Database Users

Sync Problems with wizard and MS Active Sync 4.1

Hey guys,
Ok this sync is really bugging me, first it took me ages to work out why when i plugged it in the connection went green ina ctive sync and said connecting but wasnt working no matter how long i gave it - turns out it was a firewal problem,
but now when i plug in my wizard and the wizard says connecting under active sync but my computer active sync doesnt do anything, i tried switching usbs restarting both PC and Wizard to no avail, i know my PC is seeing somthing there because it says at first (when i plug into new USB port) found device etc etc, but then it installs it as a network connection and trys to aquire an IP/Network address from it!! that doesnt seem right to me!
Any advice would be great
Thanks
Nathan

hmm has anyone with a working active sync noticed if its installed as a network device for you? does the wizard work as a USB - GPRS modem? because that would explain that bit.
Thanks

Hmmm...
I'm gonna guess that no one is responding because you've basically said some things that lead everyone to believe you've not researched your device or problem before starting a new thread about issues that have been covered time and again.
First, by default Windows Mobile 5 (WM5) connects using the Network Connection method. If you want to use the old USB Serial connection your will need to upgrade to an AKU 2.2 or AKU 2.3 Rom.
Second, if you use the search function (see the top center of the screen) you will find numerous threads discussing several issues with ActiveSync.
Newbies are always welcome but you need to at least try to find your answers before just plopping donw a new thread.

Hi,
I did a search, and tried most of the suggestions, but i dont get this AKU2 thing? and couldnt find a deifnition.
but anyway im since broken the phone so thanks anyway guys

Check your vpn option and firewall option. If you using cisco vpn then uncheck "statefull firewall (always on)".

Activesync Disconnects

Hi,
I have been suffering with a persistant Activesync connection problem. It usually connects and syncs fine the first time I boot my machine, but after around five minutes it almost always disconnects (though my Vario II continues to charge). Unplugging and replugging the USB cable does not work and the Activesync icon remains grey. Trying to start the connection manually either from the Vario II or from Activesync on the desktop also does not reconnect the device. In fact the only way to get it to connect again is to reboot my PC.
I'm using Activesync 4.2 downloaded from Microsoft this morning. I've tried deleting and recreating the partnerships, which does not help the issue. I've tried several USB cables which also do not resolve the issue, so I am now asking for your help.
If anyone has any insights into whaty might be happening I would appreciate your help...
Thanks,
Chris

I'm having the same problem, but in my case unplugging the cable from the device and plugging it again usually restarts the sync. Sometimes, however, I have to soft-reset to get it working again. Very annoying.

Hi Chris,
Ive had tons of issues with activesync on my works laptop..... I use a VPN and zonealarm... I used to have tno issues but since I got WM5 wich uses IP address's it always does the same thing as yours.. ive made sure the IP address is allowed in zone alarm.... my colleague also had this issue.. he managed to solve it by using a differnet USB port as his laptop has 3 one is on the side of the machine ... try using a different USB or disable zone alarm if you use it this could be causing the problem.
I sometimes get it to work if I have no VPN client running but as soon as I do use it the active sync stops.
Hope this may help you
James

I have exactly the same issue with my Vario II, never happened with my Vario and I have changed nothing other than my phone. Makes me think its summin to do with the harware possibly? Anyone else found a cure for this?

I Had the same problems, so I gave up on USB connection with active sync, I have 4 USB ports on my laptop and tried all, I now use bluetooth and works everytime.
There has always been problems with USB and actgive sync, so 4.2 was suppose to fix, but not for me.

I've got the same probelm on my Tytn. I've solve it to delete the Pocket Mechanic :shock: , I've done a S.R. and from now on the A.S. works correctly.
Ciao, Cesare

Had to use my old vario for a bit today, used activesync and it worked fine for the whole time I had it plugged in, got a new Vario II replacement today, got home and its exactly the same, would appear to be a mismatch between Vario II and activesync 4.2, can I connect by wifi?

Hello hmm the problem is if it uses direct or ip ,try go settings - connections - ( usb to pc ) and disable advance network funtctionality.
Hope that works
thanks

I had this problem too - I disabled advanced network capabilites in the "USB to PC" control panel under the Settings/Connections folder, and then Activsync stayed connected after that.
HTC TyTN 7/22/06 ROM

Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?

