I have been going through phases of intense tiredness which after loads of tests at hospital and my doc, they have said it chronic fatigue syndrome.
I can get so physically tired I cannot keep my balance when walking or focus my eyes, however am still awake enough to use the phone although I slur.
The problem is my eyes are OK, but I get so tired I cannot see to read the letters on the screen and I cannot hold the device far enough away to get things in focus even at the largest text.
My doc says there is little point in seeing an optician as when I get more awake again I can see things fine, and the intensity of the problem will vary with how tired I am - so the only way I can see to address this is to have text larger than the current largest.
Is there any way of doing this. or getting the wizard to read me the text?
Or alternately any other suggestions?
A neighbor of mine was diagnosed with something similar, he's in his 40's. He has sleep apnea (sp?) and wears a mask to create pressure and give slight amounts of oxygen. He also had a sleep test done, and found out he has 900 leg twitches at night (I thought restless leg syndrome was BS at first). The leg twitches don't let him go into REM deep sleep so he's ALWAYS tired. Even to the point of being pulled over for "acting drunk" (I've never seen him even have a beer, ever).
He's improved now with some RLS medication and the mask, much more energetic. He's a carpenter, so quite active during the day, and looks pretty fit. Anyway, I'm not a doctor, but just odd that you mentioned your issues, and it sounded like his, because he cannot read his smartphone later in the day.
The MDA seems to have a tiny screen compared to some of the older PDA's. I really wish all PDA's had 640x480 screens instead of 320x240, it would make it so much more readable.
To change the system font size
1) On the Home screen, click Start > Settings System Tab > Screen.
3) Enable Cleartype using tab at the bottom (optional, might help)
2) Select Text Size tab, slide slider to larger or largest to set the size of the font that is displayed on the screen. It doesn't do it for EVERYTHING, but it might help with tasks, emails and calender
Click OK along the top right.
There are some registry tweakers out there that claim to be able to change the font size, or even the font itself to another font. Or you can research how to change registry settings yourself. Good luck!
Hi, after installing MarkVan's true VGA package in this link
http://www.jaml.com/MvRTrueVGA/, I have identified the following issues that I'm still unable to solved. I thought that a special thread to address specifically problems after this installation might be helpful.
I'll start by first listing what I've identified as problems:
1) setting>system>backlight screen could not be used. This problem is serious, as somehow by default, the backlight is switched off after just a few seconds in true VGA mode. Even if I try, using QVGA mode to change it such that backlight will not be switched off, as soon as I toggle back to the true VGA mode, it is switched off after 10 seconds again.
2)setting>system>clear storage screen is garbed. It is difficult to make up what the input instruction are in performing hard reset. Not critical but would be nice if the screen could be fixed.
3)setting>system>power screen is garbed due to wrong sized icon. This is minor problem.
4) Setting>system>TV out screen title has the wrong font. Minor problem
5) Setting>system>VueFLO screen title has wrong sized font. Minor problem
6)setting>connection>comm manager screen is garbed. Not being able to control the connection could be quite a problem. In this application, the Settins>Wireless LAN screen is also garbed. I can solve this problem by installing Commmgrpro to give exactly the same functionality, however. Therefore, I would say this is not really an issue. But would be nice if someone already know how to solve this.
7)setting>connection>wireless Lan heading and the screen is garbed. The screen could not be used. The font sizes within all tabs are of wrong sizes. Again, CommmgrPro solves this problem by replacing this.
8)setting>personal>phone (pin2 and "more" tab) are garbed
9) Phone. Although I've applied VJbigpohne, I'm somehow unable to get exactly the same effect as what vj has in his screen shot. His screen shot showed that the numbers are nicely sitting in the centre of the phone buttons and the phone stretches all the way to the bottom of the screen. Mine looks different and ugly. The numbers are sitting to the extreme right edge of the buttons and there is a blank space at the bottom of the screen. I would like to fix this to look good
10) Spb GPRS monitor plugin has wrong sized font. As a result, I cannot see the download speed of my connection. The main application itself, which shows in chart form the usage has no problem. I have been looking for another product that works fully under VGA mode to replace the Spb GPRS monitor, but none of them gives me the download speed (They only shows the total MB downloaded, but not the Kbps info)
11)Pocket music. In landscape mode the option and playlist buttons are missing. In portrait mode there is no such problem. edit: this is not the vga problem,as it also behaves the same way I'm qvga mode.
