Hi, I am from Sweden and this is my first post here at XDA.
I got a HTC p3600, it´s upgraded to WM 6.5 and it works awesome.
Now the problem. The WLAN works great at home and other open networks/ if i got the key.
In my school we got WLAN but i can´t connect to it. I find it in the WLAN-list but there it ends. My friend with an Iphone just select the network and then he can insert his username and password, and woila! He´s in.
When i try to connect the server wants a "Certifikat" in swedish. I have tried to do a "Domain enroll" to get it But it always fail.
I think they use Windows Server 2003.
Does anybody understand my bad language? If you wanna know any more, just tell me.
Same problem here, trying for some weeks to find a solution and so far all attempts with different clients failed. I`m sure it`s not a windows server but a cisco concentrator that let`s You access wlan and it seems there is no free client that can communicate correctly with cisco hardware for winmobile. Iphones have a vpn client directly from cisco integrated and can pass without problems. Try to ask Your computer center what concentrator they use and if they know of a client that supports winmobile.
Some forums mention a registry hack that deactivates certificate authentication but just setting it didn`t help. We`re still trying if this might work in conjunction with a locally installed certificate. Try to get the root certificate of Your CA and import it to Your device. Might help. Somehow they screwed up PEAP on mobile clients cause it`s supposed to work without local certificates but alas...
FlyBy_1 said:
Same problem here, trying for some weeks to find a solution and so far all attempts with different clients failed. I`m sure it`s not a windows server but a cisco concentrator that let`s You access wlan and it seems there is no free client that can communicate correctly with cisco hardware for winmobile. Iphones have a vpn client directly from cisco integrated and can pass without problems. Try to ask Your computer center what concentrator they use and if they know of a client that supports winmobile.
Some forums mention a registry hack that deactivates certificate authentication but just setting it didn`t help. We`re still trying if this might work in conjunction with a locally installed certificate. Try to get the root certificate of Your CA and import it to Your device. Might help. Somehow they screwed up PEAP on mobile clients cause it`s supposed to work without local certificates but alas...
Click to expand...
Click to collapse
Thanks for the answer!
Would it be possible to to install some kind of program from cisco to make it work?
Unfortunately Cisco doesn`t do any winmo clients, they licensed it to other companies. Tried with Root CA yesterday but that didn`t work, maybe we need a valid client cert too. Have to get a personal one from our uni CA the days.
Try installing secureW2
http://www.securew2.com/node/3
This is a program specifically designed to work with wpa2 networks offered through a radius server. Most schools and universities use a radius server. You will need a local login and password though.
When installed, you can select securew2 in the certificate window of wifi settings, when you try to connect to the wireless network.
Thanks for the suggestion. I tried with various clients, none of them worked, securew2 was among them. But maybe it works with fiddyboy.
A page mentioned some older hardware may not cope with mixed wpa modes, maybe P3600 is among them but I really don`t think so...
MAsterokki said:
Try installing secureW2
http://www.securew2.com/node/3
This is a program specifically designed to work with wpa2 networks offered through a radius server. Most schools and universities use a radius server. You will need a local login and password though.
When installed, you can select securew2 in the certificate window of wifi settings, when you try to connect to the wireless network.
Click to expand...
Click to collapse
I am downloading now, will test it tomorrow. Thanks!
Edit: I am not getting it to work. Can someone help me with the settings?
I am sorry, but I don't know what settings to use in your specific case... These settings should be made available by your school or company, most of the time the settings for laptops will give enough information too
which rom do you use to upgrade to windows mobile 6.5
Finally got it to work. We have different WLANs here at our university. I had no luck connecting to our VPN-network so I tried our eduroam WLAN. Eduroam is a roaming network for educational purposes. If You have a login from Your uni/school/whatever You should be able to access the internet from any eduroam network worldwide.
As You said You were asked for a certificate I think Your network relies on the same technologies as ours because I had the same error before. Following explanation:
Our eduroam RADIUS server is certified.
This means our uni gave it a certificate. Our uni was certified by and got a certificate from the DFN (german research net). The DFN was certified by and got a certificate from the german Telekom.
This is called a certificate chain with the DFN as intermediary and Telekom as root certificate authority.
What I had to do is import just the root certificate (from Telekom) to my mobile device by downloading it from our unis webpage, transferring it to the Trinity and just click on it. It confirmed installation and the root ca is listed under the Settings>System>Certificates>Root.
