Screen lock: slide = yes.. but security code = NO - HD2 General

Hi - got an issue with Screen Lock - as in different than both my Diamond 6.1 ROM and custom 6.5 ROM..
My devices are setup to sync with an Exchange 2007 server, and which enforces a device lock policy (5 mins). I also have the devices setup to dim their back-light off after 30 seconds and turn the screen off completely after 1 minute.
On the HD2 every time the screen is switched off, be it either via the button or after the 1 min timeout, whenever I resume (even if straight away) I have to both do the swipe-to-unlock and enter my unlock pin code. Whereas on the other devices whether or not I have to enter the pin code is dependant on whether or not the 5 minute lock policy has elapsed.
For example, I might be actively working with a device over a period of 20 minutes. During this time the screen might switch off a number of times, but because I switch it on again <5 mins later then no pin unlock required. However with the HD2 it has to be entered EVERY time - a real pain.
Any ideas?
Thanks in advance.

[BUMP]
Seems this issue gets more involved when moving to 1.48 ROMS!
To summarize, I'm after decoupling the native auto slide-to-unlock functionality from the security code entry. I like the fact the slide-to-unlock is engaged every time the screen is turned off then back on again, however want the security code entry to honour the selected timeout period (so as if the device is turned back on again within that period you only have to slide-to-unlock and not enter the security code).
Surely I'm not alone here..

Definitely annoying
This is definitely the most annoying "feature" of the HD2. Some customization for the logon screen (slide only, slide and pin, slide and pin after timeout period, pin only) would be very welcome.
So a thumbs up / vote for any solution to this.
I have tried the Disable Auto Device Lock.cab from this site, but that breaks all locks and I had several "automatic calls" + high battery drain because of pocket clicks. So I did a hard reset to get rid of this setting.

Related

Looking for lock program that only activates when resuming from standby

I know the thread title says enough but I'm going to elaborate on what I am looking for.
I am looking for a looking for a lock program with password protection similar to the one that comes on our Wizards, but without the timed lock. I want it to only lock my device when it is turned back on from sleep mode and no other time. Basically I only want to have to type a password in when the screen is turned back on and not again until I turn the screen back on again.
Does anyone know of a program with this kind of functionality? I really need this because unfortunately, I still live with my parent and my Mom likes to go through my phone and look at all my personal data like call logs and SMS. It's become a nuisance and I really want to do something about it.
Thanks in advance guys.
Dan.
What's wrong with the time out one? I think if you were to do a 0 seconds of the built in password thingy, you can have it ask for a password every time you switch it on.
The built in one will only ask you password if your phone is not used for a certain period of time. the time out function is basically from the backlight and battery time out, nothing to do with the passwor.d
hanmin said:
What's wrong with the time out one? I think if you were to do a 0 seconds of the built in password thingy, you can have it ask for a password every time you switch it on.
The built in one will only ask you password if your phone is not used for a certain period of time. the time out function is basically from the backlight and battery time out, nothing to do with the passwor.d
Click to expand...
Click to collapse
Well the problem with the built in lock function is that it will lock the phone after so many seconds even if the backlight is still on and it gets annoying when I'm doing something but get sidetracked for a few seconds and then come back and have to type in the code to unlock it again, even though it never left my hand in the first place. I'll play with it a bit and see what can be done with it but from what I have seen so far, I don't really like it.
I'm pretty sure it is based on you switching off (suspend) the phone or the phone switch (suspend) off itself, because the option is "0 minutes". It can't have the phone locked after it us unused for 0 minutes.
hanmin said:
I'm pretty sure it is based on you switching off (suspend) the phone or the phone switch (suspend) off itself, because the option is "0 minutes". It can't have the phone locked after it us unused for 0 minutes.
Click to expand...
Click to collapse
Heh... It worked. Thanks. If I set the backlight and power options to never turn off display then it will never lock the device but once I press the power button to turn off the screen then it automatically locks the device so that you have to type in the password before you can resume playing around with the phone.
Thanks again. I had never tried that option before.
Dan.

Remove phone lock with .cab file?

