Related
I've got a problem with my new MDA Pro and my legal copy of TomTom5.
It looks like TomTom is getting slower and slower when I use it, almost like there's a memory leak or buffers that are overflowing.
When I start TomTom and directly close it, there's no problem.
But when I start and navigate for about half an hour, the maps aren't draw smoothly anymore. Just like a cartoonmovie where some images are missing, the picture is "jumping" (hope you know what I mean).
When navigating for about one hour TomTom takes about 2 minutes to close and the program memory has about 10 Mb less than before I started TomTom. This memory is (as far as I know) only released with a soft-reset.
When navigating for more than 90 minutes TomTom doesn't close anymore and there's no reaction from my MDA. A soft-reset was the only solution.
I have this problem not only when navigating, also when I use the "advanced planning" option this problem occurs.
All POI's are disabled.
When TomTom slows down, it's not only the program. All other functions of the PDA slow down. For instance, when I receive a text message the sound takes about 30 seconds to complete the notification sound... :?
My MDA Pro is upgraded with the latest T-Mobile Netherlands ROM.
Don't know if the problem also occurs with the origininal ROM because I flashed it right after I bought it.
TomTom is version 5.21.
Any thoughts?
Using the same windows rom (vodafone ext) I have the similar issue, I can install it and get as far as choosing a voice, when it gets so slow it stops, after which it closes. Oh dear! No more tomtom. Big problem and no one knows how to fix it, amazed you got it to go as far as actually loading up at all.
Greg.
greg123 said:
Using the same windows rom (vodafone ext) I have the similar issue, I can install it and get as far as choosing a voice, when it gets so slow it stops, after which it closes. Oh dear! No more tomtom. Big problem and no one knows how to fix it, amazed you got it to go as far as actually loading up at all.
Greg.
Click to expand...
Click to collapse
Greg...I can see you've searching up and down on this....pm me and Ill take your headache away m8.
BR
Any change you could let me in on the secret too?
I have the following issue with Igo8:
When I want to start Igo8 it says: "failed to reserve virtual address"! After soft-reset Igo8 starts normal.
Can someone know something about this issue?
Same problem here. RAM Cleaner doesn't solve the issue either. For me, it seems that the problem only occurs if I already started iGO8 earlier; it doesn't occur if I've got the phone running for multiple days without starting iGO8.
Yes the same with my TP2 and IGO8....
This problem has been bugging me too. RAM cleaner fixed it for me once on a level 3, but never did since. I'm thinking memory leak?
I have the same problem too, what I did was usually I disable the T3D before I run the iGO8 (8.3.2.x), this usually help without have to reset my TP2. That is why iGO support said they did not cerified it work on TP2 (even most people said it work great on TP2). Used at your own risk.
I have experienced this issue few times, ussually when I turned it on for the third or forth time (or later on) in a given time, soft reset fixed it.
I am experiencing the same strange behaviour.
I have to shut down and then it restarts correctly.
Obviously it's not a certified device
Thanks for your replies. It's really annoying to soft-reset the device everytime, when I need IGO8. I hope to find a solution for this annoying problem...
Update to the latest version Jun 8 2009, 8.3.2.93112.
I think they solved the problem.
bogypop said:
Update to the latest version Jun 8 2009, 8.3.2.93112.
I think they solved the problem.
Click to expand...
Click to collapse
I still have the problem with that version. What made you think that version fixes it? Any reference?
bogypop said:
Update to the latest version Jun 8 2009, 8.3.2.93112.
I think they solved the problem.
Click to expand...
Click to collapse
Where can I find this official update? I have regularly bought mine and it has a lower reference number...
I allready have the latest version of IGO8 (Jun 8 2009, 8.3.2.93112). But thx for your advice though...
Hi Guys,
I was having the very same issue with my TP2 but it seems I managed to trick it by using the following sequence of events.
1. Disable TF3D
2. Soft-Reset the device
3. Once the device was operational again I started iGO8
4. Exit iGO8 then re-enable TF3D
5. Start iGO8 again and check if it works (it did for me)
6. Soft-Reset the device again and let it load all it's stuff including TF3D.
7. Start again iGO8 to check if it would still work (it did for me).
Well... it works for me since then, but on another note I don't have too many softwares installed on my device at this time so I'm not sure whether or not iGO is having memory leak problems. I'm pretty sure that the issue is coming from an incompatibility between TF3D and the iGO interface and also the same was confirmed by other people on the various forums.
Right now I'm using the latest available iGO8 v8.3.2.93112 (not instaled just running it straight from the storage card).
I hope the above would help you out, but in any case should anybody find a better stable solution, please let us know about it.
