i recently recieved an htc titan running on verizon, i do not have any service only tmobile for my mytouch3g is there anyway i could update this phone to windows 6.5 and unlock it to use tmobile?
also i tried to update the binary thing updating to my computer had multiple errors and now the phone will neither connect to the computer along with when i turn the phone on it shows windows seven then displayes a no radio error and pretty much bootloops untill the battery dies.can anyone help me with these issues
No it is a CDMA phone and tmobile is gsm only. So it will not work on tmobile.
Related
Hi guys
I'm using an orange switzerland branded m5000, and I use buzz's unlocker yesterday to remove the SIM Lock on it. Appears top have worked fine, as I can use my wifes SIM card in it now(different provider).
However, I'm now trying to flash AKU 3.2 (Ivan's version) to my device. I let it connect to my PC with activesync, then start the RUU.exe. The screen that shows me the current versions, and what I'm upgrading to appears, and I click next. Then the small window with "gathering information from device" appears, and stays there. After about 30 seconds, my m5000 spontaneously reboots. Consequently, after another minute or two, I get a 101 connection error from the RUU.exe.
What am I doing wrong here?
Besides: My device currently (post-unlocking) claims to be running Radio V. 0.00.00, and the AKU3.2 upgarde screen claims it will only upgrade the CE Version, is this right? Am I now forever stuck of Radio V 0?
It worked now, please ignore
Ok, it worked. I dl'ed and flashed the 3.2 JasJar Rom first, and then Ivans beta14 worked. It's really quite a noticeable speed up. Thanks to everyone who spent their precious time developing these things.
Now all I have to do is get my providers MMS and GPRS and 3G settings back to normal.
Ok,
So I installed the T-mobile UK radio rom on my unlocked cingular HTC 8125 with a t-mobile sim. Upon reboot I get no phone service, it acts as though the phone is shut off but it's not. On bootup when it displays the IPL/SPL and OS and all that there was a line between the IPL / SPL lines and the OS line which used to have something on it, but now it's blank. Here's the worst part, it no longer recognizes on USB or under activesync, I tried to get it to work with bluetooth using a usb bluetooth adapter, but to no avail.
I need to know if there is anyway to get it working again, anyway at all to get it to connect or something so I can install a new radio rom on it.
Please help.
Help me too
I am in exactly the same predicament. I have spent days searching for a solution. Nthing so far. Anyone?
Rogue23
Well,only flashing a Radio Rom,never bricks a phone,cuz it doesn't include any IPL/SPL in it Its just a bad flash.Either,Try a Soft Reset or Hard Reset,if works fine,otherwise,get the phone in bootloaders (multicolor screen) and flash the cingular official Rom,it'll recover back. The phone doesn't get detected via usb or doesn't activesync if there's no working Rom (OS) on it,but if you are able to get to bootloaders and connect the phone via usb cable, a small usb appears at the bottom of the bootloaders screen,it means it has established connectivity and you can flash a rom.
Secondly if the ohine is not SIM unlocked,it won't work with a T-mobile SIM,you'll have to get it sim unlocked if you plan to use a different sim and network.
ericmda
Be a little more specific about the problem and remember to always post the version of the phone OR vital data of the phone to ask for an advise.
Cheers!
been done
yeah,
I've been able to get it into bootloaders, the usb pops up in the corner but when I try to flash a rom it it gives me a no phone connected type of error. which is really messed up because the first time I put it into bootloaders it worked, but I didn't use the official rom so the flashing didn't fix it.
If flashing the radio rom isn't supposed to brick it then well somehow mine is apparently the exception to the rule. Still gonna be working on it throughout today though, so any other suggestions?
Hello XDA, recently bought myself a leo. I turn the phone on it displays the loading screen etc, then the inital HTC Sense screen, it then immediatley goes to a page saying "Network is locked, please input unlock code"
Now i've tried to code on my sim, no dice, i've reset the phone to factory and tried it, no luck. I phoned virgin and they said its a faulty device and i should exchange it.. Now being my birthday and im inpaitent i don't wanna wait for them to change it.. is there a way i can flash the ROM or something? Doesn't in need HSPL installed?
