Hi,
Like most (all?!) I'm looking for the holy grail - more time away from the charger for my HD2!
As per my previous HTC Diamond I'm thinking a good way to help me on my way is to switch to 2G most of the time and then to 3G (well, AUTO to be precise) when I'm actually doing something that requires the connection (surfing / steaming / pulling down a few Mbs of email attachments etc). While some might say this shouldn't be necessary, tbh it worked for me previously.
I used to do this via a slider on the CommManager thingy. However there isn't one on the default HD2. Is there an easy way to make use of that extra space at the bottom of the interface?! Any other suggestions to easily achieve this?
Thanks in advance..
Comm manager does the job
jrvenge said:
Comm manager does the job
Click to expand...
Click to collapse
Hi - thanks for the super quick reply!
Could you possible explain exactly how I get the built-in Comm Manager to display this missing slider? I've looked around and can't seem to find it!
(thanks again)
WMLongLife.
http://forum.xda-developers.com/showthread.php?t=478519
There's also a cab floating around that will insert that option in the Comm Manager.
I will attach it here - I hope the author doesn't mind.
Pagnell said:
WMLongLife.
http://forum.xda-developers.com/showthread.php?t=478519
Click to expand...
Click to collapse
Thanks for the above. I had a look at this before (and again just now) - looks good, but doesn't quite work 100% on the HD2 yet.
- using flight mode breaks it (seems to disable it even when you've come out of flight mode, never to work again unless reboot);
- the disconnect idle connections bit breaks push mail, so I have to turn this feature off when using push and then back on again when not using push - would be much better if it could auto-detect on the fly;
- a few other random bugs
All in all a great effort (HD2 version hasn't even made beta yet - still dev build!) so no complaints, instead I await a more HD2-finished version with interest.
pedmond said:
There's also a cab floating around that will insert that option in the Comm Manager.
I will attach it here - I hope the author doesn't mind.
Click to expand...
Click to collapse
Ah just what I wanted - ALMOST!
Being picky.. this replaces the Push Email slider with the 2G/3G one.. now I use this Push Email slider quite a bit, so ideally (for me at least!) I'd want it to replace the bottom one (the WiFiRouter option - hardly ever use this). OR, better still, to add an additional option onto the bottom in the wasted spaces.
Can this be modified?
(thanks again)
SimonW500 said:
Can this be modified?
Click to expand...
Click to collapse
Yes we em... it can
But you have to edit the Registy via Total Commander or another RegEdit Tool.
The requried regkeys can be found at:
HKLM\Software\HTC\CommManager\
There a several SubFolders numbered from 0 to x.
Those SubFolders are the buttons in the CommManager.
Each Folder contains at least a <default> key which contains the command to run.
You can reorder the Position of a button by renumbering the folders.
If you want to add a button (e.g. you have 6 Buttons but want 7, you'll find 6 folders numberd from 0 to 5), add a folder named 6. Step into this folder and add key named Default (type is string). Aferwards add a value to this key (e.g. MobileWifiRouter or 3G). Afterwards you have to change the <SupportedFunctions> Key in the root folder of the CommManger from 6 to 7.
To get back to your "main problem"...
To re-enable the Pushmail Service Button you have to add the following key/value pairs to a numberd folder.
Default = AUTD
Execute = \Windows\repllog.exe
ExecuteCommand = //remote
Aftwards restart the CommManager (or better the device) and you should find the Pushmail Button again.
Greetings
LordK
LordK said:
Yes we em... it can
But you have to edit the Registy via Total Commander or another RegEdit Tool.
The requried regkeys can be found at:
HKLM\Software\HTC\CommManager\
There a several SubFolders numbered from 0 to x.
Those SubFolders are the buttons in the CommManager.
Each Folder contains at least a <default> key which contains the command to run.
You can reorder the Position of a button by renumbering the folders.
If you want to add a button (e.g. you have 6 Buttons but want 7, you'll find 6 folders numberd from 0 to 5), add a folder named 6. Step into this folder and add key named Default (type is string). Aferwards add a value to this key (e.g. MobileWifiRouter or 3G). Afterwards you have to change the <SupportedFunctions> Key in the root folder of the CommManger from 6 to 7.
To get back to your "main problem"...
To re-enable the Pushmail Service Button you have to add the following key/value pairs to a numberd folder.
Default = AUTD
Execute = \Windows\repllog.exe
ExecuteCommand = //remote
Aftwards restart the CommManager (or better the device) and you should find the Pushmail Button again.
Greetings
LordK
Click to expand...