Cheers,
Hello this is a memory problem...i have notice if the ram is under 70 MB this error will come.....
Hi All
Yes, this is solely a memory (RAM) problem.
What is the problem you may ask, well, the phone takes a truckload of RAM to simply ...run.
Consider this.
Specified RAM - 288mb.
Available 'total' RAM - 288mb, minus 100mb = 188mb.
RAM in use (OS + TFlo) - 288mb, minus 100mb, minus up to 130mb = 60mb.
Available RAM to actually use is often 60mb or less with no running apps!!!!
This is a serious issue with this phone, it is not fair and even misleading for the consumer - i mean really, not enough memory to run just ONE app!!!
(Granted, a GPS app is large, but the device does have the chip, doesn't it?)
C'Mon.... I bought a phone with 288mb of RAM, not 60mb - [email protected]%#[email protected]!!!!!!!
Don't get me started on the specified ROM size of 512mb, of which we get to actually use just 277mb....
Cheers to all
Jabberoo
jabberoo said:
Hi All
Yes, this is solely a memory (RAM) problem.
What is the problem you may ask, well, the phone takes a truckload of RAM to simply ...run.
Consider this.
Specified RAM - 288mb.
Available 'total' RAM - 288mb, minus 100mb = 188mb.
RAM in use (OS + TFlo) - 288mb, minus 100mb, minus up to 130mb = 60mb.
Available RAM to actually use is often 60mb or less with no running apps!!!!
This is a serious issue with this phone, it is not fair and even misleading for the consumer - i mean really, not enough memory to run just ONE app!!!
(Granted, a GPS app is large, but the device does have the chip, doesn't it?)
C'Mon.... I bought a phone with 288mb of RAM, not 60mb - [email protected]%#[email protected]!!!!!!!
Don't get me started on the specified ROM size of 512mb, of which we get to actually use just 277mb....
Cheers to all
Jabberoo
Click to expand...
Click to collapse
I think that this is not the problem. My kaiser will run Igo8 With high resolution, buildings, TTS enabled, etc with just 25mb free memory. why can my kaiser do it with 25 mb and the TP2 not with 60mb free memory?
Verry strange...
The second thing that I dont understand is that the problem will come directly after starting IGO8. My kaiser will run slow or crash when it has too less memory remaining. but by the TP2 it will give an error directly after starting and BEFORE loading the app... This will give me the idea that it is a verry simple and basic problem...
update: I've noticed that IGO8 will run fine on the TP2 with Touch flo 3D disabled with only 35mb ram...
Ranney
Well, ran into the same problem on my Igo8 too. Like others said, I have to soft reset it everytime when I encounter that problem...really frustrating it will waste you couples of minutes to do soft reset and wait for the apps to comes out.
Well, i have tried all versions, but still getting the same stupid virtual address. Almost give up, but I like Igo8 interface very much.
I dont know this is really works for you or not. Without me realized after I have installed SecondToday and then ran my Igo8 from here, then I never have this problem again EVER!!! I am a heavy user of this Igo8, cos every where i go, i depend on this gps software. Now I never have this problem again. Thanks Godness.
Hope this help.
hi,
I have got similar issues but in my case it was (most likely) due to the skin I was using (gurjon 6.9.2p).
After I reverted back to the original igo's skin, I have not been reported with any error since last few days.
I am using 8.3.2.97313 [July 3rd] release.
I'm wondering whether a newer WM6.5 ROM will solve it. Maybe Manilla 2.5 (or 6) may make a difference. I'm currently playing around with NRG's ROM, and will monitor iGo8 over the coming days.
i use windows mobile 6.5 without any touchflow. and i have to softreset too.
i can start igo8 any time i want but if i dont softreset before, i will lost the gps signal every 10 seconds.
i have the igo 8.3.xx in my HD.the problem is that when i run it and move with my car the igo is about 3 secs behide the original position.any idea what is the problem????
thank you
Well I have IGO8.3 on my HD, WM6.5, and it runs smoothly - much better than TomTom. The problem could be that your version isn't HD optimized or something. Try different versions or other apps like TomTom. It will help you to figure out if it's smth to do with your phone's hardware...
By the way, incidentally, my GPS has stopped working about 2-3 hrs ago for no reason at all! Gonna try a diffrent ROM and see if it helps. It used to take 25 seconds to power up IGO and get a GPS Fix before. But now - no fix at all...
