I have a problem, i have bought in ebay a HTC Touch S1/P3450, and THE "·$%&/(~€¬ seller have sent me a Fu"%&ing Chinese Clon, im live in Colombia, and i cant send it back ¬¬, i need to chage the room, but i have tryed with alll roooms in the planet, and alll boots, and it dosnt works ¬¬ i cant login in the boot screen (3 colors), please can i flash the room, i want WM 6.5 in my Touch, please help me!
Thanks
Santiago Forero
Bogotá, Colombia
Hi
Sorry to hear that, but as far as I know, you cannot flash a rom on a chinese elf clone, but it's also possible it's a chinese elf not a clone. Have you read this http://forum.xda-developers.com/showthread.php?t=398965&highlight=chinese+elf+clone ? anyway do a search with these keywords in elf upgrading and elf forum.
Good luck
Ohhhh!!!....thanks, im so sad because i cant flash the rom, can youy say me how i seee if its a chinese Elf or a fake....
must be some way to know if Chinese or copy, because if Chinese if I change the rom, please tell me if there is any way to check.
Thanks!!!
the Chinese versions of these phones are called DOPOD's and if its an S1 you are looking at a Dopod S1 same as the elf or elfin with alot of the stuff removed.
its ebay if you new it was coming from HK then you should have thought about it. and how cheap did you buy it
i bougth it for 169 bucks coming from california.....
and its all that i know....
Thanks!
Sforero said:
i bougth it for 169 bucks coming from california.....
and its all that i know....
Thanks!
Click to expand...
Click to collapse
Press Green bUtton+Center Button+Powerbutton That is to Hard Reset Your Mobile..
solai_4 said:
Press Green bUtton+Center Button+Powerbutton That is to Hard Reset Your Mobile..
Click to expand...
Click to collapse
it doesnt works....
Don't worry. I do have the same clone machine, I think.
You do need to do that with the device off or standby (I tried standby and worked). Also, the buttons pressing must be for some seconds (say 10 o more).
First press both red & green buttons and keep them pressed, and then press the power button (on top) and keep the three buttons pressed for +10 seconds or up to the moment you see ALL BLUE SCREEN. Then release the buttons.
In my case, I was searching for a solution after installing the WM6 SDHC drivers as directed (replacing dll files and the like) but then my device didn't recongnized a Kingston 8GB SDHC miniSD nor my previous 2GB miniSD.
After this Hard Reset procedure all returned to normal so I could restore my last backup file from card.
i have wm6.5 rom but it's chinese langue.
Related
please help! I have made a wrong ROM Update for my Artemis. The result is that it doeasn`t starts anymore. I see only the start screen no more. If i make a SW or HW reset tahn i see a 3 colored screen and USB. But i don`t get a connection via usb to my compute`! How can i wake up my Artemis ???
tell use more what did you do and how did you do it?
what artemis is it?
what rom was it
Flash went sour..
You need the original ROM which was on your device when you bought it. What version (HTC, MDA, etc..) and what language was the original ROM?
please i need help too
I guess I made the same or a similar mistake that dr.moppi did. My machine is a Dopod P800 from mainland china with the chinese operating system. I flahsed it with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap. Don't really remember what the original ROM was but now when i turn it on it freezes when it lights up. On the screen, it says
IPL 1.27.0001
SPL 1.27.0000
GSM 02.67.90
OS 1.28.0.0
DOPOD
I don't get a connection through usb to the computer either. I am not sure if I did the hard reset correctly. Didn't understand the instruction on that "press the soft key left and right and soft reset at the same time." Anyway, you guys are all experts, can you help me please?
it should be the same as my problem
if i remeber than i used the same ROM Update :-(
I hope anyone could give us a solution, please.
@dr. moppi we can only help you if we know what version you had before.
@empathyvirus you have to look for the original ROM which, in your case, should be the Chinese Dopod ROM. Install that one and your good to go.
Without the original ROM the only thing left to do is: sending your device to your provider or contact and sent it to the guys of imei-check. Either way, you'll probably have to pay to get it fixed.
how to install original rom
Thanks for your quick reply Pyth. In the case I get the original ROM from somewhere, how do I install it if I can't get a connection between the phone and my computer? Can you advice?
Put your device in bootloader by pressing the record button and reset at the same time. If you have your USB-cable connected between your PC and your phone it will indicate a connection by 'USB' in the left corner of your device. Now you should be able to run the ROM executable and update your device.
thanks anyway
i tried but it didn't seem to work. anyway, i have troubled you enough and maybe it's best i just go to the repair centre of dopod and pay for a fix. i really appreciate your help though Pyth.
