hi
i cant seem to connect my external GPS receiver via bluetooth. it finds the device and sets it up but wont connect. when i used the stock ROM i had no issues but i have cooked up to Duttys latest Rom.
any ideas?
thanks (yes i have searched)
Related
Hi All,
Before running the upgraded ROM, to enable ActiveSync via Bluetooth, I had to download and install a Bluetooth file from a site I can't remember now. After the upgrade I can't use ActiveSync via Bluetooth and am not sure whether I need to reinstall the same Bluetooth stuff as before as I thought the ROM had Bluetooth fixes in it for ActiveSync etc.
Has anybody else been able to connect via Bluetooth after the upgrade with no other files being installed ?
Thanks,
Rob.
yes i use activesync via bluetooth at work and home using the new rom and installing no other software.
It was a pain getting it to work, and what i did in the end was delete all parterships in activesync and start again from stratch, that worked for me.
This is what i did:
I couldnt get my XDA2 to access the net via BT active synch until i went into start / settings / system / bluetooth settings / bluetooth active synch setup.
It then asks you to bond the XDA2 with your pc ( if its already bonded, delete it ) once done, you then click yes to let the XDA2 use the pc's serial port, do the same on the pc, and connect via BT as normal.
Works great !
Hi @all,
I just upgraded to WM6. Now I have 2 Problems:
1. I can't connet to WIFI Hotspot
2. After Softreset and entering the PIN it says "No service" (but not all the time)
3. I am using Voice Command 1.6 but I dont hear the announcements through my Headset
Can anyone help?
Greetings
Peter
1. Depends on hotspot encryption (you can do this trick: turn on wifi trough wlan manager start-settings-connections-wireless lan, it will turn on and turn off by itself, then turn on wireless trough comm manager, it will start but it will not connect to any network, so turn it off from comm manager and turn it on again and if the encryption is supported it will connect)
2. This never happened to me, try to clean your sim card contacts
3. I had this problem with WM5 also but i not remember the solution, try to search the forums for one
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
linuxpete said:
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
Click to expand...
Click to collapse
did you upgrade the radio firmware? I had some issue's with the radio after wm6, I upgraded to 1.15 and all the problems where fixed...
Hi Datake,
It's the original ROM from Helmi. Where do I find the Radio-Update? How do I install it?
Thanks
Peter
NO services gsm, after soft reset
I don´t have apply rom radio update in my qtek 9090 (blue angel)...
My radio rom version is 1.06...
If I apply a soft reset, I lost my signal gsm...
After 2 tries (2 soft reset), the signal come back...
I have a problem when I try apply rom radio upgrade to 1.15.
(connection failed, after activesync is closed in my pc).
(PS: using upgrade_noID)
How can I proceed in this case ?
Help me guys... please...
Rodrigo
Qtek 9090 (blue angel) - WM6 R0 - radio rom 1.06
MS Activesync 4.5
Brazil.
i found out some bluetooth problem after i flash my rom , i can recieved file from others device by bluetooth but can't send out file or picture by bluetooth,when go to bluetooth connection even others device is on but it still show disconnected,whne try to beam the file it will stay on seaching only no device will show.hop there is anyone to help me on this problem thanks!
Had the same problem once after flashing a rom, did a hard reset, flashed radio versions, but no result. Then i found a good BT utility here, called PersianBlue, it solved my problem, and it has more options then normal Windows BT utility.
You could give it a try:
Hi
How to configure wm6.5 to work with skypephone s2?
Is there any bluetooth manager, with can make this working?
On stock wm6.5 bluetooth manager, after configuration (via dialup modem) i got error (cannot connect for unknow reason). Devices are paired.
skypephone has option for bluetooth modem.
Many thanks
Hi there XDA ppl
I have a HTC P3600 Trinity, the problems that i have with it is that the bluetooth wont work properly. When i start it and try to connect to a pc, it finds the pc but it fails to connect to it, the same for other phones. I managed to send one file to a Nokia E71, but was not able to be found by that phone when it searched for me.
I configured the bluetooth to be visible, and i made sure that receive all incoming beams was selected.
I have Radio Version 1.56.70.11
ROM Version: WM 6.5 SSD Blue(8) 24001 by The.Decoy
I changed the radio ROM with 1.50 and it still didn`t work. Changed the ROM a couple of times... Same result.
Any chance someone could help me?