My company enforces the phone lock every time I sync my emails with the Exchange server. The problem is that I'm not able to turn this off again from the menus.
This is a bit irritating especially when I use the phone in the car for navigation purposes, GPS tracking or GeoCashing as the screen turns off every 5 minutes and the phone lock turns on. Typing the pin code while driving is not very safe
I wonder if someone can make a .cab file that can deactivate the phone lock?
Yes, I know it will be turned on again next time I sync but that is okay.
Remove Phone Lock
UNLOCK DEVICE:
First enable the box again to untick it:
HKLM\Security\Policies\00001023
0 = Enabled; 1 = Disabled
Most Time it works, if not there is a other issue
Install Zenyee.com Stay Unlock.cab and soft reset your device.
This program will prevent the lock to be activated again.
But you have to make a softreset after starting the programm, and I get every time an error, but it works, also after sync with the exchange server ...
More about this fix:
http://forum.xda-developers.com/showthread.php?t=358695

Lock screen won't stay set

My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
It actually is staying what you set it at.
Samsung as usual has set up some stupid defaults for this phone.
Go here and set it to Instantly and it will work as you expect.
Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out
With those settings every time you unlock your phone you will need whatever security you set.
With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung...
As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process.
I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process.
If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
Milimbar said:
It actually is staying what you set it at.
Samsung as usual has set up some stupid defaults for this phone.
Go here and set it to Instantly and it will work as you expect.
Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out
With those settings every time you unlock your phone you will need whatever security you set.
With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung...
As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process.
I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process.
If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
Click to expand...
Click to collapse
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
tyoder87 said:
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
Click to expand...
Click to collapse
In that case I do not know.
You could try a factory reset, but I do not know if that will help.
If mine did that I would be returning it for a replacement.
Also make sure settings/lock screen/secure lock/smart lock isn't set to anything that's trusted.
Smart lock leaves the phone in swipe unlock if it recognizes your phone is at your home..or hook up to your Bluetooth, etc.
tyoder87 said:
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
Click to expand...
Click to collapse
So after digging around some more, I found out what was happening. I have a Moto 360 paired to my phone. I had it as a trusted device and that's what was allowing me to do swipe while still having the lock screen set to something else. However, my fingerprint reader is still acting up. It's still not even trying to read my fingerprints.
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
Go to settings and search smart lock... It shows that if you ate home the screen stays unlock but if u leave anywhere it'll lock..you can turn the location off when. You get into smart lock
The same thing is happening with mine (SM-G935A AT&T). However, when I go to the secure lock settings, it keeps changing from lock instantly to the maximum setting (which shows as 34 minutes and 7 seconds). Smart Lock has been completely disabled by system administrator (I get my corporate email on my phone). Every time I go in and change the secure lock to instant, it reverts back within the next 30 minutes.
[email protected] said:
The same thing is happening with mine (SM-G935A AT&T). However, when I go to the secure lock settings, it keeps changing from lock instantly to the maximum setting (which shows as 34 minutes and 7 seconds). Smart Lock has been completely disabled by system administrator (I get my corporate email on my phone). Every time I go in and change the secure lock to instant, it reverts back within the next 30 minutes.
Click to expand...
Click to collapse
Mine is doing the same thing automatically changes to 34 min and 7 seconds secured lock time without me changing it from instantly w power key so frustrating
[email protected] said:
Mine is doing the same thing automatically changes to 34 min and 7 seconds secured lock time without me changing it from instantly w power key so frustrating
Click to expand...
Click to collapse
If you don't mind me asking, what device administrators do you have setup? Currently I have my company exchange policy, Lookout Mobile, AT&T Protect Plus and Android as registered administrators. I'm starting to wonder if its the combination of services like maybe the Protect Plus and Lookout.
