[Q] How to make a WWE BCR.exe recognize chinese business card - HD2 General

I have a Leo with WWE Asia 1.48 ROM
I copy the
BCR.0404.MUI
BCR.0409.MUI
BCR.0409.MUI
BCR.exe
from RUU_Leo_HKCSL_CHT_1.48.832.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship ( I make a cab to copying files to /window/ )
The program launch normally.
It can recognize english business card.
But when I try to recognize a chinese business card, it crash after I hit the "recognize" button.
please help ?

Related

I need help to repair my Qtek

Hello
I just did the following :
download the files from www.carrierdevices.com.au for Qtek 101 update
"Qtek 1010 Upgrade
(22102003-190723)-RSUv1.15_(GPRS_T32500_ENG).exe
File Contents
• CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
• Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
"
When the process began there was an error asking to press OK for restart.
After restarting device in the boot sequence ( when logo is diplayed) there are no informations about the ROM. Just Radion version is diplayed and that is the new version one (3.25)
Also on the display there is no start icon and I cannot use the display because it seems to be decalibrated completly.
Very Important : When I try to connect to Activesync after a while it telling me that the device is not a smartphone or a pocket PC and cannot be connected. So I cant use any program to try to upgrade again.
What to do ?
Please try to give examples and link to download files in order to fix my device.
Thanks in advance
Silviu C.
Hi ...
If you still can get to the boot loader screen (power button + soft reset) and it displays "GSM OK", that means there is a good chance that the flash ROM is not damaged.
You can either put the ROM and RSU files on SD card through a card reader (.nbf files) or to get a valid SD backup for CE + Radio from any working XDA and use the boot loader screen to flash your device again.
Good luck ...
thanks, where I can get some files?
Thank you for your replay,
It seems to be ok cause i can upload a new CE in SD format to the device. ROM was build in the kithcenROM from yorch.net.
It still not working cause perhaps I need the file containing Radio and CE as well in SD format.
Do you know where I can get it ?
I dont think I can get another device to read the files on the SD.
Many thanks,
Silviu C.
I 'm not sure which stage you are stuck with now ... if you can put CE image on SD card and flash it using the boot loader, that means you can boot your XDA and flash the RSU through a normal EXE file from yorch.net .... if this is not the case then you most propably have the wrong file format on the SD card.
Give more details plz
present situation
I am at the edge of disperation.
Steps of what I did :
1. Back up Boot and CE to SD and save them to HDD.
2. Build a CE from Yorch.net in nb1 format and write it to SD with an adaptor.
3. Flash the device with that specific file ( was just CE , not including bootloader)
Now, my pocket is like that:
It cannot been powered from the power button
It start when plug in the charger
I cannot go in bootstrap mode ( when procedure for activating is made I just got a small red flash from the LED)
I have to mention that I choose from the yorch options :" lock butons except power when the device is turned off "
So, now I cannot use the SD for try another flash image.
I cannot use activesync because it cannot recognize the device. Somthing is wrong in the header of the authorising string or something like that.
When I plug the USB cable, activesync is starting but after 10 secs a pop up telling me that the device cannot be recognize, it is not a smartphone or pocket pc.
I am stack.
Thank you
Silviu C.
another question
I have another question:
Is there anywhere - in situation that the problem with boostrap will be solved somehow - full flash containing both radio and CE ?
Thank you,
Silviu C.
some little success
I have suceded by entering in bootrap mode !!
It telling me that I have GSM ERROR
What to do?
IS there any way I can get a full flash for Qtek with radio and OS as well?
Thanks,
Silviu C.
In the boot loader screen, try to press the calendar button ... it should give you the GSM menu. Select "Reset" or "Turn off" and do a soft reset
Plz do NOT try band switching or "Calib/debug"!
It sounds like a failed radio stack upgrade, you can try copying the RSUpgrade.sa.CAB file to your SD card then run it from there.
You can get the RSUpgrade.sa.CAB file by using WinZip to extract it from the RSUv1.15_(GPRS_T32500_ENG)[1].exe file.
HTH