Click to collapse
Excellently detailed post! Much appreciated - will give it a whirl this evening
i installed the mobilewifirouter separatly through the bowmanpackpro.zip
however for key 6 in the registry, whats the execute command for MobileWifiRouter ??? can someone copy and paste this
also it wont let me add new folders there, it says already exists??
Hello
The easiest way in my opinion is to go into the windows folder. Copy the file cmbandswitch and paste it as a shortcut in the programs DIR. You can then assign it to a quick link on your home page. Works a treat for me. Just select it and the menu to change from 3g to 2g or to auto pops up.
Related
I'm looking for a small .exe file that can switch to Today screen without closing applications (like 'Today' option in SBP Pocket +)
Why, you'll ask me ?
Because I'd like to switch to today screen with my voice using Microsoft "Voice Command"
I'm already able to :
- Power off
- suspend
- soft reset
- Rotate screen
my Magician with some little applications command by voice but I can't find an exe file to switch to today screen...
Thanks in advance
I find what I was looking for
I post it there if it interests somebody...
I use PHM Keys for Pocket PC a freeware developed by Philippe Majerus
I extract PHMKeys.exe (34 Ko) and put it in \Program Files\Today (but you can put it wherever you want)
After this I create a shortcut in \Windows\Starting Menu\Programs to PHMKeys.exe with this Target :
Code:
"\Program Files\Today\PHMKeys.exe" Today?"\Program Files\Today\PHMKeys.exe",-117
I name it Today.lnk
That way when I pronounce "Launch Today" the today screen appears
Very interesting because I also use VC. And I do want to use it for more, than the built-in abilities.
1. How to create a shortcut and what do its elements mean?
2. How to switch between full volume/no volume + vibra? Built in command only changes telephone volume.
3. How do your other named shortcuts look like? (Power off and so on)
I think u can just say "start today" on voice command without any extra addon. I just tried it and it worked.
RE
Hi DocteurN
Can share how to use VC to
- Power off
- suspend
- soft reset
- Rotate screen
and what programs are required?
Thanks
I would realy REALY like to add skype ability to VC.
Much like as the call command works, but instead of a regular, using SkypeOut.
Like saying:
say: Skype <conctact name>
VC response: home or mobile
say: Mobile
I know it's like: offering a finger and trying to take the whole arm, but this would be realy convenient.
Anyone an idea if this could be accomplished?
Chatty > to create shortcut I use Resco Explorer : I Tap and Hold on PHMKeys.exe then Copy. Second Tap and Hold then Paste Shortcut.
A file named PHMKeys.lnk is created.
Rename it Today.lnk for example
Make a tap and hold on this file then Properties > Shortcut
That where you copy :
Code:
"\Program Files\Today\PHMKeys.exe" Today?"\Program Files\Today\PHMKeys.exe",-117
Copy the link in \Windows\Starting Menu\Programs and that's all
ioneng > Yes you're right !
but I'm using the french version of VC and I made a wrong translation of what I said
FOSA > I'm using little exe files (freewares) I've found on the net and that extracted from packages
Here they are :
Heimiko > Sorry for Skype I've got no idea...
Seeking deeply in 'PHM Keys' I find that you can use PHMKey.exe for a lot of interesting things just by creating shortcuts
Here are what you can do (text is from PHM site) :
Today - Returns to Today screen
My Documents - Opens My Documents folder
Close - Closes active program
Task Switch - Toggles between running programs
Next Window - Cycle through open programs forward
Prev. Window - Cycle through open programs backward
Undo - Cancels previous action
Redo - Cancels previous undo action
Cut - Cuts the selected item
Copy - Copies the selected item
Paste - Pastes the selected item
Page Up - Move one page up / to previous page
Page Down - Move one page down / to next page
Volume +/- Changes Volume
Lock - Shows the system password screen
Suspend - Turns off your Pocket PC
Rotate - Next display orientation clockwise
Rotate Left - Toggle display between 0° and 270°
Rotate Right - Toggle display between 0° and 90°
Rotate Reverse - Toggle display between 0° and 180°
I make a zip of all this shortcuts.
You just have to copy PHMKeys.exe in \Windows and the lnk files in \Windows\Starting Menu\Programs (you'd better create a folder before copy)
You can rename lnk files the way you want and it would work with VC
Now I'm looking for an exe file that can mute/unmute the volume.
You launch it one time => mute
A second time => unmute
I only find this utility : AutoMute (11 Ko)
But it intended to turn the volume down for a specific interval of time...
Anybody knows an application that does that ?
RE
Hi DocteurN,
Thanks for the files.
