Database Users

Recovery

RA Recovery image has an option Nandroid back + ext back up..if i wipe my extension..does anyone know how to restore your extension after full wipe?? Is that even possible??

You can back up your ext partition yourself:
mkdir /sdcard/ext
cp /system/sd/* /sdcard/ext/
and to restore (do this in the recovery console btw..)
mount -o rw /dev/block/mmcblk0p2 /system/sd
rm -r /system/sd/*
mount /sdcard
cp /sdcard/ext/* /system/sd/
Then all you need to do is reboot

Thanks for the help

BTW the "*"..what would i put in to replace the *

big_d093 said:
BTW the "*"..what would i put in to replace the *
Click to expand...
Click to collapse
The asterisk (*) is used as a wildcard in Unix/Linux (Android was built on Linux), so in this case it means "Anything"
Code:
cp /source/directory/* /destination/directory/
This command would simply copy "Anything" within the source directory to the destination directory.

Need help with apps2sd on milestone

I found a guide to aply apps to sd on my milestone. I got it working, but the problem is, that apps installed in the data/app-private folder doesn't show as installed. I can see that they are placed in ext2 partion on my sd card along with the other apps, that normaly installes in data/app.Here is the guide i used
After creatting a ext2 partition on my SD card, i copied ext2. To sd card along with
mot_boot_mode script
#!/system/bin/sh
export PATH=/system/bin:$PATH
mot_boot_mode.bin
insmod /data/ext2.ko
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
Then in recovery mode i entered
adb shell
su
cp /sdcard/ext2.ko /data/ext2.ko
insmod /data/ext2.ko
mkdir /data/sdapp
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
cp /data/app/* /data/sdapp/
mkdir /sdcard/sicherung
cp /data/app/* /sdcard/sicherung
rm -r /data/app
umount /data/sdapp
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
ls /data/sdapp
ln -s /data/sdapp /data/app
chmod 644 /data/sdapp/*
/data/busybox/chown -h 1000:1000 /data/app
/data/busybox/chown 1000:1000 /data/sdapp/*
/data/busybox/chown 1000:1000 /data/sdapp
insmod /data/ext2.ko
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
mount -o remount,rw / /system
mv /system/bin/mot_boot_mode /system/bin/mot_boot_mode.bin
cp /sdcard/mot_boot_mode_script /system/bin/mot_boot_mode
chmod 755 /system/bin/mot_boot_mode
Do i need to make a symbolic link in data/app-private also?
I would realy like to get this working, because i purchased a lot of apps on the marked. But i have only half of them installed. It used to work on my HTC hero. But it was allready enabled in a custom rom. And that is not possible to do on a Milestone
Thanks

Fixed it by changing app-private folder two

hey glaus...
this almost seems like a guide, hehe...
i'm trying to get apps2sd to work on my milestone as well...
i tried booting in recovery mode and entering the chain of commands you just set out....
but when i go into recovery mode, i see the reboot system option, apply sdcard:update.zip, wipe data/factory reset and wipe cache partition....
and under it, i have e: can't open /cache/recovery/command
any ideas on how to fix this or where can i enter those commands you set out?
i tried in adb shell, but i get a /data/busybox/chown is not found error when setting the permissions...
thanks!
do

crap me too and it deleted some apps 2 i really want this been trying for a week oh i have a telus milestone and get the same above error.busybox is installed and hard drive is partioned

ah crap market is gone 2 lol gotta do a nano restore......man i want this bad i even bricked my phone and brought it back to life this week arghhhh

yeah...i don't know where claus is from...but if he has a telus milestone, he's the only one i've seen been able to install apps2sd with a telus milestone
i've seen other countries, even some with the same bands as we have, but none have had the actual "telus" one....the funny thing is that i can get everything else to work..
i have titanium backup pro, emulator, root explorer and everything is at superuser access...
if claus can help, i will bear his children
edit: how the heck do you install/activate the mot_boot_mode script? I see reference to it in a few wikis on basically that's what will allow us to use apps2sd...but I have no clue how to implement it

got app2sd working on milestone using a diff method will post soon

ok i got app2sd working on my telus milestone here is how i did it if u tried this method here ur gunna have to unroot then root or use a nano backup of freshly rooted phone busybox need mot to be installed so use titanium for back up and proceed http://forum.xda-developers.com/showthread.php?t=692367

