Does anyone know how to unbrick the CDMA Hero? - Hero CDMA General

My phone shut off and has not been able to turn since. I tried flashing a ROM and didnt relive after that. Please help.

What do you mean it doesn't turn on? What happens when you hold the power button?

it doesn't boot ...it is as if it were dead

Check to make sure it is charged and the battery is installed properly. I have had the battery so dead that it didnt even vibrate to indicate booting.

Yeah. Let it sit on the charger for a few minutes, make sure battery is in right and everything is plugged.
Check for amber LED, let it charge a few minutes, then try again and do it like that every couple minutes. If nothing still, buy a new battery or exchange it.

nothing so far ...ive scheduled an appointment to repair ...i know they wont be able to do anything for this phone. I wanted to see if I can avoid not having to give up my HTC hero and deal with a replacement phone for a while.

ummmm, how did this happen?
you may not want to say for fear of bashing but I promise I won't, as far as I've seen it takes a very unique set of circumstances to actually brick these things
EDIT: my prediction: you tried to flash a GSM rom onto it

so when attempting to get the download file for the Eclair 2.1v1.5 rom it stated that the radio posted is recommended. Prior to flashing the radio i did a nandroid backup and then I flashed the radio. During the flash screen (open box to phone image) it blacked out after about 20 seconds.

kel_o91 said:
so when attempting to get the download file for the Eclair 2.1v1.5 rom it stated that the radio posted is recommended. Prior to flashing the radio i did a nandroid backup and then I flashed the radio. During the flash screen (open box to phone image) it blacked out after about 20 seconds.
Click to expand...
Click to collapse
sorry bout what happened. I know jack-diddley-squat about radios...so I might have been in your place if I tried it.

kel_o91 said:
so when attempting to get the download file for the Eclair 2.1v1.5 rom it stated that the radio posted is recommended. Prior to flashing the radio i did a nandroid backup and then I flashed the radio. During the flash screen (open box to phone image) it blacked out after about 20 seconds.
Click to expand...
Click to collapse
So my theory is that this nOOb flashed the GSM radio. Here is what he did.
He seen the post on the Eclair 2.1v1.5 rom on our forums and got click happy. Clicking on the link under that thread for the GSM ROM.
The current build is based on Lox and Behnaam's GSM 2.1 v1.5.
Click to expand...
Click to collapse
Which took him here:
http://htcpedia.com/forum/showthread.php?t=1448
Then he flashed the radio in this post.
(Suggested radio 63.18.55.06JU_6.35.09.26)
Click to expand...
Click to collapse
So yea he didn't read, just clicked, have fun with that.
And i suppose you didn't flash a recovery img after rooting? Well next time you will learn to read.

Have you tried booting into recovery and doing a nandroid restore?

i've never heard of a bricked CDMA hero... but i guess flashing a GSM radio would do the trick
ok i searched and this may be the FIRST EVER bricked CDMA htc hero!
correct me if i'm wrong but i couldn't find anything on google about this.
maybe we should sticky this, or delete that link to the gsm rom so this doesn't happen again?

yeah i guess i did flash a gsm rom which definitely pwnd my phone ...i did everything possible. hard reset buttons. basically couldnt do anything with adb as the phone was completely shut off so no way to connect. Well all in all i learned my lesson. The techs at the sprint store couldnt do anything to fix the original phone so they said what the heck and provided me with a brand new google branded hero.

We all have done it!
kel_o91 said:
yeah i guess i did flash a gsm rom which definitely pwnd my phone ...i did everything possible. hard reset buttons. basically couldnt do anything with adb as the phone was completely shut off so no way to connect. Well all in all i learned my lesson. The techs at the sprint store couldnt do anything to fix the original phone so they said what the heck and provided me with a brand new google branded hero.
Click to expand...
Click to collapse
Flash lesson 101, read-read-read!!!
Don't worry we 'ALL' have done it. And LEARNED from it.
Keep on going!!!

