USB connection popup - Touch Diamond2, Pure General

Hi,
When I connect usb to my phone, I used always to get a popup asking what type of connection I want to use.
Just yesterday, after I have chosen internet sharing, I dont get that popup anymore, I keep getting internet sharing automatically and no popup!!
How do I get the popup back?
I went to Settings -> Connections -> USB to computer
and checked Ask about connection type. But it doesn't seem to ask anymore no matter what I do? How do I fix that please :-(

RESOLVED!
It is resolved! in a wired way.
I haven't been asking for connection type at all but after creating a connection in "Internet Sharing" and then disconnect again. Unplugged the usb and plugged it again. The popup just showed as it used to be!!
Seems like it was stuck somewhere with internet sharing!

Related

Possible to close ActiveSync??

Hi guys, here's a question for ya's:
Right now, i want to chage my phone via USB, and be conected to my phone's 3g (Three australia) network.
However, because it's connected via ActiveSync, it won't let me...
My idea, is to close ActiveSync, and away i go, but i can't, everytime i end the task, from task manager, it just re-opens straight away..
Do any of you guys know, how i can charge my phone via usb, and connect to a 3g/gprs network? Without resorting to pulling out the usb cable?
go into activesync settings and turn off USB Sync.. tis easy
File > Connection Settings > Allow USB Connections
Lol thanks..
Don't know why i didn't think of that.

Cingular Internet Sharing Problem - Please Help

I updated to the new HTC Cinuglar ROM. Before I updated I used the Wireless Model application with no issues.
Now, I followed the directions on AT&T's website.
Installed ActiveSync (disabled USB connections for Active Sync).
Went to Internet Sharing and selected USB and My ISP.
Connected the USB cable to the Laptop
Then clicked connect. It started to connect to the GPRS system and then after a few seconds returns the message "Remote Party Ended Connection".
I have found no information on any other settings to make Anyone have any idea what is wrong?
Also, it seems weird that in the Programs application "Internet Sharing" is not there, but it is in the Start Menu.
Thanks for your ideas and help.
easy fix for me
I have found that on my laptop, if wifi is turned on, Internet sharing is sporadic in performance. It seems as if ie wants to go to the wifi connection first before it will go to the internet sharing connection. I'm sure someone with networking expertise could tell me why and how to fix, but i just turn off my wifi adaptor.

Laptop does not see my tethered mogul

I was trying to tether to my laptop today and it seems that my laptop does not see the USB connection. I set my phone to internet sharing and connection of usb and phone as modem I then press connect it goes out and connects to evdo then it says check usb cable connnection. I then plug into my usb cable. Nothing happens except my charging light comes on. I know my phone works as I just tried it out on my co-workers laptop same procedure same cable and it connects without issue. I just downloaded the wmodem.zip installed it same issue. I Also tried to connect it first before I go to internet sharing. It connects to active sync then I start the connection and active sync goes away but I get the same message on my phone "check usb cable connection".
Bluetooth?
I had the same problem with mine and the usb connection. I think it needs drivers. if you look in device manager you might see a device with out drivers. If your buddys works find out what driver it's using..
I just use bluetooth. it works great if you have it.
Figured it out. In my network connections window when my phone would connect it would appear here under LAN or high speed internet connection. but it was in a disabled state so I enabled it and works like a charm.
Thanks for everyones help!