ClausG76 said:
I found a guide to aply apps to sd on my milestone. I got it working, but the problem is, that apps installed in the data/app-private folder doesn't show as installed. I can see that they are placed in ext2 partion on my sd card along with the other apps, that normaly installes in data/app.Here is the guide i used
After creatting a ext2 partition on my SD card, i copied ext2. To sd card along with
mot_boot_mode script
#!/system/bin/sh
export PATH=/system/bin:$PATH
mot_boot_mode.bin
insmod /data/ext2.ko
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
Then in recovery mode i entered
adb shell
su
cp /sdcard/ext2.ko /data/ext2.ko
insmod /data/ext2.ko
mkdir /data/sdapp
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
cp /data/app/* /data/sdapp/
mkdir /sdcard/sicherung
cp /data/app/* /sdcard/sicherung
rm -r /data/app
umount /data/sdapp
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
ls /data/sdapp
ln -s /data/sdapp /data/app
chmod 644 /data/sdapp/*
/data/busybox/chown -h 1000:1000 /data/app
/data/busybox/chown 1000:1000 /data/sdapp/*
/data/busybox/chown 1000:1000 /data/sdapp
insmod /data/ext2.ko
mount -t ext2 /dev/block/mmcblk0p2 /data/sdapp
mount -o remount,rw / /system
mv /system/bin/mot_boot_mode /system/bin/mot_boot_mode.bin
cp /sdcard/mot_boot_mode_script /system/bin/mot_boot_mode
chmod 755 /system/bin/mot_boot_mode
Do i need to make a symbolic link in data/app-private also?
I would realy like to get this working, because i purchased a lot of apps on the marked. But i have only half of them installed. It used to work on my HTC hero. But it was allready enabled in a custom rom. And that is not possible to do on a Milestone
Thanks
Click to expand...
Click to collapse
fixed http://forum.xda-developers.com/showthread.php?t=692367

