I installed the .cab file for TD2 Tools for Win 6.5 v2, and got the following message: This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.
Now What?
It was a good idea to begin with "not opening a new thread" for this. Post it in the TD2tools-thread, but not before reading it totaly...
Thanks for your outstanding help, really appreciate it. I did a freaking search of "TD2 tools" and got pages of crap (and by the way, if you go to that thread and do a thread search for .net, you will get NO MATCHES. I am trying to find if someone with the TOPAZ (PURE) has had the same issue. So next time, I will type in that I did a search and did not find the answer..did you get your senior member by giving those type of responses, or by actually doing enough posting to help people?
AGAIN, THANKS FOR THE HELP. You should spend some time over on the KAISER site flaming people so that they don't come back looking for help and wander around bricking their phones.
jdwilson said:
I did a freaking search of "TD2 tools" and got pages of crap (and by the way, if you go to that thread and do a thread search for .net, you will get NO MATCHES.
Click to expand...
Click to collapse
It's even a sticky man... First thing you do is reading the stickys...
Had the same problem. Also couldn't find any reference re .Net 3.5 installation searching the sticky thread.
Successfully installed it from http://bit.ly/kA4l3 via ActiveSync.
Learn to search td2+tools+net+error
There's a cf3.5-prob with some new roms... No solution found yet. Use Advanced Config or something else.
freznice said:
Had the same problem. Also couldn't find any reference re .Net 3.5 installation searching the sticky thread.
Successfully installed it from http://bit.ly/kA4l3 via ActiveSync.
Click to expand...
Click to collapse
Also that is not working for some roms... Allready tried that for someone, even I don't help people...
Related
When I try to run a cab file on the XDA Exec I get the following error:
Unable to install, Uncertificed sytem software detected.
How do I work around this, do I need to do something to the CAB file or the O/S to make it accept the file?
TIA
Tony
tonyb15re said:
When I try to run a cab file on the XDA Exec I get the following error:
Unable to install, Uncertificed sytem software detected.
How do I work around this, do I need to do something to the CAB file or the O/S to make it accept the file?
TIA
Tony
Click to expand...
Click to collapse
In the XDA FTP secton ,there is a CAB file to disable security
If you dont know where is the FTP, please use the search button, or go to wiki of xda dev and near the bottom there is a link to FTP tutorial
Ive spent most of the afternoon searching, Ive run the following cab file which I believe you are referring to Default_Signed_DisableSecurity.CAB if it isnt then be a good chap and point me at the right file name, the search engine on this site isnt that accurate!!!!
Oh and it doesnt help trying to make smart comments, if you dont want to help then please dont post. not everyone asks a question without doing research beforehand.
tonyb15re said:
Ive spent most of the afternoon searching, Ive run the following cab file which I believe you are referring to Default_Signed_DisableSecurity.CAB if it isnt then be a good chap and point me at the right file name, the search engine on this site isnt that accurate!!!!
Oh and it doesnt help trying to make smart comments, if you dont want to help then please dont post. not everyone asks a question without doing research beforehand.
Click to expand...
Click to collapse
First of all, Yes, that is the file I was talking about.
Second, if you read my post correctly, I was commenting on using the SEARCH option with regards to HOW TO ACCESS the FTP site. as there are a lot of people who do not know how to access the FTP site and in the wiki, it is very carefully explained on how to do it.
So, if you think I am making smart comments, then I kinda feel offended. I was trying to help. and am not sure I did but I don't see any SMART COMMENT in my reply. Did I say you didnt research? How come you go off all agressive?
Please be clearer regarding what part of my reply was a "SMART COMMENT" so I know what went wrong.
If I offended you then I appologise, I have been on many forums, when I ask a quesiton the first person that reads the post generally comes back with a do a search or look in the FTP assuming that I have not already done that. I always exhaust all avenues that I can before posting. I have tried the Hacks over and over to no avail. the error message is still there. The CAB file in quesiton was extracted from an XDA2S so may be incompatible??
tonyb15re said:
If I offended you then I appologise, I have been on many forums, when I ask a quesiton the first person that reads the post generally comes back with a do a search or look in the FTP assuming that I have not already done that. I always exhaust all avenues that I can before posting. I have tried the Hacks over and over to no avail. the error message is still there. The CAB file in quesiton was extracted from an XDA2S so may be incompatible??
Click to expand...
Click to collapse
No prob, we are all here to help eachother. Since the XDA2S is WM2003SE and not WM5 maybe this is the problem. What thas this particular CAB file do? Maybe someone can suggest an alternative
The CAB File contains the BBConnect Software
tonyb15re said:
The CAB File contains the BBConnect Software
Click to expand...
Click to collapse
Has that something to do with BlackBerry? What does it do?