[email protected] said:
If you don't mind me asking, what device administrators do you have setup? Currently I have my company exchange policy, Lookout Mobile, AT&T Protect Plus and Android as registered administrators. I'm starting to wonder if its the combination of services like maybe the Protect Plus and Lookout.
Click to expand...
Click to collapse
Hi! Lookout, email and Android device manager are all administrators I think in personal settings
[email protected] said:
Hi! Lookout, email and Android device manager are all administrators I think in personal settings
Click to expand...
Click to collapse
I figured out the issue, at least for me. First I tried to disable both Lookout and ATT Protect Plus as device administrators but still the lock setting would revert to 34 minutes and 7 seconds. In my account settings for my corporate email, there was a link for all security policies. Sure enough, the screen lock policy showed as 2047 seconds which translates to 34 minutes and 7 seconds. I cannot change the option as that is the corporate policy set by the server.
This is an issue with Samsung s7 including the edge. Mine was playing up from the day I got it. I took it into carphone warehouse assuming it was a setting and the guy serving me basically said to send it back. I eventually got a refund from Samsung (it was painful) and then I stupidly bought another one of these overpriced, over hyped pieces of **** from John Lewis instead. I've always used windows (mobile (i.e. what I'd call old android and what XDA was made for) and then windows phone and briefly windows 10 mobile. From my short experience of using the so called best android phone I have to say gimmicks aside, the features both phones share, windows destroys android, emails, documents, ease of use, fluidity, user experience....oh and a working lock screen. Not happy and it's my own fault, I fell for mass marketing and believing the hype.
I think I found the answer
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
If you have a device like a Bluetooth paired with your s7 edge, make sure that smart lock isn't on. Once I changed that that setting, it stays locked.
Can you describe how to find this page (that showed 2047 seconds)? I want to see if my company IT will change this.
Hi I have s7 edge, here's the problem is I cannot touch the screen, already do hard reset and rebooting still the screen cannot touch. I could not unlock my s7 edge.
Thanks for the help
Originally Posted by Milimbar It actually is staying what you set it at. Samsung as usual has set up some stupid defaults for this phone. Go here and set it to Instantly and it will work as you expect. Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out With those settings every time you unlock your phone you will need whatever security you set. With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung... As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process. I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process. If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
From:shawnthall15
Thank you for the tip it really helped me fix the lock on my new samsung galaxy amp prime!!!!
Restart your phone
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
I made sure i made my password effective immediately (it was set to 5 seconds) after you lock your phone and it didn't work.
Then I realized that I didn't restart my phone yet.
Lock screen was effective immediately after I restarted my phone. Solved my case!
Fixed
Its quite simple, it is smart as samsung has made s7/edge to recognize you and let your phone stay unlock whenever it is around you. Once, it has been unclocked by you, you dont have to set in the passcode each time to look at your phone. But dont worry, it will revert back to lock mode once it noticed that you'v set it aside on a surface i.e leaving it. Should you want to make your phone locked at all time whenever you want it, simply change the setting as follows: Setting > Lock screen and security > Secure lock settings > Smart lock > (enter your pin) > On-body detection > set it to off. Whallaaa!! Problem solved.
---------- Post added at 06:01 AM ---------- Previous post was at 05:55 AM ----------
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
Its quite simple, it is smart as samsung has made s7/edge to recognize you and let your phone stay unlock whenever it is around you. Once, it has been unclocked by you, you dont have to set in the passcode each time. But dont worry, it will revert back to lock mode once it noticed that you'v set it aside on a surface i.e leaving it. Should you want to make your phone locked at all time whenever you want it, simply change the setting as follows: Setting > Lock screen and security > Secure lock settings > Smart lock > (enter your pin) > On-body detection > set it to off. Whallaaa!! Problem solved.
Go to settings/lock screen and security/other security settings/trust agents and turn off Google Smart lock option.
You are back to instant phone lock.
Cheers🖒

