Database Users

VPN - CISCO

Hello : I have in my laptop a cisco vpn client. Is the only way to read my outlook exchange mail.
I have a token
http://www.dealtime.com/xPO-RSA_Security_100PK_RSA_SID_700_HW that i had to use the code with my password to get into my work network.
Ok the question is : Which aplication can do this in wm5 , like i do in my laptop with vpn cisco client.
Thnks a Lot
Luis,

i need exactly the same.
I tried AnthaVPN and Bluefire. Both claim to work with cisco concentrators.
With Bluefire i couldnt get it, but i saw in this forum people that made it work.
I think it depends on the configuration of the concentrator..so maybe you can try it.
About Antha, i could made it work, but made my wifi stop working, and i got some problems with active sync...
So for now...not very good news.

Try NCP Secure Entry Client:
http://www.ncp.de/english/services/testsoftware/index.html
Had similar problems with Antha (wireless could not be turned off any more), NCP works with our CISCOs in wireless and UMTS-dialup mode.
=) Georg

How to open Cisco VPN?

Hi!
In our company we have Cisco VPN clients on laptops. How do I open VPN connection from TyTN?

.............probably not going to happen.
...did you install the client on your phone?

ClCisco does not have client...
There is no official client from Cisco. AFAIK.
There is third party program that I have not installed... Because it is so expensive. First I want to try with what I have...
In TyTN there is clien inside which should support appropriate protocols. It does not support changing RSA-key... afaik again. Any suggestions?

Hmm.
It should work, as long as your company doesn't demand that your computer be joined to a domain or anything. Hostname, username, password should be all you need.

Group password...
I think the biggest problem is this group authentication system... Groupname and password. There is no way to set those parameters.

VPN Clients that support "Group Authentication"
If you require "Group Authentication" you'll need either the:
Bluefire
http://www.bluefiresecurity.com/products/vpn/
(I'm testing with the 15 day free trial and it works, with one annoyance - it does not reestablish automatically if I lose phone signal, and have to reconnect, typing in password again. It will be $79 to own)
or the:
NCP VPN client:
http://www.ncp.de/fileadmin/pdf/datenblaetter/NCP_DS_Entry_Client_CE.pdf
(see 30 day free trial download link at end of the .pdf, I have NOT tested, but read it works here: http://forum.xda-developers.com/showthread.php?t=356489, $83 to own)
Good luck,

Thank you for pointing the other... I've also been able to find Bluefire but had no time to test it. Good to know that it works. Yes I really need that group authentication. I'll test this second one also.

I've got Bluefire VPN working with a Cisco VPN Concentrator and RSA authentication.

_mike_ said:
I think the biggest problem is this group authentication system... Groupname and password. There is no way to set those parameters.
Click to expand...
Click to collapse
I've been trying to connect my Tilt to my Cisco ASA5510 device using standard L2TP and I can't get it to work. No need for groupname and password, but it always fails.

The inbuilt client lt2p does work with cisco vpns we have it working through a cisco 3005 concentrator. It is a bit of a pain to set it up correctly at the concentrator end. If anyone is interested i'll put together a guide based on what we did.

If anyone is interested i'll put together a guide based on what we did
Click to expand...
Click to collapse
That would be great!

Please do.

No luck here in WinMo 6.1 .... please advise us on your findings ....
Thanks!

any updates???

Basti756 said:
I've got Bluefire VPN working with a Cisco VPN Concentrator and RSA authentication.
Click to expand...
Click to collapse
Please do share what u did to get this working .... versions, configs, etc.
Much appreciated!
Danke!

vpn client?

hey guys,
am trying to connect to my office's VPN with my vario II. the default software provided does not seem sufficient. for one, i have one of those security key ring things which means my password changes every time i want to connect.
my pc uses cisco's vpn client...
any ideas? right now i'm just synching my exchange server with my pda using activesync, but wouldnt' midn having it on the go! there's no "external" access as such for the exchange server - it does have a web front end but its highly customized and isn't as easy as just configuring it as an external data source on my pda...