I'm glad to hear you got your phone replaced. I don't understand how you couldn't boot into any mode that would allow you to fix this. But I don't mess with radios whatsoever.

thedudejdog said:
maybe we should sticky this, or delete that link to the gsm rom so this doesn't happen again?
Click to expand...
Click to collapse
+1 Please sticky and/or remove link. We don't need people jumping the gun and flashing ROMs that will brick their phones.
Cheers.

WhiteWidows said:
So my theory is that this nOOb flashed the GSM radio. Here is what he did.
He seen the post on the Eclair 2.1v1.5 rom on our forums and got click happy. Clicking on the link under that thread for the GSM ROM.
Which took him here:
http://htcpedia.com/forum/showthread.php?t=1448
Then he flashed the radio in this post.
So yea he didn't read, just clicked, have fun with that.
And i suppose you didn't flash a recovery img after rooting? Well next time you will learn to read.
Click to expand...
Click to collapse
Wow, way to show class. Nothing like a little compassion around the holiday season, I see. You are a true class act, and I bet your friends and family are very proud of the way carry yourself. Unfortunately, not everyone can be as perfect as you are, so try to take it easy on the rest of us.

Let it go guys... on all sides of the argument.
he made a simple enough mistake. It's been remedied. Lets all move on.

obelisk79 said:
Let it go guys... on all sides of the argument.
he made a simple enough mistake. It's been remedied. Lets all move on.
Click to expand...
Click to collapse
+1 for this

How does a radio flash stop a phone from turning on?
Isn't the whole point of a recovery mode, to be able to "recover" if something goes wrong.
Shame on you whitewidows, for bashing him... The whole reason people get things working is because of trail and error.
If anything he helped us all by confirming that a wrong radio flash will completely ruin your recovery console, possibly bootloader, and (maybe even some actual hardware).
Hopefully this doesn't discourage users from trying to hack our radio.

Related

Can anybody help here! HTC Touch/Vogue/xv6900 Custom ROM Flash

Alright, I've been in the process of trying to flash the ROM on my Vogue. I've been doing this over at PPCGeeks, and thought I try my luck for help with good people of xda.
Here is the comment I posted over there:
Alright, I've been reading and reading, can't find the answer, so hopefully someone can give me a detailed answer.
I ran the unlocker, to flash on OMJ Vogue ROM, with the Rev-A and GPS capabilities. During the process when the HTC ROM updater came on, the device wouldn't reconnect (I tried about 5 times, hard reset and starting from scratch). After waiting at the updater for about 10 minutes, I hit next and this time, as mentioned above, it said it was replacing the ROM image, but was blank. Meanwhile my phone is on the bootloader reading SPL-2.00.CoKe, after the updater went through the process, all of a few seconds, it performed the hard reset.
Now I have entered the bootloader to see SPL-2.31.CoKe, even after two hard resets, one being the auto, and one manual. The phone starts as it should, but once I turn it off, it won't power back on. I believe I saw a fix for this, but can't remember.
My biggest questions are, what can I do now? Is this normal, and I should continue to flash from here?
Anybody here know what I can do?
Thanks!
Here is a good place to start:
http://forum.xda-developers.com/showthread.php?t=398571
or even the entire Vogue subforum.
Wow, thanks junior, this is a bit more of a specific question.
Sounds like you did not do the radio upgrade that is necessary. I agree though, posting in a forum that is specific to your device/problem is best. And, I know for a fact, that there are numerous threads/posts on this subject at ppcgeeks.
try the ffg
http://forum.xda-developers.com/showthread.php?t=394039
or
http://forum.xda-developers.com/showthread.php?t=387960
colonel00 said:
Sounds like you did not do the radio upgrade that is necessary. I agree though, posting in a forum that is specific to your device/problem is best. And, I know for a fact, that there are numerous threads/posts on this subject at ppcgeeks.
Click to expand...
Click to collapse
That's the problem though, I couldn't even get to the radio part yet. I think the issue was with the reconnecting the device to ActiveSync, during the unlocking proccess?
Now, is there a way to complete this step through an SD card. Using ImCokeMan's 2.31 Vogue unlocker.
I went through the exact same thing, they're right about the radio
Use the official leaked sprint rom, it's an exe. Run it and flash. Then, DON'T LET IT BOOT UP!!! Immieaditely put it back in CoKe, and flash your desired ROM. When the vogue first starts up, it should say under those numbers that pop up R 3.37.15
xd1936 said:
I went through the exact same thing, they're right about the radio
Use the official leaked sprint rom, it's an exe. Run it and flash. Then, DON'T LET IT BOOT UP!!! Immieaditely put it back in CoKe, and flash your desired ROM. When the vogue first starts up, it should say under those numbers that pop up R 3.37.15
Click to expand...
Click to collapse
Awesome, I'm glad someone here has knowledge on this ! Ok, but from this point, the device has been hard reset, still with it showing the SPL as 2.31.CoKe, so from here should I run the Radio exe, it seems that I never finished the first step, which is completeing the unlocker tool, is this normal?