Who can give me their T-Mobile number so I can dl the upgrad

hi,
Sum1 here who a T-Mobile subscriber? I have a T-Mobile PocketPC that I need to unlock tho I'm not a T-Mobile subcriber. I need a T-Mobile mobile number to get the upgrade at http://www.t-mobile.com/products/handhelds/pocketpc/download_popup.asp
Or if someone already downloded the upgrade where can I download it without keying-in the mobile number? Thanks.
BTW, I have a question, if I download the upgrade, can I now use the XDAunlock.exe file here (is my ROM automatically updated)? My ROM version now is 3.14.40 ENG. I'm having trouble with the ROM updater here since im not linux literate.
Email me at [email protected]. Thanks a lot
I already downloaded the TMobile upgrade. Can somebody tell me if this upgrade will indeed upgrade my ROM to the correct ROM version with wirelss modem feature to I can use the XDAunlock.exe to unlock my xda? Thanks
The answer is NO, the latest TMO upgrade is 4.01.00 and it has no wmodem.exe application. If you need to unlock your device, go to www.xda-developers.com/XDAunlock/ and use the tool there.
If it doesn't work, try the kitchen at www.yorch.net and cook a new 3.17 based ROM and flash your XDA and unlock it, then you can upgrade to TMO 4.01.00 later.
BTW, the TMO upgrade affects the RSU part. So, unless you are a TMO user you better use the .nbf file only with either SD card or use the XDAtools to flash your device.
Good luck.
Hi Biso,
How can I "cook" a rom? http://kitchen.romanweb.com/kitchen/index.php when I go to that website, the only thing needed to be selected are the 3.17.03 ENG O2-Euro (6656 kB available) and XDA-developers AutoConfig data (113 kB) under it. and the unlocking option right? This wil be the first to use my pocket pc device, which option should I select under How would you like your ROM?
installer EXE
zipped NK.nb1 (SD-card flashing)
zipped NK.nbf (advanced users)
and should I do anything on the NBF header string?
Thanks man.
If I use the intaller EXE file, how will I "flash" it on my device? What are the differences between using the exe,nk.nb1 and nk.nbf? Thanks again.
I notice that above the page there is an indication, by default when I go to the page (without checking or unchecking anything) the top of the page states:
space in ROM: 6656 kB
used: 7729 kB
free: -1072 kB
*overload*
Should I limit my ROM on 6656 kB (meaning that I have to uncheck other options)? My deveice is an XDA 1. Thank you.
Hi ...
Yes, you have to uncheck some optional s/w till the guage line is "Green".
If you are not familiar with the SD method, just select the EXE type. It will generate a 15 MB exe file which you should download it to your PC. Connect your XDA to your PC throught the cradle and ActiveSync and run the exe file while the cradle is connected to the power supply and follow the instructions on the screen.
Good luck.
Thanks man for the quick reply.
Sorry I'm getting confused. Should I transfer the exe file to the device and run the exe file on the device?
Thanks again
The exe file runs from your desktop, your xda will need to be synced with your pc before running the exe.
Thanks so this is what I have to do:
First sync my device (cradle connected to the power supply) and after synching, run the exe file on my desktop computer (no need to transfer on my device or anything?). That's it?
Is this fail-proof? Will it not damage my device if ever there was an interruption or sumthing? How can I make sure that I can go fail-proof? Kinda worried coz I just got hold of my xda 1 (T-Mobile edition), I'm a palm user before. Thanks
BTW, my PocketPC Version is 3.0.12039 (Build 11178). ROM version 3.14.40 ENG. I don't know if my PocketPC is 2002 or 2003. I'll be using the yorch.net ROM (http://kitchen.romanweb.com/kitchen/index.php). All compatible?
ROM 3.14 is a PPC2002 one and all ROMs on Yorch.net is WM2003 except the 3.17 one.
Just to ensure it's a safe process, remove the SIM and SD card from the device and stop any running applications on your PC.
Good luck ...
Thans Biso. How bout a step by step guide? Pls pls pls? Id really appreciate it man.
Like
1. Sync the device (Power connected to the cradle)
2. Run the Rom Exe file
3. etc.
Just to be sure. BTW, is the exe file really just 150KB? Is that all I need to unlock my device?
Hi ...
There is nothing really needed more than what you just wrote:
1. Connect the XDA to the cradle and sync while the power is connected.
2. Run the EXE file and follow the instructions on the screen.
BTW, the EXE file should be at least 15 MB, seems your ROM was not "cooked" well .... try again
Ohh ok. I downloaded twice and all I got was 150kb. how will I know that the ROM i got is "cooked" well so I can be free of troubles. Can you just give me a link to the right/"well cooked" ROM? Thanks man.
One more thing, should I run the ROM EXE file while my device is synching or after the synch?
it's still 150 kb. Here's what it says when I view the log
./mkrom.sh: ../../kitchen.local/mkrom-inc.sh: No such file or directoryno files for configid 26220739Cannot fit files in given sectionsError splitting files
seems there is something wrong with the kitchen work space ... it happens sometimes ... no big issue.
You may try this kitchen as well http://lumpistefan.dyndns.org/
P.S: run the EXE file after the device is synced
which one should I pick? Pocket PC 2002 ROM or Windows Mobile 2003 ROM. And what's the difference. Sorry for my ignorance. Thanks for the replies.
Biso,
Can I use an MMC card for flashing? I MIGHT be able to borrow an MMC card. Also, I dont have a card reader but I have a digital camera which I can use to transfer the ROM image from my desktop computer to the card. Would you think it would work? Thanks again man.
will the exe file below work for me?
http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
and
http://www.xs4all.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
This is my Device's Information
ROM version: 3.14.40ENG
ROM date: 11/26/02
Radio version: 6.18
Protocol version: 324e4
Pocket PC Version 3.0.12039 (Build 11178) (Don't know if this is 2002 or 2003 pocketpc)
Pls reply. thanks
Hi ...
1. As the figure tells, WM2003 is the latest than PPC2002.
2. I can recommend to use TMO 4.01.00 as I have it on my device for almost 3 months now with no problems so far (few things have to be tweaked tho), but I heard good news about AT&T 30.09 ROM as well.
3. I can't confirm that MMC can replace SD card. I saw some threads on this but no final results.
4. The answer is NO, the only way to move the NBF file to the SD card is either a card writer or by using XDAtools with the XDA cradle. I don't think the card will be recognized by the bootloader otherwise.
5. SER-V12 is a PPC2002 ROM and useful only if you need to unlock your device (which I believe it's already unlocked).
No I just want to unlock the device, that's it I don;t really want a ROM upgrade, just so happens that I need to have a ROM upgrade to unlock the device
SO I can use the SER-V12? Thanks a lot.