Make sure your system clock is perfectly synced and update satellites with QuickGPS, this should reduce the lag.
hi, i have had an unusual issue in that the GPS on the device does not work any more, it did before around 2 weeks ago when i used google maps with the compass working as well.
i have tried soft resets and to check the com ports (i am unsure of the defaults for com port, is it 0?) and have tried to set them manually and also to allow the device to automatically set them. The digital compass has allways been working.
i have installed a fue gps applications recently, since i last used the gps successfully, and have noticed the gps not working in any of these and then not working in the pre-installed applications;
(installed in descending order)
-iGO 8
-GPS sport computer
-wifi fo fum 2
-GPS speedo
-hd speedo
-gps cycle computer
i have uninstalled these since and the GPS still is not being picked up in the digital compass application and google maps (both the preinstalled apps on the original ROM out the box, and were working with gps around 2 weeks back).
i have made sure i am always in clear sight of the sky, but no prevail their.
if some one could please help me on what to do to regain the functionality of the gps again, i would be great full.
p.s. has anyone else had this issue or a similar one?
Try downloading something with setelite tracker. GCZII is such application (good for geocaching btw).
Sometimes, the GPS has wrong satellite data. You will see (on the satellite tracker) it can receive some signal, but the satellites will not show above you, but let's say all to the north.
Go to start/tools and run QickGPS and download new data. That should help. It will download current data via internet. But it may help not. Sometimes bad data on these servers are the source of the problem.
So next thing you can try is use file explorer and go to Temp folder. There is file xtra.bin. That's where the data are stored. Try to remove it and soft reset. Try running your GPS without the file. It will take some time to fix (up to 5 minutes), but it should work.
If that does not help, QuickGPS will get the file back. I had problems like this on X1 .. usually something helped, either refreshing, or removing the file. On HD2 I needed it once, and refreshing the data using QuickGPS helped.
I'd suggest to try htc's own gpstool and see if you get anything at all on com4. search the forum for htc debug tools, the exe is in that package. And...disable quickgps and delete xtra.bin from \temp
Nice application .. I was looking for something like that ! Thanks !
thanks for the replies.
sofar i tried the qgps file removal with out success.
i have aso found something else out thats concerning, thats in igo 8 when i run a auto detect scan for gps device it come back saying their is no gps device.
it also seems to be the case when i ran gczll and the htc-gps-tool.
so i think that the gps driver? or device is the root of the issue?
hope this helps with the suggestions on how to resolve the issue?
Thanks for the helping again.
Aslo check settings/external gps.
First tab (programs) should be: COM4
Second tab (Hardware) should be: None, and 4800 (or anything I guess).
Third tab (Access) should be: Yes, manage GPS automatically
Dr.Sid said:
Nice application .. I was looking for something like that ! Thanks !
Click to expand...
Click to collapse
You're welcome ;-)
Have you installed any "tweakers" like BsB Tweaks, HD2Tweaks or similar? Have you messed around in the registry with drivers and such? I assume you didnt see any gpsdata at all on port com4 using the htcgpstool, what exactly happened when you opened com4?
Imho, if the above post by Sid doesn't do the trick, the easiest way out is probably a hardreset.
[edit]
what rom are you on, stock or custom, and have you never been able to use the gps or did this happen after a while, perhaps after you installed an app or something?
its stock rom, i havent ventured into cooked roms yet. (reading into it, getting a understanding of it all over last 2-3 days)
haven't messed around with the registy of bsb and dont have htctweaks (not sure on how to do that yet)
nothing happens when i run the htcgpstools, on com 4, same as it does nothing on any other application. it just continues to look (for a long time) or says no gps (like in igo 8).
im thinking that hard reset my be the best option as well.
could something have happened to the radio and broken down the communications of the gps device? (im not a expert, just a theory?)
and just on a cooked rom question.
i wanted a rom that has copilot removed and the full ram enabled, and just to include the performance update drivers (i have adk 1 runtime atm that improves the jitteriness) and other updates that hot fixes have done. but i want to keep stuff like animated weather etc.
from what i have seen it looks like dutty is the man for this type of rom?
could you recommend a cooked rom for a first timer/noobie?
Thanks.
I had a similer problem on my Touch Diamond.
Try switching off.... take the battery out for 1 hour, reinsert battery then turn on. I think that the GPS locked up.
Good luck
steveianson said:
I had a similer problem on my Touch Diamond.
Try switching off.... take the battery out for 1 hour, reinsert battery then turn on. I think that the GPS locked up.
Good luck
Click to expand...
Click to collapse
Hmm, you might be right. I still believe your best shot is a HR...
OK well did a hard reset and that has done the trick.
The GPS works and locks with in 10seconds from my window so working brilliant again.
Thanks for all the suggestions and the time taken to help out.