Where can i find the t-mobile rom its the MDA Compact III that wont start for me
Hi,
Is there anyone out there with their Polaris trapped in Tri-colour (and not running a .Olipro/.OliNex SPL). if so, PM me.
Me
Olipro said:
Hi,
Is there anyone out there with their Polaris trapped in Tri-colour (and not running a .Olipro/.OliNex SPL). if so, PM me.
Click to expand...
Click to collapse
Program stopped in percent screen (in 0%) and don´t run more. After if you unplugged the PDA (an HTC Polaris, of course) and swich on don´t pass of the Tri Color screen and you can read "POLARIS. SPL-1.25.0000.CPLD-2" and in the rigth corner "RUUNBH" but nothing began, no OS or programs, nothing... Any suggestions and help??? Thank You.
Can't flash SPL, Polaris FRA ROM; was bricked...solved,can't flash
Hi Olipro,
last week-end I tried flashing hard SPL v2 on my French Polaris, before planning to flash the new radio 1.64, then bepe's 0.66 ROM.
I spent the first part of Saturday night trying numerous times, recovering, taking battery away, and trying agin - never worked. Then I tried flashing the 1.64 radio, it went up to 99%, then stopped, error message: from then on my Polaris went to boot-loader only, after soft reset or even hard resets. Until dawn I tried to fix this (I'm not a developper, I'm a power user travelling 4 days a week by plane accross Europe). Couldn't fix it.
On Sunday I called a friend of mine who imports HTC and sells the channel: I gave him my Polaris and he took it with him to fix it. Result was very surprising: I had given him your hard SPL v2, and a few nice ROM's from this site, specailly bepe's, as well as all the radio versions listed here for POlaris; well none of all that worked with him, and he could only reflash the official ROM and radio, and return it back to me...(which was very kind as it took him some time).
BUT, overall I'm very frustrated as I'm an early adopter, and I would so much like to try cooked ROM's on this fabulous device.
What do you think I should do? Any idea?
Is there a way to guide me though a custom process or is there a real issue on ALL French ROM's out there? (can't believe that).
Your inputs would really be appreciated.
Thx many, HangLoose.
23:45 > it finally worked !! (I must have been doing something wrong previously, sorry for bothering Olipro).
And thx for enabling us to use best in class cooked ROM's from this site.
I'll be loading bepe 0.67 just now. !!
Regards, HangLoose59
My cruiser not leaving the screen tricolor
My cruiser not leaving the screen tricolor, Tried to replace the original language (Spanish) by the English and upgrade stopped in 14%, dai then not leaving the screen tricolor.
Some hint.
v1zca1n0 said:
Program stopped in percent screen (in 0%) and don´t run more. After if you unplugged the PDA (an HTC Polaris, of course) and swich on don´t pass of the Tri Color screen and you can read "POLARIS. SPL-1.25.0000.CPLD-2" and in the rigth corner "RUUNBH" but nothing began, no OS or programs, nothing... Any suggestions and help??? Thank You.
Click to expand...
Click to collapse
FIXED! at last the problem was I used a SPL for HTC ELF not Polaris and, I don´t know why, that makes OS stopped in an eternal bug... Whem I use again the same Hard SPL for Elf Voilá! Do it! And know all works fine. I promisse: I will never change the BootSplash be sure
v1zca1n0 said:
FIXED! at last the problem was I used a SPL for HTC ELF not Polaris and, I don´t know why, that makes OS stopped in an eternal bug... Whem I use again the same Hard SPL for Elf Voilá! Do it! And know all works fine. I promisse: I will never change the BootSplash be sure
Click to expand...
Click to collapse
I have the same problem My Pc has scrached and now my polaris is blocked to the bootloader
Is some could you help us ?
Diagorn said:
I have the same problem My Pc has scrached and now my polaris is blocked to the bootloader
Is some could you help us ?
Click to expand...
Click to collapse
Hard reset the device and it can take u out of bootloaer mode. To hard reset:
GPS/MESSAGING and INTERNET EXPLORER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
2. Release the RESET button, but continue pressing the GPS/MESSAGING and INTERNET EXPLORER buttons until you see a message on the screen
Release the buttons, and then press SEND on your device to perform the hard reset, or press any other button to cancel the reset.
Hello thanks for your help but I have already tried this
Diagorn said:
Hello thanks for your help but I have already tried this
Click to expand...
Click to collapse
Try with this program do a Hard SPL and tell me how gone
the Elf is a DiskOnChip device, the Polaris is plain NAND.
you can try it, but frankly, I think it's not really the smartest move
Olipro said:
the Elf is a DiskOnChip device, the Polaris is plain NAND.
you can try it, but frankly, I think it's not really the smartest move
Click to expand...
