Related
So here is the deal.
I wanted to upgrade my phone to 2.1 or cyanogen..
I downgraded it to 1.5 via the nbh file.
I cant access recovery mode. They system gets stuck at the my touch screen.
Adb gives server outa date
fastboot devices. >recognizes the device.
when i do the fastboot boot then remote not allow.
Cant make a glodcard since i cant connect to adb
What do i do?
P.s. I have all kinds of drivers. Tried in any possible driver.
Mod. edit: not dev related, moved to general
hi my screen wont come on on a htc hero!! the phone is on and my pc recognises my htc being in adb bootloader the phone has a light on to say its charging but everything else seems dead now there is no data on the phone i want to keep, but i would like to get it working and i think i need to install the firmware again but i have to do it using fastboot can anyone help me?
Are you using official 2.1 or a rom?
s.watling said:
hi my screen wont come on on a htc hero!! the phone is on and my pc recognises my htc being in adb bootloader the phone has a light on to say its charging but everything else seems dead now there is no data on the phone i want to keep, but i would like to get it working and i think i need to install the firmware again but i have to do it using fastboot can anyone help me?
Click to expand...
Click to collapse
When in fastboot, check what SPL/bootloader version you have. That tells us what we can do. Likely (if it's 004), then you can simply
fastboot boot AmonRARecovery1.7.0.1.img (or whatever you call it) and get your recovery image booted. From there, flash a ROM, and reflash recovery using the adb command "adb shell flash_image recovery /sdcard/recovery.img" after putting recovery on there.
Check bootloader version first though
pulser_g2 said:
When in fastboot, check what SPL/bootloader version you have. That tells us what we can do. Likely (if it's 004), then you can simply
fastboot boot AmonRARecovery1.7.0.1.img (or whatever you call it) and get your recovery image booted. From there, flash a ROM, and reflash recovery using the adb command "adb shell flash_image recovery /sdcard/recovery.img" after putting recovery on there.
Check bootloader version first though
Click to expand...
Click to collapse
how do you check the spl/bootloader version as i have absolutley no display on my phone!!
what do i type in termainal
i was using modaco custom firmware but would ideal like to get it back as standard uk orange!!
Right, get a recovery image, and try to fastboot it, and just see if it works.
If you don't see the spl though,then I think you have a hardware issue.
You could also try an RUU.
hi i have a nandroid backup of the phone in fastboot i can flash the boot.img the data.img but when i try flshing the system.img it says remote data length is too long
any ideas
Hi guys, I'm a newbie. I wanted to know, how can I flash my os from 2.1 to 2.2 .
The main problem is - I dont understand how does the fastboot works. there are img. files. What should I do with them ?
THANK YOU VERY MUCH FOR YOUR USEFUL REPLIES!
do you have rom with fastboot?
do you have fastboot already installed to your pc ?
when yes ,then run these command on androidSDK :
Code:
fastboot.exe flash system system.img
fastboot.exe flash boot boot.img
fastboot.exe reboot
but when not :
you have install AndroidSDK and fastboot items and gt540 drivers.
how can I install fastboot rom ?
I read some information, got the links, but I dont understand how to get that rom on my phone.
I understood, that i will have to reflash my rom, cause I have 2.1B baltic, and there's no fastboot on it. Is there any chance that I can install fastboot seperatly?
Look when you reflash with another 2.1 you wont notice anythings changed. It keeps your data. When done just turn phone off then switch on with power and camera held together until a blank screen. Thats fastboot.
Plug phone in whilst on black screen then follow the fastboot instructions in 2nd post
Sent from my GT540 using XDA App
Which rom do you suggest ?
And it would be very great, if you would link the download. Cause I don't wanna **** up system.
pashinator said:
When done just turn phone off then switch on with power and camera held together until a blank screen.
Click to expand...
Click to collapse
I installed a fastboot ROM, then installed the openswift 2.2 ROM last night, and fastboot mode was hold volume up + search while powering on on my gt540f. Camera went into download mode for me.
Hi all,
my nexus wont start after (failed?!) flashing with factory image. bootloader and recovery mode are accessable. i have no backup so i need to flash a new img, but my tablet wont be recognized by my computer anymore(adb drivers not working?!). i tried to deinstall and reinstall the adb drivers alrdy. Device manager shows nexus 7 as Android Phone with "Android Bootloader interface" i cant install adb drivers while in bootloader. in recovery mode i succeeded installing the adb drivers and the tablet is shown correctly in device manager... i need help dont know what to do :crying: .. any suggestions ?
