Have my shiny new HTC HD2 in my hand as of yesterday - stunning device so far but I am unsure what I should expect from the bluetooth link behavior with ActiveSync/Mobile Device Manager.
I'm running Win7 Ultimate 64bit on a laptop with BT built in on latest drivers etc.
My old Nokia handset would connect with the laptop quickly when in range - I then had to choose to sync the calendar, notes etc from the Nokia sync software.
The HD2 will let me connect to ActiveSync without problem, but each time I have to do this manually. If I walk out of range or shutdown the laptop etc, the bluetooth link is not re-established until I choose ActiveSync on the HD2 and choose connect to laptop.
Is this expected behavior? I had hoped the HD2 would connect automatically to the laptop when in range?
It seems to link fine with my in car bluetooth, though if the HD2 is locked when the car bluetooth turns on (e.g. when starting the car), I need to unlock the HD2 before it will automatically connect?
Can't find any settings that appear directly relevant - where I can it is all set to allow connections, start automatically etc.
Advice welcome!
Related
Hey all,
I have some generic BT dongle for my computer that I bought a year or so ago to use with my old HTC Typhoon. The dongle allowed my phone at the time to ActiveSync over BT using the BluSoleil software that came with the dongle. However, with the HTC Wizard (MDA vario body with the AKU 3.3), I cannot for the life of me sync over BT. I have no idea what I need to set up and every time I try and do a new "partnership" in the phone for syncing over BT - i select my computer in the devices, yet nothing happens. I cannot establish any COM port communication with the computer and the only type of services that i can push are the vCard from the computer and a "personal area network"...
HOWEVER, if I take my Wizard and connect it to my Thinkpad T60 laptop that has native BT; I can sync to my hearts content... so... someone please give me a clue as to wtf I am supposed to do here to get this to work over BT
Thanks!!!
Anyone? Plweeze?
C'mon, someone must have an idea!
Gave up
I had the same dongle, or at least mine also came with Blue Soleil. I hated that software - it runs a dozen different programs that clog the computer and still doesn't connect properly. I took it off and tried the native MS XP software. It would work once, but when I put the PC to sleep I would have to reboot to get it to connect again. I finally realized that it was much easier to use a cable and gave up. I'll try again when I get a PC with built-in bluetooth.
prestonmcafee said:
I had the same dongle, or at least mine also came with Blue Soleil. I hated that software - it runs a dozen different programs that clog the computer and still doesn't connect properly. I took it off and tried the native MS XP software. It would work once, but when I put the PC to sleep I would have to reboot to get it to connect again. I finally realized that it was much easier to use a cable and gave up. I'll try again when I get a PC with built-in bluetooth.
Click to expand...
Click to collapse
Where did you get the native XP software? I could never find the native software
Plug and Play
If you don't install software, XP will operate it.
I've managed through pain and misery to get Activesync to work through bluetooth (not easy with widcomm stacks as drivers).
When my PC boots up, Activesync (PC) will complain that the bluetooth COM port isn't connected (obviously because my phone isn't connected through bluetooth 24/7)
So everytime I reboot my PC, I have to re-check the COM port connection in the connection options (PC) to make Activesync listen to my bluetooth COM.
Any suggestions?
Also, I know that when my phone is connected via USB, my phone will gain access to the internet (My PC has the internet connection and shares it to the phone). With bluetooth I havent been able to get this to work. Yet both USB & bluetooth work through Activesync. Is there something Im missing?
Thnx! I hope this isn't too specific/complicated like question
I used to have some of the same problems. What I found that usually it was 2 things causing it.
1. Activesync - Installation or Configuration
2. BT Software - Installation, Configuration or Need BT Software upgrade
What fixed my issue was 2 fold: activesync settings & needed to upgrade my dongle's software.
Activesync: When I installed 4.5 it setup a network connection that kept running in. And when I started up my PC I could see the icon running in my sys-tray (and would have troubles on and off again either with bluetooth / USB sync. What I found that worked for activesync was uninstall and make sure you check off allow wireless activesync connection. I've also found it likes to use com 3 for BT activesync.
BT Dongle: I have Motorola PC850 dongle and found that there was a great new BT Stack update that would hold the settings even if I turned my PC off for weeks at a time or removed the dongle to somewhere else. Plus it fixed the issue I had with using my BT stereo headset, to listen to music with out pops and skips. Oh In your BT settings make sure that com 3 or what ever your using is the same as activesync
Hope I can test those few tweaks.
However, after connecting my phone to activesync by USB, now my phone won't even connect by bluetooth to my PC anymore.
STUPID STUPID bluetooth stacks
Hi there,
I always synced my phone bluetooth with my laptop (Windows 7 x64)
My laptop is bluetooth visible and devices are allowed to connect.
my phone sees my laptop, and me laptop sees my phone
when i bluetooth connect them it seems to go ok, but in the Windows device manager from my laptop it says cannot find drivers.