Any help would be appricated.
My HD2 on Virgin came totally unlocked (can use any SIM) with standard HTC ROM.
Does sound like yours has a problem.
hmm, weird so theres no way to get around it?
Hello. I've been trying to tinker with this old phone and see what kind of custom ROMs i could load onto it and ran across this forum. In the blitz of information I came across a file called Titanunlocker that was supposed to allow me to install the custom ROMs I wanted.
I ran the unlocker and it quickly threw some info on the phone, then my phone popped up with 3 colored bars and now it says "TITA100 SPL-1.20.Olipro" and nothing more on it, other than Serial or USB at the bottom when I connect it.
Now I am unable to load any firmware be it custom or sprint official, and I am not able to get the phone to sync with active sync (or Windows Mobile Device Center since I'm using Windows 7).
Is there any hope for this old phone now, or am I doomed?
batpoople said:
Hello. I've been trying to tinker with this old phone and see what kind of custom ROMs i could load onto it and ran across this forum. In the blitz of information I came across a file called Titanunlocker that was supposed to allow me to install the custom ROMs I wanted.
I ran the unlocker and it quickly threw some info on the phone, then my phone popped up with 3 colored bars and now it says "TITA100 SPL-1.20.Olipro" and nothing more on it, other than Serial or USB at the bottom when I connect it.
Now I am unable to load any firmware be it custom or sprint official, and I am not able to get the phone to sync with active sync (or Windows Mobile Device Center since I'm using Windows 7).
Is there any hope for this old phone now, or am I doomed?
Click to expand...
Click to collapse
Your good. Your stuck in bootloader because your radio or OS does not match bootloader. Flash a 3.xx radio for the titan and then flash a 6.1 ROM.
To flash, plug phone in to computer and when you see the phone say serial, you should be able to flash.
Strike that, been awhiek since I've fused with the titan. your unlocker 1.20 is for non gps radio and wm 6.0. My sugestion is locate bootloader 2.40 and flash that. You probably already have gps radio and WM 6.1, so if you flash 2.40 you will be good.
Hello folks, I have purchased a US T-Mobile G1 from the market on this forum and it was unlocked and rooted with latest version of cyanogen mod. Yesterday night while playing with the phone ( I am totally noob with the G1 ) I accidentally wiped everything back to the stock fw, so I lost dangerSPL, HDBoot and also the recovery partition has been corrupted.
Now with the stock firmware I am stuck with the google account sync even though if I press the menu button the APN editing option comes up and it lets me add the APN of my Italian sim card, but no matter what I do it just don't work, it keep say there's a problem with my SIM card network, and to try again.
Also when I turn on the phone I can see a screen that says Aperture Laboratories, with a draw of a cake which says "don't worry u still got root"
What is that??? a sort of perm root??
I been googling for a whole day now about how to bypass this process and I don't seems to have found any working informations.
Can anyone help me please ??? I am desperate ...
The only guide apparently working regarding bypassing the google account sync I have found is this one http://forum.gsmhosting.com/vbb/f606/bypass-t-mobile-g1-google-activation-phonecarecenter-781472/ , the problem is I can't just get to install the correct driver on Windows XP SP2/SP3 neither on Windows 7 32bit, I have tried the impossible, but it just doesnt work, and with the default windows 7 driver it can't be seen through adb devices... Is there a way to do it on Linux or Mac ??? Any working usb driver for Linux or osx ???
Does anyone have any idea??? I think the only way to activate this G1 is with a T-Mobile US sim card which I don't have and I don't have chance to get as I am in Italy, any help please ??? If I don't get that god damn home screen I wont be able to do anything ....
Umm - me too,in the same place .
Can't make my Windows (and i tried to use XP an Vista) to recognize HTC G1 as phone, not 'usb mass storage device'
I have successfully activated my G1 through wifi. Regarding the driver installation, I have went through this guide and I have followed it to letter, and it worked, hopefully it will work out for u..