Database Users

Unable to fully delete program....why?

Ok here's the thing, I downloaded and installed a program from "Skyscape" but couldn't get it working successfully and now can't seem to fully "get rid of it".
Everytime I connect to PC a window briefly pops up (I think its something looking for updates) and everytime I explore my Storage Card through my PC I can see the following folder "Skyscape_Backup".
Everytime I delete it and everytime I plug back in its there again :?
Please Help...
What can I do?
Cheers for any assistance,
marto

How are you deleting it?
Have you used add/remove programs?
After that, check your windows\start up folder and also the program folder it might have been installed in on your device.
If it's still there, it might be a service. Use SKTools to clear that kind of rubbish. Backup first though, danger will robinson, destroy all operating systems...
V

Yep tried "remove programs" which now no longer lists the problem program, also tried deleting through PC. Can't see anything which has the same sort of name in "windows" and "startup" except maybe (and thats a big maybe) ssdeviceid application.
Can't see anything in my book about SKTools I assume its a download?
Will have a search through the forum database and so on
Thanks for your input V.

Yep, sktools is a download.
Is the window that's popping up on the pc or the pda? You didn't state I think.
Also, check in activesync. beneath where it shows all the syncing progress, does it show anything related to skyscape there?
V

Sorry for the delay V (was trying to figure out how to do screen shots)
Yep the popup is at the PC's end.
I installed SKTools it looks pretty dangerous... is there any particular function from it I should be using?
Cheers, marto
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Oops forgot to mention "no" nothing seen in ActiveSync.

Yep, don't worry about sk tools. I thought it made sense that the program was on your pc.
Have you removed the program from your PC?Again, use add/remove programs on pc to remove all trace, then check this program: Autoruns
http://www.sysinternals.com/Utilities/Autoruns.html
Check each tab for possible entries. the program obviously tries to sync itself with the PDA everytime. I hate programs that are so misbehaved and think they know better.
For the PDA, backup often so you can always go back to a clean-ish setup.
V

Hmm no success looking with Auotruns, and nothing in "Add/remove".
Was thinking while crashed out on the sofa that I might try to install it all again then uninstall it in a more stable way (I think I may have done it a bit all over the place) otherwise might blast off an email to there support....
Another day more time to play... :lol:

terminal Server Port number

Hi,
Is there any way to use the terminal server client to use different port numbers. I have terminal servers that use non standard as well as default ports, we change to get though firewalls ect. I know you can change the default listener port, is there anyway to enter the port number from the TS interface, in the windows world I would just enter servername:2323 and it would use port 2323.. Any ideas?

With the WM6 version of Remote Desktop you can enter the URL/IP Address followed by a colon and then the port number, but not in WM5.
You could try and install the WM6 version that's attached, although I haven't tried it on WM5. (DO SO AT YOUR OWN RISK, ETC)
What you can do with the WM5 version of RDP is
1. Copy and paste the default RDP Shortcut on the PPC and rename it with any name describing the server you want to connect to.
2. Run the new RDP shortcut and then use the Running Programs tab in the Start > Settings > System tab > Memory app to actually stop RDP. (This creates the necessary registry entries.)
3. Edit the following registry key on the PPC.
[HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\<NEW SHORTCUT NAME>]
Add a DWORD value named "Server Port" and enter the new port number
you want to use.
For what it's worth, the WM6 version allows automatic login and is far more responsive.

Terminal Server
Thanks!! The WM6 works great, one note it doesn't replace the old version. Just had to create a shortcut to the new version and it works with no problems.

hey, i´ve got some questions,
The Lazy Slug said:
1. Copy and paste the default RDP Shortcut on the PPC and rename it with any name describing the server you want to connect to.
Click to expand...
Click to collapse
i copied the original wptsc.exe and renamed it to exampletsc.exe and started it. i stoped it as you describe and checked the registry for the keys but i can´t find a new folder with the name of the new rdp file... i can only find and edit the default folder.
The Lazy Slug said:
For what it's worth, the WM6 version allows automatic login and is far more responsive.
Click to expand...
Click to collapse
hey, how can i turn on the auto login function? and if, where do i have to put the data (server, username, passwort)? in the rigistry?
thank you!

Thanks for Remote desktop software. I am now able to connect to my Desktop PC with my HTC Touch (WM6). But I can connect only through data cable. Can i connect through wifi. I am already browsing internet in my Pocket PC through wifi through my above Desktop PC's Internet connection. Pl suggest. Thanks

still cant connect
guys
first of all thanks for the new cab file
i am using new wm6 with the software given...
but stillcant connect
its says invalid IP or computer name.. or a network error ocured.
while i am ableto access the computer using lan connection.

