Database Users

help with my imate kjam

hi,
im a noob to this forum and pocket pcs and i think im doing something wrong but when i try to install mfrazzz's xda mobile 6 release 5 final. i its still the same old windows mobile 5
i think my cid is unlocked i followed the instructions given by farias thread.
how would i know if the cid is unlocked? i tried using mestrini's WST tool but i get an error.
thanks in advance

thanks for the help

7331ymerej said:
hi,
im a noob to this forum and pocket pcs and i think im doing something wrong but when i try to install mfrazzz's xda mobile 6 release 5 final. i its still the same old windows mobile 5
i think my cid is unlocked i followed the instructions given by farias thread.
how would i know if the cid is unlocked? i tried using mestrini's WST tool but i get an error.
thanks in advance
Click to expand...
Click to collapse
Always post vital data of the phone,untill it's not known which device you have,G3 or G4,it's hard to provide with any help.Post IPL SPL of your device.
If it's a G3 then its CID locked,you have not followed the correct unlocking procedure.Read the Guide and sticky by Dr.Puttingham and follow it correctly to CID unlock the phone.
If it's a G4,then you cannot straight away flash any Rom to it,to upgrade follow the method as Sticky 'SoftSPL or HardSPL' by equinox in G4 forum.
What error it gives while usung WST 4.2 Tool ?
Cheers !

i have a g3, and the ipl: 1.01 (becuase i downgraded because the instructions told me to) SPL : 2.16
and the wst tool give me a "in the rexx script named : at line number :2840"
and is there a way i can change me ipl back to 2.16? cause nothing is working for me =/
thank you for your response

7331ymerej said:
i have a g3, and the ipl: 1.01 (becuase i downgraded because the instructions told me to) SPL : 2.16
and the wst tool give me a "in the rexx script named : at line number :2840"
and is there a way i can change me ipl back to 2.16? cause nothing is working for me =/
thank you for your response
Click to expand...
Click to collapse
ok, you got ipl 1.01 cuz you downgraded with Button's Rom 1.05 but your spl remained unchanged 2.16,its nothing to worry about,it sometimes take a little more tries to downgrade spl to 1.01,flash the Button's Rom 1.05 a couple of more times to make both ipl/spl 1.xx,only then you can CID unlock the phone with lokiwiz 02b.Follow the guide for downgrading and unlocking at the below link and do the method correct.Your phone is still CID locked,untill you get your phone CID unlocked you can not upgrade to any wm6 Rom.
http://forum.xda-developers.com/showthread.php?t=285435
But if you want to go back to your original wm5 Official k-jam Rom and have ipl/spl 2.16,then Download official k-jam Rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from official website of i-mate k-jam or from the following link below:-
ftp://ftp.clubimate.com
1.unzip the Rom zipfile,get your phone into bootloaders screen (multicolored screen)by pressing and holding down the camera button and the Power ON button together,the phone will start in bootloaders(multicolored screen) it'll show you ipl 1.01/spl 2.16
2.when in bootloaders,connect your phone with pc via usb cable, a small usb written will appear at the bottom of the multicolored screen of your phone.confirm it.
3.open the unzipped folder of the downloaded Rom,run the RUU icon in it(double click Ruu.exe)
4. follow the instructions and flash the Rom,after completion,your phone will restart and start working.
Good luck !

thank you sooo soo much, im gonna try it again right now

i guess my phones SPL will not change. i must of flashed the ROM with buttons 1.05 about10 times but it still wont change .... oh well im just gonna go back to the stock rom my kjam is WEIRD haha

Please Help
Hello
I have the Kjam G3 (with IPL & SPL 2.16) & wm5. I want to upgrade to wm6.1 but the CID is locked. I tried the WST tools and followed the instructions to unlock the CID but nothing happened.
Please can any body help me to solve my problem and tell me any other way to unlock and where to download the wm6.1.
THANK YOU

READ the FAQs, they hold all of the answers that you need.

