Database Users

HELP Netcf 3.5 Installation failed

Hello,
i have a massive problem with my htc hd2. In order to use bsb tweaks 1.6 and other software i need netcf 3.5. The problem ist, that every time i try to install netcf3.5 wether via .cab or active sync using the pc programm it says "installation failed". When i install BSB Tewaks it installs and says that it can´t run with that version of netcf. Obviuously there seems to be an older version installed which hinders the new one from installing. This problem occurs even after rom update and hard reset. I ran out of idears and am totally despaired.
If someone can help me with that i´d be more than thankfull because i tryied everythin from sk tools cleaning registry after rom installation to taking out the memory card and Sim card and so on..
HELP PLEASE (

Lovrock said:
Hello,
i have a massive problem with my htc hd2. In order to use bsb tweaks 1.6 and other software i need netcf 3.5. The problem ist, that every time i try to install netcf3.5 wether via .cab or active sync using the pc programm it says "installation failed". When i install BSB Tewaks it installs and says that it can´t run with that version of netcf. Obviuously there seems to be an older version installed which hinders the new one from installing. This problem occurs even after rom update and hard reset. I ran out of idears and am totally despaired.
If someone can help me with that i´d be more than thankfull because i tryied everythin from sk tools cleaning registry after rom installation to taking out the memory card and Sim card and so on..
HELP PLEASE (
Click to expand...
Click to collapse
you have to use a reg editor to enable the 3.5. HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
see if this helps

**** turpin said:
you have to use a reg editor to enable the 3.5. HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
see if this helps
Click to expand...
Click to collapse
That is for software that was installed on the phone prior to .Net 3.5. It has nothing to do with installing 3.5.
If you can bare it, I'd suggest a hard reset and then try to install it. It should install without issue, as it has for everyone else as I've never seen this problem.
There could be a conflict with something that you've already installed on the phone, but it certainly won't be with an earlier version of .Net. You can (and indeed need to) have different versions of .Net working on the phone.
Let us know how you get on.

johncmolyneux said:
That is for software that was installed on the phone prior to .Net 3.5. It has nothing to do with installing 3.5.
If you can bare it, I'd suggest a hard reset and then try to install it. It should install without issue, as it has for everyone else as I've never seen this problem.
There could be a conflict with something that you've already installed on the phone, but it certainly won't be with an earlier version of .Net. You can (and indeed need to) have different versions of .Net working on the phone.
Let us know how you get on.
Click to expand...
Click to collapse
I performed a hardreset first via Software "1234" then via buttons (volup/down) but every time i try to install it, it says "Microsoft.NET CE 3.5CAB failed" and thats it....
What can i do ? It actually has worked at a certain point but after some hardresets it just doesnt install anymore (

Have you tried a different download? It may be that the installation you downloaded is corrupted. Also, if you're copying it to your SD card and installing from there, that could be damaged, so try it from the device.
Other than that, I really don't know what to suggest. I take it you've googled the error message you get. What did that give you?

Netcf3.5.9198
When I tried to install NETCF3.5 it told me I had a newer version already installed, so I didn't install it. Later I checked my registry and found that I have version 3.5.9198 installed. Does anyone know if BsB Tweaks will work with this version? (EDIT) Well, I tried BSB Tweaks and it seems to work ok with my version of NETCF3.5.
When I tried pinch to zoom on Opera 10, it worked, but also gave a small popup showing the image of the full screen centered on the lower center part of the screen. When ever you double tap to go back to full screen, the little popup disappears. ????

Can't install some software - Please help me *SOLVED*

I didn't experience such a behavior on any of my HTC devices before... It is driving me nuts!
I flashed three Custom ROMs till now (Anjas back to the root 05.01., Artemis GER 13.01., HD2O 1.4) - same effect!
While installing some (not all!) programs I get an error (installation failed) and this error comes before you have to select the destination.
I'm not able to install
- MaxManila 2.7/2.8
- Artemis_TaskBar_Bat_Green_Icons
- BsB Tweaks 1.6 (whether cooked in or not)
- Digicast Solutions' Shopping Cart v 5.2
- Opera Mobile 10 beta
But I'm able to install
- HTC Network Plugin
- MorphGear 2.4
- TourchButton v 2.2
- White_FInixNOverBattery
Does anyone have a similar problem or does anyone know how to solve it? It is really really annoying

And: Of course I have made already several Hardresets...

Try an official ROM.

i just installed official HTC GER 1.48... same issue...
i don't know what else to do...

as you have the problem on all the roms it might be that the cabs of the programs you are trying to install are corrupted.
i've had that once and had to format the memory card.
empty memory card, format and replace all the programs that did not install with a new download or copy from your pc
that solved it for me then.

YOU ARE MY HERO!!!
As I read your post I realized that i've downloaded all those files with Opera Mobile. And all these files are corrupted...
I'm such a fool!
THANK YOU MATE!