Its the Blackberry software for PDA's unfortunately it seems to be locked to BlueAngel at the moment, I would be keen to find a Universal WM5 version!!
Its the Blackberry software for PDA's unfortunately it seems to be locked to BlueAngel at the moment, I would be keen to find a Universal WM5 version!!
tonyb15re said:
Its the Blackberry software for PDA's unfortunately it seems to be locked to BlueAngel at the moment, I would be keen to find a Universal WM5 version!!
Click to expand...
Click to collapse
Okay maybe it is not compatible with WM5 yet, sorry but i can't help you
Cheers
Hi, guys!
How can I install new touch cube in my device?
I try to install FTOUCHflo but it doesn't install it.
Oh! It is very simple, just click on SEARCH and then start reading.
Already done.
No results
The SCLPF cube is not an exact copy (in some ways it is better) or you can use Kona's cube, both are in this forum.
matiu said:
Already done.
No results
Click to expand...
Click to collapse
You allready read the whole 76 pages of this thread?
And you still don't know how to install it?
Well I would suggest you to send your device to efrost, and donate 100 bucks, I'm sure he would be able to find a way to put it on your device...
If not I suggest you read the whole thread, read the instructions, and if you got questions, asked in that thread itselfs...
Good Luck
I was told to download SDKcert (.cab) to confirm the missing certificates that prevented the installation on my dual touch.
I used the "SEARCH" of the forum, then the research, advanced research in a single post and then google but have found NOTHING download.
So kindly tell me where someone could possibly get it without having to read 76 pages to find it?
Thanks.
get the sdkcert at www.cinetsystems.com/xda
u can also use msigner
PointUI is now available WM2003 devices. Check it out:
What is PointUI
Download Here
Read Forum
just installed it.
seems great! a completely new interface to an old device.
This program is a revolution!! Literally!!
One hell of a giant leap for mankind I say!!
It will certainly make the iPhone take a run for its money..
thanks for the link btw..
where is the download link? I can't see it on my screen.
do we have to register to the forum for download?
whilst this isnt an iphone killer application, it still transforms my tired old o2 into a new device.
it has some very cool features. gone are the days of the stylus - you dont need it.
however in saying that there are still a few bugs to sort out. but honestly people, i would recommend everyone trying it out.
PointUI doesn#t work on ROM 2.03TX?!?
Hi everyone!
I have Taxist´s ROM 2.03 TX installed on my Magician. I downloaded Home Point UI, couldn´t install it from PC, put it in the Storage of my machine, but it doesn´t work! What is my mistake? Or have i to load another program (without "Home" in the title=? And if, where do i find a download link? Many questions at one time, i know, but Please help me!!! Thank you !
hubie53, try it tomorrow out. It won't run on 29.Feb. )
BTW, i get GPRS-connection problem in PointUI.. it cannot connect... is it only by me?
xda2mid said:
where is the download link? I can't see it on my screen.
do we have to register to the forum for download?
Click to expand...
Click to collapse
Read the first post on PointUI forum
"Ok, so you can download the file by clicking the letter "a" at the end of this sentence, which was a way to try and force people to read the statement above because we know you won't and just download the file anyhow."
PointUI and ROM 2.03
I installed it (on march,1st ) in the main storage of my device, and it works! I think it´s the place, not the date
And how it works whith russian lang ?
ps Sorry about my english
link not working
pexu85 said:
PointUI is now available WM2003 devices. Check it out:
What is PointUI
Download Here
Read Forum
Click to expand...
Click to collapse
hi there!i tried downloading from the link you posted but the file is either corrupt or empty.could post another working link.thanks again...
Here it is!
thanks a lot, Ive been trying to find this!
Hi!
Works fine with my WWE 2.03 TX ROM. Only some texts like the date are crapped because they are displayed in russian language by the pda.
Edit: Solved by editing the regional settings!
Greetz, Mike.
how to install?
SuTuRa said:
Here it is!
Click to expand...
Click to collapse
hey thanks for posting the link again.i was able to download it but when i extracted the file in my pc and tried to install it, it says "not a valid win32 application".can you pls tell me what am i doing wrong? thanks! i really need this....
You have to copy the folder to your pda device. The application can be started there.
Greetz, Mike.
thanks.....
crassmike said:
You have to copy the folder to your pda device. The application can be started there.
Greetz, Mike.
Click to expand...
Click to collapse
hey thanks you guys,really appreciate this. i read the forum FAQ's and got through!!!
Theres a new version available, 1.51. But I think it´s only for wm 5/6
It seems they're changing their web pages. Looks like more aiming on commercial products. After all I hope they will continue developing the Home application for free and WIN2003 PPC compatible.
Greetz, Mike.
SuTuRa said:
Theres a new version available, 1.51. But I think it´s only for wm 5/6
Click to expand...