htc 8125 question and help

Hi i have 2 part question my phone is an htc 8125 cingular sim card unlocked phone it has windows mobile 5 on it and i have the IPL 1.05, SPL.3.08 on it.
I did this but installing the IPL_SPL_3.08 rom. Anyways Im trying to get it back to IPL 1.05, and SPL 1.05 by installing the button rom and i seen the beer screen and it loads up to windows mobile 5 but keeps staying at IPL 1.05, and SPL 3.08 is there away to get it back to 1.05,1.05. I tried a few methods but aint working. Would keep reflashing a few times with the button roms get it back to 1.05,1.05. I tried with, newromupdateutility_wizard_noid. and didnt work i tried with rom update and didnt work. When a rom loads up and gets stuck at 99% and then i get a message with activesync saying lost communication error message whats does that mean and it saying try restore.
Also can windows mobile 6 with touch flo install on this phone or no. I was tring to do that with but all i got was it going back to windows mobile 5 and doesnt upgrade to wm6. Do i first need it to get it back to 1.05,1.05 using the button rom then use ,lokiwiz02b to do the unlocking(mind you my phone is all ready sim unlocked). and then flash a t-mobile or cingualr rom and then do the update with a windows mobile6 rom.
Whats a good windows mobile 6 with touch flo that works good on this phone can u maybe post a link
thanks for the help

deleted for inaccurate information

First,you shud have CID unlocked the phone prior to upgrading to 3.08 bootloaders,cuz it becomes very difficult and frustrating to downgrade from 3.08 to 1.xx.Now the only way is to first try to downgrade to 2.xx by flashing the official carrier's rom and when completed downgrade to 1.xx through Button's 1.05.You can only CID unlock the phone,if its 1.xx,which you already know.
Secondly,it'll only upgrade to wm6 if its cid unlocked.Try to flash ipl/spl 3.08 again and make both ipl/spl 3.08 first and then downgrade to 2.xx by flashing the official stock rom,it might work.
Cheers!

Bootloader gone ???

I have a Herald 100, wanted to upgrade to WM6.1, Originally had IPL 1.08.001 and SPL 1.08.001, did Hard-SPL 4.7 as per Instructions, Phone switched off and never restarted, went into Bootloader and showed me IPL 1.08.001 and SPL 4.7 Yan then I soft-reset and now its dead wont even go into Bootloader anymore. Any one can help ???

you aren't supposed to HardSPL with an spl less than 4. You may also need a higher IPL, but i'm not sure.
I've also heard reports that even with the 1.08.001 IPL and SPL, HardSPL still works.
So... to answer your question
1. try charging your battery
or
2. keep trying you might get lucky someday
or
3. you've utterly destroyed your phone and theres nothing else you can do

I get into the Bootloader again, IPL is 1.08.001 SPL is 4.7 Yang, tried with RUU 5.4 but Phone dies after 1% and i get Error 262. Do I have to install RUU 1.8 which was on originally now ??

i'd try it, but i don't know if it'll work
hardspl modifies the SPL, which is what controls the cid lock. my guess is that the lower spl doesnt quite accept the same instructions, which is why it doesnt work.
there are some threads about people who've made the same mistake and recovered their phones. look at those.

I can help you, contact me by PM
ps. Thanks for erase my last post

hey tramuyo, how exactly did you do it? There's been an increase in the amount of people that this happens to, and i'd very much like to have an answer and you seem to be the expert on this.
ps. whats that about erasing your last post?

Did you tried remove HardSPL?

Almost forgot, what model? Language? and make? You may need to restore the original rom to unbrick your phone

Try to do a hard reset. Hit both side buttons... and post results

Hard Reset shows me a Screen Canon Yang with Vodafone Logo and in the bottom right Corner: Now you're HardSPL. When i try and RUU with the original ROM i get no Connection.
On the RUU 5.4 the update starts and after 1% The Phone dies and the Update breaks off.
The Way i see it can either:
1. Remove Hard SPL or
2. Try this with the right Files http://forum.xda-developers.com/showpost.php?p=1848145&postcount=5

Problem solved, flashed with SD Card the Image from this Rom RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe according to this Thread http://forum.xda-developers.com/showpost.php?p=2148052&postcount=27
Now I have IPL 5.04.0001 and SPL 4.70 Yang

Just wanted to mention, I have not been playing with WM for long, actually only since I own a WM Phone the last couple of month and this was my first Herald Experience, but therefore I have been flashing and fixing all other Cellphones for many years. The Herald Section in this Forum and the Wiki are not to well organised, could the Mods here maybe think of making a few Sticky Threads explaining the Basics to noobs in a Nutshell. I will post a new Thread later when I have a bit of time with my little Experience.

HTC Touch not booting after trying CID unlock

i have rogers htc touch, after trying unlocking using ELF USPL , when i power on only see HTC Logo and then it goes off, i try loading new rom but still same problem . Please help

What is your IPL and SPL?