12) Software Input Panel, or the soft keyboards, are soooo small, that they are unuseable. The standard big keyboard was nice as I can use my finger to type it without covering up the screen. If it is not possible to use the original soft keyboard, then I would like to use the HiKeyboard, because this keyboard has the ability to also do the job the the Spb full keyboard, as well as provide a calculator keypad. I like Hikeyboard the best, among all the ones I've evaluated. However, with MvrTrueVGA, I'd be forced to use only the resco keyboard. I prefer not to pay for resco keyboard, and to pay for Spb full keyboard, when I can just pay for Hikeyboard. I also much prefer HiKeyboard over Spb Full keyboard because it has the option to reveal what you have typed without exiting the full keyboard. Coming to the worst I'd get the Resco Keyboard although it is not as good as the Hikeyboard, so I supposed this is not the most seriuos matter.
13) Quick GPS program does not display correctly, and at the bottom of the screen display does not reach all the way to the edge of the screen. It looks ugly. Also, you can't see vital date and validity information on this screen.
14) Pocket Mechanics - The icons are too big and the characters are too small. It look real ugly as compared to the QVGA appearance.
15) My VOIP client SJPhone does not stretch all the way to the bottom. In landscape mode, the bottom part of the applications are cut off, while it leaves a big hole on the right. EDIT: qvga display landscape mode is also faulty I'm the same way.
16) In QVGA mode, my H and G indicator for data download has disappeared under true VGA mode. In place of the H (which means HSDPA connection is available), it shows the "connection is active" indicator instead.
In place of "HSDPA is in use" indicator, it shows just the signal strength without indicating whether I'm on a UMTS or HSDPA connection.
There might be more problems with other applications which I have not listed, and if you know of any, please add them in as a repository for all of us to look at.
It is possible that some of you have got solutions to the above problems.
If so, let's post the solution here, quoting the problem number if you can.
Thanks guys and gals
I'm not sure (and I'm happy if I'm wrong) but I think the best answer is:
"Yeah, but what'cha gonna do..."
WM5 is not intended to be used in full 640x480 mode, roumors will have it that WM6 is. So let's keep our hopes up.
But you obviously have more problems than me. Most screens are good and readable for me, except the phone (before applying VJBigPhone), Clear Storage, QuickGPS and the G/E/U/H icons + signal level. Of all these, the GEUH and signal level indicator is the only thing I "need" fixed (I can live with the rest).
Moskus said:
I'm not sure (and I'm happy if I'm wrong) but I think the best answer is:
"Yeah, but what'cha gonna do..."
WM5 is not intended to be used in full 640x480 mode, roumors will have it that WM6 is. So let's keep our hopes up.
But you obviously have more problems than me. Most screens are good and readable for me, except the phone (before applying VJBigPhone), Clear Storage, QuickGPS and the G/E/U/H icons + signal level. Of all these, the GEUH and signal level indicator is the only thing I "need" fixed (I can live with the rest).
Click to expand...
Click to collapse
Hi Moskus,
Thanks for the reply.
May I get more specific about what you're having?
a) You mean your soft input panel (on screen keyboard) is not too tiny? Are you using Resco keyboard to overcome the problem? Are you able to use the standard with no problem?
b) Your backlight adjustment screen is okay? Using the standard or replacement which consumes additional memory?
c) What about yout comm manger screen? Are you still using the standard or using a replacement which takes up more memory?
d) Your phone does not leave a hole at the bottom after VJbigpohne is applied? The characters on the keys are centered or also to the edge? I saw VJ555's screen shot and its as beautiful as the standard. Mine is aweful looking, although it works. Are you having the perfect looking screen just like VJ555's or are you putting up with the less than perfect looking screen?
e) Do you use SPbGPRS monitor? When you click the task bar icon, does the pop up screen display correctly? Or are you not using this?
f) Your quick GPS is displaying okay?
g) What is your ROM version?
h) What it your os language?
