Database Users

BT Icon?

I search the link who launch the icon of BT on the botton right. I lost the icon and I don't want make an hard reset whith reinstall for retreive it.
Thank's

hope this help
try this:
There is a workaround for this problem.
It's not pretty, it requires hacking the registry, but it works.
I found it at http://www.ppc-welt.info/community/showthr...7403#post397403, but had to make a slight adjustment.
I assume that you know
- How to install form a CAB file
- How to create and edit a shortcut on your Pocket PC
- How to edit the registry on your Pocket PC
Ready? Here we go:
1) Download NoPluginsToday (you'll most likely want the ARM version) from http://www.ictinus.com/NoPluginsToday/
2) Install the CAB somewhere. Make sure you know the exact location of NoPluginsToday.exe (e.g. \Storage\NoPluginsToday\NoPluginsToday.exe)
3) Create a shortcut to NoPluginsToday.exe in \Windows\Startup. Name this shortcut ZzzNoPluginsToday, so that it is last in the list of shortcuts to be launched.
4) Start a registry editor, and go to HKLM\init. Look for keys named LaunchXX. You'll want to create a new String key named LaunchYY, where YY is a bigger number than any of the XX you found. I created Launch99. The value for LaunchYY is the exact location of NoPluginsToday.exe (e.g. \Storage\NoPluginsToday\NoPluginsToday.exe) you looked up earlier.
Now you're set! Do a soft reset, and see your Bluetooth icon again! You'll notice your startup time may be a little longer.
How does it work?
The BT icon disappears because of a timeout issue when loading plugins.
We solve this by using NoPluginsToday, which switches all Today plugins off, remembers the settings, and reactivates them the next time it is executed.
By calling NoPluginsToday twice, once via the registry (early) and then again via \Windows\Startup (late), we "postpone" the loading of Today plugins until after the BT icon has been activated. That's your longer startup time for you.
Hope this helps!
(from Pocket breeze website forum)

Thank's I try it when I have 20 minutes

Timon said:
Thank's I try it when I have 20 minutes
Click to expand...
Click to collapse
hi Timon,
you can maybe try this first:
http://forum.xda-developers.com/viewtopic.php?t=16252
buzz

Can anyone help with any of these???

Hi guys! Had my M5000 for about 10 days now and finally getting used to it but I wonder if anyone canm help with any of the following questions??
1. How do we edit the dictionary?? I can't even find how to add words and that would be REALLY handy as I normally use the phone pad for typing!
2. Can we select a default input method? (I use the phone pad but it always reverts to popup keyboard)
3. Can we change what the soft keys to on the today screen? (I'd dearly love to change Calendar to Messaging!)
4. I prefer to keep event, program and notification sounds all turned on but can I disable the start button click and the noise it makes when opening programs or settings??
5. My device is set to turn off after three mins - Is there a way to make it turn on again when I press ANY button? (I swear the power button moves in the dark lol)
6. When I go into my games menu it takes just over 40 seconds to list them all (I have about 20 games all installed on my memory card) - Does anyone know what might cause this??
7. Is there a way to get these phones to receive files over bluetooth from other make of phone? Mates with both Nokias and Sony have tried sending me pictures over BT but no luck
Think that's it for now - Sorry if any of these are stupid questions with obvious answers that I've missed but I'm pretty sure I've tried every damn menu on the device now lol! I'm also hoping that there's things here that other people would also like ot know!
Thanks

1. The dictionary can have words added to it by making a document in Word (named, for example: 'Personal dictionary') and saving it. Any word you add will be in the dictionary from that point on (as long as the document is not deleted).
3. Try registry hack here: http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
5. Try 'Settings' - 'Buttons' - Lock tab - 'Do not lock buttons'

4. Not sure if there's a reg hack for it, I've searched for the filenames below and their paths to no avail. but the only other way would be to remove the following files from \Windows:
hwandsw.wav
MenuPop.wav
If you remove or copy these to a different location, then you won't hear anything. During the old XDA / XDA2 and i phases, I used to swap the WM2002/3 sounds for PC Windows noises. Later, when it came to 2005, I used the set contained on here as they were much nicer.
6. If they're on the SD card then presumably it has to search the SD for all of the .exe files. This could be improved by perhaps defragging your card (StorageTools is a good app for this). Another thing may be to try creating links to your game .exes in a folder on the PHONE, and replace the Start > Programs > Games icons with links to the PHONE copies. You can add / remove these by going to \Windows\Start Menu\Programs\Games
7. http://wiki.xda-developers.com/index.php?pagename=Universal_Registry - look for the section entitled To change the ability to receive files via Bluetooth (OBEX)
Ant

Hi
The registry obex 'hack' does exactly the same thing as going to settings, comms, beam, and clicking the selection box 'recieve all beams' Beam = Ir AND Bluetooth.
I find that the button lock setting does not work. With it set to 'do not lock' you still cant press any button to switch the unit on
Nigel

Thanks for the tips guys
Maybe I should have been more specific with the dictionary thing - I want to be able to add words to the predictive text (Town/friends names for example) - Does adding them to the dictionary do this??