S7 Edge Lock Screen issue, wont unlock

I bought two Galaxy S7 Edge phones recently and have noticed this issue on both phones now. Both are also updated to the latest firmware. Both of us have fingerprints set up and a pattern backup. So far, the issue has occurred to us both twice. I happen to always use my fingerprint to unlock and she always uses pattern out of habit from a past phone. She brought it to me a couple of days ago and said her phone says to wait 60 minutes and try again. I asked how many times she entered it wrong, because of course I thought she entered it wrong. She said she didn't enter it incorrectly. I asked if she tried to reboot, of course not. Anyways, I held on to it and after 60 minutes I entered the pattern to unlock her phone and sure enough it wouldn't work. I rebooted, and tried again and it worked. OK...Weird.
The very next day, it happened on my phone. I always use my fingerprint though so it told me no match found. Say what? Tried again. Same thing. OK, swipe and tried my pattern. It says its incorrect and to try again in 30 seconds. 30 seconds later, I tried again and it locked me out for 60 seconds. This time I rebooted, and after it was done and 60 seconds had passed my pattern was working again.
I don't get why it randomly seems to not recognize that we are putting in the correct pattern or fingerprint. I am however happy that a reboot seems to resolve the issue. Is no one else experiencing this?
Mine doesn't lock instead!
So I tried couple of things. Rebooted, re-initialized Finger Prints and even pattern. Now matter what I do, it won't lock the phone. It will just unlock without asking for passcode, pattern, password or fingerprint. Only option I can think of is to restore the phone and try setting up lock option but that's pain in the a**!! I tried third party apps as to lock screen but none of them have the fingerprint unlock option! And some have ads and weird setup which worked... Gettting frustrating. Perhaps I should try restoring phone if there's no other option left
shunail said:
So I tried couple of things. Rebooted, re-initialized Finger Prints and even pattern. Now matter what I do, it won't lock the phone. It will just unlock without asking for passcode, pattern, password or fingerprint. Only option I can think of is to restore the phone and try setting up lock option but that's pain in the a**!! I tried third party apps as to lock screen but none of them have the fingerprint unlock option! And some have ads and weird setup which worked... Gettting frustrating. Perhaps I should try restoring phone if there's no other option left
Click to expand...
Click to collapse
Entirely different. I'm not sure this is actually an issue as much as it is probably settings. Go to settings, Lock screen and security, Secure lock settings. Check how long Lock automatically is set for (mine is for 5 seconds after the screen turns off automatically and that is set for 2 minutes.). Then turn on lock instantly with power key. Go to smart lock and see if that's being used. IF it is it would keep your phone unlocked when its connected via Bluetooth to a device you told it to trust, or when you are at a trusted place via google maps (such as home or work), or it could simply know your voice, or lastly if it senses that it is on your body (I don't get this one. Seems very insecure, like anyone could pick it up and it would just unlock.). Good luck!
Viper41086 said:
Entirely different. I'm not sure this is actually an issue as much as it is probably settings. Go to settings, Lock screen and security, Secure lock settings. Check how long Lock automatically is set for (mine is for 5 seconds after the screen turns off automatically and that is set for 2 minutes.). Then turn on lock instantly with power key. Go to smart lock and see if that's being used. IF it is it would keep your phone unlocked when its connected via Bluetooth to a device you told it to trust, or when you are at a trusted place via google maps (such as home or work), or it could simply know your voice, or lastly if it senses that it is on your body (I don't get this one. Seems very insecure, like anyone could pick it up and it would just unlock.). Good luck!
Click to expand...
Click to collapse
Forgot to mention, have done all of that. First I had it set Lock Automatically to immediately and tried 5 seconds, 15 seconds to all the 30 minutes, still won't lock (over night till I wok up in the morning)
Smart Lock:
Trusted Device are my car and my watch, but even with bluetooth disabled (just to give it a shot) it still doesn't lock.
Trusted Place: my home, but even with Location Service (GPS) turned off, still won't lock
On body Detection = Off
Trusted Voice = Off
Tried updating phone perhaps something may fix it, nothing.
Tried Security Policy updates and that says ... updated to latest version...
Been using Android since good old HTC Evo days and had no issue with my (last) Note 4 locking with fingerprint!! I love this phone really expect for this issue. Oh yes and another issue, gestures won't work also!!! Tried hand gestures for screenshot, nothing. Smart Stay doesn't work also!!!