Thank you for sharing these information.
eaglesteve said:
Hi Moskus,
Thanks for the reply.
May I get more specific about what you're having?
a) You mean your soft input panel (on screen keyboard) is not too tiny? Are you using Resco keyboard to overcome the problem? Are you able to use the standard with no problem?
b) Your backlight adjustment screen is okay? Using the standard or replacement which consumes additional memory?
c) What about yout comm manger screen? Are you still using the standard or using a replacement which takes up more memory?
d) Your phone does not leave a hole at the bottom after VJbigpohne is applied? The characters on the keys are centered or also to the edge? I saw VJ555's screen shot and its as beautiful as the standard. Mine is aweful looking, although it works. Are you having the perfect looking screen just like VJ555's or are you putting up with the less than perfect looking screen?
e) Do you use SPbGPRS monitor? When you click the task bar icon, does the pop up screen display correctly? Or are you not using this?
f) Your quick GPS is displaying okay?
g) What is your ROM version?
h) What it your os language?
Thank you for sharing these information.
Click to expand...
Click to collapse
I think we have different "standards" for what the problems are.
a. I'm using the Resco keyboard, since the original is not showing up (as described in many other threads here and at the Qtek 9000 forum)
b. The backlight adjustment screen is OK.
c. The Comm Manager is "squished" but usable. I would prefer it if the icons were bigger, but I can use without any serious problems.
d. The phone does leave a gap at the bottom with the last displayed picture, and it would be nice if it didn't. But I can use the phone without problems.
e. I haven't tried SPG GPRS Monitor on this device. However, I do not have problems with the "home icon" that Magic Button is displaying in "Task Bar mode" and I can press/click on the other status indicators.
f. The QuickGPS application is also "squished" together as the Comm Manager is. But I can read when I last updated and I can find the "Update now" button without problems. I am able to use the program, but it could look nicer.
g. My ROM version is 1.25.409.2 (03/21/07).
h. My language is (not supprisingly) norwegian.
So TrueVGA is not perfect, and it probably never will be (until WM6 I hope). But I think the advantages (insert pun here) outweights the disadvantages. Using my Advantage without TrueVGA is not an option for me anymore.
I agree with you that it is not an option for many people. I guess I need to lower my expectation a little. It was just that after seeing the beautiful screen, the initial euphoria was somewhat dampened by the ugly screens for some places and for some program.
I'm using VGA mode most of the time, and use the largest font in the setting>system>screen>font selection due to the strain on my eye if I use other fonts.
One of the key problems that I had using trueVGA initially was that because I could not control the backlight setting, everytime I toggle to VGA mode, it revert to turning backlight off in 10 seconds. There is absolute no way to change it to stay on for longer time. So it was very frustration to look at an extremely dimmed screen which is totally unreadable outdoor. This problem seems to have gone away after two recent hard resets. With that problem gone, I guess I can live with the other imperfection
I had a simular problem with the backlight control --- I have installed "Todaywarrior" and I can control the backlight from the today screen now while in VGA mode.
leblancrs said:
I had a simular problem with the backlight control --- I have installed "Todaywarrior" and I can control the backlight from the today screen now while in VGA mode.
Click to expand...
Click to collapse
Hi leblancrs,
Thanks for this info. What can today warrior do? Does it let you specify the elapsed time before backlight is off?
what else can it do?
You have the website link?
Spb pocket plus can adjust backlight, but not the time elapsed setting, I think.
eaglesteve said:
Hi leblancrs,
Thanks for this info. What can today warrior do? Does it let you specify the elapsed time before backlight is off?
what else can it do?
You have the website link?
Spb pocket plus can adjust backlight, but not the time elapsed setting, I think.
Click to expand...
Click to collapse
Google is you're friend
http://personales.ya.com/beemer/todaywarrior1.htm
leblancrs said:
I had a simular problem with the backlight control --- I have installed "Todaywarrior" and I can control the backlight from the today screen now while in VGA mode.
Click to expand...