Hello, this is my first post on XDA-Developers forum. Hope I placed in the correct section/forum.
I flashed my HTC HD2 with NexusHD2-Froyo V1.9G from Tytung which I will render thanks for making the ROM.
Everything works fine, except of Google navigator, this app freezes the phone. I need to remove the battery to shutdown the phone and boot again. First i have run Android from SD-card and also then Google navigator froze the phone. Thought this might have to do with running Android from Sd-card. Was happy with Adroid, so flashed the phone with the NAND version. Still the same problem with Navigator.
When running Navigator, can search location and location is also found, but when driving in my car, and the Navigator is following with the GPS it freezes. Screen doesn’t react and also the hardware buttons doesn’t react. At this moment the phone is really warm. So did install Setcpu and underclocked the CPU. Tried again and the same phone freezes. This time the phone wasn’t so warm, seems the underclocked did his work good.
Tried many other applications/games and no problem at all. Example the game Asphalt 5 HD works fine and the phone doesn’t seems to get very warm. (CPU at normal speed again)
Someone having the same issues or a solution?
Sorry for my bad English
I have exactly the same problem with my Leo - I tried several Android ROMs - same result. Bute I also had freezes as WM6.5 was installed so I think it`s a hardware problem as other Leo`s seem to work fine with Google Maps Navigation. On Monday I will get my new Leo - After flashing I will post any news as soon as possible.
CU!
My English is poor, but too XDA worship. So come learn, support.
Thanks for the reply. I had no problems when Windows Mobile 6.5 was still installed on my HTC HD. Also did not found a solution yet.
What the meaning of the last reply is??
hoerni1000 said:
I have exactly the same problem with my Leo - I tried several Android ROMs - same result. Bute I also had freezes as WM6.5 was installed so I think it`s a hardware problem as other Leo`s seem to work fine with Google Maps Navigation. On Monday I will get my new Leo - After flashing I will post any news as soon as possible.
CU!
Click to expand...
Click to collapse
I've the same problem on my HD2 on Android Rafpgina 4.2 Rom
It freez by about 5/10 mn using Navigation
Trying other Radios = same problem
Could you tell me if the change of your HD2 resolved the problem ?
It should suggest a gps chipset problem
Yeap, still the same problem and I can't figure out why.
I've tried more than 10 different apps, but allways the same. After some time the phone freezes. I remove the battery, start the app and after a while, the same.
I tried working with battery only or with car charger only, still the same.
I removed and brought back all my apps with titanium backup, still the same.
I have a suspicion that when it stacks and after rebooting, if I leave it in peace (I mean don't do anything with the phone, just keep it without running any app), for some time (10-20 minutes), then it starts and keeps the gps app more time, than the time of the initial freezing. Maybe this is a symptom that could ring a bell to an experienced guy...
Anybody, any ideas?
I use Leo with nand froyo 2.2
I do not ues google navigation, support.
Another sister thread
There is also this thread, by gunjahman, with the same subject (more or less) so we can combine powers.
Check it out
http://forum.xda-developers.com/showthread.php?p=12398773
If you are using gps navigation software on sd card, try format micro sd card with FAT32 and DEFAULT ALLOCATION SIZE option, do not choose allocation size such as 32,64 or any other except DEFAULT.
Try it and GL.
@gunjahman,
Thanks for the URL, I will follow that thread also.
The software isn't installed at the SD card.
Crash-nl said:
@gunjahman,
Thanks for the URL, I will follow that thread also.
The software isn't installed at the SD card.
Click to expand...
Click to collapse
Then free up your phone memory as much as you can, move everything you can on your sd card which is formated with FAT32 and DEFAULT ALLOCATION SIZE.
That was the exact issue I had with my phone.
iGO and Aura worked fine in the beginning but Google Navigation would freeze the phone at random times. Only solution was to pull out the batt.
Mine became worse when iGO and Aura also started loosing GPS lock and the only way to get it working again was to reboot.
In the end I sent my phone back to warranty and they replaced 'a board'
Working fine now.
Sorry, that I didn't replied earlyer. To busy with work and other things. I delivered the HD2 to Vodafone so they can hand over to repair, get a suggestion back, because they told this isn't within the guarantee. The printboard need to be replaced. I think they mention the motherboard and they told the battery gets to hot.(total costs €285,-) This isn't what my complain was, so answerred back that the phone freezes when enable the GPS module and not the battery gets to hot. Told the battery gets warm, because the phone get warm. Waiting now for an answer back.
Better late, then nothing. This is solved for me, found the same phone on marketplace a few months ago.
Thanks for helping me.