Click to collapse
v1.51a
Notes
Update Manager removed from install. Normal application uninstall should now work.
what skin is going to work on my p3600 :manila or tuchflow or 2d skins...?
danilo01 said:
what skin is going to work on my p3600 :manila or tuchflow or 2d skins...?
Click to expand...
Click to collapse
All three of these refer to the same thing.
First you need to learn how to flash a ROM (do a search).
Next, flash a custom Manila2d ROM
Next, download some themes (skins)
Next, use m2dc customizer to install the themes.
There are threads in xda which explain in great detail how to do all this, just use the search facility.
Good luck,
Mattster.
some examples
is there a different types of themes for different roms or the wm6.1 parameter for search is ok?
dont know how to be positiv that i am downloading the right thing
can p3600 stand tuchflou (rotating box meny)?
I AM REEDiNG AND HOPE ILL LEARN SOMETHING....THANKS FOR HEALPING
danilo01 said:
is there a different types of themes for different roms or the wm6.1 parameter for search is ok?
dont know how to be positiv that i am downloading the right thing
can p3600 stand tuchflou (rotating box meny)?
I AM REEDiNG AND HOPE ILL LEARN SOMETHING....THANKS FOR HEALPING
Click to expand...
Click to collapse
The 6.1 ROMs work fine on all Trinities. That is why they are in the Trinity section of the forum. Some download versions are specific for the p3600i. The first post of any ROM thread will indicate everything you need to know. Some have Manila2d (skinnable), some have FtouchFlo (finger gestures to scroll screen), some have both.
Mattster.
ok
ok thanks!
and for the last am I going to heve tis in new rom or need to download it?
and what intresting rom you are suggesting to me?
danilo01 said:
ok thanks!
and for the last am I going to heve tis in new rom or need to download it?
and what intresting rom you are suggesting to me?
Click to expand...
Click to collapse
Just read through the latest ROMS, see what they have, read the comments, then choose one you like.
Just make sure you follow the important steps on how to flash.
There is a useful step by step guide at this link. Follow it word for word in the order it says and you should be able to get it done. Remember to start at the beginning. If you have nothing important on your current device to back up, then you can start at STEP 2: "Upgrade to Hard SPL"
http://trinityguides.info/index.php?...d=25&Itemid=66
Best of luck,
Mattster.
p.s. Moderators do not approve of newcomers starting new threads on information that is already out there. If you have specific problems, look for an answer in the search button, or ask them here in in Trinity Upgrading:
http://forum.xda-developers.com/forumdisplay.php?f=312
Thanks allot
FROM NEXT WEEKK I AM GOING TO ACTION
till then I ma going to lear and reed as nutch as possible....thanks
Hello,
i wondered wether i need to be a computer genius to cook my own rom. On all the roms you get tons of apps, and I want to make one with as good as no extra apps (just some basic ones like youtube and opera). I downloaded the ervius kitchen, but what do i need to start? Do i have to download a sort of 'master rom' in which you can disable things you dont want?
Thanks in advance,
Kapie
Im watching the youtube tutorial by lion75y, and i need the stock rom. I bought my device second handed, and i am not able to download it from the HTC homepage. Is the blackstone stock rom available somewhere else? I've searched around on the forums, but i couldnt find it...
Kapie said:
Im watching the youtube tutorial by lion75y, and i need the stock rom. I bought my device second handed, and i am not able to download it from the HTC homepage. Is the blackstone stock rom available somewhere else? I've searched around on the forums, but i couldnt find it...
Click to expand...
Click to collapse
Have you tried the wiki mate
Fallen Spartan said:
Have you tried the wiki mate
Click to expand...
Click to collapse
i have radio 1.17 on my device. any rom with 1.14 or higher works right?
Kapie said:
Hello,
i wondered wether i need to be a computer genius to cook my own rom. On all the roms you get tons of apps, and I want to make one with as good as no extra apps (just some basic ones like youtube and opera). I downloaded the ervius kitchen, but what do i need to start? Do i have to download a sort of 'master rom' in which you can disable things you dont want?
Thanks in advance,
Kapie
Click to expand...
Click to collapse
To be honest mate there is plenty of guides or kitchens to help you. Try typing in "kitchen" or "cooking" into the search and see what threads appear
Also, this may be a good place to start
Fallen Spartan said:
To be honest mate there is plenty of guides or kitchens to help you. Try typing in "kitchen" or "cooking" into the search and see what threads appear
Also, this may be a good place to start
Click to expand...
Click to collapse
thanks, will check it out
now i've updated the windows build in my ervius kitchen, but where can i find the manila (2.5) files? ive been searching and i only found a thread with information about them, but not the actual files. I am looking for this one:
2.5.2018 Rodhium Manila 2.5
I found it on this thread:
http://forum.xda-developers.com/showthread.php?t=569715