plz help ! p3450 shows white screen with broken lcd a bottom but i am sure it didnot fell .it was working fine bu suddenly this problem came up.. what to do? plz help..
Sorry to hear that, but how do you expect us to help? develop a software to repair a broken lcd? You'll have to buy a new lcd screen and follow this http://forum.xda-developers.com/showthread.php?t=407323 or have it repaired in a shop.
Good luck!
but it didnt fall downa nd it is not broken it just shows broken like.,.
white screen of death
I have followed the method 'insert plastic sheet between processor and steel plate' for my phone automatically off. unfortunately white screen appears when switched on.soft & hard reset tried but nothing.please help!!!!!Thanks
Related
hay from today morning my htc touch shows a white screen and a crack on the bottom corner of the screen.i am sure that it dint fell down.
then what may be the problem?
anyone knows pls tell me...
white screen?
When you turn on your phone, there is no smart mobility.
Crack?
Is that an LCD problem?
i have the same problem with the WHITE SCREEN. bought my ELF 3450 second hand over the net. i am from the Philippines by the way and HTC units are not yet very common here and also the parts/accessories. it worked fine for about 3 months with minor problems such as Auto-Restart/Auto Power On/OFf which was solved using the "plastic on the OMAP chip method" - tnx for the forum for the info by the way and charging problems which was also solved by buying me a aftermarket charger. but recently the problem of AUTO OFF occurred again until it did not work at all. so, i tried to check the Plastic over my chip but to no avail the fone was dead. so, i decided to head to one of our local cellphone repair shops and have my OMAP heated thinking that maybe there are just contact points inside who became loose. when we tried to power on it was good for a few minutes then i noticed the screen went darker and darker and then it was all WHITE. we restarted it but it's just WHITE. tried to send messages and call it but there is no response from the fone. i'm afraid i toast it bad or may be it's just the LCD who got toasted, i am clueless.
CAN SOMEBODY PLEASE HELP ME WITHMY PROBLEM. CAN I GIVE LIFE BACK TO MY ELF? WHAT'S THE CHEAPEST & BEST SOLUTION TO THIS? THANX ...
Generally white screen problem are caused by defects in flex connecting the LCD to the mainboard or the connector itself. Try to disconnect and reconnect the LCD, if doesn't work - replace the LCD.
kimberhunt said:
i have the same problem with the WHITE SCREEN. bought my ELF 3450 second hand over the net. i am from the Philippines by the way and HTC units are not yet very common here and also the parts/accessories. it worked fine for about 3 months with minor problems such as Auto-Restart/Auto Power On/OFf which was solved using the "plastic on the OMAP chip method" - tnx for the forum for the info by the way and charging problems which was also solved by buying me a aftermarket charger. but recently the problem of AUTO OFF occurred again until it did not work at all. so, i tried to check the Plastic over my chip but to no avail the fone was dead. so, i decided to head to one of our local cellphone repair shops and have my OMAP heated thinking that maybe there are just contact points inside who became loose. when we tried to power on it was good for a few minutes then i noticed the screen went darker and darker and then it was all WHITE. we restarted it but it's just WHITE. tried to send messages and call it but there is no response from the fone. i'm afraid i toast it bad or may be it's just the LCD who got toasted, i am clueless.
CAN SOMEBODY PLEASE HELP ME WITHMY PROBLEM. CAN I GIVE LIFE BACK TO MY ELF? WHAT'S THE CHEAPEST & BEST SOLUTION TO THIS? THANX ...
Click to expand...
Click to collapse
You warmed the OMAP? Interesting....
This problem sounds really complicated.
And im quite surprised of your 'warming' method.
I've had the exact same problem combined with the fact that my touch was resetting constantly. I was about a minute away from throwing it out of the window when I tried the plastic-piece-on-omap processor-technique described in one of the threads here. It solved the rebooting problem, but not the white screen issue. After a very frustrating couple of days where the screen started to blink and shake and then eventually turned to white alltogether, I lowered my brightness to the second stop from start, and since then I haven't experienced the white screen anymore. I believe it is heatrelated.