IPL is 2.21.0002
and
SPL 1.11.0000

I had the same problem...took me 3 hours to figure it out..
1. on Bootloader, re-install a ROM that works (go back to WM6 or WM6.1)
2. when it working, install USLP 1.11
3. DO NOT RESET AFTER...
4. install USLP 3.14
5. then you can install any WM6.5 ROM
For some reasons, the Rogers Touch has some difficulties to upgrade directly, even if it's unlocked...
Good luck
Michel

michel-2000 said:
I had the same problem...took me 3 hours to figure it out..
1. on Bootloader, re-install a ROM that works (go back to WM6 or WM6.1)
2. when it working, install USLP 1.11
3. DO NOT RESET AFTER...
4. install USLP 3.14
5. then you can install any WM6.5 ROM
For some reasons, the Rogers Touch has some difficulties to upgrade directly, even if it's unlocked...
Good luck
Michel
Click to expand...
Click to collapse
Thats a great tip to the community, I will refer back to your guide if I met with anyone with troubles using Rogers.

...thanks...
But, after reading a lot yesterday, seems that the USLP 3.14 is a ''battery eater''...
I'm testing it now..I will see in a couple of days if it is the case!
So far, it looks like it's using approx 2% of the battery per hour...

Definitely, you should always use 3.10.
I had a bad experience with 3.14, it takes up half of my battery after 5 hours of almost no usage.

i'm confused. .... i also have a rogers htc touch as well and i want to flash a custom rom onto it.
(my IPL: 2.21.0002 and SPL: 2.21.0000)
First, i know it has to be CID unlocked... using >> Elf 1.11 USPL ?
Can i use HARDspl ?? What is the difference between USPL and Hard uspl ??
Because i read something about ..... " HardSPL : This modified bootloader allows a much safer flashing process to take place since it reduces the chance of permenently bricking your device. It also removes the need to CID Unlock the device since it ALWAYS reports SuperCID when flashing. "
After a CID unlock and soft reset, the phone will reboot into the old ROM (Rogers, in my case) if i have not began flashing a new rom ??
Some advice please... thanks!

Use the guide written on 4th post.
Its located on this thread
Cheers.

[SOLVED] Stuck with MFG SPL 2.02/2.03 from Test Rom [SOLVED]

Hello,
I accidentally flashed a Test ROM w/ an MFG SPL (Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test) and meant to flash 2.13 shipped rom and now I am stuck with 2.02/2.03.0000 Engineering SPL and can't seem to flash any official/shipped roms to get back to 2.08/2.10 spl..
In other words how can I flash an SPL that is compatible with HSPL3 Utility..
(SPL 1.42.0000, SPL 1.62.0000, SPL 1.66.0000, SPL 2.07.0000, SPL 2.08.0000, SPL 2.10.000)
Please help!
Thanks.

Solution Found!
Lexx_xda said:
We have modified the installer HSPL3 Cotulla and added the ability to install HSPL 2.08 SPL 2.02. This version is not suitable for installation on SPL 2.07, on the other can.
On this ImaSoft me right, I give you a file and password for the archive.
Password: 96EF2E24-B657-4ebe-BB66-D2697FDEC815
Those wishing to thank ImaSoft:
WebMoney: Z392411566318; R371997483121; U774668296579
Click to expand...
Click to collapse
If this helped you out of SPL 2.02 please remember to thank these guys for working this out.
Info about MFG SPL:
Why can't I change the SPL with these test ROMs?
- These stock ROMs have an MFG SPL which cannot be overwritten in any way, not by flashing stock ROMs from SD, HSPL utility, SSPL or goldcard. The only successful way has been to drop the SPL with mtty (and has only been done once or twice).
- Good new is you can still use your HD2 and switch between 2.02 and 2.03 test ROMs..
What is an MFG SPL?
- MFG SPL = Engineering SPL
xmoo said:
Guys, MFG SPL allowes you to use some extra commands using JTAG which you wouldn't be able to use on normal SPL.
I remmeber back in the days there was this user "Leoni" who was stuck on 0.67MFG SPL.
Comonex helped him dropping it. I tried to contact him several times for you guys.
But he never responded back to me.
So spam pm him
Click to expand...
Click to collapse

Scabes24 said:
In other words how can I flash an SPL that is compatible with HSPL3 Utility
(SPL 1.42.0000, SPL 1.62.0000, SPL 1.66.0000, SPL 2.07.0000, SPL 2.08.0000, SPL 2.10.000)
Click to expand...
Click to collapse
this happened to several people some months ago.
goldcard may work, yes, but if not then sspl should get you flashing roms, but you can't change radio with sspl.
look for thread started by xmoo around february or march.