Just one question though. When you use VC to activate the files (like reset, poweroff, screensave etc) is there a pop up message box which says "Are you sure you want to xxxxx...Yes..No" upon which you manually tap either YES or NO action or that it'll execute the program stratightway without any pop up message box?
BTW, where to install all the mentioned files?
Thanks again
No, there is no popup, the program is execute straightway
Where to install the files ?
There :
You just have to copy PHMKeys.exe in \Windows and the lnk files in \Windows\Starting Menu\Programs (you'd better create a folder before copy)
You can rename lnk files the way you want and it would work with VC
Click to expand...
Click to collapse
Anybody has an idea how to make VC read the e-mail to me?
That is what I am really missing on the road
thanks in advance.
RE
Hi!
I think your Reset has a problem.
When I click on it it pops up a message "Are you sure you want to rest your Pocket PC? Any unsaved data will be lost."
When I click on it it pops up a message "Are you sure you want to rest your Pocket PC? Any unsaved data will be lost."
Click to expand...
Click to collapse
No, Why ?
That what does a soft reset... If you haven't saved your data (a Word document for exemple you'll lost it)
If you're afraid it does a hard reset, that not the case
RE
Hi DocteurN,
There's another soft reset freeware utility which soft resets immediately WITHOUT a pop-up message. I managed to find on the net which does the job nicely.
RE
Hi noviur,
VC cannot read email to you.
What you need is a TTS (text-to-speech) 3rd party program. I think one of the Toshiba's PPC has a simple TTS engine built-in
Thank you, Fosa
I know that it can not... but thought may be somebody tweak it
I was looking for any TTS application for PPC... Found something called Fonix Voice Central - they described it as app, which is doing it - i tried - no way
any suggestions would be appreciated
There's another soft reset freeware utility which soft resets immediately WITHOUT a pop-up message
Click to expand...
Click to collapse
FOSA > That interests me
Could you upload it here ?
Thanks by advance !
RE
Hi DocteurN,,
See attached
Let's start a thread of all the reg tweaks ppl have come up with. If they are saved as .reg files (to an SD), we can install them with a mere double-click by using TRE (options>associate), and anyone can contribute to this post WITHOUT having to build .cab files! Why is this kewl; cos when u hard reset it's a real ball-ache to go back into all the forums to find the tweaks u applied and to navigate thro TRE to re-apply them all. This applies particuarly to settings (Owner info etc). Over and above, we are no longer beholden to tweak shareware, but have full and instant control over our settings.
Each tweak should have 2 reg files; Apply the tweak, and remove the tweak (if possible). In this manner, we can have a directory of reg files, and can turn on and off tweaks with a simple d.click.
Attached is a basic set I've compiled. Please let everyone know if any are a problem (ie perhaps whole key gets replaced and overrides something u have already changed). Files described below:
[*]Reg Date_In_Titlebar ON.reg
Adds the date to the title bar, with format according to your short-date format under settiings>regional (or found manually changed in another Tweak I'll cover later). I do NOT have a .reg file that will undo (ie delete) this new key, but it's easy to see what key is being added so u can delete it. <Credit: Well known PPC tweak - I probably learnt from toenailed>
Can someone please find out where we can change the font for this - it's a horrible bold font that doesn't fit in the space available?
[*]Reg Font_Menu_+_Pop_700 ON.reg
Change menus and popups to a smaller font. Nice size, makes VGA look more VGA-like, yet not so small that it fails cleartype nor looks daft. Requires a reset. <Credit: Well known PPC tweak - I probably learnt from toenailed>
[*]Reg Font_Menu_+_Pop_900 DEFAULT.reg
Reset above change to default of 900
[*]Reg Font_System_700 ON.reg
Changes system font to 2 pts smaller. I find that dialog boxes with radio buttons got a bit wierd, and you don;t get much more screen estate height cos of icon sizes staying the same in file lists, so I don't bother with this tweak. Requires a reset. <Credit: Well known PPC tweak - I probably learnt from toenailed>
[*]Reg Font_System_900 DEFAULT.reg
Turn above off
[*]Reg GPRS_+_3G_Always _On DEFAULT.reg
Awesome tweak to make sure ur phone connects to GPRS/3G and stays there. However, you'll want to switch this off overnight etc, which is the main reason I created this post and these reg files. NOTE: you will absolutely HAVE to replace the "MTN SA Web" bit with the name of your connection which you will find in this key using TRE
<Credit: BrettS http://forum.xda-developers.com/viewtopic.php?t=30277>
[*]Reg GPRS_+_3G_Always _On ON.reg
Turn off the above. Remember to change connection name in file
[*]Reg PIE_Homepage_Default.reg
When u press the E (explorer) keyboard key u go to clubimate homepage - annoying. This resets that hard button to whatever u want (current reg file is windows\default.htm)
<Credit: I forget, someone on clubimate forums>
[*]Reg TerminalServices_Cache_Larger DEFAULT.reg
AWESOME improvement in Terminal Services client horrible black blocks. Increases cache sizez - I did not notice an increase in traffic/cost
<Credit: Carnivor from MS KB http://forum.xda-developers.com/viewtopic.php?t=29996>
[*]Reg TerminalServices_Cache_Larger ON.reg
Turns above off
More coming as I go thro the wiki and toenailed tweak posts and extract usefull ones for us lonely Universal users...