I have the same problem. Cabs downloaded with Opera are corrupted, cabs downloaded with IE are fine. So there must be a problem with Opera Mobile.

unable to install... Please HELP!

Hi,
I use the 1.66 German ROM from the htc homepage, .NETCF V3.5 is installed and the registry is set to 3.5 instead of .NET 2.0 and there are a lot of applications I found in this forum that cannot be installed.
These are for example:
BsB Tweaks 1.6
Race Chrono
and so on...
Others like Icon changer create error messages (.NET 3.5) during execution ( Icon changer crashes when loading a theme).
Actually I don´t know what to do and where the problem is.
P.S. Maybe one of you guys could state a working download link for .NET 3.5 - maybe my file is a little corrupted???

This not work?
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
When you install it have your HD2 connected via ActiveSync/WMDC and it will ask you to download on your phone as well...

no it doesn't :-(

[Q] "Application not signed" after unsuccessful run of Android

I am running my HD2 on the stock ROM: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe with SPL 3.03 (Stock, not HSPL). I read carefully instructions, and followed all steps, I am not going to describe them, used following Android build [30.11.2010] MDJ FroYo HD v. 4.0 [Kernel: MDJ S7.3HD].
After Haret.exe HD2 reseted, and there was only white screen with HTC logo quite a while. I soft reseted the phone, and after that reset almost all programs are unable to start, with following message: "The file ‘cecmd’cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found". It does not mean where are they installed, SD card or Phone storage. But not all of them, e.g. Opera 10 still runs. It also refuses to install new programs, installation process immediately ends, with "Installation was unsuccessful" ((
I digged the forum, and somewhere it was proposed to change registry value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1
But I can not do so: I can not run the registry editor, which I have on my HD2 (Total Commander), I can not install new, or install a tweak, and also when trying to edit registry from my PC through activesync connection with CE Registry Editor and Mobile registry editor it returns with error "access denied".
I do not want to make hard reset. I think there should be a solution, other than HR or flashing new cooked ROM.
Thank you in advance.
Uta

uta77 said:
I am running my HD2 on the stock ROM: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe with SPL 3.03 (Stock, not HSPL). I read carefully instructions, and followed all steps, I am not going to describe them, used following Android build [30.11.2010] MDJ FroYo HD v. 4.0 [Kernel: MDJ S7.3HD].
After Haret.exe HD2 reseted, and there was only white screen with HTC logo quite a while. I soft reseted the phone, and after that reset almost all programs are unable to start, with following message: "The file ‘cecmd’cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found". It does not mean where are they installed, SD card or Phone storage. But not all of them, e.g. Opera 10 still runs. It also refuses to install new programs, installation process immediately ends, with "Installation was unsuccessful" ((
I digged the forum, and somewhere it was proposed to change registry value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1
But I can not do so: I can not run the registry editor, which I have on my HD2 (Total Commander), I can not install new, or install a tweak, and also when trying to edit registry from my PC through activesync connection with CE Registry Editor and Mobile registry editor it returns with error "access denied".
I do not want to make hard reset. I think there should be a solution, other than HR or flashing new cooked ROM.
Thank you in advance.
Uta
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort

I can confirm this is working! Thank you very much!
After using Android MCCM HD 4.0 http://forum.xda-developers.com/showthread.php?t=954030 i was unable to launch any unsigned WiMo application including haret, total commander, sktools and any registry editor!
schnurzelat

Thanks!
@uta77 : Thanks! Yours was the only solution that worked!
Actually, just running SDA_ApplicationUnlock.exe was enough for me to get CeRegEdit to change the registry - after changing policy 0000101a to 1, all apps started working again!

thanks uta77
uta77
thank you really much! i was all evening arguing with myself to avoid an hard reset. and you solved my problem.

Big Thanks!
I had to make all your suggested changes before it worked but saved me from a hard reset!

TF3D config won't work on HTC Touch diamond

Hello guys,
i'm having problems to run the aplication tf3d congif, it gives me this error:
"ERROR: An unexpected error has occurred in Diamond TF3D Config.exe.
Select Quit and then restart this program, or select Details for more information.
I've deleted the .xml opera file in tool directory, nothing, i've looked up for registry in HKLM \ Drivers \ TouchPanel and there was DWORD.
What else could i possibly do???
Please help me out guys.
Thanks.

Anyone please?
Begging you
Im using 2.11.Gen.Y WWE Rom
wm 6.1 proffessional
CE OS 5.2.21056 (Build 21056.1.6.9)
Please help...
It gives me large detailed unexcpected error
(NotSupportedException) and then large text of parse errors, i really hope you could help me, thanks in advance.

I think TF3D.config is made for older OS-versions, you should search for Advanced Config...

I have installed Advanced Config, but it only disables, enables and change values of certain things, i need to change theme, tf3d config does that stuff, but i just can't make it work.

also me
i've same problem. wm 6.5 manila. i tried to cancel tweaks file but nothing.