Yes, adding any words to the dictionary adds them to predictive text, as well. The predictive text uses the dictionary.

Plus you'll find that as you type more and more, it will automatically add words you spell out it doesn't recognise.
Ant

Thanks guys - Especially for the registry link - Some REALLY great stuff there
hmmmmm... One quickie though:
For example, to change the left-hand softkey to start Pocket Excel you would set
* HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112\(Default) = Pocket Excel
* HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112\Open = \windows\pxl.exe
Anyone know how I set this to open contacts???

Remap Softkeys

I´m using pocket informant for PIM management and HD Tweaks to remap the softkeys, however, I can´t assign to any of the softkey the pocket informant contacts or calendar, only the WM.
Any ideas on how to solve this?

You need to modifye keys in the registry. Here is how I've done it on my HD (it's in french, so you may have to translate the path for your version)
Using a registry editor,
- I have assigned the label "Agenda" to the left soft key :
HKLM\Software\HTC\Manila\HomeLSKText="Agenda"
- I've assigned the week view to the key :
HKLM\Software\HTC\Manila\HomeLSKPath="Windows\menu démarrer\programmes\informant utils\piweek.lnk"
Note that the "Informant Utils" folder contains a shortcut for each view, you can choose whichever you want, their name are self explanatory.
I've configured the x button to close all applications but PI (to have it always active and then have a faster access) :
- start PI
- go to settings>Task manager> tab "current" (or whatever the first tab name is in your language)
- tap and hold on the PI task, then select "add to exclusive"
That way, when I click on the left soft key (now labeled "Agenda") I switch to PI in week view. I can then switch from PI by using the Home button or the x button, PI will stay active and the next switch will be very fast.

Nor working for me...

I should work. You must have made a mistake somwhere. Did you do a soft reset? Did you doublecheck the path to be sure you wrote it correctly?
You can also try the program HD Tweak wich allow you to set that in section 14.4 & 14.5.

My answer to HTCZar was irrelevant, because Claude already anwered.

As I said in the first post, I tried to use HD Tweaks, however the optios presented don´t include the PI calendar\agenda, how do I put them there?

Coude said:
- I've assigned the week view to the key :
HKLM\Software\HTC\Manila\HomeLSKPath="Windows\menu démarrer\programmes\informant utils\piweek.lnk"
Click to expand...
Click to collapse
Could you possibly check the link properties for this and month view? Just for anyone that might have got rid of all those extra links cluttering up his 'All programs list'...
What I'd like to have set up, the left soft key goes to Pocket Informant (maybe the screen where you choose what view you want) and when I tap an appointment in TF3D it loads the agenda view, using SSMaPa. (Can you get me a link for this?)

Here is the link as read in the properties of the shortcut :
For PIWeek.lnk :
"\Program Files\WebIS\PocketInformant\PITab.exe" 4?\Program Files\WebIS\PocketInformant\PITab.exe,-113
For PIMonth :
"\Program Files\WebIS\PocketInformant\PITab.exe" 4?\Program Files\WebIS\PocketInformant\PITab.exe,-114
To get rid af tho extras link in 'All program list', it would have been better to move the shortcut in another folder, so you could still use them if needed...
I haven't used SSMaPa yet (but I planned to) therefore I can't help you on this matter. Sorry.

Yeah, I should have just moved them... silly me. Thanks for your help. Could you possibly give the link to the agenda view too? Thanks.
Is there a link to 'view' view?

I´ll Try that Again then.
Is it possoble to change the hardware keys function?

Works fine! Thank you very much! @claude

Where do you put the path and exactly how are you writing it ?

@AndyCr15
Could you possibly give the link to the agenda view too?
Click to expand...
Click to collapse
"\Program Files\WebIS\PocketInformant\PITab.exe" 2?\Program Files\WebIS\PocketInformant\PITab.exe,-111
Is there a link to 'view' view?
Click to expand...
Click to collapse
Sorry, I couldnt find one.
@HTCzar
Where do you put the path and exactly how are you writing it ?
Click to expand...
Click to collapse
1. You need to install registry editor. I use Resco Registry Editor, but there are some other.
2. Open the registry and follow the tree up to the parameter HomeLSKPath. Taping on the parameter should provide a field where to keyin the path string.
3. Quit the registry editor
4. Restart TF3D or do a Soft Reset.

I´ve done that, and i´m also using Resco editor.
The path strings begins with Windows\....PIWeek.lnk right? it takes no " "?