I thought I had tried sspl.. could I have done it wrong?
I found it here: http://forum.xda-developers.com/showthread.php?t=606713
I put the shipped 2.13 (also tried 2.05, 2.07, 2.09, 2.10, 2.11 stock and test roms) rom nbh from here: http://forum.xda-developers.com/showthread.php?t=655653 in a folder with the SSPL.exe and then run .exe but the progress bar stays at 0%
I also tried creating a goldcard, but not quite sure how it works. do I put an nbh on the card with it and boot from sd? or use CustomRUU?
The only ones I can flash back and forth are 2.02 and 2.03 test roms. I'm so annoyed!
Thanks

Nevermind the device wont even turn on anymore

2.02 is a MFG SPL.
Engeniering SPL. You have to drop it using mtty (but if you do it the wrong way, you may brick ur phone!)
Someone flashed 2.10.0 with sspl and sent it back for warrenty. When it came back it had 2.13 with SPL 2.10 on it....

xmoo said:
2.02 is a MFG SPL.
Engeniering SPL. You have to drop it using mtty (but if you do it the wrong way, you may brick ur phone!)
Someone flashed 2.10.0 with sspl and sent it back for warrenty. When it came back it had 2.13 with SPL 2.10 on it....
Click to expand...
Click to collapse
Well for some reason I tried flashing to the 1.01 test from the 1.03 to see if it would change from the MFG spl and I wasn't really paying attention to the progress bar but when I looked back it said (on PC) "ROM Update sucessful" but the phone didn't boot and won't even charge now?
What happened? and can I still send it in for warrenty?
Thanks for the help!

Scabes24 said:
Well for some reason I tried flashing to the 1.01 test from the 1.03 to see if it would change from the MFG spl and I wasn't really paying attention to the progress bar but when I looked back it said (on PC) "ROM Update sucessful" but the phone didn't boot and won't even charge now?
What happened? and can I still send it in for warrenty?
Thanks for the help!
Click to expand...
Click to collapse
Well if the phone isn't powering on, they probably can't check the spl...
So mayb yes. There are some other people who have done the same ish, and returned there phone. Ask them first.

xmoo said:
2.02 is a MFG SPL.
Engeniering SPL. You have to drop it using mtty (but if you do it the wrong way, you may brick ur phone!)
Click to expand...
Click to collapse
I am badly looknig for an MFG SPL.
Can someone point me where this is located pls? thanks!
Sry. please ignore my questions, I asked too fast...

Even MTTY does not remove the SPL 2.02.0000
Any solution for this yet? The test ROMs 201 to 209 are not intended for the TMOUS devices there for it is making it hard to remove the watermarked SPL.

I recontructed the ROM without the watermark but it will not install on the device. Anyone has an idea of how to remove the watermark? The SPL used form that ROM is the cause of the block...

Anymore thoughts on this issue?
I bought an eBay "for parts only" HD2 that the seller said sometimes booted into windows 6.5 but most of the time froze at the stick-together screen and never fully booted. Sounded maybe fixable to me, so I took a chance on it. I've never seen it try to boot into winmo 6.5 and when I check the bootloader info I see this:
PB81120 SS-B3
SPL-2.02.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
The SPL-2.02.0000 was how I found this page. I've read many other pages about HSPL3 etc., but this phone is not recognized at all by two different WinXP machines w/ActiveSync. I don't get any messages regarding Qualcomm or anything like that. It's as if it isn't plugged in except the charge light does go on.
The only thing I can do is flash from the MicroSD card. But, haven't found any other ROMS other than the one that is on it already, that will actually flash. The others get stuck at a white screen that says Loading... and it just hangs there.
When the phone powers up it shows:
R 2.06.50.23......3 (the ...... is actually a squiggly looking line, not actually dots)
G 15.30.50.07u
D 2.03.75592 8G
then it just hangs there forever and goes into what looks like a screensaver mode (parts of the screen get darker and the stick together moves around as well).
If it's dead/bricked, what part inside would need replacing to get it running again (i.e. the motherboard)? This phone looks brand new. It's it fantastic condition. I've seen terrible looking HD2s on eBay that still work. So, I'm curious if there is something I could take out of an ugly phone and swap into this pristine HD2 and have it work.
As I see it, my only other options are to contact HTC and find out what they charge to repair it, or sell it for parts - again.