need write to /system or something EXEC path

I was the first person I know on the internet to compile nmap for android and this guy ( http://wjholden.com/nmap/ ) took it to the next level got a new phone ( CM6 with OC ) nbow it does not work
* can't write to /system even with rw remount
* if I boot recovery I can' write to /systm but its just a temp fs so failsause ...
* can't ADB shell (read below ) to find out where system is really mounted OR mount the real /system my self ..
* remouted / but anything I add gets wipped on reboot ...
* onlything that works is remount / , copy nmap and then add PATH hackery to EXEC nmap ... on EVERY reboot ...
NOTES BELOW:
Code:
http://forum.xda-developers.com/showthread.php?t=701589&page=4
I think its because /system is protected in CM5+ ? even with remount
command... ?
let me know what I need to copy where in recovery mode to /system to
get yours to run properly :/
you could also have your installer check for this and have notes etc ..
# uname -a
Linux localhost 2.6.29.6-cyanogenmod #1 PREEMPT Fri Sep 17 16:05:39
PDT 2010 arm v6l GNU/Linux
# ls
ls
NMAP FOR ANDROID CROSS COMPILE ARM.html
NMAP.zip
nmap
nmap-4.01-1.spec
nmap-mac-prefixes
nmap-os-fingerprints
nmap-protocols
nmap-rpc
nmap-service-probes
nmap-services
# cp * /system/bin
cp * /system/bin
cp: can't create '/system/bin/NMAP FOR ANDROID CROSS COMPILE ARM.html': Out of m
emory
cp: can't create '/system/bin/NMAP.zip': Out of memory
cp: can't create '/system/bin/nmap': Out of memory
cp: can't create '/system/bin/nmap-4.01-1.spec': Out of memory
cp: can't create '/system/bin/nmap-mac-prefixes': Out of memory
cp: can't create '/system/bin/nmap-os-fingerprints': Out of memory
cp: can't create '/system/bin/nmap-protocols': Out of memory
cp: can't create '/system/bin/nmap-rpc': Out of memory
cp: can't create '/system/bin/nmap-service-probes': Out of memory
cp: can't create '/system/bin/nmap-services': Out of memory
# df /system
df /system
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/block/mtdblock3 245760 240824 4936 98% /system
# mount
mount
...
/dev/block/mtdblock3 on /system type yaffs2 (rw)
Code:
mount -o rw,remount -t yaffs2 /
rm -Rf /nmap
mkdir /nmap
echo 'export PATH=$PATH:/nmap' > path
cd /nmap
wget http://rmccurdy.com/stuff/G1/BINS/NMAP/NMAP.zip
unzip NMAP.zip
chmod 777 /nmap/*
export PATH=$PATH:/nmap
echo run /nmap/path before you start nmap
nmap -vvv 127.0.0.1
rmccurdy.com/nmap.sh (tested on CM6 / mytouch slide )
in normal mode ..
Code:
bash
localhost / # mount -o rw,remount -t yaffs2 /system
mount -o rw,remount -t yaffs2 /system
localhost / # cd /system
cd /system
localhost system # for i in `ls` ;do mkdir $i\\nmap ;done
for i in `ls` ;do mkdir $i\\nmap ;done
mkdir: can't create directory 'app\nmap': Out of memory
mkdir: can't create directory 'bin\nmap': Out of memory
mkdir: can't create directory 'build.prop\nmap': Out of memory
mkdir: can't create directory 'etc\nmap': Out of memory
mkdir: can't create directory 'fonts\nmap': Out of memory
mkdir: can't create directory 'framework\nmap': Out of memory
mkdir: can't create directory 'lib\nmap': Out of memory
mkdir: can't create directory 'lost+found\nmap': Out of memory
mkdir: can't create directory 'media\nmap': Out of memory
mkdir: can't create directory 'usr\nmap': Out of memory
mkdir: can't create directory 'xbin\nmap': Out of memory
in "Android system recovery (2e)" :
( note: /system is also a vfs I think .. I adb push to it and reboot and the file is gone ... )
Code:
C:\Documents and Settings\Administrator\nmap>adb shell
- exec '/system/bin/sh' failed: No such file or directory (2) -
C:\Documents and Settings\Administrator\nmap>

You can't write in /system in normal boot mode as security is on (s-on), remounting rw does you no good.
In recovery you will need to mount /system from clockwork before you can do anything.

I do have Clockwork Recovery 2.5.0.1 but I am not sure how to get to a shell and or find /system mount path as I can't adb shell ( read above ) so I can't remount or mount /system
rmccurdy.com/nmap.sh * this is what I am using for nmap as of now ..
Usage:
bash -x /sdcard/nmap.sh localhost
etc ...

There's an option in clockwork under partitions to allow you to mount the system. I'm not sure why but a lot of people have an issue getting into su with adb when they are in recovery, the constant /system/bin/sh error is annoying. Also, if I remember right, yaffs2 is not what you use to mount the system when using that command. It's mtdblock3 or something like that if I'm thinking along the correct lines here.
Maybe you should try putting it in a zip file as a script and running it that way since you use a different command (and much easier) to mount the system and write to it. Then again, I'm not sure what you're trying to so so I could just be talking out of my a$$

I can't do anything usefull in recovery ... reboot and apply update.zip but I dont how how nor do I really want to make a .zip / script to mount system etc .. do you know a zip I can work from as an example

rmccurdy said:
I can't do anything usefull in recovery ... reboot and apply update.zip but I dont how how nor do I really want to make a .zip / script to mount system etc .. do you know a zip I can work from as an example
Click to expand...
Click to collapse
The slide doesn't have S-Off, most HTC phones have them now...So you have to wait for Alpharev 2.0 to be released.