This one works perfect for me..
http://www.ncp.de/english/download/testsoftware/index.html

We use AnthaVPN at my university and it's supposed to work quite well with Cisco concentrator gateways, but be warned, if you have the latest 3.3 aku, you might run into problems like I did regarding loosing 3g internet connectivity on your hermes. However it could have just been a fluke as I didn't bother trying a fresh install of antha after a hard reset or anything since 3g is just as fast as my universities wireless internet anyways
Hope this helps

You can also try Bluefire. They have a 30 day fully functional trial version.
Find out more Here

Applestar said:
http://www.ncp.de/english/download/testsoftware/index.html
Click to expand...
Click to collapse
I have installed this but can't see any way of configuring the VPN connection. How did you configure it?

You have to use the PC client in order to create a configuration file and then transfer the file to your device

duh!
thanks!

bluefire is amazing. i bought it.

I came close to getting bluefire to work on our Cisco network... But once connected it would not transfer data.
I read on a seperate post here that alledgely the medianet unlimited plan uses the wap.cingular access point. That point is NAT based and some vpn clients do not like that... So they refuse the connection based on changing ip addresses.
I am not a networking expert so I do not know if this is in fact the case.
I do know I tried every freakin setting for bluefile and could not get a vpn tunnel from my phone to our Cisco vpn... So I gave up!

NCP
Could I get more specific infos about bluefire? They wanted a 5 page survey before they would send me a (business) trial.
Well, NCP Secure Entry VPN Client works perfect for me with Lancom and other standard firewalls. And yes, configuration is made with a Win XP Desktop Application. Nice about this: They got a Desktop VPN client as well which will be configured exactly the same way. So if you got a working setting for your Laptop you can manually copy the settings and they will work on the PPC as well - thats what I did.

VPN in Windows Mobile 6

Hi,
I'm currently on a HTC Trinity using Mary's 3.3.5 ROM and want to be able to connect to my universities WiFi network but to do so I need to use a VPN tunnel, anyone recommend a good PPC App that will allow me to connect to my universities VPN?
Cheers,
Mike

mikecsmith said:
Hi,
I'm currently on a HTC Trinity using Mary's 3.3.5 ROM and want to be able to connect to my universities WiFi network but to do so I need to use a VPN tunnel, anyone recommend a good PPC App that will allow me to connect to my universities VPN?
Cheers,
Mike
Click to expand...
Click to collapse
WM6 Pro includes both a PPTP & a L2TP/IPSec VPN client. This will work with most VPN routers & firewalls, however they may not be configured to support it. If you can connect using Windows 2000/XP's built-in PPTP or L2TP/IPSec VPN Client then you can almost certainly connect with WM6's.
A lot if VPN Routers & Firewalls are supplied with a 'free' Windows client that has the documentation geared around it. However most (if not all?) of these products will work with the native VPN client in Windows 2000+ (and WM5/6). I would try and stick with the L2TP/IPSec client but this requires some additional steps over setting up PPTP - on both the client & server (router). It is worth the extra steps in my opinion though.
Andy

I have the same problem ... I am not able to connect using the default VPN client ...

Hi,
There's a great review of vpn clients by Menneisyys in the Wiki. It's entitled:
'Access Your Desktop PC From Your Pocket PC!'
I'm sure you'll find it very useful because it would point you in the right direction as regards VPN tunnelling to your Uni's server.
kiwi992.

kiwi992 said:
Hi,
There's a great review of vpn clients by Menneisyys in the Wiki. It's entitled:
'Access Your Desktop PC From Your Pocket PC!'
I'm sure you'll find it very useful because it would point you in the right direction as regards VPN tunnelling to your Uni's server.
kiwi992.
Click to expand...
Click to collapse
HI!
Thank you for your reply, but this articles are about "Remote desktop" - like solutions for WM - based devises. Not for connecting to VPN.
Did anybody have had any success so far?
Any working 3-rd party VPN clients / Solutions?
Thank you in advance.
Dmitry.
====
keyword list: VPN; connection; VNP over WIFI; VPN WM5; VPN WM6; VPN problem; VPN client;

Hi,
You might find Manneisyys' review very long but if you take your time to read it, you'll see that he talks about the various VPN clients and how they compare. VNC, VNC+, etc are all mentioned there.
Just take your time to read it.
kiwi992.