Is something wrong with this phone perhaps??
shunail said:
Forgot to mention, have done all of that. First I had it set Lock Automatically to immediately and tried 5 seconds, 15 seconds to all the 30 minutes, still won't lock (over night till I wok up in the morning)
Smart Lock:
Trusted Device are my car and my watch, but even with bluetooth disabled (just to give it a shot) it still doesn't lock.
Trusted Place: my home, but even with Location Service (GPS) turned off, still won't lock
On body Detection = Off
Trusted Voice = Off
Tried updating phone perhaps something may fix it, nothing.
Tried Security Policy updates and that says ... updated to latest version...
Been using Android since good old HTC Evo days and had no issue with my (last) Note 4 locking with fingerprint!! I love this phone really expect for this issue. Oh yes and another issue, gestures won't work also!!! Tried hand gestures for screenshot, nothing. Smart Stay doesn't work also!!!
Is something wrong with this phone perhaps??
Click to expand...
Click to collapse
Hmm.. Have you tried turning off Smart lock all together? Otherwise, all I can think is to factory reset settings before you factory reset the phone.
Factory Settings Reset did it
Factory Settings Reset did it however gestures and smart stay are still issues!! Then I courage myself to do Factory Phone Reset and dang the issue with the gestures persists!!
Bump.
No one else is having this issue? I just happened to be the only one with two new phones that do it?
This literally just happened to me! I was walking to a friend's house and was using the phone just fine - was using Facebook Messenger and Spotify. All of a sudden, I try to unlock it (I have a pattern to draw, not a code) and it doesn't work. I have no idea what's going on but I don't want to factory reset and lose all my contacts and pictures. I only have four tries left to unlock it before it automatically resets itself. I've tried using the Android Device Manager to set a temporary password but since there's already a pattern to draw it won't bypass the lock screen for some reason. I never thought to check the security settings on my phone (why would I if I had a lock screen on it?) so I can't use the Samsung equivalent either. I'm extremely frustrated - been looking for help for about an hour and I'm finding absolutely nothing. It's clearly been a problem before and yet there's no solutions or explanations as to why it's happening??
While I am still having this issue sparsely, I can get around it simply by rebooting. It's just annoying to have to do so.
It's anew feature of S7 called SMART LOCK, meaning your phone knows if you're in a safe place such as your Home, your Car or if you paired a smart watch with your phone and added it as trusted device, as long as you're connected to your watch, the phone knows you're in a safe place so you dont need to enter password to your phone. Or if youre in your car or at Home, then you wont need to enter password to open your phone. But if you want to remove this feature and want to swipe or enter your pin no matter where you are then do this..go to:
SETTING>LOCK SCREEN & SECURITY>SECURE LOCK SETTING>SMART LOCK. Here you'll see "Trusted Places" and "Trusted Device" Just edit or press and hold whatever is in there, e.i your watch, your home address etc...then remove and you should be good to go.
Have you tried turning off Smart lock all together? Otherwise, all I can think is to factory reset settings before you factory reset the phone.

Screen Timeout settings not working

Hi I've had the phone for about 3 months now and it's only in the last week that I noticed my screen timeout is not sticking. I set it to 1 minute but it always reverts back to 15 seconds. I enabled /disabled smart stay and in secure lock settings I set it to lock automatically when the screen is off instead of giving it the default 5 seconds.
Anyone has similar issues or suggestions please?
I'm having the same issue! Been looking online for over a month for solutions and have come up empty. It seems as though it isn't on Samsung's radar yet for it to be resolved with an Android update because the recent one didn't address the issue
JeremyMartinus said:
Hi I've had the phone for about 3 months now and it's only in the last week that I noticed my screen timeout is not sticking. I set it to 1 minute but it always reverts back to 15 seconds. I enabled /disabled smart stay and in secure lock settings I set it to lock automatically when the screen is off instead of giving it the default 5 seconds.
Anyone has similar issues or suggestions please?
Click to expand...
Click to collapse
I had this same issue and it was driving me nuts. However, I found a workaround that seems to be working. Change your screen time out to something else, like 2 minutes and press back until you're out of the settings. Then go back in and change it to 1 minute. For whatever reason, this fixed it for me

Categories

Resources