After the activesync working fine with my orange spv3100 for 4 weeks it suddenly refused to connect. I un-checked the "advanced functionality" box as suggested and it works again. Many thanks for the solution peeps.
I too would like to know what functions this deactivates.

Same problem, I've installed ActiveSync 4.5beta and now it stay connected, sometimes it disconnects but after restart of the phone it works again, one friend told me that the problem comes from the Activesync in the phone, so may be we have to look for the problem in the phone not in the PC

Activesync 4.2 problem
Hi all,
I too started having the same problems with Activesync 4.2 hanging my phone if left charging overnight. I decided to disable the advance network connection and that worked for a while. Now the phone wont sync AT ALL. It charges, but I can't do anything else. I reinstalled the Activesync 4.2, did a soft reset, off-on to the mobile, turn off-on my computer and still nothing. I will d/l Activesync 4.5 beta to see if that solves the problem, but it looks to be a problem with the Activesync in the mobile and not the one in the computer. I did the troubleshooting and it is detecting the USB connection but does not sync. I would really like to know if wireless sync can be achieved. Will post any fix if I find one. BTW my mobile is about a month and a half.

activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
pls help here im tired of this activesync problem
thank you

Sync problems with tytn
I've read through all the messages in this thread and wondered if someone could help me with some problems i've been having with syncing mine with a laptop. Often when I have the device plugged in when i boot up the laptop activesync won't start until i've disconnected the usb cable then reconnected it again-i never had this problem with the imate jam. My second problem arises when sometimes it says on the files section that there are un resolved items???? i then try to resolve the issue and a wizard comes up with add or remove buttons.afraid that i might remove something essential i tried the add button hoping this might resolve the issue-it didn't. i then gave up as nothing worked. after switching the laptop off and then syncing a day later there were no items to resolve so what exactly is happening. how can there be unresolved items one minute and nothing the next.also i hadn't done anything different on the tytn.if i select the add button on the window does it add a copy of the file highlighted and could this affect the operation of the device.Sorry if this seems a little confusing but i never had this problem with an xda exec or an imate jam.
please could someone help a non technical fifty something.

activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY

I agree, where is this option?
I'm running version 4.2 and along the top bar all I'm seeing is:
File - View - Tools - Help
Nothing like "Settings" and/or "Connections" in sight. Under "File" there is the "Connection Settings" option, but nowhere does it mention "Advanced Networking Functionality".......
Can someone explain this please?!

The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.

pof said:
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
Click to expand...
Click to collapse
Every time I try that, I just get an error message saying: "Failed to disable RNDIS to use Serial".
Has anyone else seen this message? Happens regardless of whether the Vario II is connected by USB or not...
Thanks,
Chris

I'm still getting the RNDIS error, has anyone else come across this? Is there a solution?
Cheers,
Chris

Trinity(HTC3600) vs. Apple Osx

Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync programm and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can slove this problem?
Have you try to use it as a Modem for an apple copmputer?
Thx a lot Guys!

Try this: go to Settings, Connection, USB to PC and uncheck "Enable advanced network functionality". This way the phone should be recognised as a USB modem.
(I don't have a Mac so I haven't tried this myself)

thx i try it but it doesn`t work!
I try on xP and i have the same problem!

BrigateGB said:
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync program and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can solve this problem?
Have you try to use it as a Modem for an apple computer?
Thx a lot Guys!
Click to expand...
Click to collapse
I certainly have been trying... the first thing that I find is that when I connect it to the Apple using the USB cable is that it doesn't recognise it. Has anyone had more success with this? The only problem is that I can't remember what happened when I first connected it - perhaps it asked me to set up a connection and I got it wrong. This is my first return to Macs in ten years, so I was a little overwhelmed by trying to get familiar both with it and with a new phone (Dopod D810).
If I did set up a connection... (!) then I think the connection is called "SerialPort-1", and the network report says that it is configured, but not connected. I don't seem to be able to delete it and start again. Maybe the Mac isn't even recognising the USB connection?...? Any feedback would be much appreciated!