Ace42 said:
The slide doesn't have S-Off, most HTC phones have them now...So you have to wait for Alpharev 2.0 to be released.
Click to expand...
Click to collapse
Yes, but in recovery we can mount the system and write to it. Phones with s-off can do that while booted normally because the NAND is unlocked and the system is no longer protected.
You can do it one of two ways. This one is easiest if you know linux commands but are unfamiliar with update-script format. Make an update script and put this in there:
Code:
show_progress 0.5 0
run_program PACKAGE:example.sh
show_progress 0.5 10
You don't have to use the show_progress line, it's just for aesthetics.
Make a .sh script, name it whatever you want and put the linux commands you want to execute in the script. For example:
Code:
#!/sbin/sh
#
##############################################
mount /system;
rm -rf /nmap
mkdir /nmap
echo 'export PATH=$PATH:/nmap' > path
cd /nmap
wget http://rmccurdy.com/stuff/G1/BINS/NMAP/NMAP.zip
unzip NMAP.zip
chmod 777 /nmap/*
export PATH=$PATH:/nmap
echo run /nmap/path before you start nmap
nmap -vvv 127.0.0.1
exit 0;
Or what ever you're trying to get done. I'll upload an example file of all this since hands on is always better. Looking at this though, you may want to have the files in the zip (in the directories they will be installed to) because wget probably wont work since the radio is off while in recovery.

interesting thanks ! ... do you have to resign it and all or can you just edit and rezip it ?

rmccurdy said:
interesting thanks ! ... do you have to resign it and all or can you just edit and rezip it ?
Click to expand...
Click to collapse
As long as you're using clockwork you just edit and zip. Might be easier to use an archive explorer to open (without uzipping it) then drag and drop, but do what's easiest for you.

sl4a shell script help

Hi all,
I'm trying to run a shell script in sl4a but I'm running into problems. Here's what I want to do: change ADW configuration files in one click (since the app doesn't yet do it natively). There are two files that need to be changed for this to happen:
Code:
/data/data/org.adwfreak.launcher/databases/launcher.db
/data/data/org.adwfreak.launcher/shared_prefs/adw_ex_preferences.xml
I'm trying to delete those files and copy in new files from a stored location on the SD card but I can't get the sl4a script to run the following rm commands:
Code:
rm -rR /data/data/org.adwfreak.launcher/databases/launcher.db
rm -rR /data/data/org.adwfreak.launcher/shared_prefs/adw_ex_preferences.xml
I use
Code:
su -c
before the rm commands to run them as root, but the error then is that the /data partition is not mounted (which I find strange since it should be rw anyway...). I've tried using
Code:
mount -o remount,rw /dev/block/userdata /data
and it looks like it runs but then it doesn't work and I can't rm the files anyway.
Am I running into a limitation of sl4a or shell scripts in sl4a? I can rm the files from the terminal, so I'm not sure what the issue is. I'm very new to this (obviously) so any tips would be helpful. Thanks!

Here is my full script currently:
Code:
#!
kill android.process.acore
kill org.adwfreak.launcher
busybox rm -R /data/data/org.adwfreak.launcher/databases/*
busybox rm -R /data/data/org.adwfreak.launcher/files/*
busybox rm -R /data/data/org.adwfreak.launcher/shared_prefs/*
cp /sdcard/adw_ex_launcher.db /sdcard/ADW/Honeycomb/adw_ex_launcher.db
cp /sdcard/adw_ex_settings.xml /sdcard/ADW/Honeycomb/adw_ex_settings.xml
cp /sdcard/ADW/Portrait/adw_ex_launcher.db /sdcard/adw_ex_launcher.db
cp /sdcard/ADW/Portrait/adw_ex_launcher.db /data/data/org.adwfreak.launcher/databases/launcher.db
chmod 664 /data/data/org.adwfreak.launcher/databases/launcher.db
cp /sdcard/ADW/Portrait/adw_ex_settings.xml /sdcard/adw_ex_settings.xml
cp /sdcard/ADW/Portrait/adw_ex_settings.xml /data/data/org.adwfreak.launcher/shared_prefs/adw_ex_preferences.xml
chmod 664 /data/data/org.adwfreak.launcher/shared_prefs/adw_ex_preferences.xml
exit
When I test the rm commands in the sl4a shell, they don't remove the files even when the /data partition is mounted. I've tried all that I know. Help please!
Sent from my DROIDX

