Hi,
I have been suffering with a persistant Activesync connection problem. It usually connects and syncs fine the first time I boot my machine, but after around five minutes it almost always disconnects (though my Vario II continues to charge). Unplugging and replugging the USB cable does not work and the Activesync icon remains grey. Trying to start the connection manually either from the Vario II or from Activesync on the desktop also does not reconnect the device. In fact the only way to get it to connect again is to reboot my PC.
I'm using Activesync 4.2 downloaded from Microsoft this morning. I've tried deleting and recreating the partnerships, which does not help the issue. I've tried several USB cables which also do not resolve the issue, so I am now asking for your help.
If anyone has any insights into whaty might be happening I would appreciate your help...
Thanks,
Chris
I'm having the same problem, but in my case unplugging the cable from the device and plugging it again usually restarts the sync. Sometimes, however, I have to soft-reset to get it working again. Very annoying.
Hi Chris,
Ive had tons of issues with activesync on my works laptop..... I use a VPN and zonealarm... I used to have tno issues but since I got WM5 wich uses IP address's it always does the same thing as yours.. ive made sure the IP address is allowed in zone alarm.... my colleague also had this issue.. he managed to solve it by using a differnet USB port as his laptop has 3 one is on the side of the machine ... try using a different USB or disable zone alarm if you use it this could be causing the problem.
I sometimes get it to work if I have no VPN client running but as soon as I do use it the active sync stops.
Hope this may help you
James
I have exactly the same issue with my Vario II, never happened with my Vario and I have changed nothing other than my phone. Makes me think its summin to do with the harware possibly? Anyone else found a cure for this?
I Had the same problems, so I gave up on USB connection with active sync, I have 4 USB ports on my laptop and tried all, I now use bluetooth and works everytime.
There has always been problems with USB and actgive sync, so 4.2 was suppose to fix, but not for me.
I've got the same probelm on my Tytn. I've solve it to delete the Pocket Mechanic :shock: , I've done a S.R. and from now on the A.S. works correctly.
Ciao, Cesare
Had to use my old vario for a bit today, used activesync and it worked fine for the whole time I had it plugged in, got a new Vario II replacement today, got home and its exactly the same, would appear to be a mismatch between Vario II and activesync 4.2, can I connect by wifi?
Hello hmm the problem is if it uses direct or ip ,try go settings - connections - ( usb to pc ) and disable advance network funtctionality.
Hope that works
thanks
I had this problem too - I disabled advanced network capabilites in the "USB to PC" control panel under the Settings/Connections folder, and then Activsync stayed connected after that.
HTC TyTN 7/22/06 ROM
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
After the activesync working fine with my orange spv3100 for 4 weeks it suddenly refused to connect. I un-checked the "advanced functionality" box as suggested and it works again. Many thanks for the solution peeps.
I too would like to know what functions this deactivates.
Same problem, I've installed ActiveSync 4.5beta and now it stay connected, sometimes it disconnects but after restart of the phone it works again, one friend told me that the problem comes from the Activesync in the phone, so may be we have to look for the problem in the phone not in the PC
Activesync 4.2 problem
Hi all,
I too started having the same problems with Activesync 4.2 hanging my phone if left charging overnight. I decided to disable the advance network connection and that worked for a while. Now the phone wont sync AT ALL. It charges, but I can't do anything else. I reinstalled the Activesync 4.2, did a soft reset, off-on to the mobile, turn off-on my computer and still nothing. I will d/l Activesync 4.5 beta to see if that solves the problem, but it looks to be a problem with the Activesync in the mobile and not the one in the computer. I did the troubleshooting and it is detecting the USB connection but does not sync. I would really like to know if wireless sync can be achieved. Will post any fix if I find one. BTW my mobile is about a month and a half.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
pls help here im tired of this activesync problem
thank you
Sync problems with tytn
I've read through all the messages in this thread and wondered if someone could help me with some problems i've been having with syncing mine with a laptop. Often when I have the device plugged in when i boot up the laptop activesync won't start until i've disconnected the usb cable then reconnected it again-i never had this problem with the imate jam. My second problem arises when sometimes it says on the files section that there are un resolved items???? i then try to resolve the issue and a wizard comes up with add or remove buttons.afraid that i might remove something essential i tried the add button hoping this might resolve the issue-it didn't. i then gave up as nothing worked. after switching the laptop off and then syncing a day later there were no items to resolve so what exactly is happening. how can there be unresolved items one minute and nothing the next.also i hadn't done anything different on the tytn.if i select the add button on the window does it add a copy of the file highlighted and could this affect the operation of the device.Sorry if this seems a little confusing but i never had this problem with an xda exec or an imate jam.
please could someone help a non technical fifty something.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
I agree, where is this option?
I'm running version 4.2 and along the top bar all I'm seeing is:
File - View - Tools - Help
Nothing like "Settings" and/or "Connections" in sight. Under "File" there is the "Connection Settings" option, but nowhere does it mention "Advanced Networking Functionality".......
Can someone explain this please?!
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
pof said:
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
Click to expand...
Click to collapse
Every time I try that, I just get an error message saying: "Failed to disable RNDIS to use Serial".