sos

Dear All,
Is it possible to unlock the SIM on universal
Is tit possible to change the language on the phone from french to English
Can you please guide me on how to do the above as I dont speak french
Is it possible to save the current settings on the phone if the above fails
as the operator sayzs that the warrantz on the phone is void if the language is changed or the SIM is unlocked
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
I can help you change language from french to english.
Doesn't your Universal have a place where you can download the french ROM? If not, it is still possible to backup the french ROM. A little complicated, but i'm sure i can walk you thru the process.
Regarding the unlocking, i don't think it is possible at the moments. The geniuses are working on it but as of now, you can have it unlocked thru your provider. Just pay the fee (which i think is around 20-30€)
Dear Jorgee,
I would appreciatte if you can walk me htrough the language change, I have tried the provider which is orange switherland, that the lock is definite
A Bellah
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Dear Jorge
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
and I want to change into english
Which of the following ROM's would you like?
O2
QTEK
IMATE
Take note, flashing the ROM/Changing the language doesnt get rid of the SIM Lock
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
abellah30 said:
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
Click to expand...
Click to collapse
I guess if you want the fastest or newest? The fastest in MY opinion is the QTEK because it has few customizations. The newest I believe is O2 ROM
Regarding Phone configurations of Orange, the configurations are set thru a .CAB file which is stored in Extended ROM. All you have to do before changing ROM is to backup the extended ROM, then Flash the device to english, then run the CAB file that has the Orange customizations.
If you can give me a list of the files in your Extended ROM, i'll do my best to explain what each file does
Dear Jorge,
I guess I will use the same as youy which I thinkl would be the qtek.
Ok where do i get the programme to back upo the extended rom
Thanks
Backing up extended rom, have to install Total Commander. Then in total commander, type \EXTENDED_ROM which will show you the contents of the extended ROM. Just copy to the SD card and save in your computer, that's how you backup extended ROM
For backing up the OS ROM, refer to this thread as it was BUZZ that helped me find out what to do.
Its : http://www.buzzdev.net/index.php?op...=view&id=8573&catid=33&limit=15&limitstart=15
Just download the file at the bottom of this page (page 2) then continue on to page 3 and 4 which explains how to do it. Just PM me regarding where you are already and I will walk you thru the rest as I have already done the procedure
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
abellah30 said:
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
Click to expand...
Click to collapse
What command did you enter that caused you to get an error message?
go here ftp://xda:xdaftp.xda-developers.com/Uploads/Universal/Shipped ROMs and download UNI_Qtek_WWE_11364_151_10300_Ship.exe for the English ROM.
are you sure you don't want to backup your ROM first?
Just drop me a message if you get lost.
dos command
i want to back it up first but I am getting the folowing error on the dos command
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\> pdocread 0x0 0x3FA0000 QTEK.RAW
'pdocread' is not recognized as an internal or external command,
operable program or batch file.
Did you install EnableRapi on the PPC first before doing this?
THen you have to disable the USB connect option of ActiveSync,
Then enter Bootloader mode on yor universal,
then connect it to the computer,
then run the pdocread
is this what you did?
no I followed the articel your refered me to, I ran the enable rapi, then connected to the usb and then ran the programme.
I also tryed to download the qtek system but the link you gave me does not let me acess the site
you have to put xda:xda in the link as this is the username and password. Or use an ftp program to access the site, this might be easier
I put it in the bootloader state and still the same message
I put it in the bootloader state and still the same message, but the message on the article you refered me toi says not to do so, I have tried both methods and cantr seem to be able to get it done
Sorry, but i don't know what to say. Are you using the original cable?
Re: [AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1 (Mar07 RE-UP) | PIE QS-TOGGLE, Bat %
Jorgee said:
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Click to expand...
Click to collapse
Did you do a clean install and latest gapps?
Sent from my Nexus 4