First day bricked my magic

I got my magic and bricked it today.Any thoughts to unbrick i am crying please somebody help. i cant face my parents or any person at my place.
advise on what u did before it got rooted..
step by step
I followed the mytouch guide and saw my device was 32b and went ahead for 32b (dont know if it was necesarry) and applied radio as update and i am fked up. fk me
charnsingh_online said:
I followed the mytouch guide and saw my device was 32b and went ahead for 32b (dont know if it was necesarry) and applied radio as update and i am fked up. fk me
Click to expand...
Click to collapse
The same thing happened to me. I completely bricked it. Couldn't get into fastboot. Phone wouldn't even turn on, computer wouldn't recognize it, LED's would not come on when plugged into charger or phone. It was that bad. I just went to the T-Mobile store and said that it got like that over night when I left it charging. They sent me a new one under buyer's remorse. It worked out great for me. As for how it did it, I did it the same exact way you did. When applying the 32B radio I didn't flash the radio right. Idk if you read Amon_Ra's guide on how to root it. He didn't specify at first how to flash the radio so when guessing I broke it. Then a few hours later he then posted how to flash it. Just my luck! But I now have a new mytouch and when I followed his directions exactly for the 32B, it went off like a charm. 32B is necessary if you are going to run Hero roms because it is expecting the extra RAM to push it harder. Not so sure about Non-Hero Roms but I believe it might be the same thing. If your phone is as bad as mine, just use the same excuse. They will think it is a defective handset and send you a brand new one, not a refurb. I tried everything to get back into fastboot but I couldn't get the damn thing to start up. It was a sad day. We now have 3 rooted myTouch's that are working great. Hope this helps.
try removing battery for 1 hr and power it up again
You should PM that bloke who's got "have a problem with Android? PM me" in his sigfile. I'm sure he'll fix you right up.
(sorry mate, I couldn't resist! )
Loccy said:
You should PM that bloke who's got "have a problem with Android? PM me" in his sigfile. I'm sure he'll fix you right up.
(sorry mate, I couldn't resist! )
Click to expand...
Click to collapse
haha how ironic
if you have insurance on the phone...smash it and send it back. make sure the mobo is broken though and not just the screen. if not, well...sorry to hear about your new paper weight.
trying my hardest not to flame here, but.....
specify the guide you followed... a link to it would be a good start
state exactly what steps you did
state what conditions have occured (eg. stuck on logo, wont even power, etc)
state the actions you have taken to try to repair (sometimes you can make things worse but at least we'd know what you've done)
it's rather inconsiderate to not take the time to post these essential points.
you are expecting us to spend more time thinking and explaining your problem then you have bothered. not cool.
i concur..i try my best not to flame people, but in some situations, such as this one, a flame is appropriate....
i have bricked my HTC Magic while i was trying to flash this ROM (http://forum.xda-developers.com/showthread.php?t=549591)
but i guess i missed/skipped and had the wrong radio, so then after that all i get is a HTC Magic boot up screen and nothing else.
non of the button combinations work, i cant get to fastboot or recovery using the buttons.
is there anything i can do? any suggestions?!
P.S I DO have a Nandroid Backup (if that can help)
zidane said:
i have bricked my HTC Magic while i was trying to flash this ROM (http://forum.xda-developers.com/showthread.php?t=549591)
but i guess i missed/skipped and had the wrong radio, so then after that all i get is a HTC Magic boot up screen and nothing else.
non of the button combinations work, i cant get to fastboot or recovery using the buttons.
is there anything i can do? any suggestions?!
P.S I DO have a Nandroid Backup (if that can help)
Click to expand...
Click to collapse
Nandroid backups are useless unless you can get into recovery, or perhaps fastboot through a PC. But if you're bricked like these guys...then that's not possible.
korndub said:
i concur..i try my best not to flame people, but in some situations, such as this one, a flame is appropriate....
Click to expand...
Click to collapse
I don't think a flame is necessarily appropriate... Obviously the guy is distraught and doesn't know what else to do and is looking for support - not the time to get on him for not following the right protocol.
I understand your frustration, but try to understand his as well... if you don't want to help, then just let it go - somone else most likely will.
I bricked in the first hour, just think how i feel looking at the phone. $600 for a phonedummy
you gonna tell us what you did to brick it? what radio you applied? What methods you used?
ok now that you say my nandroid is useless
is there anything else i can do to get my phone working again?
if you replaced battery you cant relsoved becoz phone bricked is bricked
farbird said:
try removing battery for 1 hr and power it up again
Click to expand...
Click to collapse
if you replaced battery you cant relsoved becoz phone bricked is bricked