I don't know what you are trying in your second post, but from your first post I would say:
Code:
su
busybox rm -r /data/data/org.adwfreak.launcher/databases/*
busybox rm -r /data/data/org.adwfreak.launcher/files/*
busybox rm -r /data/data/org.adwfreak.launcher/shared_prefs/*
cp /sdcard/adw/prefs.xml /data/data/org.adwfreak.launcher/shared_prefs/
..
kill org.adwfreak.launcher
If you do "chmod 664" on the files, you also have to do "chown & chgrp" or the launcher won't be able to write into the settings xml's/db's.
And /data ist mounted rw, everything else would be senseless.

Thanks for the response.
I'm trying to change ADW configuration with one click. I'm going to use Tasker to create a widget that, when clicked, runs a script. That script will:
1. delete the current ADW configuration files (launcher.db and adw_ex_preferences.xml)
2. copy the target configuration files to the proper places (and set permissions, owner, group)
3. restart ADW so that the configuration is loaded
OR
3. open the ADW settings page so that I can click "restore desktop" and "restore preferences" and have the configuration loaded in an almost-one-click solution.
The script in the 2nd post is my best effort at that. I have tried the busybox part of the script, but I don't believe it makes a difference. I will try again, though, and report back.
As far as chown and chgrp goes, I'll add in what I think that should be and post that back later, too.

Fr4gg0r said:
I don't know what you are trying in your second post, but from your first post I would say:
Code:
su
busybox rm -r /data/data/org.adwfreak.launcher/databases/*
busybox rm -r /data/data/org.adwfreak.launcher/files/*
busybox rm -r /data/data/org.adwfreak.launcher/shared_prefs/*
cp /sdcard/adw/prefs.xml /data/data/org.adwfreak.launcher/shared_prefs/
..
kill org.adwfreak.launcher
If you do "chmod 664" on the files, you also have to do "chown & chgrp" or the launcher won't be able to write into the settings xml's/db's.
And /data ist mounted rw, everything else would be senseless.
Click to expand...
Click to collapse
Progress update: Success! More or less.
I realized I wouldn't need to remove the files since the ones I was copying in would just overwrite them anyway, so that cleared up that issue.
I did add chown and chgrp (a piece of information I'm sure I'll find useful in the future) so I'm sure that helped. Making sure to get the group and owner right PER YOUR OWN SETUP was key. When I changed ROMs I had to redo it... so check properties with Root Explorer or whatever.
I revised my script a little to add the background wall paper, too.
The true key, however, was using Lua in SL4A and using the 'sush' script in this post here:
http://code.google.com/p/android-scripting/issues/detail?id=184 (comment #9). That allowed me to run my script in the 'sush' format and do what I wanted.
I also had to add a line to kill the launcher process (android.process.acore) so it would restart itself.
I now have a one-click solution to changing between two ADW desktop configurations/settings!
I've attached my script if anyone would like it. Just get SL4A, the Lua interpreter, and put the pieces together! (Use a custom shortcut on the desktop and not a widget and the desktop setup will be preserved; widgets aren't supported in any method...)