[solved] Q about settings for internet sharing

I'm trying to use the factory installed Internet Sharing (not the new HTC Wifi Router, not WMWifirouter, just the regular factory installed Internet Sharing) to get internet access on my PC via USB (not Bluetooth).
I've spent hours and hours reading and trying different things but it still does not work. Can someone please explain the settings they used to get this to work?
Settings for Active Sync?
Settings for Network Connections on PC?
Settings on phone?
I have tried all possible combinations of settings and am absolutely STUMPED. I'd appreciate ANY help.
FYI: My PC's running XP
EDIT:
So, I got the Internet Sharing to work and just wanted to share what I learned in case it helps someone else. I'm using the HD with stock WM 6.1 and a PC running XP with Active Sync 4.5.
My problem was that even after applying all the correct settings, Internet Sharing was never able to establish a connection (it kept saying "check USB connection"). I noticed in my PC under My Computer>Properties>Hardware>Device Manager that there was an exclamation point beside the phone network adapter, so I updated/uninstalled/reinstalled the driver with no success. This driver is normally automatically installed when you first install Active Sync and create a partnership with your phone, so then I decided to uninstall and reinstall Active Sync and then created a new partnership with my phone (I didn't have to worry about losing any of my synced contacts, notes, calender, texts, etc because I also sync with Microsoft MyPhone, which I highly recommend). Afterwards, I disconnected my phone from the PC and closed Active Sync. Then I used the following settings/steps and Internet Sharing worked flawlessly.
Here are the settings I used:
-in Active Sync: unchecked "allow usb connection", unchecked "allow connections to one of the following", "this computer is connected to" set to automatic, checked "open active sync when my device connects", checked "allow wireless connection on device when connected to the desktop"
-in PC: disable Windows Firewall and all other 3rd party firewalls
-in PC internet explorer: set LAN settings to "automatically detect settings" (in Firefox under Tools>Options>Advanced>Network>Settings set to "auto detect")
-in phone: under Start>Settings>Connections>USB to PC checked "Active Sync", unchecked "enable faster data synchronization", checked "ask me first about UBS connection type when I connect the device to the PC"
With these settings:
-connect your phone to PC (on phone, dialog box should appear showing Active Sync checked, USB unchecked, Internet Sharing unchecked)
-nothing should happen at this point
-then in phone, launch Internet Sharing, set PC Connection to "USB", set Network Connection to whatever data network your phone uses, then press "connect" (the status will change from "disconnected" to "check USB connection"); wait about 15-20 seconds while your PC reacts (it takes this long only the first time you connect because the PC is installing the appropriate drivers)
-the Internet Sharing status should change to "connected" and now you can use the internet on your PC through the data connection on your phone. So simple if everything works properly.
FYI:
-if you go back to PC under My Computer>Properties>Hardware>Device Manager you will see your phone network adapter (no longer with an exclamation point) called "Windows Mobile-based Internet Sharing Device"
-f you go to PC Network Connections you will see your new phone LAN connection
-if your phone falls asleep while connected, the internet connection does NOT get interrupted; I also received a text while it was connected with no problem
To Disconnect Internet Sharing:
-close all browsers, press disconnect on your phone, then unplug your phone from the PC
-you can now turn active sync back on by checking "allow usb connection" and turn your PC firewalls back on
Wow, sorry so long, hope it helps someone.
goldsfool said:
I'm trying to use the factory installed Internet Sharing (not the new HTC Wifi Router, not WMWifirouter, just the regular factory installed Internet Sharing) to get internet access on my PC via USB (not Bluetooth).
I've spent hours and hours reading and trying different things but it still does not work. Can someone please explain the settings they used to get this to work?
Settings for Active Sync?
Settings for Network Connections on PC?
Settings on phone?
I have tried all possible combinations of settings and am absolutely STUMPED. I'd appreciate ANY help.
FYI: My PC's running XP
Click to expand...
Click to collapse
If your trying to do this at work, there is most likely a firewall setup so this wouldn't be possible unless your knew access codes etc for firewall
If this is with your home pc, when connecting pc to HD using usb you should automatically be presented with a synchronization screen from activesync for setting up a connection. Ensure you select 'allow wireless data connections on your device while it is connected to your computer' before finishing
And also :-
On the Touch HD
Start - Settings - Connections - USB to PC
Check Activesync and uncheck "enable faster data synchronisation"
Spent a couple of hours trying to connect before I did this.
Hope this works for you.
r
Andrew
Thanks guys for your responses.
I've already tried each one of those things. I'm at home with firewall disabled, have the correct boxes checked in Active Sync, have the correct connection settings on the phone, etc. I've tried all possible combinations.
When I go to My Computer/Properties/Hardware/Device Manager I even see the phone Network Adapter but it has an exclamation point beside it. So I try to update/uninstall/reinstall the driver and it still doesn't work. Do I need to manually install different USD Modem drivers?? This doesn't seem right because these drivers should automatically be installed when I installed Active Sync.
I'm gonna try to update everything e.g. xp service pack and uninstall/reinstall Active Sync, etc. Hopefully after all of that it will work.

Internet Dropped When Connected with USB

Anytime I connect to my home (or work laptop) via USB, the internet no longer works. At work, I can understand this because of the proxy server, etc. Is there any way to always connect via my 3G connection and when connected via USB not to change the connection from 3G?
It's weird cos i have the same problem, but not all the time. When I flash my Miri rom's some seem to work over 3G when connect via USB, my latest one doesn't.
Now i dont sync my device to the PC anyway, so i use the power adapter and bluetooth, thus not having the issue. although I have never bothered to try and figure it out.
to force the data connection, try this
settings menu all settings connections connections - advanced tab,select network, and set the top drop down to the name of your data connection.
(if it already is, then.... ummm I dunno)
sorry but this did not work.
In activesync/WMDC, go to connection settings, and check "allow internet connections while connected" or something like this.
By default it cuts the other connections as the phone will get the net through activesync when it's connected.
kilrah said:
In activesync/WMDC, go to connection settings, and check "allow internet connections while connected" or something like this.
By default it cuts the other connections as the phone will get the net through activesync when it's connected.
Click to expand...
Click to collapse
this also did not work
On your phone:
Start > Tools > QuickGPS
Menu > Options
Turn off '"Download QuickGPS when connected to PC via ActiveSync".
Aterlatus said:
On your phone:
Start > Tools > QuickGPS
Menu > Options
Turn off '"Download QuickGPS when connected to PC via ActiveSync".
Click to expand...
Click to collapse
this worked for me at home, but did not work for me at work (perhaps having something to do with the work proxy?) any ideas...?

Categories

Resources