Nice article, is the VPN working?
Do you have the WM6 VPN client working? Specifically the ActiveSync -> VPN -> MS Exchange functionality that was there under WM5?

kiwi992 said:
Hi,
You might find Manneisyys' review very long but if you take your time to read it, you'll see that he talks about the various VPN clients and how they compare. VNC, VNC+, etc are all mentioned there.
Just take your time to read it.
kiwi992.
Click to expand...
Click to collapse
Thank you for your answer!
But. Once again: the article talks about REMOTE CONTROL with the use of things like: RAdmin, MS RDP, etc.
This sofware - are remote desktops, so called VNC, not VPN clients in a classic way.
There is a little mess we get at the moment. (I've defenetelly got)
Let me describe in detail:
People need VPN here for many reasons, for me it is:
- to connect to some VPN through WIFI with our WM5 \ 6 device.
In my case- this is a public WIFI internet provider, which has a wifi coverage in the city.
Wifi is open PPTP. I need to type in a login \ pass on the web page I get, to start using the internet in current wifi session.
The ALTERNATIVE way to conect to internet - is to establish a VPN connection over the wifi.
I can successfully do in on the laptop.
With my UNI, WM5, AKU 3.5 - I can connect to VPN with the built-in VPN Client, but the first request to internet (via browser or Messaging send-receive) - drops my VPN connection, as it described here in the forum.
So: we need some software that can work.
I tried so far:
1. BlueFire VPN - just can't connect.
2. Antha VPN - just doesn't work.
I have heard thah on some other ROMs there is no problem with the built-in VPN client for PPTP, will try with some other WM6 ROMs later.
Any solution so far?
Thank you, kiwi992
Thanks to everybody!

Hi, im sorry for my bad english.
I have the same Problem. I search for an VPN tool. I have wm6. I know ther ist an VPN client but it doesn't work. To connect to the VPN in my University I need the L2TP/IPSec "safety andcertificate" but I don't kwon where I can load this.
thank's for helping

IronMaster1987 said:
Hi, im sorry for my bad english.
I have the same Problem. I search for an VPN tool. I have wm6. I know ther ist an VPN client but it doesn't work. To connect to the VPN in my University I need the L2TP/IPSec "safety andcertificate" but I don't kwon where I can load this.
thank's for helping
Click to expand...
Click to collapse
Hi! The L2TP/IPSec is a special story.
It is widely discussed here at forum: xda-developers > General discussion > Networking >
Search for *VPN* string on this forum.
This is the: http://forum.xda-developers.com/showthread.php?t=302520&page=2&highlight=*VPN* one of the success stories.
You need to obtain the certificate from the system administrators of your network. You may also have some "magic" URL in your campus network, where you can download the required certificate. This URL should point to the inranet web page of the web interface of the VPN server.
If your goal is to securely connect to some specific computer on the network, you should use one of the VNC programs: the VNC server part on the computer, and the VNC client on your device.
In any case - first check your certificate \ settings on, say, Windows XP laptop, connected through WIFI, first, then continue with the device.
Good luck!
Dmitry

VPN problems
I don't know if this issue is specific to my device (pharos gps 600 gps phone), or to windows mobile 6 which I'm running.
I can't connect to my vpn through wifi, the reason being is that I cannot associate any connections through the wifi card with the vpn info.
Wifi card doesn't show as a selectable modem in the modem tab next to the vpn tab in the vpn config. Only modems are cellular line modems, bluetooth, and one "hayes compatible com1" which is my usb I would guess.
Does anybody know how I might get around this?