Please help - can't change the right softkey!

Hi guys!
I tried to change my right softkey from "Menu" to "BT Toggle" (a bluetooth switching program I've already installed) using Advanced Configuration Tool 3.3 but it didn't work on my HD2.
When I restart the HD2, the key is changed to "BT Toggle" but after entering the PIN and after HTC sense started the key is named "Menu" again.
I looked into the registry but all is right there, the changes were saved. But why is the new softkey name only displayed before starting HTC sense and not after?
Any ideas?
Best regards,
Oliver

Home RSK
I wouldn't mess with the right soft key of sense.
Only the left.
How would you edit the quick tabs?
If you aren't using sense, only the WM interface, you can edit those SK's.
Did you get BT Toggle to work?
It wouldn't for me.
Benz-Driver said:
Hi guys!
I tried to change my right softkey from "Menu" to "BT Toggle" (a bluetooth switching program I've already installed) using Advanced Configuration Tool 3.3 but it didn't work on my HD2.
When I restart the HD2, the key is changed to "BT Toggle" but after entering the PIN and after HTC sense started the key is named "Menu" again.
I looked into the registry but all is right there, the changes were saved. But why is the new softkey name only displayed before starting HTC sense and not after?
Any ideas?
Best regards,
Oliver
Click to expand...
Click to collapse

This one works with my HD2:
http://forum.xda-developers.com/showpost.php?p=4292054&postcount=11
Sorry, what do you mean with
I wouldn't mess with the right soft key of sense.
Only the left.
Click to expand...
Click to collapse
My english isn't that good...

Using this post by vovichek62 as a guide I used the following process to change the right soft key:
Download LuaDec from here and extract
Copy \Windows\07c67730_manila from device to luadec folder (and somewhere else as a backup).
Open a command prompt there
Run
Code:
luadec 07c67730_manila > 07c67730_manila.lua
Open 07c67730_manila.lua in an editor like notepad
You need to change two functions. The fuction above "SetSoftKey = l_0_0" sets the text for the soft buttons. This is my modified line:
Code:
_application:SetRightSoftkey(Softkey(Locale:GetString("IDS_CONTACTS"), OnMenuPressed))
I think it was originally set to IDS_MENU. That "OnMenuPressed" is the function called when you press it.
So now you need to change that function - The function above "OnMenuPressed = l_0_0". On mine this is now:
Code:
l_0_0 = function()
_application.Navigation:Navigate(URL("Manila://people/browserlayer/peopleAll.page"), false)
end
Now, back in the command prompt run:
Code:
luac -o 07c67730_manila 07c67730_manila.lua
and copy 07c67730_manila back to your device.
If you were up for it you could probably copy some of the left soft key code to allow changing the right soft key in the registry.
Xaddict is right, once you do this you can no longer tweak your home buttons. If I need to change one I go back in to the registry and find:
HKEY_LOCAL_MACHINE\Software\HTC\Manila\Home\0\IsSet (where 0 is the button number) and change the value to 0. If you then restart manila (or your device) you can change that button. It will still show the old text and icon until you do. I also made a simple .reg which clears all the buttons, attached. For me it was worth this hassle as I could remove the People tab.

Tx fot BT Toggle
Nice one.
Thanks very much : )
Benz-Driver said:
This one works with my HD2:
http://forum.xda-developers.com/showpost.php?p=4292054&postcount=11
Sorry, what do you mean with
My english isn't that good...
Click to expand...
Click to collapse

iv just made a new 07c67730_manila file that reads from the registry
so all you have to do is download my 07c67730_manila file
http://www.filefront.com/16489283/07c67730_manila
then copy it to your windows folder (backup the old 07c67730_manila file)
then in registry at:
HKLM > Software\HTC\Manila
Change:
HomeRSKPath
HomeRSKText
HomeRSKArguments
to anything you like
for contacts:
HomeRSKPath Manila://people\browserlayer\?.page
HomeRSKText anything you like something liek contacts or all people
HomeRSKArguments leave this blank
how to remove quick Links without the menu:
all you do is hold the quick link you dont want for about 3-4 seconds and then drag it away this works on my dutty rom but gessing its the same for all roms

I am using HD2Tweaks - beats the hassle of backing up/copying manila files, editing registry entries - to assign the left and right softkey at the Home/Today screen.
But the available options are a fixed set.
Telephone (default for left), Menu (default for right), Backlight, Contacts, Contacts List, Notes, Calendar WM, Calendar WM (week view), Calendar WM (month view), New Appointment, Tasks, Messaging, SMS/MMS, Internet, Opera, Camera, Album, Comm Manager, File Explorer, Google Maps, Internet Sharing, MyPhone, RSS Hub, Radio FM, Windows Live, You Tube.
http://forum.xda-developers.com/showthread.php?t=588652

HD2Tweaks does not work for me on duttys rom so if HD2Tweaks works thats grate but mine is like a backup option

Holding quicklinks for 3-4 secs dont work for me. I'm on 1.66 WWE stock ROM. Need help on how to remove quicklinks. Also does anyone know the path for New SMS on LSK or RSK? Thanks!