ADB and fastboot drivers are different.
Pirateghost said:
ADB and fastboot drivers are different.
Click to expand...
Click to collapse
yes .. what are u trying to tell me? dont get it.. i used nexus root toolkit to help me apply those drivers.. but it wont work for bootloader/fastboot mode.. i cant flash my tablet because my device wont be recognized by my pc.. im stuck at the bootloaderscreen/fastbootmode....
http://bit.ly/Zqk7pm
and what do u want me to type in there ? i alrdy used google for the last 7 hours ?
oads said:
and what do u want me to type in there ? i alrdy used google for the last 7 hours ?
Click to expand...
Click to collapse
SMH
i filled it in for you.....
Pirateghost said:
SMH
i filled it in for you.....
Click to expand...
Click to collapse
ok sry wasnt patient enough to see... ya well this all makes sense to someone who knows what hes doing but to a noob like me? i thought i alrdy installed fastboot drivers since i unrooted the device a month ago? do i need to deinstall the driver "Android Phone with "Android Bootloader interface"" in device manager first, before applying the new fastboot drivers? pls help me through this i think i damaged enough alrdy ..
no. ADB and fastboot require separate drivers. just install the drivers required for n7 fastboot. there was a link in that list.
there are tutorials here on xda, as well as youtube videos and tutorials on other sites. take a little initiative and learn the ropes. it will help you out later on.
oads said:
ok sry wasnt patient enough to see... ya well this all makes sense to someone who knows what hes doing but to a noob like me? i thought i alrdy installed fastboot drivers since i unrooted the device a month ago? do i need to deinstall the driver "Android Phone with "Android Bootloader interface"" in device manager first, before applying the new fastboot drivers? pls help me through this i think i damaged enough alrdy ..
Click to expand...
Click to collapse
Just relax and take your time.
If your tablet can go into fastboot mode, it is fine and will get better; the only thing standing between it's current state and being brought back to life is a little learning on your part.
Now you see what the problems are with using a toolkit - because they hide all the gory details from you, when the smallest thing goes wrong you are totally helpless due to a lack of understanding about what things are going on underneath the hood. And as it turns out, what "goes on under the hood" isn't really all that complicated either if you do things the full manual way.
Which is not to say that you can not simply just use the toolkit again; if you previously successfully installed drivers that allowed you to talk to the tablet in all of these modes:
- fastboot
- adb w/ custom recovery booted
- adb with Android booted
then it is not evident that you need to be fooling with drivers.
I suggest you read this thread, from start to finish
[GUIDE] Flashing a Factory Image with fastboot / return to stock
Then, go over to your toolkit thread and read it from start to finish. You will see that there are & have been plenty of people in circumstances nearly identical to yours.
good luck
hey thx for ur replies! im a lil more calm now than i was 30 min !
the big problem i still have is that my tablet will show up as Androidphone/Android Bootloader Interface not as an unknown device or as the Nexus 7 it is when i plug it in.. so i cant install the drivers am i correct? well i tried it a few times .. deinstalled and reinstalled .. the problem persists? anyone familiar with that? when i change into Recovery Modus it will show up as Androidphone/Google Nexus ADB Interface.. so my first steps to get rid of this mess would be ...?
oads said:
hey thx for ur replies! im a lil more calm now than i was 30 min !
the big problem i still have is that my tablet will show up as Androidphone/Android Bootloader Interface not as an unknown device or as the Nexus 7 it is when i plug it in.. so i cant install the drivers am i correct? well i tried it a few times .. deinstalled and reinstalled .. the problem persists? anyone familiar with that? when i change into Recovery Modus it will show up as Androidphone/Google Nexus ADB Interface.. so my first steps to get rid of this mess would be ...?
Click to expand...
Click to collapse
that does not sound like a problem to me at all.
You communicate with the device using the "fastboot" program when it is in bootloader/fastboot mode, and with the "adb" program when it is in custom recovery boot.
What you see in the device manager appears to be completely normal - In different modes it shows up in different places. It's not supposed to show up with the same driver in different modes.