WM 6.1 ActiveSync Exchange Sync over PPTP VPN WORKING ON FIXED SCHEDULE

I'm an IT guy and I just got into smartphone PPCs for the first time after a long-time hiatus from PDAs when I used to be a Palm owner. After my last palm, a LifeDrive, got stolen I moved to a Moto Q wich was a big dissapointment OS wise, and I never really got into modding it or anything, just set my POP3 e-mail server and used it like that for 2 years (draw back was that I didn't have contact sync nore internal e-mail sync that got handled by my exchange server). My contract with that Q expired and I made the move to a Sprint Mogul with WM 6.1 Pro and I'm NEVER LOOKING BACK!!!
Anyways, enough about me, this is my first contribution so I wanted to do the little intro.
I had searched around a bit about how to get ActiveSync to sync my company's Exchange server through PPTP VPN (we don't have it published with a certificate for an actual push config) but all I found was info on how to setup the VPN itself, being an IT guy that was like pointing out the obvious to me as I had already got that running and connecting but couldn't get anything but the OWA site opening in IE and Opera.
Basically what I figured out was that I had to program a work URL exception in the Connections control panel under the Advanced tab. There I added my exchange server's IP address as a URL and used that IP to program the server under ActiveSync with all the usual credentials. I can't configure it to receive as items arrive, instead I had to let the configuration run on a 10 minute schedule. Every time the schedule is up I see the VPN connecting pop up and it syncs PERFECTLY and disconnects the VPN. (It doesn't turn on my screen each time, it just pops up if I'm using it; but that pop up can be turned off if it gets to annoying).
I don't know if anyone else knew about this but I though I'd share this info as I searched for a few days and found nothing, ended up figuring this out myself. If this is new info I'll post more detailed configuration information for those who desire it.

BTW, this is working over the Data Plan and WiFi as well.

Wow. your a god...
I been trying to figure why it kept disconnecting the vpn when it synced up.
Adding the work url exception works perfect...
(Im using WM6.1 on a Samsung Omnia)
Many Many thanks!

No problem dude! I'm surprised no one else has really found this helpful. Glad I could help!
BTW, those exceptions work very well for internal web sites as well. I use it to log in to web-based management consoles such as Symantec's Mail Security for Exchange, Symantec Endpoint, basically if you got an internal website of some sort you can access it through VPN using a Work URL Exception.

I was looking for this info too, i would like more detailed configuration information about this.
Thanx in advance...
Roland hendriks

What part of the configuration are you having trouble with? Configuring the VPN, the Exchange Server or the URL Exception?

Thanks
I personally am thankful for your information. Even if none of the other 1000s of readers out there say anything...
Thank you for sharing your knowledge.
Tim

Glad I could help! I know I broke my head over this one during the first week of me having a WM phone. I figured it out thanks to the Fdc Soft Task Manager using the Netstat utility. It let me know exactly what the network stack of the phone was trying to do and the URL exclussion I just stumbled upon and reading what the page said it lead me to believe that it might be a routing table for configured "WORK" connections. And it worked.
During the past month or two of using my exchange like this and switching around ROMs and cooking my own ones now I've noticed that having TCP Data Reconnect and Transmission Retry settings in your registry set to high will cause Active Sync to take a long ass time for it to actually route communications through the VPN connection. I noticed this after using custom ROMs wich some have these settings increased to ensure communications go through but they raise connection timeouts way to much. On my own custom ROM I've set these to defaults (2 and 4 respectively) and Active Sync only takes about 1 minute to start syncing onces you hit sync while you wait for it to dial the cellular line and the VPN.

you talk about the vpn..
i think you are in the very small percentage of ppl who can get that to work.
i have the activesync set to manual and have tried the vpn type to both IPSec/L2TP and PPTP
w/o success..i always get a UN PW error which i know cant be so..
i set the host ip to what was shown from "whatsmyip"..
searching for quite awhile, i see thousands of ppl who cant get it to work and have
never found a reliable method that works for anyone but the person who posted it.
if you could back track a little and post how to do it, there are probly
thousands of ppl who would find it very useful and really appreciate it.
thanx

