Searched and searched, Has anyone had an issue with using the wlan SD8686 with WPA?
I can connect with no security and with WEP and I am able to browse the web.
I can still connect to the router using any of the WPA but can not get any pages to load in IE only works with wep or no security. 3 other laptops work fine.
Any idea? HTC Tech support no help.
Stealtheo said:
Searched and searched, Has anyone had an issue with using the wlan SD8686 with WPA?
I can connect with no security and with WEP and I am able to browse the web.
I can still connect to the router using any of the WPA but can not get any pages to load in IE only works with wep or no security. 3 other laptops work fine.
Any idea? HTC Tech support no help.
Click to expand...
Click to collapse
I can't answer.. but that reminds me the WPA issue that I have with the HTC Touch ..... my Touch is unable to use any WPA ... when connected the touch just freeze .. and I have to soft-reset and hope to the Wireless not connecting before being connected before disabling the Wireless.
it seems that WPA or the wireless chip is really bad ... but don't know which one !
Shift works fine with WPA I am currently using TKIP+AES
I have had nothing but issues with my Shift and Belking N Router using WEP...
Sometimes it would connect, the majority of the time the shift couldn't see the network and it did connect it would lose connection. I tried it with WEP and also with no security and also with MAC address authentication only. Every 50 times I tried to connect, it would connect maybe once.
So, decided to use my old standard 54g Belking router. Guess what, no issue so far with no security applied. Was planning to try it with WEP later....
faisal.husain said:
Shift works fine with WPA I am currently using TKIP+AES
Click to expand...
Click to collapse
I live in US and unit was from UK think this could be a problem with WPA?
I have no problem with NO security and NO problem with WEP only with any type of WPA. Also searching the net, seems like the wirerless chip in the SHIFT not a very good track record, lots of driver issues
faisal.husain said:
Shift works fine with WPA I am currently using TKIP+AES
Click to expand...
Click to collapse
Can you tell me what the Driver VER No is on your shift tfor the network card?
My unit has the Marvell SD-8686
Wifi
I had problems, sometimes the shift could not find my network, sometimes it woeked.
after setting my dlink dir655 router in b/g moder rather than b/g/draft n mode all has worked so far.
ok guys i use linksys running open source dd-wrt v23 sp2 firmware; works great; i must admit i have not used the shift on other wifi network routers....
No connection
Hi,
maybe someone can help. Since yesterday I belong tot he proud owners. But, but, I can’t get a connection to the internet over my WLAN router.
Router Netgear WPNT834. Whatever I did no luck: either I get the message: limited connectivity or only local Zugriff connection something like that.
No problem with XP notebooks, but with Shift and Vista.
Has anyone an idea what causes the problem? Is it the router?
Do you know any router you can recommend: strong signal and reliability?
Thanks
Settembrini
No issue with WPA here
Hi Settembrini,
So you got your Shift from Amazon.de at the same time as they delivered mine after all
Regarding the WiFi connection to the router, it seems to be some routers / chipsets.
I am also using WPA (with a Siemens SX550i router) and it worked without any problems. The Shift detected an encrypted network with hidden SSID and after I entered the SSID and the encryption password it connected immediately and with a stable connection.
WLAN access
Hi mw65719
yes, more or less same time.
So what is the conclusion? It is my Netgear router WPNT834, why I do not get a connection? Need for a new router it seems!
Thanks!
S.
Yes same here, I just bought the new Belkin N1 Vision router and all other equipment works but the Shift can't even see the the router. I just hooked a netgear router in series with the belkin and the Shift can now see the Netgear..... Was worried for a bit there.... Really annoyed about the shift not being able to see the belkin, the Belkin wasn't cheap.
Hi,
I was not able to establish a connection to my Netgear router WPNT834, then I tried the Speedport 700 V and it worked without any problems, no special settings in Vista neccessary.
I guess you have a different Netgear router than mine.
S.
I can only see WEP in my Wifi setup, is there an update to enable WPA/2 encryption ?
I connect my p3600 to my WEP secured network, so i guess it sould work on p3600i too.
Hope that helps
yes WEP works ,but I'd like to change my home wifi to WPA as its more secure but looks like the phone doesn't support this protocol.
which is strange as I think this has been out for a few years , isn't this included in WM 6?
I'm using Lalle's latest Manila 2D ROM, and I got WPA as well as WPA2 available. I guess it depends on the ROM you're using.
Sorry I misstyped
I wanted to say:
I connect my p3600 to my WPA secured network, so i guess it sould work on p3600i too.
Hope that helps
Sorry for missleading
its funny u should be asking this im have big issues getting my spv m700 to connect to me belkin g mimo + router its set to wpa psk tkip and i cant connect it attempts to but no good just stops then comes up with a cross on me router name only way to get it to see me router as there again is to reset the phone.
now it connects to me dads fine and thats the same router only diff is firmware.
any one else had this if so how was it fixed.
p.s i allso have a ipaq rx3715 does the same thing it wont connect to me router.
Hi, is there anyone else who has problems getting a wifi connection on theyr hero using linksys routers? My Hero can't connect to the router under any settings. I have tried all possible settings on the router with and without security enabled. Has anyone got the same router and gotten a connection?
OttarA said:
Hi, is there anyone else who has problems getting a wifi connection on theyr hero using linksys routers? My Hero can't connect to the router under any settings. I have tried all possible settings on the router with and without security enabled. Has anyone got the same router and gotten a connection?
Click to expand...
Click to collapse
Do you use any special characters in your SSID(Networks name). Because I noticed that it was impossible to connect to my router that uses "ä" in the SSID.
Oh that might be it The SSID has a underscore in it Thank you my Hero
Hello all:
I have the following problem:
I can´t connect with my wifi network with any tested nand rom (hastarin and Mdeejay kernels) The problem is that the only network that I can´t see is my home network, I can see other networks but mine is "invisible" but in the router, the SSID is visible.
Can someboy hlep me?
Thanks in advance
osquitar said:
Hello all:
I have the following problem:
I can´t connect with my wifi network with any tested nand rom (hastarin and Mdeejay kernels) The problem is that the only network that I can´t see is my home network, I can see other networks but mine is "invisible" but in the router, the SSID is visible.
Can someboy hlep me?
Thanks in advance
Click to expand...
Click to collapse
2.4 or 5ghz wifi from the router you use?
Looks like 5ghz because you can see others,5ghz is not supported
Thaks for your answer. The frecuency is 2.4 Ghz
Any ideas? Please help...
i had this problem too but i reset my router, changed the encryption to open and it worked. Then changed back to wpa2 tkip and it`s still working
Hello All,
I need your help as i cannot find my home wifi network, i found other networks but not mine, even if i;m beside the wifi antenna.
The router is a Baudtec
Thanks
have you set your router to hide the ssid?