[HOWTO] Loop mount

OK, I spent a couple of hours figuring out how loop mounting works. The problem is that the mount command in both toolbox and busybox supports only one loop device. I modified the toolbox version to allow the specification of a new loop device.
Here is how to make a 500mb loop-mounted ext2 system at /mnt/myloop , with the system being stored in /storage/sdcard/myext2system.img
Step 1. Make sure you have root. Download bettermount*.zip to your PC from here. Copy the "bettermount" file from the zip file to /data/local/ (or some other location). One way of doing that is with:
Code:
adb push bettermount /data/local
on the PC. Or you can mount your device to USB, copy bettermount to storage, and then in a root shell copy it to /data/local. Or if you have RW root, you can install bettermount in /bin or some other convenient location.
Start a shell on the device, either via adb or an on-device terminal (not recommended unless you have an external keyboard). Switch to root:
Code:
su
Then make bettermount executable:
Code:
chmod 755 /data/local/bettermount
The following steps assume you're still in your root shell.
Step 2. Create ext2 file system in a file. (Skip this if you already have one.)
Code:
dd if=/dev/zero of=/storage/sdcard/myext2system.img bs=1M count=500
mke2fs /storage/sdcard/myext2system.img
mke2fs will give you a warning that this isn't a block special device, but just press "y" and "enter".
Step 3. Create a loop device node for the ext2 file system. The problem here is that the OS uses loop device nodes for apps moved to external storage and one for the system squashfs, and it only has enough loop device nodes for those purposes--any loop device nodes in /dev/block are already in use. On the assumption that you aren't going to have more than 253 apps moved to storage, we're going to create a loop device node numbered 255. If you like, you can check that there isn't already one with that number with
Code:
ls /dev/block/loop*
So, let's create the loop device node:
Code:
mknod -m640 /dev/block/loop255 b 7 255
Step 4. Create a mount point:
Code:
mkdir /mnt/myloop
Step 5. Mount myext2filesystem.img:
Code:
/data/local/bettermount -t ext2 -orw,exec,noatime,nodiratime,sync,loop=/dev/block/loop255 /storage/sdcard/myext2system.img /mnt/myloop
Enjoy your new file system at /mnt/myloop !
You will have to repeat Steps 3-5 after every boot, or else you can make a script that runs every time you boot. You could simply put the commands for 3-5 into a Script Manager script set to run on boot, or there may be some better, more unixy way (but I haven't had any luck editing startup scripts).
What to do with your shiny new filesystem? Well, you could move not just apps but also their libraries to external storage (you can also do that by remounting your external storage in exec mode).

arpruss said:
OK, I spent a couple of hours figuring out how loop mounting works. The problem is that the mount command in both toolbox and busybox supports only one loop device. I modified the toolbox version to allow the specification of a new loop device.
Here is how to make a 500mb loop-mounted ext2 system at /mnt/myloop , with the system being stored in /storage/sdcard/myext2system.img
Step 1. Make sure you have root. Download bettermount*.zip to your PC from here. Copy the "bettermount" file from the zip file to /data/local/ (or some other location). One way of doing that is with:
Code:
adb push bettermount /data/local
on the PC. Or you can mount your device to USB, copy bettermount to storage, and then in a root shell copy it to /data/local. Or if you have RW root, you can install bettermount in /bin or some other convenient location.
Start a shell on the device, either via adb or an on-device terminal (not recommended unless you have an external keyboard). Switch to root:
Code:
su
Then make bettermount executable:
Code:
chmod 755 /data/local/bettermount
The following steps assume you're still in your root shell.
Step 2. Create ext2 file system in a file. (Skip this if you already have one.)
Code:
dd if=/dev/zero of=/storage/sdcard/myext2system.img bs=1M count=500
mke2fs /storage/sdcard/myext2system.img
mke2fs will give you a warning that this isn't a block special device, but just press "y" and "enter".
Step 3. Create a loop device node for the ext2 file system. The problem here is that the OS uses loop device nodes for apps moved to external storage and one for the system squashfs, and it only has enough loop device nodes for those purposes--any loop device nodes in /dev/block are already in use. On the assumption that you aren't going to have more than 253 apps moved to storage, we're going to create a loop device node numbered 255. If you like, you can check that there isn't already one with that number with
Code:
ls /dev/block/loop*
So, let's create the loop device node:
Code:
mknod -m640 /dev/block/loop255 b 7 255
Step 4. Create a mount point:
Code:
mkdir /mnt/myloop
Step 5. Mount myext2filesystem.img:
Code:
/data/local/bettermount -t ext2 -orw,exec,noatime,nodiratime,sync,loop=/dev/block/loop255 /storage/sdcard/myext2filesystem.img /mnt/myloop
Enjoy your new file system at /mnt/myloop !
You will have to repeat Steps 3-5 after every boot, or else you can make a script that runs every time you boot. You could simply put the commands for 3-5 into a Script Manager script set to run on boot, or there may be some better, more unixy way (but I haven't had any luck editing startup scripts).
What to do with your shiny new filesystem? Well, you could move not just apps but also their libraries to external storage (you can also do that by remounting your external storage in exec mode).
Click to expand...
Click to collapse
Which version of busybox were you testing with? I haven't had a problem with multiple loop devices...