Edit : Normal certs are with *.crt ending. MinMo wants *.cer-files. If You only can get Your hands on *.crt import them into Your PC browser, export from there with DER-encoding and rename *.der to *.cer. That`s it.
Our eduroam RADIUS server authentication is via PEAP.
So I configured the network connection like this:
connects to : internet
authentication : wpa2
data encryption : aes
eap type : PEAP
Connect. When prompted put in Your uni account credentials.
This worked on WinMo 6.1 and 6.5 Without the ValidateServerCert reghack or any other other special program.
WinMo5 failed! Also tried the ValidateServerCert reghack but it`s of no use. Think it`s because WM5 has no wpa2-aes support. If Your RADIUS allows wpa and tkip it may work.
Maybe if this doesn`t work Your server it uses something other than wpa2 or aes. Try different options. Maybe it`s not using PEAP. Ask Your admin but try with a certificate first.
The strange thing is that PEAP was used to avoid handling of certificates; it`s especially there to NOT have to fiddle with them. Anyway, this works here, hope this is the solution for Your location...
you should just buy a protable harddrive or a flash drive and transfer your files onto that and then onto your computer.
Hi, I have same problem, trying to use eduroam on CTU, my Notebook/Laptop WiFi work ok, but I can't connect with TD2 Topaz. I have instaled required certificate, but in options I have no way to set concrete RADIUS server to connect (which is required to be specified in settings on Notebook). Any ideas please? I Also installed securew2, but I can't add Cesnet CA in securew2 options, even it is installed in system (I is present in setings-certificates in WM).
When You have WinMo 6.1 You shouldn`t need securew2 and there is no need to explicitly set RADIUS IP. Have You tried eap-type : PEAP ? What`s the error message if any ?
Related
HI guys,
Does anyone know how to get a static IP address when using the GPRS connection to the internet. The reason being is because our corporate firewall has to recognise the device through it's IP. Is there any other possible methods for recognising the user?
Also does a VPN work well over GPRS and is there any extra configuration involved on the VPN server
Cheers
Any answers would be great.
Unfortunately there is no simple answer to your question. AFAIK you cant get a fixed ip on gprs, but if your using the right firewall and the right vpn host you dont need to.
I use and supply windows sbs 2003 servers and vpn into them regularly. I have also used citrix to achieve similar results. Might be a bit difficult to persuade your firms it dept to set up something like that for 1 person though.
PM me if youd like any advice.
BillyB said:
HI guys,
Does anyone know how to get a static IP address when using the GPRS connection to the internet. The reason being is because our corporate firewall has to recognise the device through it's IP. Is there any other possible methods for recognising the user?
Also does a VPN work well over GPRS and is there any extra configuration involved on the VPN server
Cheers
Any answers would be great.
Click to expand...
Click to collapse
Hello Billy,
You ask a good question, but the answer isn't simple. Most carriers do have two types of APN (Access Point Name) provision for your SIM: "private" APN (which provides a non-routable IP assignment from behind a NAT, for basic browsing and e-mail functionality) and "public" APN (that provides a routable IP assignment, which is the Minimum Requirement for a more sophisticated connection type, such as VPN, etc). However, both of them are assigned by a DHCP (Dynamic Host Configuration Protocol) Server on a GGSN (Gateway GPRS Support Node) of your particular GPRS network operator. In either case, the end result will obviously be a DYNAMIC IP address on your GPRS terminal (be it a laptop PC, a PDA, or phone)
Some carriers do offer what is called a "dedicated APN" provision, which gives the subscriber their own IP range to choose from (almost like a small subnet), but it is only available to corporate giants like Pepsi (for example).
Now, to sum it up, you must have the proper APN provisioned on your Mobile SIM account (which the provider will normally call something like a "VPN data package" in billing terms). Then, you must obviously establish a GPRS session before you can connect your VPN client (but remember that most basic VPN clients work the best). It is pretty sad to say, but Microsoft Windows-embedded VPN client on Win2k/XP Pro so far has performed the best with no quirks whatsoever. It has to be via PPTP...L2TP has also worked for me..otherwise, the fancier (and more secure) the VPN tunneling protocol, the more its likely to fail. Normally all you need for a basic MS WIndows VPN client config is the Server name (or IP address), the user name, and the password.