can you add the actual keys to here?
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
cos of this thread
http://forum.xda-developers.com/viewtopic.php?t=30396
Doh! That post came up after I started this thread.
Still this thread is useful for the actual .reg files to same n00bies some time (and to save me time too). I'll make sure everything here is duplicated there tho.
Here are a few more .reg files:
Several versions of date_in_title_bar (covered above)
Hide_Screen_Rotation icon
Hide that icon that allows u to rotate screen - but JJ does it automatically so Icon is not so necessary
Regional_settings
These are for me - u should edit file in text editor to customise 4 yourself. Best part is my short date format that keeps date in title bar small and visible
Ringtone_settings
Customise as above
Screen_Speed_Glyph_Cache
Double your screen cache. COsts a LITTLE memory, and improves screen size
Screen_font_'smaller'
Set screen font size to "smaller". This can be changed in "settings"m and I only include it here in line with my suggestion that we have a collection of files to run quickly on reset. You may want to customise as above
SIP_Settings. Ditto
All in updated zip file.
I would really appreciate if anyone can find a way to get rid of the Last Call in the dialer screen... I know its somewhere hidden in Registry, but I dont seems to be finding a way to get tru it...
Having the Last Dialed No. showing rite up on the Dialer Screen is really bothering and if you happened to press the phone button by mistake twice there we go the last dialed no. has been dialed already for you....
Bump: no-one contributing to this learning?
haven't found anything else worth posting yet m8, u got the best ones already :wink:
craigiecraigie4: Thanks for these - great idea!
I have a suggestion:
HKCU/ControlPanel/Backlight sets the backlight duration for the keyboard (in seconds). It's available through the control panel, but I like it set to more than the CP maximum of 10 seconds. Sorry - I don't know how to create a reg file.
To reset, choose another value in the backlight control panel applet.
Don't have any others to add though
Found another one:
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKLM\System\GWE
Change cxVScr to (say) 10 to make vertical scrollbar narrower. Default value is 14
Change cyHScr to (say) 10 to make horizontal scrollbar narrower. Default value is 14
This change affects various scroll options in the system including the up/down arrows in selection boxes. 10 is a nice size.
This one is in this forum:
from davidberrysmith
--------------------------------------------------------------------------------
Any body remember these reg tweaks from himalaya? they still work
*** Speed Up Your Windows Mobile Pocket PC.
1. Open your registry editor o_n your Pocket PC
2. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE\
3. Change the value of 'limit' from 8192 to 32768
4. Close registry editor and soft reset.
*** disable start menu animation
Browse to HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu\
Change the "AniType" value from 6 to 0.
_________________
i-mate jasjar
Click to expand...
Click to collapse
SiliconS said:
Found another one:
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKLM\System\GWE
Change cxVScr to (say) 10 to make vertical scrollbar narrower. Default value is 14
Change cyHScr to (say) 10 to make horizontal scrollbar narrower. Default value is 14
This change affects various scroll options in the system including the up/down arrows in selection boxes. 10 is a nice size.
Click to expand...
Click to collapse
Nice one dude. I can't make the .reg file cos I can only create reg files of the entire key, and there are too many other things under GWE that users may have changed.
Internet Explorer
Somewhere in those forums I found the IE reg hack to make mine 5.5, this helps connecting to my bank account and viewing other secured sites.
read this somewhere
To change the ability to receive files via Bluetooth (OBEX)
The setting is at 'HKEY_LOCAL_MACHINE\Software\Microsoft\Obex'
The 'IsEnabled' DWORD value should be set to '1' to enable OBEX and '0' to disable OBEX.
For example, to enable the ability to receive fles via Bluetooth
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
says receive so i dont know about send, try it!! might be it
But apparently now this is the same feature as the receive incoming beams setting in connections.