Code:
fastboot devices
will show you whether you are communicating successfully with the device when it is in bootloader/fastboot mode, and
Code:
adb devices
will show you whether you are communicating successfully with the device in recovery mode.
I suppose your toolkit has some stoopid menu or buttons someplace that will allow you to test for exactly the same thing. Now all you need to do is stop posting here and read a little bit.
good luck
bftb0 said:
Now all you need to do is stop posting here and read a little bit.
good luck
Click to expand...
Click to collapse
well i did read quite a lot today :crying: i cant find my device when i type in adb devices, im pretty sure i have the right drivers installed since i followed the instructions step by step.
this guy seems to have the same problem: http://forum.xda-developers.com/showthread.php?t=1808076
could someone tell me if this could be a possible solution :http://stackoverflow.com/questions/...e-over-usb-via-adb-devices-from-windows-7-x64
also would it be possible to just get into the bootloader (since thats the purpose of adb drivers and i can do this) and just proceed with fastboot commands ? if i type in fastboot devices the tablet will show up...
In your first post, you indicated that you couldn't connect to the tablet that was in bootloader mode with adb.
And then you were told - once vaguely and once quite specifically - that *nobody* can communicate with the tablet using adb when the tablet is in bootloader/fastboot mode.
As stated previously, use the "fastboot" program when the tablet is in bootloader mode, and use the "adb" program when the tablet is booted to the custom recovery (or the regular android boot if USB debugging has been enabled).
You can use either one of these modes to effect a rescue so long as they are working correctly - they don't need to both be working. Eventually you would want that to be the case, but for the moment why don't you just stick with what is working for you.
If you get a device ID printed when you execute "fastboot devices" when the tablet is in boot loader/fastboot mode, that is all you need to reinstall a factory ROM, using nothing but fastboot.
thx for pointing me in the right direction! so i started flashing with the fastboot commands... as soon i get to: fastboot flash radio radio-tilapia-1231_0.17.0_1025.img
i receive:
error: cannot load 'radio-tilapia-1231_0.17.0_1025.img': No error
any clues? thx in advance
edit:using 4.2.2 factory rom for nexus 7 3g
oads said:
thx for pointing me in the right direction! so i started flashing with the fastboot commands... as soon i get to: fastboot flash radio radio-tilapia-1231_0.17.0_1025.img
i receive:
error: cannot load 'radio-tilapia-1231_0.17.0_1025.img': No error
any clues? thx in advance
edit:using 4.2.2 factory rom for nexus 7 3g
Click to expand...
Click to collapse
Well, I can't see what instructions you are following, and there is a possibility of sensitivity to an exact sequence. In particular, is a
fastboot reboot-bootloader
performed after the bootloader is flashed, but before the radio is flashed? It might be important that you are performing the radio flash from one bootloader vs. the other. Just a guess. (Along the same lines, do you see something unexpected happening, such as a boot to the recovery after the radio flash command?)
There are some other threads on this I think. (I have a grouper device not tilapia) But I thought that those threads were about problems with radio flashing when a custom recovery (rather than a stock recovery) was on the phone, but that was for applying the OTA package for tilapia rather than flashing directly from fastboot.
-------------------------------------------------------
[Edit] whoops, wait a minute.... "cannot load"
When you run fastboot from the command line, the file names you give are relative to the current directory. Did you move those image files into the same directory that you are executing the "fastboot" command from?
Alternately you can specify the full pathname to wherever you unpacked the files, for instance
fastboot flash radio C:\myfolder\unpacked\googlen7\4.2.2\radio-tilapia-1231_0.17.0_1025.img
hi! basically im following this guide http://forum.xda-developers.com/showthread.php?t=1907796!
GSM/HSPA+ devices (nakasig)
Code:
> fastboot erase boot
> fastboot erase cache
> fastboot erase recovery
> fastboot erase system
> fastboot erase userdata
> fastboot flash bootloader bootloader-tilapia-4.18.img
> fastboot reboot-bootloader
> fastboot flash radio radio-tilapia-1231_0.17.0_1025.img
> fastboot reboot-bootloader
> fastboot -w update image-nakasig-jdq39.zip
its all good till i want to flash the radio. The .img is in the correct folder, just tried it again... could it be broken? should i try a other factory update like 4.2.1?
oads said:
hi! basically im following this guide http://forum.xda-developers.com/showthread.php?t=1907796!