Hope this helps,
Let me know how it goes,
Alex
PS. PM me if you have further questions.
VPN and TS Its like pulling teeth
hi all this has got to be the most anoying problem ever. i can connect to O2 vpn access point and hence i can connect to my work vpn server. however as soon as i try to open a TS connection to my desktop (through the vpn) the VPN connection is dropped and i never connect. Can anybody tell me why? if i have a vpn connection to my work server why does TS try to make another connection and bomb out the original. Is there a fix or another way of doing this i.e. does a external IP have to be nat'd to my desktop IP on port 3389? all help greatly appreciated. Ian
While I was looking for a *working* VPN client solution to work with a Cisco concentrator, I found a couple of potential solutions:
1. Bluefire VPN client (http://www.bluefiresecurity.com/)
2. AnthaVPN (http://www.anthavpn.com/webmaker/portal/wmlink_360)
Both claim to work with the Cisco concentrator (3000 series to be precise). Before I go ahead and install either/both on my MDA Pro (with Imate ROM), I was wondering if anyone had any good/bad things to say about the software?
Any help would be appreciated.
here's an update:
I went ahead and installed the BlueFire VPN client. In general, the installation was a breeze. The UI is also nice and elegant. The configuration isn't too obtruse, either, except I can't get it to work with my Cisco concentrator! It would authenticate with the server fine, but would always choke on "IKE phase 2", which I think is when the client and server negotiate on the IPSec security association (SA) parameters.
I've tried several combination of IPSec configuration on both client and server to no avail. The server throws the following error on every login attempt:
39019 03/29/2006 14:04:59.840 SEV=4 IKE/0 RPT=575 192.168.51.120
Group [***obfuscated***] User [***obfuscated***]
All IPSec SA proposals found unacceptable!
Anyone got any suggestions on how to get around this?
rukna said:
here's an update:
I went ahead and installed the BlueFire VPN client. In general, the installation was a breeze. The UI is also nice and elegant. The configuration isn't too obtruse, either, except I can't get it to work with my Cisco concentrator! It would authenticate with the server fine, but would always choke on "IKE phase 2", which I think is when the client and server negotiate on the IPSec security association (SA) parameters.
I've tried several combination of IPSec configuration on both client and server to no avail. The server throws the following error on every login attempt:
39019 03/29/2006 14:04:59.840 SEV=4 IKE/0 RPT=575 192.168.51.120
Group [***obfuscated***] User [***obfuscated***]
All IPSec SA proposals found unacceptable!
Anyone got any suggestions on how to get around this?
Click to expand...
Click to collapse
Did you uncheck PFS (Perfect forward secrecy) flag ? I can connect with this flag unchecked and compression algorithm=none
rukna said:
here's an update:
I went ahead and installed the BlueFire VPN client. In general, the installation was a breeze. The UI is also nice and elegant. The configuration isn't too obtruse, either, except I can't get it to work with my Cisco concentrator! It would authenticate with the server fine, but would always choke on "IKE phase 2", which I think is when the client and server negotiate on the IPSec security association (SA) parameters.
I've tried several combination of IPSec configuration on both client and server to no avail. The server throws the following error on every login attempt:
39019 03/29/2006 14:04:59.840 SEV=4 IKE/0 RPT=575 192.168.51.120
Group [***obfuscated***] User [***obfuscated***]
All IPSec SA proposals found unacceptable!
Anyone got any suggestions on how to get around this?
Click to expand...
Click to collapse
Did you uncheck PFS (Perfect forward secrecy) flag ? I can connect with this flag unchecked and compression algorithm=none
Did you try the VPN client from APANI
There is a trial version for CISCO VPN 3000 Series for PDA and Mac
http://www.apani.com/vpnclients.html
italos said:
Did you uncheck PFS (Perfect forward secrecy) flag ? I can connect with this flag unchecked and compression algorithm=none
Click to expand...
Click to collapse
I tried that already, didn't work. It may just be issues with the configuration on the concentrator. I'm going to play with it this weekend to see if I get anywhere. Thanks for the reply, nonetheless.
pierrelp1 said:
Did you try the VPN client from APANI
There is a trial version for CISCO VPN 3000 Series for PDA and Mac
http://www.apani.com/vpnclients.html
Click to expand...
Click to collapse
I filled out an eval request yesterday with Apani and got the instructions to download the client this morning. I'll install it over the weekend to see if it works "out of the box". Thanks for the suggestion, dude!