Yes, I know that's not free but 90% of all this hacks have been included in Tweaks2K2. And the other 10% are about to be included :twisted:
Yeah, true. Idea of this thread was to have a facility whereby a hard reset can be quickly restored to a working device - install a few basic apps, run the .reg files, and there u go. Takes me about half an hour from HR thro to up and running perfectly.
craigiecraigie4 said:
Yeah, true. Idea of this thread was to have a facility whereby a hard reset can be quickly restored to a working device - install a few basic apps, run the .reg files, and there u go. Takes me about half an hour from HR thro to up and running perfectly.
Click to expand...
Click to collapse
With your .reg files as inspiration I'm just about getting there in the same way. I've written down all the steps and I just run through them. I've done this since I had my XDA2 and it makes a hard reset so much less traumatic:
Code:
Hard reset. Wait for Today screen then soft reset.
Connect cable to ActiveSync. Set up guest connection.
Turn off beams, error reporting
Set basic clock accuracy
Copy Step 1 files to root of PPC [These are the CABs for the programs I install]
Run CABs. Leave O2 Connections CAB. Put gps.CAB and PIMAddin onto storage card
Run TRE registry editor. Associate .reg files to TRE
Open the .reg file [This applies my registry settings. See below]
Run O2 connections CAB
Copy all Step 2 files to root of PPC [This adds shortcuts to StorageCard-installed programs to my Start Menu and gives me my freeware email client and PZP icons and profiles]
Run SDK Certs CAB
Run OzVGA. Change all fonts to same size as qVGA
PPC: edit registry: browse to HKLM\ControlPanel\GPS Settings. Delete the DWORD marked "hide"
CPL > Personal > Buttons: match Button 2 to [Task switcher], Button 4 to <Rotate Screen>; Set button lock
CPL > Personal > Menus: ActiveSync, File Explorer, Internet Explorer, nPOPw, Pocket Informant, Task Manager, TomTom Navigator
CPL > Personal > Owner: set owner information
CPL > Personal > Phone: change band to GSM
CPL > Personal > Today: set items to Date, PZP, PocketPlus, PocketBreeze, Messaging; set theme to Windows Default
CPL > System > Clock: Show time on all screens
CPL > System > Regional: Set locale to UK
CPL > Connections > GPS: set program port COM0
Soft reset
Set password for PPC
PC: backup previously sync'ed files folder
PC ActiveSync: delete previous partnership. Don't delete sync'ed files folder
CPL > System > About: Set DeviceID = XDAExec
Connect PPC and PC with cable
Sync only Contacts, Calendar (all), Tasks, Favourites
Sync files. Replace the items on the device
PocketBreeze: import settings
PocketPlus: import settings
PocketInformant: run and let it fanny about
PocketWeather (on PocketBreeze tab): import settings
Run ListPro. Enter registration code
Disconnect from PC
Set up phone speed dials
Set up voicedial tags
Set up ActiveSync via Bluetooth to Workstation
Set up bond to headset
Set up bond to GPS thingy. Choose Serial Port as profile
Start TomTom Navigator. Run through startup.
InternetExplorer: sort out view settings. Set default page to about:blank
Choose Transcriber input method. Import settings file
This is my .reg file that does almost everything I need done in one step:
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings]
"Group"=dword:00000002
[HKEY_CURRENT_USER\ControlPanel\Backlight]
"QKeyLedTimeout"=dword:0000001e
[HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client]
"Keyboard Layout"="00000409"
"BitmapPersistCacheSize"=dword:00000001
"BitmapCacheSize"=dword:00000015
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00004000
[HKEY_LOCAL_MACHINE\nls\overrides]
"SSDte"="d/M "
[HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD]
"PieHomePage"="about:blank"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell]
"TBOpt"=hex:\
13,00,00,00
It makes a massive difference using commercial software that has a reliable import/export process for the settings and this, IMHO, is usually the biggest difference between paid-for software and freeware alternatives.
Silicon, don't u want to re-post your post here:
http://forum.xda-developers.com/viewtopic.php?t=31697
We need more of these 'standard' configs to help new users get up n running without giving up on their universal.
dude, your screen - how?
craigiecraigie4
how did you make htc look like that?
is it standard? emailable? I don't really want the merc style if it can be changed, but its a nice screen all the same
Re: dude, your screen - how?
simon_darley said:
craigiecraigie4
how did you make htc look like that?
is it standard? emailable? I don't really want the merc style if it can be changed, but its a nice screen all the same
Click to expand...