Disable hspa/hsupa and see if it bricks your phone!

Go on give it a go
My phone had the following brick earlier: http://forum.xda-developers.com/showthread.php?t=634347
Was wondering if anyone else has ever disabled it. I only did it because at my desk at work the phone is constantly fighting between 3g, Gprs and H
jonbaker76 said:
Go on give it a go
My phone had the following brick earlier: http://forum.xda-developers.com/showthread.php?t=634347
Was wondering if anyone else has ever disabled it. I only did it because at my desk at work the phone is constantly fighting between 3g, Gprs and H
Click to expand...
Click to collapse
Dont dare me to do anything
Disabled HSDPA/HSUPA, soft reset and everything perfectly fine. Left it 10 minutes and soft reset and everything fine, then finally reenabled it and soft reset and everything fine. Im not sure what happened to your phoen to cause that error but im glad it fixed itself eventually with a hard reset.
This is a good reason to put HardSPL on your devcie even if its just to save your phone from being bricked in the future so you can always get back into bootloader and flash a stock rom and stock spl back onto your phone if needed.
If you want to stick with your stock spl then be very very careful of any changes you make to your phone in the future.
I've done it on a couple occasions (for the same reason as you did) with no adverse effects. Using stock 1.66 ROM.
lol, ok, thanks for the test!
I'm yet to learn what you have just said about hard spl, will look into it! nooby alert
meegulthwarp said:
I've done it on a couple occasions (for the same reason as you did) with no adverse effects. Using stock 1.66 ROM.
Click to expand...
Click to collapse
i was on 1.4, probably just a coincidence, i fail to see why that would have done that to my phone but something went wrong. Perhaps the 1.6 will be more stable for me
jonbaker76 said:
lol, ok, thanks for the test!
I'm yet to learn what you have just said about hard spl, will look into it! nooby alert
Click to expand...
Click to collapse
Just follow the link in my sig on "Flashing your first LEO Rom (for noobs)" and it will give you all the information you need to flash HardSPL. Its extremely safe to do and will protect your phone from possible bricks in the future.
mskip said:
Just follow the link in my sig on "Flashing your first LEO Rom (for noobs)" and it will give you all the information you need to flash HardSPL. Its extremely safe to do and will protect your phone from possible bricks in the future.
Click to expand...
Click to collapse
before i plough on with the read, does it invalidate the warranty? thanks
jonbaker76 said:
before i plough on with the read, does it invalidate the warranty? thanks
Click to expand...
Click to collapse
it does only for the time you have the customizations made.
You can flash the stock rom via microsd to put the device to pristine condition for warranty servicing.
Read very well mskip's thread in the ROM development forum stickies
Which incidentally is this one