Strange because i downloaded the latest windows mobile center
I have an unknown bluetooth periphal device in the device manager
USB connection does work properly and the sync! i also can reach my 8Gb SD in my computer
Cheers!
I removed the initial question about the bluetooth connection with my carkit.
The initial question is a problem of my car, don't ask why but i tested bluetooth integrated carkit with a other phone and it also does not work properly so something in the wiring of my car is stuck and is not for this forum. First it DID work with the other phone
I cannot find how to change the thread type to "Bluetooth connection with WIndows 7"
nobody has problems with windows 7 drivers?
Hi,
do you know why my HD2 can sync only when plugged with usb cable and not with bluetooth? It has been correctly paired with my Win7 ultimate, but there is an ! on it in the device manger saying that no blueottoth device drivers has been loaded!
thank a lot in advance
M
I also get the device not recognised problem, but that's only for one part of the bluetooth stack - can't remember quite what it's for. Regardless, I am able to pair and use active sync with my 2 Windows 7 machines OK. I do have to use the active sync application on the phone to do it though - I can't just pair the devices then run active sync.
In the device center you have the possibility to setup your connection settings. Go to settings - connection settings - leave USB ticked - in the next connection possibility change bluetooth into com5 or com6 and you're ready to go.
I have kinda the same problem with Win XP and my HD2.
- I successfully paired the PC (Dell D820) and the Leo.
- I can successfully exchange files from the PC to the HD2 via bluetooth - but not the other way round (Leo says the PC does not support this ).
- I can successfully sync the Leo to the PC via USB cable.
- When I try to sync via bluetooth, HD2 says that the PC "does not offer any service that can be used with ActiveSync".
- Leo has incoming Bluetooth port set at COM1.
- XP has Bluetooth ports set at COM1 (incoming) and COM3 (outgoing).
Anyone out there has a clue?
Thanks.
I had to set com7 to make it work
I simply leave WMDC set to use "Bluetooth" and it works fine. Check that, then on the phone select the pc, in the BT manager, menu-> update, it should rediscover activesync and list activesync.
Hi,
I am facing the very same problem, please help...
Same problem here with Windows XP. Pairing is ok, discovering Activesync service fail. I never had this with my previous PDA.
kilrah said:
I simply leave WMDC set to use "Bluetooth" and it works fine.
Click to expand...
Click to collapse
WMDC?? On WinXP? Was that a typo or am I missing something?
vince2773 said:
am I missing something?
Click to expand...
Click to collapse
Probably that the original discussion was about Win7, so I assumed the rest was about it too
I didn't see your particular case was under XP, sorry.
But still, same went for XP, except replacing "WMDC" by "Activesync", and select the outgoing COM port your PC has assigned to the HD2 instead of "Bluetooth". NOT the one your HD2 shows as incoming.
Thanks for the clarification Kilrah (I didn't mean to be rude, I was just in a hurry).
Anyway, I tried as you said (which I had already done, but tried again just in case). No success with Bluetooth sync.
Guess I'll stick to the USB cable and wait till June when my new laptop comes in with Win7 and try again.
Too bad though. Bluetooth sync worked like a charm with my old Nokia. So far, this is the only major disappointment in 2 months with my HD2. Maybe it's because ActiveSync itself is a crappy app?
Hello,
I originally posted this over on the WP8 forums, but I still haven't been able to figure this out. Maybe someone here has the solution.
I've got a Lumia 1020 and I'm trying to connect via Bluetooth to a windows 8.1 device. I'm able to pair the devices, but as soon as that process is complete, the connection drops. On my phone, I can tap on the name of my computer, and it will reconnect, but it lasts for literally 3 seconds, before dropping the connection again. I've tried connecting to both my Surface RT and my windows 8.1 ultrabook with the same result. The phone will connect to my car stereo just fine, and I never have to do anything with it. Is there some sort of protocol that's missing in Windows 8 to allow phones to connect via Bluetooth? My main use for this would be music streaming, and using my tablet as a hands free device.
My eventual plan is to mount my Dell Venue 8 Pro in my car as a carpc, so I would like to figure this out somehow. I've tried disabling the Microsoft Bluetooth enumerator, and strictly use the Intel Bluetooth 4.0 adapter, but still, the same thing happens. I can't even stream music from my phone.
Any help on this would be greatly appreciated.
Thank you,
Dustin
I should also mention that I've tried connecting an android phone with the same outcome
The connection drops because nobody uses it. As soon as some app open a socket between the phone and tablet, the connection will pop up again. This is the default behavior of bluetooth. The devices are first paired, and connection is opened only after something needs it.