Click to collapse
You don't want merc!! well u can just f off then! ;-)
It's WisbarAdvance2 with WAD - see another post I started in this forum. u can put in on any universal, with whatever walpaper u want, and there are plenty of free skins
Re: dude, your screen - how?
craigiecraigie4 said:
It's WisbarAdvance2 with WAD - see another post I started in this forum. u can put in on any universal, with whatever walpaper u want, and there are plenty of free skins
Click to expand...
Click to collapse
Whatever it is, it's distracting to have such a big picture in your signature in such text-based forums.
Sorry craigiecraigie4. Don't mean to offend. Just MHO.
I´m using pocket informant for PIM management and HD Tweaks to remap the softkeys, however, I can´t assign to any of the softkey the pocket informant contacts or calendar, only the WM.
Any ideas on how to solve this?
You need to modifye keys in the registry. Here is how I've done it on my HD (it's in french, so you may have to translate the path for your version)
Using a registry editor,
- I have assigned the label "Agenda" to the left soft key :
HKLM\Software\HTC\Manila\HomeLSKText="Agenda"
- I've assigned the week view to the key :
HKLM\Software\HTC\Manila\HomeLSKPath="Windows\menu démarrer\programmes\informant utils\piweek.lnk"
Note that the "Informant Utils" folder contains a shortcut for each view, you can choose whichever you want, their name are self explanatory.
I've configured the x button to close all applications but PI (to have it always active and then have a faster access) :
- start PI
- go to settings>Task manager> tab "current" (or whatever the first tab name is in your language)
- tap and hold on the PI task, then select "add to exclusive"
That way, when I click on the left soft key (now labeled "Agenda") I switch to PI in week view. I can then switch from PI by using the Home button or the x button, PI will stay active and the next switch will be very fast.
Nor working for me...
I should work. You must have made a mistake somwhere. Did you do a soft reset? Did you doublecheck the path to be sure you wrote it correctly?
You can also try the program HD Tweak wich allow you to set that in section 14.4 & 14.5.
My answer to HTCZar was irrelevant, because Claude already anwered.
As I said in the first post, I tried to use HD Tweaks, however the optios presented don´t include the PI calendar\agenda, how do I put them there?
Coude said:
- I've assigned the week view to the key :
HKLM\Software\HTC\Manila\HomeLSKPath="Windows\menu démarrer\programmes\informant utils\piweek.lnk"
Click to expand...
Click to collapse
Could you possibly check the link properties for this and month view? Just for anyone that might have got rid of all those extra links cluttering up his 'All programs list'...
What I'd like to have set up, the left soft key goes to Pocket Informant (maybe the screen where you choose what view you want) and when I tap an appointment in TF3D it loads the agenda view, using SSMaPa. (Can you get me a link for this?)
Here is the link as read in the properties of the shortcut :
For PIWeek.lnk :
"\Program Files\WebIS\PocketInformant\PITab.exe" 4?\Program Files\WebIS\PocketInformant\PITab.exe,-113
For PIMonth :
"\Program Files\WebIS\PocketInformant\PITab.exe" 4?\Program Files\WebIS\PocketInformant\PITab.exe,-114
To get rid af tho extras link in 'All program list', it would have been better to move the shortcut in another folder, so you could still use them if needed...
I haven't used SSMaPa yet (but I planned to) therefore I can't help you on this matter. Sorry.
Yeah, I should have just moved them... silly me. Thanks for your help. Could you possibly give the link to the agenda view too? Thanks.
Is there a link to 'view' view?
I´ll Try that Again then.
Is it possoble to change the hardware keys function?
Works fine! Thank you very much! @claude
Where do you put the path and exactly how are you writing it ?
@AndyCr15
Could you possibly give the link to the agenda view too?
Click to expand...
Click to collapse
"\Program Files\WebIS\PocketInformant\PITab.exe" 2?\Program Files\WebIS\PocketInformant\PITab.exe,-111
Is there a link to 'view' view?
Click to expand...
Click to collapse
Sorry, I couldnt find one.
@HTCzar
Where do you put the path and exactly how are you writing it ?
Click to expand...
Click to collapse
1. You need to install registry editor. I use Resco Registry Editor, but there are some other.
2. Open the registry and follow the tree up to the parameter HomeLSKPath. Taping on the parameter should provide a field where to keyin the path string.
3. Quit the registry editor
4. Restart TF3D or do a Soft Reset.
I´ve done that, and i´m also using Resco editor.
The path strings begins with Windows\....PIWeek.lnk right? it takes no " "?
Hi.
I was curious if anyone knows a way to re-map the internet browser shortcut key that is on the bottom right of the Sprint HTC Snap. I would like to have it open Skyfire instead of IE. Skyfire is set as my default browser but the button still opens IE. Also, do the same thing with the Mycircle key but change it to open Task Manager.