XDA tools problem

hy there,
when i was updating a qtek1010 to wm2003SE rom, that was cooked in romkitchen, the upgrade stoped at 99%.
now i can only get into the bootloader.
bootloader version : 5.15
i've searched, and now i'm trying to upgrade from SD MMC, when i'm using OSImageTool.exe , i open the nk.nbf, destination SD MMC, then it displays this error, (NK.nbf:incorrect filesize(33554463), file should be exactly 32505888 bytes. error opening input file)
What should I do???
Thanks
Download an other ROM. THE NK.nbf-Fiel you have is the WM2003SE ROM. This file can not be written through XDA-Tools.
Download anoteher WM2003 or PPC2002 ROM, flash your device via SD-Card and the run the exe File of the WM2003SE-ROM.....
Stefan
thanks so much, it worked
but now, when i put the sdd in the qtek1010, on the bootloader nothing apears.. only :
WALLABY
Bootloader
V5.15
GSM OK
and when i press action button it displays a diagnostics list like "ram, display, touch etc..."
what am i doing wrong?
what can i do?
i've putted the sdd card in a HP photosmart to copy the .nb1 file.. is this wrong?
thanks,
Luis Martins Portugal
Looks like the ROM isn´t written correct to the card.
Otherwise it will show directly in bootloader that you can install the new ROM.
I´m nearly sure the HP Photosmart causes this problem. Do you have access to another SD-Card writer?
Stefan
ok, i'll buy a card reader and try again
thanks Stefan
i'll post here the results.
gretz
Just to ensure. You have copied the ROM using XDA Tools to the SD Card, or?
Normal paste & copy does not work......
Stefan

cooking czech ROM problems

I'm trying cook ROM in czech language (CSY). I cooked ROM based on WM 6.5.3 build 28205 with 0405.mui (CSY) and windows mobile boot no problem but after calibration display, EXTROM doesn't install so I haven't got some Acer utilities. And in Comm manager I haven't got Bluetooth and Wi-Fi. Bluetooth icon is in Settings but if I click on it, it wrote "Cannot start the Bluetooth stack". Anyone help me with this problems?
Extrom doesn´t install:
- Do you have extrom.bin in your Flash folder?
- Do you see any Error message that the installation of extrom.bin got aborted?
Do you have extrom.bin in your Flash folder?
Yes, I have.
- Do you see any Error message that the installation of extrom.bin got aborted?
No.
Sometimes the SD Card brakes the installation of the Extrom.bin.
Take the SD Card out and make the Hard Reset - Hold two Volume Buttons together with Power Button and Reset the device with the Stylus Pen.
Then report back if that worked.

Categories

Resources