Click to collapse
Hi Leblancrs,
Downloaded that and tried it. Unfortunatley, this actually is not doing what I was talking about. While it provides a slider to control the backlight (which I can already do in many different ways without problem in VGA mode), it does not appear to have a facility to specify how many minutes must elapse before backlight is automatically switched off (battery and main would have a different setting of course). Or am I missing out something?
Well ive ordered one of these devices on the basis that Windows Mobile 6 offers VGA. Im pretty confident that is official not just hopeful but Microsoft have been known to dissapoint before.
If thats the case then I guess this device will be up on ebay pretty quick. Im not going through all the stuffing around for VGA like what you're all experiencing and like what I went through for Universal VGA. Despite the fact that converting to VGA seems to be a much easier process now.
Hhhmm
I have installed MW6 on my device and no native vga support I am afraid.
Oh well.
Those screens are way too small with VGA , like being blind!
spacecat said:
Those screens are way too small with VGA , like being blind!
Click to expand...
Click to collapse
No, it's not. It's like seing alot!
It's absolutely excellent!
Moskus said:
No, it's not. It's like seing alot!
It's absolutely excellent!
Click to expand...
Click to collapse
I used truevga for a while, although I didn't experience quite the same amount of problems as Eaglesteve I did have distorted comms and dialpad screens and was unable to change the brightness. There were a few other niggles but these were the prevalent one.
After getting over the novelty of tiny icons and lots of space on the today screen I eventually removed the program. Now IE and Opera support high resolution it seems like even less reason to use it.
There seems to be no REAL advantage to its use other than to view lots of icons at once.
Taking all the problems into account I can live with chunky icons - they're hardly offensive to the eyes. and I suppose didn't pay good money for a 5" screen to squint and have to get my pen out evey time I want to type something or navigate through menus.
Much as Microsoft DO neglect certain applications and functionlity with windows mobile I think that they have made a conscious decision not to use VGA and this decision would have been made for a reason, though we may never know it.
I'll install MVRTruevga again and give it another try now and see if my opinion alters......
leoni1980 said:
I used truevga for a while, although I didn't experience quite the same amount of problems as Eaglesteve I did have distorted comms and dialpad screens and was unable to change the brightness. There were a few other niggles but these were the prevalent one.
After getting over the novelty of tiny icons and lots of space on the today screen I eventually removed the program. Now IE and Opera support high resolution it seems like even less reason to use it.
There seems to be no REAL advantage to its use other than to view lots of icons at once.
Taking all the problems into account I can live with chunky icons - they're hardly offensive to the eyes. and I suppose didn't pay good money for a 5" screen to squint and have to get my pen out evey time I want to type something or navigate through menus.
Much as Microsoft DO neglect certain applications and functionlity with windows mobile I think that they have made a conscious decision not to use VGA and this decision would have been made for a reason, though we may never know it.
I'll install MVRTruevga again and give it another try now and see if my opinion alters......
Click to expand...
Click to collapse
There are also a number of apps that look pretty strange with MvRTrueVGA. But I'll put up with some cosmetic defects for functionality. I just love being able to see a couple days of appointments, device status, weather info... plus an ilauncher strip, all on my today screen!
wgary said:
There are also a number of apps that look pretty strange with MvRTrueVGA. But I'll put up with some cosmetic defects for functionality. I just love being able to see a couple days of appointments, device status, weather info... plus an ilauncher strip, all on my today screen!
Click to expand...
Click to collapse
I had the same excitement myself initially, though I found it difficult to press these icons with my fat fingers and inevitably decided that it was easier to just navigate to the program folder and leave essential apps for the today screen. I hope a new VGA solution is developed soon which makes the icons a bit bigger and throws up less garbled screens and program glitches.
In the interim does anyone have link for how to alter the sidebar/ softkey size so they look like thse in MVRtruevga? my internet is very slow on my phone today so searching is proving very frustrating.
Moskus said:
No, it's not. It's like seing alot!
It's absolutely excellent!
Click to expand...
Click to collapse
your opinion dude , in mine its WAY too small, its not like you need to see so much at once . Who needs the eyestrain
leoni1980 said:
There seems to be no REAL advantage to its use other than to view lots of icons at once.
Click to expand...