Well one thing is how to setup a WM device's VPN client to connect to your VPN server and another is actually configuring your VPN server. Do you have a working VPN setup in your corporate network already? This usually is setup by having a static IP assigned to your corporate internet connection and a firewall configured to allow VPN access with all the necessary traffic and authentication routes.
If you don't have a static IP in your office and use a lower cost DSL or Cable connection you aren't SOL, for these types of connections you can use a service like dyndns.org to dynamically upadate your dynamic IP into a static dns name like: mycompany.dyndns.org for example. This requires you to setup your firewall or ISP modem to communicate with dyndns.org to report the changes. Most firewalls come with this funcionality already built-in, but most of them also call them by different names so you'd have to look up your equipment's documentation on how to report a dynamic dns service.
I would be happy to help you setup your VPN correctly but its more practicall for me to help you setup a checklist on which type of VPN you want to setup (IPSec or PPTP) and what your corporate network's infrastructure looks like and let you know what to look for in google; there is PLENTY of very helpful information on the web on how to setup VPN but first you have to know what you need and how you are going to achieve it and then you'll know what to look for.
Each setup is very particular to the customer's needs and the network infrastructure that is setup and how much security you want to use (IPSec is a naturally secured VPN tunnel protocol while PPTP is not secured by nature but can be secured with a Radius server in your DMZ validating authentication in an encruypted manner to your Active Directory service).
What I posted above will work for an already existing and working PPTP VPN connection wich I already had running for years in my office and I regularly use with my laptop to connect to my exchange server while on the road or at home. What I posted above is what is need to get your WM device to connect to an already functioning PPTP VPN server.
Hope this helps. And if I'm to help you make a checklist I need a lot of information:
Type of ISP (static IP or dynamic IP)
Type/Brand of firewall device
How the devices are connected together (dumb modem or internet router from your ISP to your firewall's WAN port or a full blown router provided by your ISP wich is patched into your firewall's WAN port)
Internal network configuration (both AD and Exchange on same server (SBS) or separated)
What amount of security you are looking for.
Send me some PMs and maybe I could at least point you in the right direction.

nttdemented: I'm doing the PPTP shuffle at the moment, and wanted to pick your brains..
The basic connection is running fine - e.g. when I add 192.168.0.1 as an Exception and go to http://192.168.0.1 in Pocket IE the VPN fires up and I see the page just fine.
I've also added '10.6.1.8' as an exception, but if I go to that address in PIE, I don't see any network activity (using ethereal/tcpdump) on the 'ppp0' server interface (I use Ubuntu server's pptpd) ...
Can I assume that your Exchange server is hosted on the same machine as your PPTP server? Some MS SBS or similar?
Even if I configure an http proxy (on the 192.168.0.1 IP) I see no activity when I try the 10.6.1.8 address. :/

thanks so much!!
that i didn't find/read about the "exceptions" option in WM before...
Somehow, when i got my phone, i got it to work without this workaround, it just worked, out of the box, no exception setting required. (VPN settings + exchange server location were enough)
But yesterday, from the one moment to the next, it suddenly stopped working.
In my efforts to get it to work again i deleted the exchange settings, but doing that, I deleted all my contacts and my agenda! I was in big trouble because I really needed those , but after reading your post, i got it working again! my phone is synching "as we speak" and i'm very happy!
don't know how it worked before, don't know why it stopped working, all I know is, it's working now!
you made my day

Good to know!
Cheers!
I've since stopped using this method as we got around to publishing our Exchange server with an SSL certificate so I'm actually using SSL enabled ActiveSync push on my phone now.

Excuse me but perhaps you can help me too.
My problem is that I can get/sync my mails using WIFI.
If I connect thru GPRS, y go to send/receive and I get all the mails. If I'm on my office and connect thru WIFI to the work net I also get all the mails from the exchange server.
The problem is when I'm outside my office and connect to other wifi net and try to sync my mails. I have an HTC TOUCH CRUISE with WM 6.1 original from HTC without any flash.
Thanks in advance.

VPN connection doesn't always connect for ActiveSync synchronization?
I have had ActiveSync working with an Exchange server over a PPTP VPN connection for years now, but there has been one nagging issue I can't figure out. For the most part it works, but sometimes when ActiveSync tries to sync it will not make the VPN connection. There is only one connection listed when I tap on the icon on the notification bar - the phone's data connection. So in activesync, the icon with the arrows spins for a while but nothing synchronizes. I think it ends up saying "waiting for network" or something like that. It seems to always work when I manually hit "sync", but sometimes it fails on scheduled synchronizations.
Any idea why this happens sometimes?

oh...cheers...got my brain back...
The exceptions rule has almost fixed mine now. I'm getting mail but not through Activesync (just sits waiting for network).