Has anyone else seen this message? Happens regardless of whether the Vario II is connected by USB or not...
Thanks,
Chris
I'm still getting the RNDIS error, has anyone else come across this? Is there a solution?
Cheers,
Chris
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync programm and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can slove this problem?
Have you try to use it as a Modem for an apple copmputer?
Thx a lot Guys!
Try this: go to Settings, Connection, USB to PC and uncheck "Enable advanced network functionality". This way the phone should be recognised as a USB modem.
(I don't have a Mac so I haven't tried this myself)
thx i try it but it doesn`t work!
I try on xP and i have the same problem!
BrigateGB said:
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync program and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can solve this problem?
Have you try to use it as a Modem for an apple computer?
Thx a lot Guys!
Click to expand...
Click to collapse
I certainly have been trying... the first thing that I find is that when I connect it to the Apple using the USB cable is that it doesn't recognise it. Has anyone had more success with this? The only problem is that I can't remember what happened when I first connected it - perhaps it asked me to set up a connection and I got it wrong. This is my first return to Macs in ten years, so I was a little overwhelmed by trying to get familiar both with it and with a new phone (Dopod D810).
If I did set up a connection... (!) then I think the connection is called "SerialPort-1", and the network report says that it is configured, but not connected. I don't seem to be able to delete it and start again. Maybe the Mac isn't even recognising the USB connection?...? Any feedback would be much appreciated!
This has been discussed many times - no DUN service with Trinity ...
But no problem going online with your MacBook. Make sure you update to the latest OSX.
Then delete old bluetooth connections to Trinity on your MacBook and reconnect using bluetooth
Then start Internet connection sharing on your Trinity - then click on the bluetooth symbol (top right) on your MacBook and choose the New Option connect to Bluetooth Pan (your owner name)
Hope it helps
Hi all. First time poster, long time lurker -- this place is as you know, awesome. I am sure someone here can help me with my bone-headed move.
Long story short: Recently reimaged my Kaiser Wm6.0 (step 1) and all was working wonderfully. Then one night I got drunk (step 2) and had some networking problems on my PC, XP Sp3, ActiveSync 4.5. I fiddle around with networking stuff, nothing out of the ordinary, but at one point I check out my network control panel and I see a NIC for the ActiveSync connection and figure "what the hell" and I delete it. My connection to the mobile drops, of course. Not surprisingly this was not the cause of my networking problems.
My problem is that since then, i have only been able to connect via ActiveSync in "standard" mode; i have to keep the "use advanced networking features" for the USB to PC connection unchecked. If I try to check it, i get the three fast-fail connection error audio on my PC and active sync will not connect.
Clearly when i deleted the NIC on my PC i porked this up somehow, but I can't figure out how to regain that functionality. I don't see any hidden devide in device manager.
Anyone got any help for a foolish troubleshooting drunk?
Many thanks for all the help this site has given me over the years, and of course thanks in advance for any help with this issue.
Cheers
-lode
bump.
No help? Am I asking a silly question?
lodester said:
bump.
No help? Am I asking a silly question?
Click to expand...
Click to collapse
Unistall ActiveSync, reboot and reinstall it
My wifi icon is greyed out meaning I can't turn in on? Any else got this problem?
Is your device connected with a pc in activesync mode?
Wi-fi cannot be used if you're syncing your device.
Legend, cheers. Thought i disabled it, but the cable was still in.
Thanks again mate.
Hi guys! I'm having a problem with the Wi-Fi connection in my phone. Yesterday i've installed the XGin3.0 2.3.4 ROM adding the wifi fix update (just because my phone were rebooted each time for wifi bug). It well worked yesterday and this morning, at home and in other oper wireless connections. But since I came back to home, Wi-Fi refuses to connect to router (it says "out of reach"[!!!] and wifi manager doesn't list nobody wireless connection) ... and I don't know why!
Can someone help me?
P.S. Sorry for my bad english!
Does it say "disconnected" right after "out of reach"?
Chris95X8 said:
Does it say "disconnected" right after "out of reach"?
Click to expand...
Click to collapse
Thank you for reply Chris. No, my wifi did not connect anyway, just like starvation... I solved making a backup of apps and data... and then by using factory reset. Now wifi works well and I hope to not have similar problems in future.
Do you know what can be happened? Maybe a module bug?
Thanks again!
Oooh! Maybe you're right. Now I'm thinking about that! Wifi connection did go "in connection" and then "disconnected" just like in a loop. But anyway it did not scan nobody wireless (mine and neighboor)...
achill3r said:
Thank you for reply Chris. No, my wifi did not connect anyway, just like starvation... I solved making a backup of apps and data... and then by using factory reset. Now wifi works well and I hope to not have similar problems in future.
Do you know what can be happened? Maybe a module bug?
Thanks again!
Oooh! Maybe you're right. Now I'm thinking about that! Wifi connection did go "in connection" and then "disconnected" just like in a loop. But anyway it did not scan nobody wireless (mine and neighboor)...
Click to expand...
Click to collapse
The disconnected bug happens to me all the time! I just forget all networks, turn on wifi and reconnect...or just restart my router
Eh.. not to me! I tried to restart router, forget networks and so on.. but without success! I had to do a factory reset!