Click to collapse
Have you ever tried editing an Excel-spreadsheet or Word-document using MrVTrueVga? It's a must.
spacecat said:
your opinion dude , in mine its WAY too small, its not like you need to see so much at once . Who needs the eyestrain
Click to expand...
Click to collapse
Sure it's my opinion, I was just commenting yours...
(To me) There is no eyestrain, so I don't "see" ( ) the problem...
Moskus said:
Have you ever tried editing an Excel-spreadsheet or Word-document using MrVTrueVga? It's a must.
Click to expand...
Click to collapse
It is certainly easier to edit word and excel documents in VGA mode - I'm surprised MS didn't create a highres option for their office apps like the one in PIE.
You can change the default font size via the system>screen menu instead of switching to VGA for a slight improvement.
I saw an extra large X button in relation to a battery status theme....got me to thinking....could someone perhaps create a battery status theme that will provide only the large X button which would make closing apps thumb friendly for recessed screens......themers?....skinners?......I'm sure the entire community can appreciate such a simple app
+1 for this
+1
for finger friendly X-Button and Task Manager
ok i've been looking for just a larger x-button is this already possible (i have a clear case on mine)?
im using duttthroy's latest rom on kaiser
Thanks!
i so totally concur on this. we need a thumb sized x-button badly. I'd try gestures, but they don't seem to work
You can try this theme for battery status?
http://forum.xda-developers.com/showthread.php?t=386378
I think that the easyest way would be to alter HTC Xbutton2. there is no reason to have some app attached to it. the problem with so many apps for the ppc is that they have too much shtuff bundled with them. so the end result is like having an XP comuter running Vista. the simpler the better. what would be better still is to hack into the system it self and find the actual size of the real button itself and change that. perhaps another thing that most people can do now (which does not always work) is increase the sensitivity of the touch screen; as well as install the new version of touch.dll I found that installing the new one helped me out xuite a bit. I use my pinkey to close button... with a Wizard and a case... which makes the screen even more recesesed than normal. it seems to work well.
I agree however that this needs to be done. would be a perfect size .75cm.
No takers on this one? Is this about to die a death?
Seems to be a lot of interest in having a larger, finger friendly X button available as I found to my cost the othr day.
Is there no developer that can take this on, perhaps with some financial inducement?
WB
like this???
http://forum.xda-developers.com/showthread.php?t=386378&page=11
Is this what you're looking for?
http://forum.xda-developers.com/showpost.php?p=2151932&postcount=1
I personally use the "Active Corners" feature of FTouchSL 2.7 as my extra large X button. Once pressed I have it assigned to close the active program on screen regardless if it has an [X] or not. It is by far one of the handiest features.
there are many WKtask users out there, is there a thumb sized X that is compatible with WKtask? You cant use WKtask and HTC Task manager at the same time can you?
i try:
regedit()
HKLM/Drivers/TouchPanel - PressureThreshold to 80866
HKLM/Software/OEM/TFLOSettings - FingerPressure to 1
Soft-Reset
It's the same of DIAMOND
I think this improve the speed reaction of touch screen
Are you really so unhappy with the standard settings? I have no problems with the response of my display, but maybe I'm just pressing hard enough .
This is a good CAB, worth a try,
http://forum.xda-developers.com/attachment.php?attachmentid=149174&d=1232643110
Got it from here,
http://forum.xda-developers.com/showthread.php?t=469865
It is just a reg tweak and easily uninstallable.
I like it.
I'm still curious about what the registry change is.
On my Diamond I set Finger Pressure and Pressure Treshold to 0 for best sensitivity. For the Xperia to be max sensitive I had to set 99999 to both Finger Pressure and Pressure Treshold.
So, what is the setting with the Blackstone?
Just do the screen calibration as gently as possible, that way you'll get a very responsive screen
fards said:
Just do the screen calibration as gently as possible, that way you'll get a very responsive screen
Click to expand...
Click to collapse
I know about that, I just want to know the optimal values so I can get it right every time with a minimum of fuss.
losdrivare said:
I know about that, I just want to know the optimal values so I can get it right every time with a minimum of fuss.
Click to expand...
Click to collapse
You can also adjust the threshhold using HD Tweak saves changing the registry
I have both set to 0 and my screen feels very responsive.