Thanks.
The file is in \Windows and it's called short_circle.lnk. Just make a new .lnk and call it short_circle.lnk and copy it to \Windows overwriting the old one.
Hi I got the Inner Circle key remapped using both short_circle.lnk and long_circle.lnk.
I am still having trouble getting the internet key to remap to Skyfire. I have tried making PIE.lnk, short_IE.lnk, long_IE.lnk, short_PIE.lnk, long_PIE.lnk. None of these seems to do the trick. Any ideas?
webworker01 said:
Hi I got the Inner Circle key remapped using both short_circle.lnk and long_circle.lnk.
I am still having trouble getting the internet key to remap to Skyfire. I have tried making PIE.lnk, short_IE.lnk, long_IE.lnk, short_PIE.lnk, long_PIE.lnk. None of these seems to do the trick. Any ideas?
Click to expand...
Click to collapse
That key may be hardware coded into the keyboard driver. Not sure.
Hello,
i have an German Model of the Snap.
And i don´t Use Inner Circle. So the TaskManager will be the best Applikation on this Button.
But it don´t work.
I Edit the Files
- InnerCircle.lnk
- Short_Circle.lnk
and Change ist to the TaskMgr.exe.
I Restart my Phone, but the Button always Call the InnerCircle Funktion.
What is my mistake?
Greatings
Christian
c.radi said:
Hello,
i have an German Model of the Snap.
And i don´t Use Inner Circle. So the TaskManager will be the best Applikation on this Button.
But it don´t work.
I Edit the Files
- InnerCircle.lnk
- Short_Circle.lnk
and Change ist to the TaskMgr.exe.
I Restart my Phone, but the Button always Call the InnerCircle Funktion.
What is my mistake?
Greatings
Christian
Click to expand...
Click to collapse
Christian, instead of editing the Short_circle.lnk file directly, try as follows:
1. Copy the TaskManager.lnk file from your Windows/Start Menu to another folder (i.e /Storage Card)
2. go in /Storage Card and rename TaskManager.lnk as Short_Circle.lnk
3. Copy this file into /Windows
This should work..at least it did for myself.
Regards
Hello,
thanks for your reply, but it doesn´t works.
The InnerCircle Key always start the Inner Circle Applikation.
Greetings
Christian
1) use total commander or the likes,
2) change the read-only attribute on the short_circle.lnk.
3) then replace the shortcut with whatever application you'd like to run and save it as short_circle.lnk.
Thanks! This worked for me.
ookba said:
That key may be hardware coded into the keyboard driver. Not sure.
Click to expand...
Click to collapse
Hi there,
Do you have more info on that ? I have a S521 (Frenchy ass, fruity ass), and the so-called internet key is for Live Mess-enger. I would be really interested in mapping a different function to that key.
Hi,
is it possible to re-mapping also key dedicated for Live Messenger? I try it in the same way, like for Inner Circle (which work correctly), but without effect.
I know this reply is late, but for anyone still playing around with HTC SNAPs:
lojza_ said:
Hi,
is it possible to re-mapping also key dedicated for Live Messenger? I try it in the same way, like for Inner Circle (which work correctly), but without effect.
Click to expand...
Click to collapse
Yep I managed this one:
do the same for \Windows\Start Menu\Messaging.lnk
I Used Total Commander, edited Short_Circle.lnk to be non read only
Found the shortcut i wanted to use, edited the file and copied the shortcut link (do a select all), then edit Short_Circle.lnk, remove the old shortcut path and select all and then paste. Enjoy your Custom single Button shortcut key
I have Telstra Branded Snaps, and i had to remove the security off the phones before i could untick the read only attribute on the Short_Circle.lnk shortcut.
To remove the security:
Install "Clear Security.cab"
Install and Launch Microsoft’s Security Configuration Manager on your PC
Select Security Off from the drop down menu and click the Provision button, the program will install a file called Tool.cab on the mobile device.
MS Security Configuration Manager available here:
http://www.microsoft.com/downloads/...8c-d587-47e0-908b-09fee6ea517a&displaylang=en
Hi guys!
I tried to change my right softkey from "Menu" to "BT Toggle" (a bluetooth switching program I've already installed) using Advanced Configuration Tool 3.3 but it didn't work on my HD2.
When I restart the HD2, the key is changed to "BT Toggle" but after entering the PIN and after HTC sense started the key is named "Menu" again.
I looked into the registry but all is right there, the changes were saved. But why is the new softkey name only displayed before starting HTC sense and not after?
Any ideas?