This has been discussed many times - no DUN service with Trinity ...
But no problem going online with your MacBook. Make sure you update to the latest OSX.
Then delete old bluetooth connections to Trinity on your MacBook and reconnect using bluetooth
Then start Internet connection sharing on your Trinity - then click on the bluetooth symbol (top right) on your MacBook and choose the New Option connect to Bluetooth Pan (your owner name)
Hope it helps

Activesync 4.5 doesn't work anymore

Hi. I've had a really good search for info before posting and tried lots of things but I'm stumped!
I've got a Softbank X01HT (HTC Hermes 200). It used to work fine with AS4.2 and 4.5 but stopped working one day and hasn't worked since!
When I connect the phone via USB everything looks normal. I get bing-bong and bong-bing etc, I can see the phone is attached in device manager, the phone charges etc. etc. but AS won't connect to the phone. In AS connection setting it says USB is available etc. I have deselected advanced USB connection and tried "work"/"internet" etc.
I haven't done anything to the phone. No upgrading of ROMS or OS or anything. I even gave my laptop a first birthday!
I have a Dell Precision M60 running Win XP SP2 and a fresh installation.
I have deselected "do not allow exceptions" in Windows Firewall and AS has put exceptions for itself in there.
I am not running through a hub.
I'm hoping someone can help - maybe I missed something in all my searching for a solution.

Had something similar happen to me once. Resolved it by deleting the partnership on the pc from within active sync on pc (make sure phone isn't connected or active sync won't let you delete the partnership). Issue was with the partnership profile on the pc getting corrupted nothing to do with phone at all. Once partnership is deleted connect phone (make sure you have reset your phone settings that you have changed back to default) and set up a new partnership. Good luck and let us know if it works.
Cheers
Barney

Barney
Thanks for replying.
As mentioned, my laptop got a "first birthday" i.e. the HDD was wiped and the OS re-installed. There are therefore no pertnerships or remnants buried deep in the registry etc. to delete. In AS (with or without the phone connected) everything except for "connections settings" is greyed out.
Cheers
Bryce

Do you by any chance have zone alarm running? If you do switch it off and see if it works. If you don't then switch off Windows Firewall and see if works. Post the results.
Cheers
Barney

tatuanui, have a look at
http://pocketpcapps.net/activetweak.aspx
maybe this freeware tool can help you
cheers jost

Whenever mine acts up I simply disconnect my phone, restarting my pc, restart my phone and is well. I dont have the problem often but it solves it for me

Active sync
I had a similar problem. Check out Settings/Connections USB to PC and uncheck "Enable advanced network functionality"
This worked for me.
May not be related but worth a try.

Thehoodedclaw_uk said:
I had a similar problem. Check out Settings/Connections USB to PC and uncheck "Enable advanced network functionality"
This worked for me.
May not be related but worth a try.
Click to expand...
Click to collapse
Thanks but, as metioned, already tried that one.

g35driver said:
Whenever mine acts up I simply disconnect my phone, restarting my pc, restart my phone and is well. I dont have the problem often but it solves it for me
Click to expand...
Click to collapse
Thanks. I wish it was something simple (yet annoying) like that...

Barneyabz said:
Do you by any chance have zone alarm running? If you do switch it off and see if it works. If you don't then switch off Windows Firewall and see if works. Post the results.
Cheers
Barney
Click to expand...
Click to collapse
Barney
Cheers. When at work, Windows firewall is off. When at home it is on but exceptions are allowed and AS has put itself in the exceptions. Switching off the firewall completely is not an option as the admin has switched that function off (greyed out). This is no different to when it was all working so I'm not so sure it's that.
I don't have zone alarm. In fact I have re-installed very little since having reinstalled Windoze.
Keep the suggestions coming though!

tatuanui said:
Barney
Keep the suggestions coming though!
Click to expand...
Click to collapse
Had a similar problem.
Open task manager. Is RAPImgr.exe taking up all the processor time on a CPU (so will take 50% on a dual core machine, 100% on single core).
I had this issue with AS 4.5 when upgrading from the old machine (Wizard) to the new Hermes and basically had to reboot between connection attempts to get RAPIMgr to die. When I killed it manually, the computer rebooted anyway.
The problem with this seemed to be disconnecting it mid-sync and then connecting a new phone which then broke it. The way I solved it was to stop connecting the Wizard.....
Perhaps try removing the relationships on AS on the phone. I guess it might work....