VJ KeyPress - Send a '1' to the phone.

Okay, so I'm using Google Voice with call presentation on, and I want to setup a shortcut to send a '1' to the phone to accept an incoming call. I just got a bluetooth watch and I want to be able to have the watch send the key so I don't need to dig out my phone when I'm in the car.
So, to test this a little bit I installed KeyPress and I setup that if I double press my start button in AE Buttons, it runs KeyPress with the parameter of 97. This works perfectly. No issues at all.
But when I try to create a short cut, everything fails. If I just press tap VJKeyPress, I get the little "help" screen. If I create a shortcut, and tap it, I also get the help screen. But when I try to modify the shortcut to pass the '97', then it fails.
I'm guessing that I'm missing something in the syntax, but I can't figure it out.
I have the path, in quotes:
"\P F\vijay555\VJKeyPress\VJKeyPress.exe"
Then I've put 97 at the end just plain, in quotes, in <>, I've put in right behind the .exe inside the quotes... Nothing seems to work at all. I'm at a total loss.
Anyone have a suggestion?

Hi,
Could you send me a screenshot of the configuration screen in AE Buttons.
I can't think why it wouldn't work, but what you could do is create a normal shortcut that launches VJKeypress with the required parameters, and then use AE Button to launch that .lnk shortcut itself, rather than VJKeyPress.exe
Should you get really stuck, VJBrisk might be able to help you, but I think the above should be adequate.
Drop me a PM (and post in the thread) again if you get stuck.
V

Oops... I didn't think I explained myself properly.
The AE Buttons is WORKING. It's the normal shortcut link that I can't get to work... and that's the thing I really need to get working.

Sorry, my bad, didn't read it properly.
I normally put example shortcuts in my cabs, but curiously I've got none in the cab on my phone. Can't believe the app is nearly 5 years old! Wow.
Anyway, I just tried making a shortcut.
If you paste the following:
Code:
55#"\Program Files\Vijay555\VJKeyPress\VJKeyPress.exe" 133
into a text document, and rename it Test.lnk, and copy that over to your phone, it should create a shortcut that locks your phone.
If that works, just change the parameter to do what you want.
What app are you using to create shortcuts?
And what's the significance of the \p\f in your first post?
V

A bit more information...
I tried to write a simple MortScript to run this as well. According to the MortScript manual, to run an app, you use this command:
Run ( "\path\AppName" [,"Parameter"] )
In other words, the path and the command first, and then put in the optional parameter. When I put in just the app name:
Run( "\Program Files\vijay555\VJKeyPress\VJKeyPress.exe" )
And run the script, I get the little help popup as I would expect. When I put in the parameter:
Run( "\Program Files\vijay555\VJKeyPress\VJKeyPress.exe" , "97" )
Nothing happens.

vijay555 said:
If you paste the following:
Code:
55#"\Program Files\Vijay555\VJKeyPress\VJKeyPress.exe" 133
into a text document, and rename it Test.lnk, and copy that over to your phone, it should create a shortcut that locks your phone.
Click to expand...
Click to collapse
Okay... well that locked the phone fine.
If that works, just change the parameter to do what you want.
Click to expand...
Click to collapse
I'm using both the text editor on Windows and Word on my PPC (not saving it in Word Format when prompted).
What app are you using to create shortcuts?
Click to expand...
Click to collapse
Just Copy the original file and then paste as shortcut.
And what's the significance of the \p\f in your first post?
Click to expand...
Click to collapse
Didn't feel like typing out \Program Files\.

Okay, so using the '133' definitely worked, but when I change it to 97 (the code to send NumPad1), it doesn't work.
But it DOES work when I tell AE Buttons to run VJKeyPress with the parameter of 97. Ugh... very odd.
Just for the fun of it, I also tried setting up a button in AE Buttons to run the shortcut that has '97' in it. That didn't work. I'm at a complete loss to figure out what's going on.

It may be that the keypress is occurring, but it's being fed into AE Buttons rather than the Phone Dialler, ie if when you press the required button, AE Button becomes active, which launches VJKeyPress, which presses 1 <b>within</b> AE Button, not the phone dialler.
You could test this by trying other keys and seeing what happens.
Also try activating Word or something else on your phone and launch the shortcut - see if the desired key gets pressed.
Also, you said NumPad1 - this is the number pad on a pc keyboard.
Try 49, which is just key 1.
V