Click to collapse
You are rigth Olipro as always, but I left because I have the experience of used badly and block the PDA until I use again and unblock the machine. Maybe the diferent chip make a kind of bug than only can be fixed with Elf Hard SPL I don´t know but with me works. Let see if is the same with Diagorn
could be a side-effect, but the file should be blocked from flashing anyway.
i have the problem too. waiting for the solusion
Olipro said:
could be a side-effect, but the file should be blocked from flashing anyway.
Click to expand...
Click to collapse
Curiously Elf SPL unblock the flash and I don´t know why Anyway I stopped flashing anymore because I don´t want have the same problem again. Only I explain what happend to anyone that can have the same problem and attach the Elf Hard SPL if they want use and probe
BT Problem
The BT LED styed ON and after hardware reset (removing the battery, the reset button wasn't working) only the bootloader screen. It revived after I flashed the Radio ROM. And what bugs me is that BT button remains ON in TouchCommander, but NO BT. any ideas???
BT Problem
After synchronising with the PC i noticed the BT LED goes OFF ...
BTW
HardSPLv2.2
ROM 1.28Aserg.1WWE
RADIO 1.64.08.21
Cruise stuck in 3-color screen
Hi,
My Cruise just frooze, during GPRS synch with Exchange server. Soft reset and hard reset do not work anymore. If I take out the battery, and then switch on the device it stops in the 3-color screen. BT light stays on.
I have not made any changes to my Cruise, only added a 8 Gb SD card.
v1zca1n0 said:
Program stopped in percent screen (in 0%) and don´t run more. After if you unplugged the PDA (an HTC Polaris, of course) and swich on don´t pass of the Tri Color screen and you can read "POLARIS. SPL-1.25.0000.CPLD-2" and in the rigth corner "RUUNBH" but nothing began, no OS or programs, nothing... Any suggestions and help??? Thank You.
Click to expand...
Click to collapse
me too...somebody help !!! sorry my english
Strangely enough it works!!!
v1zca1n0 said:
Try with this program do a Hard SPL and tell me how gone
Click to expand...
Click to collapse
I was really frightened when my TC got stuck in Tri-Colour screen. MY Polaris came to standstill, trapped in.
Over and over ROMUpdateUtility.exe shows ERROR [262 or 284]: UPDATE ERROR while trying update.
And only this strange RUU gave me other ERROR [296]: UPGRADE ONLY that helped me to quite out the three-color screen and installed new radio successfully.
hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks
PlasticFX said:
hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks
Click to expand...
Click to collapse
You need to Cid unlock your mobile to flash with **** Roms
http://forum.xda-developers.com/showthread.php?t=293957
but i have flashed with cooked rooms.. and i want to put original to send to HTC because my pda have some problems.
its only need update with original rom? must remove hard spl (olipo v1.30) ?
and how?!
i don't think you can ... as your boot screen always shows even if you flashed FULL ROM from original (include SPL, radio, rom....)
when i press cam, power and reset button, i got this:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
(no more hard-spl 1.20 i think) is this ok ?
when i power on normaly, it shows the white screen "HTC" and some numbers and radio version.
Then the screen without the numbers and goes to WM5 that I updated from the file HTC P3600_RUU_Trinity_HTC_PTG_1.23.4...blabla.....
i think my p3600 is original ? and can i sent to the manufacturer now ?
(because my screen, somethimes have some lines and i must reboot, and then, sometimes the screens stills black..) :/
I have a HTC ELF 0100 i want to change the language to english but i cant make anything. I try to hard reset the phone but this also is impossible. there is Windows mobile 6.1 installed in it.
Things you might need to know:
I HOLD the green and red Button and click on reset - for hard reset but nothing happens
To update an english rom i need to CID unlock. but this also fails saying ERROR 260.
And when try to upload a COOK rom it says ERROR 260 and the HTC screen become black i.e standy mode. it does not goes to the BOOTLOADER mode!
Where is the PROBLEM please help urgent !!
im sorry to tell u, but probably u dont have and elf. its a clone.
search the forum for clone info.
But i can assure you it an original one. Not clone or china made. But one things is that the battery is not an original one.
But i can assure you that the mobile is original. Not a China made.
zakiyy said:
But i can assure you it an original one. Not clone or china made. But one things is that the battery is not an original one.
But i can assure you that the mobile is original. Not a China made.
Click to expand...
Click to collapse
Use dsixda's All-in-one tool (http://forum.xda-developers.com/showthread.php?t=418892 ) to find the specific type of your phone.
Than we might be able to help you.
Dala11 said:
Use dsixda's All-in-one tool (http://forum.xda-developers.com/showthread.php?t=418892 ) to find the specific type of your phone.
Than we might be able to help you.
Click to expand...