I've been using the stock busybox: 1.7.2.
Do you use -oloop=/dev/block/loopNN to specify the device?
I just tried 1.16.0 from the Titanium Backup website. No luck. I created /dev/block/loop222. Then:
Code:
# /tmp/busybox mount -t ext2 -oloop=/dev/block/loop222 /storage/10.img /mnt/myloop
mount: can't setup loop device: No such file or directory
# bettermount -t ext2 -oloop=/dev/block/loop222 /storage/10.img /mnt/myloop
# (works!)
I also tried just plain -oloop, without the =/dev/block/loop222, and it didn't work.

arpruss said:
I've been using the stock busybox: 1.7.2.
Do you use -oloop=/dev/block/loopNN to specify the device?
I just tried 1.16.0 from the Titanium Backup website. No luck. I created /dev/block/loop222. Then:
Code:
# /tmp/busybox mount -t ext2 -oloop=/dev/block/loop222 /storage/10.img /mnt/myloop
mount: can't setup loop device: No such file or directory
# bettermount -t ext2 -oloop=/dev/block/loop222 /storage/10.img /mnt/myloop
# (works!)
I also tried just plain -oloop, without the =/dev/block/loop222, and it didn't work.
Click to expand...
Click to collapse
I can't remember if mount was symlinked to busybox at the time, but I just used the standard "mount -o loop disk1.img /mnt/disk". I may have even been on a custom kernel and had a crosscompiled mount, so good work, this is probably going to be a common problem for people.

The problem with busybox seems to be that it thinks /dev/block/loop0 is free, but it's not. Doing losetup -f returns /dev/block/loop0.

If you could mount the loopdevice in init.rc this would be the easiest way to expand the 300MB /data problem with archos.
Also it might be the best way in CM7 until its stable for the persistent Data between revisions.

fzelle said:
If you could mount the loopdevice in init.rc this would be the easiest way to expand the 300MB /data problem with archos.
Also it might be the best way in CM7 until its stable for the persistent Data between revisions.
Click to expand...
Click to collapse
I have had no luck adding anything to init.rc with the rw root.
Moreover, /storage and /storage/sdcard get mounted quite late in the boot process--late enough that I think one can't just move the /data directory there. I suppose one might be able to mount them earlier in the process, but I haven't been able to figure out how to run anything in an init script. If anybody knows how to do it, please speak up!
What one could do, however, is mount the loop from an app's on-boot notification, and then symlink individual app files.

It looks like with a better busybox than the one included with the device, one can also use losetup to specify the loop device--see here.

I built a full 1.18.5 version of Busybox, and it does loop mounting just right. You can replace Step 1 of my HOWTO with fetching my modified busybox and putting it in /data/local, from http://code.google.com/p/busybox-for-android/downloads/list
Then step 3 is not needed.
Step 4 should be replaceable with the very simple:
Code:
/data/local/busybox mount -orw,exec,noatime,nodiratime,sync,loop /storage/sdcard/myext2system.img /mnt/myloop
Or if you're pressed for time, and want to use default mount options:
Code:
/data/local/busybox mount -oloop /storage/sdcard/myext2system.img /mnt/myloop
But if you want to implement this is inside an app, depending on your license needs, you may want to use the longer method, since busybox is GPL while bettermount is Apache 2.