Update to the new radio. Anyway to degrade?

Went to the new radio sent out by Flipz. Flipz you are great and all but the radio is not working out for me. I want to degrade back to the original. Suggestions.
You JUST made a topic about this.
TheBiles said:
You JUST made a topic about this.
Click to expand...
Click to collapse
I know I did. I tried to erase and make a my point a little bit more understandable. My bad.
yea give it a day or so to familiarize itself with your system and towers etc. i dont see how all these people are getting terrible results from it....and its not that hard to go back just ruu
You see I have tried to use the RUU wizard set up thru fresh. When I tried it I got an error.
there was a post a few days ago with the old radios in an update.zip format that you could flash from recovery, have you tried using that to downgrade yet?
Please read the following threads before trying anything. That way you are fully prepared.
http://forum.xda-developers.com/showthread.php?t=645002
http://forum.xda-developers.com/showthread.php?t=645435
http://forum.xda-developers.com/showthread.php?t=643796
http://forum.xda-developers.com/showthread.php?t=600720
http://forum.xda-developers.com/showthread.php?t=644417
http://forum.xda-developers.com/showthread.php?t=644004
People told me to flash the original radio in the same manner as the updated radio in nandroid. It did not work. Then they told me to RUU, that bricked or now semi-bricked my phone. I just think you should be prepared before you do anything. Running the RUU apparently does not work as well as some people think it does.
marcusva79 said:
Went to the new radio sent out by Flipz. Flipz you are great and all but the radio is not working out for me. I want to degrade back to the original. Suggestions.
Click to expand...
Click to collapse
What are your specific problems/issues with it?
crash447 said:
Please read the following threads before trying anything. That way you are fully prepared.
http://forum.xda-developers.com/showthread.php?t=645002
http://forum.xda-developers.com/showthread.php?t=645435
http://forum.xda-developers.com/showthread.php?t=643796
http://forum.xda-developers.com/showthread.php?t=600720
http://forum.xda-developers.com/showthread.php?t=644417
http://forum.xda-developers.com/showthread.php?t=644004
People told me to flash the original radio in the same manner as the updated radio in nandroid. It did not work. Then they told me to RUU, that bricked or now semi-bricked my phone. I just think you should be prepared before you do anything. Running the RUU apparently does not work as well as some people think it does.
Click to expand...
Click to collapse
So I am gonna take it from you man. I am pretty sure someone out there over the rainbow will make one to degrade the radio. i will settle with the radio for now, since I have no choice, well I already tried to use the RUU wizard, good thing I made a nandroid backup.
raadio flash is different than a regular flash nandroid wont get ya back to an older one
crash447 said:
People told me to flash the original radio in the same manner as the updated radio in nandroid. It did not work. Then they told me to RUU, that bricked or now semi-bricked my phone. I just think you should be prepared before you do anything. Running the RUU apparently does not work as well as some people think it does.
Click to expand...
Click to collapse
The problem is you are trying to use nandroid to flash an update.zip.
The radio will come as an update.zip format. Flash it like you would a new rom through recovery.
Nandroid does nothing for radio flashing. You can literally fry the phone's motherboard by flashing the wrong radio, I would know seeing as I did it to my first phone. lol
nbroneobi said:
raadio flash is different than a regular flash nandroid wont get ya back to an older one
Click to expand...
Click to collapse
I know that. Must be tired or something cause I am typing all weird. I did a nandroid recovery before I did the RUU wizard. And I glad I did. Cause I almost bricked my telefono.
willowmp said:
The problem is you are trying to use nandroid to flash an update.zip.
The radio will come as an update.zip format. Flash it like you would a new rom through recovery.
Nandroid does nothing for radio flashing. You can literally fry the phone's motherboard by flashing the wrong radio, I would know seeing as I did it to my first phone. lol
Click to expand...
Click to collapse
Maybe I shouldnt really do anything with the radio and just live it out with 2.1. I kinda of scared to fry or brick anything.
marcusva79 said:
I know that. Must be tired or something cause I am typing all weird. I did a nandroid recovery before I did the RUU wizard. And I glad I did. Cause I almost bricked my telefono.
Click to expand...
Click to collapse
how did making a nandroid recovery save you from bricking your phone??
okay so on the thread with the radios that Avalaunchmods posted, there was an error in the way he had his stock radio.img flash onto the phone. i'm attaching a signed stock radio that should flash correctly.
it SHOULD work. i don't see why it wouldn't work, because it is a CDMA radio and what it would do is just rewrite the old radio over the new radio. so i don't see a problem with this bricking any phones. but i don't take any liability if something goes wrong.
Just verify that you have the correct radio, and make sure it is coming from the CDMA Hero section and not the GSM section.
The real danger comes from flashing a GSM radio onto a CDMA hero. If you do this you will watch your phone kill itself.
I believe the radio was posted, though you could get it out of the RUU I think? Then you'd just need to request someone sign the zip and use it as an update.zip from recovery.
i took that radio.img from Avalaunchmod's thread. the radio that he got that out of was from the RUU, so yes, this is definitely a CDMA radio and its from the RUU.
justinisyoung said:
how did making a nandroid recovery save you from bricking your phone??
okay so on the thread with the radios that Avalaunchmods posted, there was an error in the way he had his stock radio.img flash onto the phone. i'm attaching a signed stock radio that should flash correctly.
it SHOULD work. i don't see why it wouldn't work, because it is a CDMA radio and what it would do is just rewrite the old radio over the new radio. so i don't see a problem with this bricking any phones. but i don't take any liability if something goes wrong.
Click to expand...
Click to collapse
Anyone want to try this. ARRRRRhj
just do exactly what you did to get the newer one on
justinisyoung said:
how did making a nandroid recovery save you from bricking your phone??
okay so on the thread with the radios that Avalaunchmods posted, there was an error in the way he had his stock radio.img flash onto the phone. i'm attaching a signed stock radio that should flash correctly.
it SHOULD work. i don't see why it wouldn't work, because it is a CDMA radio and what it would do is just rewrite the old radio over the new radio. so i don't see a problem with this bricking any phones. but i don't take any liability if something goes wrong.
Click to expand...
Click to collapse
Anyway to try this without nandroid. Since I am stuck in the "semi-bricked" limbo "fastboot oem boot" state.
justinisyoung said:
i took that radio.img from Avalaunchmod's thread. the radio that he got that out of was from the RUU, so yes, this is definitely a CDMA radio and its from the RUU.
Click to expand...
Click to collapse
Lol you posted before I finished my post.