Hi last suggestion I have - I know you mentioned your pc was wiped so there are no partnerships, however the first time you tried to connect your phone since then something might have gone wrong and a partnership might have started to be created but not yet completed. With your phone disconnected can you open active sync, click on "file" then on "delete mobile device" (if it allows you to - it might be greyed out) - See if that works and get back to us.
Cheers
Barney

ActiveSync/PCtoUSB Problems

Hey guys,
i've got a very big problem.
I dont know why but every time i connect my Blackstone to the Computer it always open the "Internet Sharing" thing. Ive changed it over "Settings" back to Sync (and in settings/connections/USB to PC, check "Ask me first about USB connection type when I connect the device to the PC" also), but no change.
Then i canged in the registry the following key "HKLM\Software\HTC\USBToPCPopUP\" DWORD: OnlyTwoChoice=1
now the HTC Popup with the option "Sync" and "HDD" show up, but when i choose Sync it doesent connect and sync.
I want my three Options back and want the option that i can choose out of "Sync" "HDD" and "Internet Sharing"
Thank you
greetz

I started getting this problem when I used the Internet Sharing option for the first time. From then on it would automatically try IS instead of Activesysnc, no matter what I did.
I solved it by unticking the Enable faster data syncronization box in USB to PC tab, but this results in a clunky pile of tabs that come up when connecting to the PC.

Unticking the "Enable faster data syncronization" box in USB to PC tab, doesent solve the problem

Hello
I got the same problem where I did not get the "3 choices" screen while connecting to usb, and IS by default...
I just deleted all keys in the registry under //HKLM\Software\HTC\USBToPCPopUP\
and it went back to normal....
Hope it will the same for you..

I have the same problem since a while, but haven't found a solution yet... starting to get a little desperate...
dapezzz said:
Hello
I just deleted all keys in the registry under //HKLM\Software\HTC\USBToPCPopUP\
Click to expand...
Click to collapse
I guess you mean the registry on the device itself?
I been looking for that, but it looks i don't have this //HKLM\Software\HTC\USBToPCPopUP\...

in fact, i'm facing the exact same problem as described in this htcforum.com post:
"http://www.htcforums.com/post5958.html#p5958" (yes, i posted there too )
i'm pretty sure the problem is NOT pc-related, the data-connection fails at every possible system i tested it with (ranging from xp to vista to ubuntu to osX), at least the usb-diskmode worked before on all these systems before... not anymore...
the answer of HTC support wasn't of much help either:
Dear valued HTC customer, Thank you for contacting our Customer Support Center. We are dedicated to providing you with the best quality service and answering all of your questions and concerns. You recently wrote us about an issue that you have encountered with your device. To clarify your issue, you stated that you were unable to connect your device to the PC. . For this you will need a full version of Microsoft Outlook 2003 or newer and Microsoft Activesync for Windows XP or Windows Mobile Device Centre for Vista. Once these are installed simply connect your device to your PC and it will transfer your details to your PC. I hope this is of help to you. If you need any further help we recommend calling for a direct guidance on these steps for synchronising. If the above steps do not resolve your issue, we invite you to visit the support area on our Web site.
Click to expand...
Click to collapse
i suspect them of not even reading about my problem, and just firing some default answer back... not really helpfull.
so i keep looking around for possible solutions for now.
I'm seriously thinking to make use of the warranty, but hate to lose the device for a long periode... anybody has experience with that?

another PCtoUSB problem, i get all 3 options, HDD and Internet Work perfectly, ActiveSync however doesn't. Vista recognizes it as a USB Pocket PC, but Vista Sync Center and WMDC do not, nothing. On HTC i get the charging icon, but not the Sync icon. Also in the ActiveSync --> Connections menu i have "Sync all PCs using this connection:" ticked, however the drop down menu is empty, nothing to select.
in the ActiveSync start screen there's just the fake Microsoft Exchange account, nothing else
Everything was working fine till few days ago :/

dapezzz said:
Hello
I got the same problem where I did not get the "3 choices" screen while connecting to usb, and IS by default...
I just deleted all keys in the registry under //HKLM\Software\HTC\USBToPCPopUP\
and it went back to normal....
Hope it will the same for you..
Click to expand...
Click to collapse
I tried this but still get ICS opening when I connect my device up. It is driving me mad now trying to sort this - I may even resort to a hard reset before the end of the weekend.
The only way I can get sync to work is to disable the faster data sync option.

hmm, every system i test with gives the same result:
the htc device does charge, but the usb data-connection never works...
could it be a faulty connector?

http://forum.xda-developers.com/showthread.php?p=3764541#post3764541
I have the same problem and the above method solves the problem
Hope it helps.