It appears that Apani doesn't really support the universal. Got the following from one of their support reps. Back to the drawing board, I guess.
The Client does not support the use of Windows Mobile 5. We currently
support Windows Mobile 2003 only.
Sincerely,
Janet
Apani Networks
[email protected]
714-674-1700
Click to expand...
Click to collapse
Bluefire VPN
be careful when installing Bluefire... It is a mess if you install it on the SD card..
it's a nuisance to uninstall it... all advice i got from "Bluefire support" was to try a hard reset.... most helpfull
(apparently this problem is well explained in their "product documentation"... but no solution has been found.. yet
NCP Secure Entry Client works
Have a working environment against a CISCO-PIX with NCP
http://www.ncp.de/english/services/testsoftware/index_entry.html
=) Georg
I got the BlueFire client to work finally! I had to enable the PFS (Perfect Forward Secracy) on the concentrator along with the encryption set to 1024 bits on my group profile.
After I got past that, I got the DirectPush client to work with my exchange server! Now I can confidently say this phone has been worth it for me!
OpenVPN
FYI - I just came across this openVPN port for windows mobile and thought it might be of interest for some of you guys:
http://www.ziggurat29.com/OVPNPPCAlpha/OVPNPPCAlpha.htm
Its still in the alpha stage and is continually being worked on by the author, David G. Lemley, III
I am in the same boat - need to use IPsec VPN to connect to our corporate Exchange server.
I am testing BlueFire 2.3.0 client for more than a week now. Overall it is very good - it does its job done. But after running it extensively for a week I discovered several issues with it, mostly cosmetic, but they are really annoying. Especially, if you want to have Direct Push. Those issues are:
1. "Save credentials for auto-reauthentication" does not work - you have to enter your password every time you connect.
2. It does not reconnect on its own, if it looses the connection (i.e. EDGE/GPRS goes down temporarily)
3. Detection of disconnect is not very reliable - sometimes when you loose signal and GPRS connection wants to disconnect, it cannot do it because of VPN still thinks it is connected and prevents GPRS from reconnecting.
4. Extensive use of on-screen push-buttons instead of soft-keys. And soft-keys are mapped to rarely used functions, like About - poor interface design. It woldn't be so bad, if the VPN client was not requiring user interaction to reconnect and authenticate...
5. After several minutes of standby, it brings its window on top of Today screen, kinda like letting user know that he better check his tunnel/connection, because it could be already disconnected... In most cases it is not true, because the unit wakes half the way up every several minutes to check email or sent a heat-beat packet, which keeps connection up (this only applies to GPRS/EDGE connection and not WiFi, unfortunatelly). But sometimes the VPN tunnel becomes dead, and you have to click "Disconnect", "Connect" and enter your password again.
Ok, that is my impression about BlueFire VPN client. Now the question is - is there any better IPsec client for PPC (WM5), which allows you to have Direct Push email over IPsec all day long without your intervention to check the connection status and reconnect manually?
Thanks for your time.
Im also trying to connect to our corporate network using a vpn client.
with my laptop i usually do this with the cisco vpn client and a very simple configuration.
My target is doing the same with the universal.
I tried Bluefire VPN, and AnthaVPN.
Eventhough i tried a lot of times, i couldn't make a connection with bluefire
With Antha, the results were better. I could connect , but after installing it, wifi stop working, and the active sync, sometimes doesnt recognize the device ( i saw in this forum somebody with exactly the same problem).
Is there anybody that use Antha in Universal without problems?
I checked the official web of Antha, and universal is not supported.
Do you know any other vpn software that works with Cisco?
Thanks
I recently purchased a tmobile mda and was trying to access my campus's network. But when I logged on, the only page I could view was about downloading a vpn client for multiple os's (but no windows mobile) to use the network.
Is there a vpn client for windows mobile?
Any help would be great.
Thanks!
There's a built-in client that will handle L2TP and PPTP VPNs. If you go into Settings/Connections and click "Edit my VPN servers" you can configure the client for your VPN. It's worth a try.
Tried that, didn't work... I decided to ask my University about their network, they said it was a cisco 3000 or something... And also informed me that "to their knowledge" the windows mobile 5 built in client isn't compatible...
I then went to the College of computer science help desk to see if some peers could help me. They said someone had bought a $100 program to be able to connect to the concentrator but didn't know who made it or where to get it.