Since last post have discovered if I manually put phone into bootloader mode then plug it in via USB to my PC I hear the confirmation from the PC that the device is plugged in. Activesync does not fire up, but bootloader changes from serial mode to USB mode. I can start the ROM update utility, the black htc screen with 0% shows on the phone but eventually times out with an error [262] that the recovery process doesn't fix.

runningtiger said:
Since last post have discovered if I manually put phone into bootloader mode then plug it in via USB to my PC I hear the confirmation from the PC that the device is plugged in. Activesync does not fire up, but bootloader changes from serial mode to USB mode. I can start the ROM update utility, the black htc screen with 0% shows on the phone but eventually times out with an error [262] that the recovery process doesn't fix.
Click to expand...
Click to collapse
The person who owned that previously probably did the same thing I did and flashed one of the test roms with MFG SPL (2.02 or 2.03) Just don't try to flash 2.01, it'll most likely brick it. tomorrow the unbricking attempt on my device will begin.. but I guess you have to drop the SPL using mtty. talk to xmoo

I'll be very interested to read how your unbrick attempt turns out. I tried the MTTY instructions here: http://forum.xda-developers.com/showthread.php?t=668347
But, that post starts out saying "Before you start one note, this method only works if you succesfully flashed HSPL", which of course my HD2 does not have. Mine used to have 2.02.0000, but after many different tries at a fix - now has 2.00.1000. This is no better a situation to be in as it never gets past the "stick together" screen either.
I tried the create a goldcard.img info found here:
http://forum.xda-developers.com/showthread.php?t=591314
However, the directions for QMAT are outdated. But, I did download the new PSAS software offered at the site linked to in the above post and believe I got my 1GB MicroSD card's serial number but when I tried to "generate HTC goldcard" for Leo it gives a message that says "Goldcard for newer devices isn't implemented in this unregistered version" and it looks like it cost 30Euros to register. I'd pay if I knew for a fact this was going to work. But, I have my doubts because in step 2 you need to change the security permissions policies on the HD2. I have no access to the registry since there is no activesync connection possible at this point and I can't launch any programs like PHM.
The fix (if there is one even possible) has to come completely from the SD card as far as I can tell.
Good luck with yours! I hope something works and you come back here and post the sequence.

runningtiger said:
I'll be very interested to read how your unbrick attempt turns out. I tried the MTTY instructions here: http://forum.xda-developers.com/showthread.php?t=668347
But, that post starts out saying "Before you start one note, this method only works if you succesfully flashed HSPL", which of course my HD2 does not have. Mine used to have 2.02.0000, but after many different tries at a fix - now has 2.00.1000. This is no better a situation to be in as it never gets past the "stick together" screen either.
I tried the create a goldcard.img info found here:
http://forum.xda-developers.com/showthread.php?t=591314
However, the directions for QMAT are outdated. But, I did download the new PSAS software offered at the site linked to in the above post and believe I got my 1GB MicroSD card's serial number but when I tried to "generate HTC goldcard" for Leo it gives a message that says "Goldcard for newer devices isn't implemented in this unregistered version" and it looks like it cost 30Euros to register. I'd pay if I knew for a fact this was going to work. But, I have my doubts because in step 2 you need to change the security permissions policies on the HD2. I have no access to the registry since there is no activesync connection possible at this point and I can't launch any programs like PHM.
The fix (if there is one even possible) has to come completely from the SD card as far as I can tell.
Good luck with yours! I hope something works and you come back here and post the sequence.
Click to expand...
Click to collapse
2.03 has the mfg spl 2.02.0000 and i think 2.01 or 2.02 test ROMs have 2.00.1000. Least thats what I remember..

runningtiger said:
But, I have my doubts because in step 2 you need to change the security permissions policies on the HD2.
Click to expand...
Click to collapse
that part is only necessary to find the ID No. of the sd card. If you can get access to a working WM phone for a few minutes, you can use the other device to find the ID No.
There are alternate ways to get the ID, such as a linux boot disk on a laptop that has a built in SD card slot, but the slot must be directly mounted on the computers PCI bus, if it runs through a usb header it will give you the ID of teh USB header and not the card.

I'm trying to find a way for HSPL3.exe to disable the SPL version check.
This way you can directly flash other HSPL versions....

Thanks for looking into this..

xmoo said:
I'm trying to find a way for HSPL3.exe to disable the SPL version check.
This way you can directly flash other HSPL versions....
Click to expand...
Click to collapse
Is there anything I can do to help?