GSM/HSPA+ devices (nakasig)
Code:
> fastboot erase boot
> fastboot erase cache
> fastboot erase recovery
> fastboot erase system
> fastboot erase userdata
> fastboot flash bootloader bootloader-tilapia-4.18.img
> fastboot reboot-bootloader
> fastboot flash radio radio-tilapia-1231_0.17.0_1025.img
> fastboot reboot-bootloader
> fastboot -w update image-nakasig-jdq39.zip
its all good till i want to flash the radio. The .img is in the correct folder, just tried it again... could it be broken? should i try a other factory update like 4.2.1?
Click to expand...
Click to collapse
I would complete the rest of the steps first and see if everything is still working. Your device *should* still work just fine with an old radio firmware. (Boot it up and see what radio firmware the OS reports on the Settings... about device... status page).
I'll pull down the tilapia image and tell you what MD5 I observe for the radio image.
just to verify, you actually have the 3g/4g model? or just the wifi only model. if wifi only, there is no radio
Pirateghost said:
just to verify, you actually have the 3g/4g model? or just the wifi only model. if wifi only, there is no radio
Click to expand...
Click to collapse
yes
SHA1
0798439d363beb145d9223a42ed9edf3de1a30f4 nakasig-jdq39-factory-0798439d.tgz
bb824d449f44d2ad43c5d2a463fe1244d2faf525 nakasig-jdq39/radio-tilapia-1231_0.17.0_1205.img
f406ae9133c56200306d5c7d64d151f21e0be3c4 nakasig-jdq39/image-nakasig-jdq39.zip
MD5
ee8db1ed6ff1c007fe12136d4bc65cd8 nakasig-jdq39-factory-0798439d.tgz
276cb738e5b9e18a088b6a3eef8155ad nakasig-jdq39/radio-tilapia-1231_0.17.0_1205.img
4cfa996b6513a7fa53db7cbfd1134396 nakasig-jdq39/image-nakasig-jdq39.zip
radio image is 16,777,216 bytes long
---------- Post added at 05:43 PM ---------- Previous post was at 05:40 PM ----------
the google - provided instructions (flash-all.sh) have 10 second sleeps after the bootloader resets - are you waiting long enough?
fastboot oem unlock
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
fastboot flash bootloader bootloader-tilapia-4.18.img
fastboot reboot-bootloader
sleep 10
fastboot flash radio radio-tilapia-1231_0.17.0_1205.img
fastboot reboot-bootloader
sleep 10
Also - something to check since you are rebooting the bootloader - does the device show up correctly in the Windows device manager? (Sometimes with soft reboots I have found the need to pull the USB cable and plug it back in to the PC).
Hi,
Today I wanted change my recovery. I had the Lineage OS recovery, but i was trying to install the twrp recovery.
So, the guide of twrp says that you should boot the twrp via fastboot boot twrp.img and install via the booted twrp. But I mistaken the command and I wrote fastboot flash boot twrp.img, I tried to reboot and the device booted himself in fastboot with the enter reason "error boot prepare" and I can't boot into the system or recovery.
I tried to flash the official image downloaded from the Google Developers website, but when i run ./flash-all.sh, console get stuck. I waited for about 15 minutes but nothing. I tried even the official Android Flash Tool but after 10 seconds it says "Your device stopped responding. You may have to select restart in the bootloader menu in order for it to be recognised again."
Does anyone know how to help me? Thanks in advance.
GioPan_ said:
Hi,
Today I wanted change my recovery. I had the Lineage OS recovery, but i was trying to install the twrp recovery.
So, the guide of twrp says that you should boot the twrp via fastboot boot twrp.img and install via the booted twrp. But I mistaken the command and I wrote fastboot flash boot twrp.img, I tried to reboot and the device booted himself in fastboot with the enter reason "error boot prepare" and I can't boot into the system or recovery.
I tried to flash the official image downloaded from the Google Developers website, but when i run ./flash-all.sh, console get stuck. I waited for about 15 minutes but nothing. I tried even the official Android Flash Tool but after 10 seconds it says "Your device stopped responding. You may have to select restart in the bootloader menu in order for it to be recognised again."
Does anyone know how to help me? Thanks in advance.
Click to expand...
Click to collapse
Do you have tryied to run the official google tool in Windows to try to rescue it?
