I looked on options about T9 and disabled it, no go... is there something else I am looking for?

Fix for Full Qwerty Keyboard Stuck On Numbers
This happened to me sometime after I performed this reghack to change word completion behavior:
IMPORTANT: be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e0010409
* Value of Ime File from \windows\xt9ime.dll to \windows\compime.dll
* Value of Layout Text from XT9 IME to COMP IME
To fix it, I used a registry editor to revert back to XT9 settings, soft reset, verified normal Full Qwerty Keyboard functionality returned, then switched back to COMP settings by performing the above reghack again, soft reset, and now I have the auto-completion scheme I prefer and the Full Qwerty is back.
Hope this helps!

Solution found, thread closed

auto abc/t9 selection based on program/field

in most situations my niki defaults to t9 which is what i want it to do. (hardware keyboard)
In a couple of situations/places to type it defaults to abc mode eg in internet explorer address bar.
It also used to do this when writing a contacts name in the to field of a blank text message. This meant i could enter a couple of characters and then scroll down the contacts which appeared at the bottom of screen.
Since hard resetting and adding m2d last week it now defaults to t9 in the above situation. Anyone know a way of getting it to default to abc in this field.
It's a fairly minor annoyance but it used to work so there must be a way of making it happen. Is there a reg change i can make or something.
I'm running official htc wm6.1 rom with m2d build 21 on, and not a lot else.
Thanks
Dan

Kind of solved this - realised that I'd upgraded ezInput to rc2 (in order to work with opera) and thats what had caused this to stop working.
Downgraded again and it works as described above again.
Not too bothered as i didn't like opera that much in the end.
Main annoyance with downgrading again is that I dont seem to be able to add words less than 4 letters to the custom dictionary. This was fixed in RC 2
Anyone else experience this problem/ now of a fix.