Best regards,
Oliver
Home RSK
I wouldn't mess with the right soft key of sense.
Only the left.
How would you edit the quick tabs?
If you aren't using sense, only the WM interface, you can edit those SK's.
Did you get BT Toggle to work?
It wouldn't for me.
Benz-Driver said:
Hi guys!
I tried to change my right softkey from "Menu" to "BT Toggle" (a bluetooth switching program I've already installed) using Advanced Configuration Tool 3.3 but it didn't work on my HD2.
When I restart the HD2, the key is changed to "BT Toggle" but after entering the PIN and after HTC sense started the key is named "Menu" again.
I looked into the registry but all is right there, the changes were saved. But why is the new softkey name only displayed before starting HTC sense and not after?
Any ideas?
Best regards,
Oliver
Click to expand...
Click to collapse
This one works with my HD2:
http://forum.xda-developers.com/showpost.php?p=4292054&postcount=11
Sorry, what do you mean with
I wouldn't mess with the right soft key of sense.
Only the left.
Click to expand...
Click to collapse
My english isn't that good...
Using this post by vovichek62 as a guide I used the following process to change the right soft key:
Download LuaDec from here and extract
Copy \Windows\07c67730_manila from device to luadec folder (and somewhere else as a backup).
Open a command prompt there
Run
Code:
luadec 07c67730_manila > 07c67730_manila.lua
Open 07c67730_manila.lua in an editor like notepad
You need to change two functions. The fuction above "SetSoftKey = l_0_0" sets the text for the soft buttons. This is my modified line:
Code:
_application:SetRightSoftkey(Softkey(Locale:GetString("IDS_CONTACTS"), OnMenuPressed))
I think it was originally set to IDS_MENU. That "OnMenuPressed" is the function called when you press it.
So now you need to change that function - The function above "OnMenuPressed = l_0_0". On mine this is now:
Code:
l_0_0 = function()
_application.Navigation:Navigate(URL("Manila://people/browserlayer/peopleAll.page"), false)
end
Now, back in the command prompt run:
Code:
luac -o 07c67730_manila 07c67730_manila.lua
and copy 07c67730_manila back to your device.
If you were up for it you could probably copy some of the left soft key code to allow changing the right soft key in the registry.
Xaddict is right, once you do this you can no longer tweak your home buttons. If I need to change one I go back in to the registry and find:
HKEY_LOCAL_MACHINE\Software\HTC\Manila\Home\0\IsSet (where 0 is the button number) and change the value to 0. If you then restart manila (or your device) you can change that button. It will still show the old text and icon until you do. I also made a simple .reg which clears all the buttons, attached. For me it was worth this hassle as I could remove the People tab.
Tx fot BT Toggle
Nice one.
Thanks very much : )
Benz-Driver said:
This one works with my HD2:
http://forum.xda-developers.com/showpost.php?p=4292054&postcount=11
Sorry, what do you mean with
My english isn't that good...
Click to expand...
Click to collapse
iv just made a new 07c67730_manila file that reads from the registry
so all you have to do is download my 07c67730_manila file
http://www.filefront.com/16489283/07c67730_manila
then copy it to your windows folder (backup the old 07c67730_manila file)
then in registry at:
HKLM > Software\HTC\Manila
Change:
HomeRSKPath
HomeRSKText
HomeRSKArguments
to anything you like
for contacts:
HomeRSKPath Manila://people\browserlayer\?.page
HomeRSKText anything you like something liek contacts or all people
HomeRSKArguments leave this blank
how to remove quick Links without the menu:
all you do is hold the quick link you dont want for about 3-4 seconds and then drag it away this works on my dutty rom but gessing its the same for all roms
I am using HD2Tweaks - beats the hassle of backing up/copying manila files, editing registry entries - to assign the left and right softkey at the Home/Today screen.
But the available options are a fixed set.
Telephone (default for left), Menu (default for right), Backlight, Contacts, Contacts List, Notes, Calendar WM, Calendar WM (week view), Calendar WM (month view), New Appointment, Tasks, Messaging, SMS/MMS, Internet, Opera, Camera, Album, Comm Manager, File Explorer, Google Maps, Internet Sharing, MyPhone, RSS Hub, Radio FM, Windows Live, You Tube.
http://forum.xda-developers.com/showthread.php?t=588652
HD2Tweaks does not work for me on duttys rom so if HD2Tweaks works thats grate but mine is like a backup option
Holding quicklinks for 3-4 secs dont work for me. I'm on 1.66 WWE stock ROM. Need help on how to remove quicklinks. Also does anyone know the path for New SMS on LSK or RSK? Thanks!