Estebiu said:
Do you have tryied to run the official google tool in Windows to try to rescue it?
Click to expand...
Click to collapse
Yes, I wrote in the post, I tried both the command line tool and the chrome version. Btw i'm on linux
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
GioPan_ said:
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
Click to expand...
Click to collapse
I'll try this...
GioPan_ said:
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
Click to expand...
Click to collapse
Does this work if adb not working? I only have fastboot.
WriteLovey said:
Does this work if adb not working? I only have fastboot.
Click to expand...
Click to collapse
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
GioPan_ said:
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
Click to expand...
Click to collapse
I'm not certain I understand what you mean by PC authorized? I'm using a Windows 10 tablet. When the phone is attached to the computer it sees it as a device that can be disconnected through USB.
WriteLovey said:
I'm not certain I understand what you mean by PC authorized? I'm using a Windows 10 tablet. When the phone is attached to the computer it sees it as a device that can be disconnected through USB.
Click to expand...
Click to collapse
All is well. I'm back on my Pixel, yeah!
GioPan_ said:
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
Click to expand...
Click to collapse
I just had an encounter with this. I was rooting my device (Pixel 3A) and messed up my partitions through accidentally attempting a downgrade which broke all my ****. I was unable to easily reset this device to factory, so it took me several days to figure out and root. I'm getting better though as a hacker, because a year ago this would have taken me a month.
I was able to enter recovery mode (lying down Android, NO COMMAND). From this recovery mode, adb devices -l recognized my device, although I was unable to get a shell.
At first, ADB was telling me the device was authorized, but I messed with a bunch of other stuff (tried to flash a bunch of different partitions and monkey around in general trying to install Magisk) and then ADB started telling me it wasn't authorized when I used devices -l.
Once it said unauthorized, I was unable to issue the device any commands with ADB, so I just used hardware keys to get into recovery mode. From there, I selected OTA update, and it got into sideload mode. At that point, I used adb sideload with the OTA package that I downloaded here https://developers.google.com/android/ota
^^^ That operation did successfully restore my device to factory
This following guide here describes the details of how to use hard keys to enter recovery on this phone (don't download anything from there tho, and make sure your adblock is on)
How to Hard Reset your new Google Pixel 3a [Tutorial]
In this article, you will learn how to start your Google Pixel 3a up into the Recovery Mode and perform the Hard Reset to make it work perfectly again.
thedroidguy.com
I just wanted to say, I've been wrestling this hardbrick for a couple of days with my Pixel 3a.
I've finally overcome it by sideloading the most recent OTA update after using a hard key combo to get into recovery mode. The hard key combo is hold Power Button, tap Volume Up, then release both. Then, all you need is to use the command:
adb sideload <OTA.zip>
^^^OTA wasn't the actual filename though, you can download OTA packages for Pixel 3A here: https://developers.google.com/android/ota
the OTA binaries are NOT the same as the factory images, which is here
Factory Images for Nexus and Pixel Devices | Google Play services | Google for Developers
developers.google.com
Sideloading the OTA package brought my phone back from only having fastboot and recovery mode, even when flash-all.sh from the official downloaded firmware failed. Now I know how to undo damage that I cause by rooting this thing. Since I sideloaded newest firmware, it was also like applying an update. I easily got root after that, and I've logged the process. I'll make it into a guide soon
I'll just note that if you accidentally flashed the TWRP boot image instead of simply booting into it, I believe all you have to do is flash the stock boot.img to fix the problem. Obviously you can sideload the entire rom image, but that shouldn't be necessary.
Using the Windows computer (or whatever computer you are sending ADB commands from), download the full stock image directly from Google. Unzip it and then upzip the folder inside. You should find the boot.img file inside that folder. Take that file and then flash it to the phone using the normal ADB command: fastboot flash boot boot.img
While I haven't tried this myself recently, it should work in theory. The command "fastboot flash boot twrp.img" flashes the boot partition with a non-working twrp image, so replacing the faulty image with the stock boot.img should fix the problem.
If I did the same I would first attempt to manually put device in bootloader/aka fastboot mode then fastboot flash the stock boot.img , sudo fastboot flash boot boot.img --slot all
I only read the op (first post here);but I betcha that would have worked. Then sudo ./flash-all.sh and let it do it's thing.