Does anyone know of such a thing? Or a cheaper alternative?
AnthaVPN
I have found AnthaVPN wich is about from 40$ to 100$ depending what you need.
I'm trying also to open VPN without this IMHO too expensive solution. But if it's the only way - then I need to buy....
Maybe some kind of tunneling from own Linux-server (With Swan) might be the free solution....
I have been testing Bluefire Security's VPN and it works great, but my employer is using a Nortel system sio I cannot comment on the Cisco compatibility. It costs $79. I have also tries Antha but is cause problems enabling Wifi and Gprs.
John
Long time I could’t make connection with the built-in VPN client. After the latest ROM update from Qtek it works (I tested only PPTP). I can make VPN to SBS server and Windows XP. Also I can use Terminal Services true VPN connection.
The only thing I can’t get working is to access network shares (I tried GSFinder+ and NetUse).
Guka
hey guys,
am trying to connect to my office's VPN with my vario II. the default software provided does not seem sufficient. for one, i have one of those security key ring things which means my password changes every time i want to connect.
my pc uses cisco's vpn client...
any ideas? right now i'm just synching my exchange server with my pda using activesync, but wouldnt' midn having it on the go! there's no "external" access as such for the exchange server - it does have a web front end but its highly customized and isn't as easy as just configuring it as an external data source on my pda...
This one works perfect for me..
http://www.ncp.de/english/download/testsoftware/index.html
We use AnthaVPN at my university and it's supposed to work quite well with Cisco concentrator gateways, but be warned, if you have the latest 3.3 aku, you might run into problems like I did regarding loosing 3g internet connectivity on your hermes. However it could have just been a fluke as I didn't bother trying a fresh install of antha after a hard reset or anything since 3g is just as fast as my universities wireless internet anyways
Hope this helps
You can also try Bluefire. They have a 30 day fully functional trial version.
Find out more Here
Applestar said:
http://www.ncp.de/english/download/testsoftware/index.html
Click to expand...
Click to collapse
I have installed this but can't see any way of configuring the VPN connection. How did you configure it?
You have to use the PC client in order to create a configuration file and then transfer the file to your device
duh!
thanks!
bluefire is amazing. i bought it.
I came close to getting bluefire to work on our Cisco network... But once connected it would not transfer data.
I read on a seperate post here that alledgely the medianet unlimited plan uses the wap.cingular access point. That point is NAT based and some vpn clients do not like that... So they refuse the connection based on changing ip addresses.
I am not a networking expert so I do not know if this is in fact the case.
I do know I tried every freakin setting for bluefile and could not get a vpn tunnel from my phone to our Cisco vpn... So I gave up!
NCP
Could I get more specific infos about bluefire? They wanted a 5 page survey before they would send me a (business) trial.
Well, NCP Secure Entry VPN Client works perfect for me with Lancom and other standard firewalls. And yes, configuration is made with a Win XP Desktop Application. Nice about this: They got a Desktop VPN client as well which will be configured exactly the same way. So if you got a working setting for your Laptop you can manually copy the settings and they will work on the PPC as well - thats what I did.
Some univeristies use a WLan called EduROAM.
http://www.eduroam.org/
But somehow HTC HD2 cant connect to it.Seems like a personal certificate is the problem.
Has anyone got this working on HD2 ?
It works on Nokia phones running Windows mobile 6.5
you need to download one of the latest version of securew2 client from your uni website or the developer's website. follow instruction to set up the connection given by your uni IT department.
I'm using eduroam connection now in UCL.
Thanks for your answer.
I downloaded securew2
But I still cant get it to work.
Do you have to provide this information on your campus ?
SSID: eduroam
authentication: WPA2
kryptering: AES
EAP-typ: PEAP
authentication: MSCHAP v2
For me WPA1 works better, also AES is wrong. Then you select "Secure W2" in the drop down box not peap. SecureW2 needs to be configured as well. Your university should provide you with that info. You usually don't need the radius part with the cert! That's just to protect you from connecting to the wrong network (and thus giving them your password).
Above information about WPA2 is from my campus informationsite.
After I made some settings on "Eduroam connection" i cant change them.
As soon as push eduroam it tries to connect.
The only way to change them is to install a new rom, so that the phone is
like it was from the first time.
quart666 said:
Some univeristies use a WLan called EduROAM.
http://www.eduroam.org/
But somehow HTC HD2 cant connect to it.Seems like a personal certificate is the problem.