[Q] bricked my hd2 but my computer recognizes it...?

so i flashed my phone with the wrong radio i believe but the strange thing is that my computer recognizes it. the doesnt turn on at all but i here the sound of a device being plugged in when i plug it into winodws. is there a chance its not bricked?
the sound doesn't necessarily indicate much.
what did you do? specifics, please?
can you get into bootloader?
i was trying to flash a stock rom and i guess it didnt work?
minnieman said:
i was trying to flash a stock rom and i guess it didnt work?
Click to expand...
Click to collapse
mate. as i said, specifics please. like what rom / type of phone do you have? what rom were you flashing? you said radio, now you say rom.
also, as i asked, can you get into bootloader?
please, if you want help, we need information.
minnieman said:
so i flashed my phone with the wrong radio i believe but the strange thing is that my computer recognizes it. the doesnt turn on at all but i here the sound of a device being plugged in when i plug it into winodws. is there a chance its not bricked?
Click to expand...
Click to collapse
You may try and follow this solution, I suggested earlier. Click here
Let us know if it worked.
sorry i was vague, i was in a rush to get to work this morning and on top of it i was panicking. i flashed the stock image:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i tried that on a hd2 so i could flash hspl3 again and use wp7 on my hd2.
i ended up just sending it in, but if they send it back with no repairs ill try your method... i relly hope they just send me a new one though. i mean... i flashed a stock image to the hd2, so shouldnt they see no hspl and just the stock spl?
again, more details are needed.
like what type of hd2 do you have? if it is a us tmo brand, i believe it is bricked (as you flashed a .51 radio.)
if you flashed your stock rom from your sd card, hspl is removed. if you flashed over usb, and did not uninstall hspl, hspl is still there.
what i don't get is if you can flash a rom, why are you saying it is bricked? no offense, but each post seems to change the story (first it was a rom, the a radio, now you are flashing roms but sending the phone in, still don't know if you can get into booloader, but now you sent the phone in or is it in your possession???) and i am not following what you did, where you started or what is going on. maybe i am totally missing what you are saying (which is possible)...hope someone can help you.
i have the 1024 us tmous hd2. i tried to flash to a stock rom, forget i said radio. i tried to flash the .51 which i did not know would brick my phone, so i played dumb with htc and sent it in to get repaired. if they dont repair it i am kinda SOL because i flashed using usb and they will see it has HSPL. sorry, do i need to include anything else? i am just kinda a noob... sorry.
i swear i posted a response. hmm.
thank you for the details. your assessment of the situation is spot on; unfortunately your phone is indeed bricked. and likely htc will not know about hspl...or so i have heard from others.
curious, why did you send it to htc? did tmobile reject it? if not, and htc doesn't give you a new one, try getting it to tmobile (under warranty)- worked for me when the phone stopped working for unknown reason. good luck.
possible to make it back to work...?
jsmccabe78 said:
i swear i posted a response. hmm.
thank you for the details. your assessment of the situation is spot on; unfortunately your phone is indeed bricked. and likely htc will not know about hspl...or so i have heard from others.
curious, why did you send it to htc? did tmobile reject it? if not, and htc doesn't give you a new one, try getting it to tmobile (under warranty)- worked for me when the phone stopped working for unknown reason. good luck.
Click to expand...
Click to collapse
here i am one of the ppl out there have the HD2 bricked.
I have tmo version, Couple months ago i was trying to flash a office rom, which is i don't remember which one, but i really sure it was a HTC Office Rom., I let the phone do it thing while flashing, but after the flashing the screen go off and didn't back on working anymore, I still have the bricked phone though, and i was wondering if any possible method apply to the above problem?
i will looking forward to hear from u, Thank U,
chhada said:
here i am one of the ppl out there have the HD2 bricked.
I have tmo version, Couple months ago i was trying to flash a office rom, which is i don't remember which one, but i really sure it was a HTC Office Rom., I let the phone do it thing while flashing, but after the flashing the screen go off and didn't back on working anymore, I still have the bricked phone though, and i was wondering if any possible method apply to the above problem?
i will looking forward to hear from u, Thank U,
Click to expand...
Click to collapse
Were you able to get into bootloader Chhada?
nicedude_abad said:
Were you able to get into bootloader Chhada?
Click to expand...
Click to collapse
no dude, nothing respond with the power button, *_* it doesn't do anything,
headache
man this could be very tiring ive tryed everything from hard soft chilled any kind reset.volume down red green white button hold down but one thing is weird is when i connect it to the pc wiht the thing off it makes a sound like it sees it but no luck with tmobile rom update. ill send to tmobile and play the good guy http://media.xda-developers.com/images/smilies/confused.gif

Categories

Resources