Whilst not being a full solution to the problem, at least it renders the phone usable.
Hope this helps anyone.
Heating the device very seldomly solves anything, but causes more problems that you originally started with.
iam using htc touch (p 3450) for nearly 18 months . (bought & using it in india ) my hand set fell two times in water and about 15 times fell on the floor (from shirt pocket) . still its working fine .
and iam using "opera mini " for browsing the internet . for some sites iam using "opera mobile " . when iam on opera mini , continueously for long ours , suddenly it turns white . never come to normal screen unless restarted . but it happens sometimes , may be because of memory or heating up of some H/W .
Hi hotchamo,
my htc touch elf hat a similary issue, and my father just "wringed" it gently until the white screen disappeared. You should try it carefully, since it may help and it won't harm. Just take in in both hands and turn them in the opposite direction, so that the case gets slightly twisted.
If that doesn't help you should open it and check the LCD flat cable connector...
Best regards,
scheutak
Again - flex connector problem. 'Wringing' it gently will eventually result in your LCD cracking, by all means - go for it, it will solve your white screen problem. Permanently.
i have a new gene and i used to have a problem of blue dots coming in middle of my screen and unfortunately my screen got damaged and i got it replaced from htc service center but still my phone shows some blue dots in middle and when i asked the htc people they said it is caused due to heating of screen and get reflected as blue dots (non repairable) is their any way to solve it please help :
as i think if this is problem from overheat of lcd then change whole lcd unit and it will be solved.
im having a problem with my htc gene (p3400) the touchscreen is not responsive but the keys are still working....... need help on what to do beside of getting this phone to a service center..... will appreciate if someone help....
DAMN! no one is replying to my post!
ok ok do anyone think i should change my LCD?? on my p3400?
hahaha once again a day have past and no one is replying.........
should i replace my p3400 lcd but the old lcd is stil functioning the thing is the touch doesn't work......... if anyone please...... i need your guidance! hahahaha
[email protected]#K it's almost 1 week damn! still no reply!
thinking of changing the lcd for a change hahaha [email protected]#K all those who view and doesn't even reply damn you all!
listen what happend to ur gene,so ur not able 2 interact thru LCD....?
yeah i cant interact with the LCD means i cant use the touchscreen features but i can read messages and receive calls....... the keypad and the LCD is still working but not the touchscreen....(atLAST! someone is willing to help....!)
did ur gene droped any where,or any incident with LCD....if so then plz let me know......coz there is a thin layer of plastic in between one liquid is there.....if this is damaged no 1 will help u & any circuitary damage also cause 2 failure of LCD screen......if ur gene is under warrenty plz change it for free.....
try to get to the settings and reset your device...
If it still doesn´t work... your touchscreen is broken and you will have to change it
I had same problem. For me there was a piece of dirt between the screen and the cover which was causing the screen to be pressed. I removed the cover and cleaned the dirt from around the frame and the screen is now working. Hope this helps
i didn't drop my gene......... and how could i clean the digitizer of it?
Hi guys,
hopefully somebody can help me with the problem I have with my beloved HD2. I've successfully replaced the digitizer within my HD2. My problem is though, that the phone only boots when it's not in its housing. When I take the mainboard out of the phone's housing, the phone boots just like it should. But as soon as I put the mainboard back in, the phone doesn't boot, it only vibrates and then shows a black screen (with the backlight turned on).
Any ideas on this? I'm kinda desparate right now . Any help is highly appreciated.
Thanks in advance
propably bad used screen without scratches! happened same.. just digitizer dont working when in housing..
HD2
HD2 the best of the best
May a bad cable connection be the reason?
Or a slack joint?
- Discover "Bosnian Pyramids" on you smartphone and tablet devices;
hi
hi i too have the same problem i spent 3k to change its display and touch pad and now he sasys theres a problem with a strip and demanding 1k . now i feel like thrashing the phone . dies any body know the solution for this ... it boots magldr and then showsup android logo and restarts this is what it happens continuosly
My lcd goes brown color day by day plz help
Factory reset first.
Yes bt same
What model is it .
Looks like you need a new digitizer .