Click to collapse
Hi man thx for the REPLY but this also i tried !! it does not shows anything !! Only giving Data UNKONw or something like that!
I was able to install ENABLERAPI.cab to make the above PROGRAM work.
i want to know why the ElF is not able to HARD RESET.... I HOLD the TWO BUTTONS [red&green] and PRESS RESET but it never enter the HARD reset..
Very Strange and time comsuming for me i need a REAL solution !!
zakiyy said:
Hi man thx for the REPLY but this also i tried !! it does not shows anything !! Only giving Data UNKONw or something like that!
Click to expand...
Click to collapse
Big chance your phone is a fake.. I'm sorry man..
Perhaps if you posted some pictures of your device (also the backside without the cover, and one without the battery) some might be able to help you figure out what's going on.
Hi
All what you mentioned : No hard reset, No bootloader, No Data with mtty mean one thing this is a chinese clone of ELF and you will find no solution here
Hard reset htc touch elf
hi everybody,
Please help me with my htc touch elf,
I try to hard-reset my htc that have windows 6.5 because of I can't run completely windows and can't soft reset it.
Please help me
Thanx !!!!!!!!!
HEY maaan !
just press the power off button + the camera button and the tri-color screen will be appeared
hi,
My volumeUp and Volumedown buttons are broken (don't works when i push it) and I MUST use a bootloader procedures tu fix a original ROM in my HTC HD to bring it to repair and check wich SPL is installed. (no HSPL for warranty!!)
is there some procedure or sw to put my HD in bootloader? MY actual ROM installed is TIM_IT_1.13.401.0 and Radio_52.49a.25.26_1.09.25.14. I think that I put the original ROM on it but I must be sure to had put a original SPL and not HSPL (for warranty)
Is there a procedure to check it whitout put it in bootloader mode?
Thanks
I have this problem to. My volume button down is also broken, and I'm no longer able to lower the sound. Sound buttons are one of the most important functions of a phone. I e-mailed HTC for this and they replied back that broken volume buttons aren't appearing on the Touch HD's. No warranty, no option to repair it. I've sended a lot of pictures of the broken button, but they didn't respond to my e-mail. Keep in mind when buying a phone next time: If you wan't better service and support I think you have to search for another company next time. Sorry, but I don't appreciate this kind of service. I have decided not to buy a HTC phone again. I'll try to find another brand who cares about service and keeping customers happy. HTC = game over for me now, even if they bring out the best phone in the world.
I am using the Ruu.exe file to flash a rom. This is the only way I have found. Only problem is I can't lower the sound immediatly when I need it and can't flash all roms because some doesn't have a RUU file included.
Good luck!
Hi,
very bad situation! I don't know here in Italy what a HTC will answer me! For the moment I must try to put my phone in the original condition; I Flash the original ROM whit RUU and also a SPL (maybe) I MUST CHECK MY SPL VERSION... and I can't if I cant Reach a BOOTLOADER STATUS.... Nobody know if there are some other procedures or software to reach it?
Was anyone able to figure out how to fix this issue?
Because this is my first post, i am not able to post a link of what i found.
On ebay itself, there is the button for sell, but i don't think that would fix it.
Ok,
Here you have, copy the exes to your device first.
EnterBootloader.exe will put your HD into bootloader (the installed one)
Manual-SPL.exe will put your HD whith an special bootloader allowing overwriting the HSPL
HelpMe - LCD problem
Dear Friends
Yesterday I dropped my blackstone and now there is no display at all (except one vertical light almost two inch width) and the remaining parts LCD is blank. but works perfectly as i feel vibration when i receive calls.Pls help me
hayyan said:
Dear Friends
Yesterday I dropped my blackstone and now there is no display at all (except one vertical light almost two inch width) and the remaining parts LCD is blank. but works perfectly as i feel vibration when i receive calls.Pls help me
Click to expand...
Click to collapse
you can try to learn HTC_Blackstone_Service_Manual that can be obtained from http://www.mikechannon.net/page1.html
Hakim Rahman said:
you can try to learn HTC_Blackstone_Service_Manual that can be obtained from http://www.mikechannon.net/page1.html
Click to expand...
Click to collapse
Thanks for the reply, i checked this but the problem is i cant see anything on screen!! but i m sure there is no crack at all (no visible crack - what inside i dont know) any way thanks for the reply
mac_es said:
Ok,
Here you have, copy the exes to your device first.
EnterBootloader.exe will put your HD into bootloader (the installed one)
Manual-SPL.exe will put your HD whith an special bootloader allowing overwriting the HSPL
Click to expand...
Click to collapse
Many thanks. Had the same problem on my Blackstone (broken volume button) and couldn't get it into the Bootloader. You .exe file solved the problem!