Has anyone got this working on HD2 ?
It works on Nokia phones running Windows mobile 6.5
Click to expand...
Click to collapse
I took my mobile to my University's IT Department and they set it up for me and it works great, I get all of my student emails directly to my mobile. Hope this helps.
bahardman said:
I took my mobile to my University's IT Department and they set it up for me and it works great, I get all of my student emails directly to my mobile. Hope this helps.
Click to expand...
Click to collapse
ROM version ?
In my case,
I download SecureW2 personal client 2.04 ce, install it on my phone via active sync.
Settings>Menu>All settings>Connection>Wifi>Wireless networks>Menu>Add new
and start configuring the settings. Different network will have different settings.
I don't think ROM version matters in this case. It should work with your device, if you got the right SecureW2 client and settings set up on your phone.
Btw, IT department or university's website should provide sufficient information for you to set up the connection.
Good luck.
The IT people cant get it to work......
They say that they cant get it to work on HD2.
Thats why I turned to you guys.
Still no luck, secureW2 keeps asking for user/pass, and yes I know its the right user/pass. A friend at work tried his username and it doesnt workl either.
If I connect to Eduroam on my pc it works, so nothing wrong with user/pass
quart666 said:
The IT people cant get it to work......
They say that they cant get it to wrok on HD2.
Thats why I turned to you guys.
Still no luck, secureW2 keeps asking for user/pass
Click to expand...
Click to collapse
You might need to get another version of secureW2 client.
I tried a secureW2 client provided by my uni and i faced the same problem as you. It kept on prompting me for username and password. I changed to another client (SecureW2_Personal_Client_204_CE), downloaded from SecureW2 forum, and it worked great!
During the installation of the client, registration is needed, i could register and install it couple of times on my phone without any problem. However, yesterday when i tried to reinstall the client after upgrading my ROM, the installation failed at the registration part. Maybe because they stop providing the free version?
I managed to get it installed on my phone again via activesync though.
Cant find that version.
I downloaded version SecureW2_Enterprise_Mobile_313_GA_TRIAL.exe
bump..
I still cant get it to work
http://www.chalmers.se/insidan/SV/arbetsredskap/it/bastjanster/eduroam
Chalmers University of Technology uses Thawte premium server certificate for authentication.
What you need to do is this, go to Thawtes website and download their certificates:
(Apparently I cannot post links, but just google for "thawte root certificate" the file is at www dot thawte dot com slash roots)
The certificate you need is located in the folder Thawte Roots\Thawte SSLWeb Server Roots\thawte Premium Server CA\Thawte Premium Server CA.cer
Download that to your HTC HD2 and install it by just clicking it in the file browser on your phone.
Then you can just follow the instructions you found at their webpage.
Hope this helps.
//a
how to connect to EDUroam
Firstly, this refers to connecting an HTC android phone (specifically the HTC Desire, but what I get from the web is that they are all much the same, these HTC android interfaces).
The problem starts when an innocent user looks for a WiFi network and finds eduroam. It then asks for not particularly relevant password information and cannot connect because the configuration of the default network setup is wrong. If you try to get the phone to forget that network it appears to do so that when you reconnect it still assumes that the connection was correctly set up. In order to get it to forget their network properly you have to enter the wrong password several times so that the phone thinks you have illegally trying to access the network. It then completely forgets.
The network discovery procedure will again come up with EDUroam, and the configuration should follow the instructions on the following website from Oxford University: <search for android eduroam oxford in Google>
In fact the names given on the HTC desire setup are slightly different. The important thing is that the EAP type should be PEAP, and the secondary type should be MSCHAPv2.
You then enter the username which will be effectively your registered e-mail address at your own institution, and then use as a password the thing eduroam calls "network access token" (16 lower case alphabetic character password generated for you if you buy your institution on request.
You then connect up and miraculously you have the connection you wish!
You should check that the connection is mobile roaming capability on your phone and checking that you really do have Internet and e-mail access as you wish through the WiFi connection directly.
I have been looking for the SecureW2 Personal Client 2.0.4 for Windows CE package (original filename: "SecureW2_Personal_Client_204_CE.zip"). I have been unable to find it and the sources given in this thread no longer exist or are no longer available.
If anyone has the file, please provide it.