can not install
hi,
I downloaded the files, when trying to install, in my WM 6.0 its saying u donot have enough permission. pls help
thanks
Partha

partha06 said:
hi,
when trying to install, in my WM 6.0 its saying u donot have enough permission.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mike2089 said:
Thanks!! The WM6 works great, one note it doesn't replace the old version. Just had to create a shortcut to the new version and it works with no problems.
Click to expand...
Click to collapse
does not work on wm 6.5, crashed abut ui

opera mini cab??any 1 have it

im looking for the opera mini cab or jar which ever format file it is... i tried ota download on my phone but it wont install n if i go to the main site n try 2 download it 2 my p.c i shows that it doen't support the t-mobile wing... any help

you go to mini.opera.com/beta and download the first one. it'll download but say that it can't open it.
then u open esmertec jbed and click on menu>install>local files and it shuld find a file called "mini".
if it says it's corrupt then just re-download it.

thanks for the reply but I tried everything u said but it still didn't work I when 2 the link u gave me but I told me "the phone detected is not supported".....n once I do download the jar/jad file n install it opera mini runs internet set up but said it has fail kuz the theres .no data connecting...could this be kuz im running the 5.99 t-zones proxy????

Make sure you've installed esmertec's jbed FIRST. Then when you got to the site, and click on the high memory version, Esmertec should take over. It SHOULD connect just fine as long as you have the proxy setup properly and you're not downloading it through WiFi or have your WiFi on while you're setting it up.

ivanmmj said:
Make sure you've installed esmertec's jbed FIRST. Then when you got to the site, and click on the high memory version, Esmertec should take over. It SHOULD connect just fine as long as you have the proxy setup properly and you're not downloading it through WiFi or have your WiFi on while you're setting it up.
Click to expand...
Click to collapse
what is esmertec's jbed??? is that the java launcher??? kuz if it is then yes i have that...n i have gone 2 the site n tried downloading the high memory version but it also fails 2 connect...under what model phone should i be downloading it,since the t-mobile wing is not supported???

Do you have Esmertec's Jbed or the java manager built into the Wing? That built in manager is absolute crap.

i have a stock rom so i guess i have the built in java manager...do u know where i can get Esmertec's Jbed ???

Here is the file. Unzip it, Copy the JAR file to a folder on your device, Open Esmerted Jbed ( or other java application ), Search the file, Install and your done.
Here you go:

well i installed it n this is what i go.... i dont know why it cant connect. i have the proxy set up correctly im useing the proxy set uprigth now..so i do have it set up rigth...any more adjustments i shold have???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I followed the instructions but I keep getting the same unable to connect error message as jorv88. PLEASE HELP. I wanna try opera mini cos i've heard so much about it & im bored of IE. thanks

[HINT] Using Myriad JAVA taken from SE X2

Hello everybody,
Maybe a couple of you are like me not really satisfied with the integrated JBlend. It doesn't create shortcuts, looks bad etc. ...
For me the Java-client of the SE Xperia X2 did solve that problem. You can load it here: *KLICK* (Post 2)
Install it and if you're not using WWE-Rom then do the following changes within the registry:
ultrashot said:
[HKEY_LOCAL_MACHINE\Software\Apps\Esmertec Java]
"ProgramsGamesURL"="\\Windows\\Start Menu\\Programs\\Games" ;this
"ProgramsURL"="\\Windows\\Start Menu\\Programs"
\\Start Menu\\Programs\\Games is a language-dependent part
Click to expand...
Click to collapse
Do a softreset and install any midlets you want. Shortcuts will be created by default (see my screen). With this JAVA-client it is also possible to run midlets in Landscape mode (2nd screen) - added Opera Mini to rotation support with BsB-Tweak.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you want to open your midlets that are already installed on your device then go to Windows/java and simply click all the *.jar-files within that folder. They will now automatically install with the new JAVA-suite.
Maybe someone likes it as I do.
Cheers.

I downloaded the java from your link and installed it. however, I can't seem to find it in the list of programs. How do I access the new java engine? I am using WWE ROM.

As I said you have to reinstall your installed Midlets (can be found in Windows/java, *.jar-files). Then shortcuts will be created in your start menu. To see a list of all installed Midlets go to Settings (Wm6.5, not Sense), System and click on "Java".

Wonderful!
Thanks for sharing! Im using it now..
Great tip!!

Scrammy said:
Thanks for sharing! Im using it now..
Great tip!!
Click to expand...
Click to collapse
You're welcome!

hi what version opera mini did you get (link pls)
i cant get it to install . it get half way three times then fails
thx
marty

So then load it via PC. *KLICK*

ok story so far, removed myriad installed opera mini 5 beta 2 worked ok
reinstalled myriad this time to device reset then reinstalled opera , this time it worked but its working on jblend still how do i get it on myriad
also shortcut on start menu always reinstalls it
help appreciated otherwise i'll get bored and not bother lol
thx
marty

I have installed this on my Xperia X1, though when I try to run a file for Example: "Jbenchmark3D" it comes up with a message saying "could not start the JBenchmark3D application"
Any ideas what could be wrong? the icons for each app shows up in my programs list, they just done run (when I try they show the message above)
I hope someone can help..

Can it Run on Samsung i900/i908?
Hi, I installed Myriad Java on my Samsung Omnia i908, but whenever I run the Jar file, it just caused a certification problem. Can Myriad Java support Samsung i900/i908?
Thanks!

hey i tried to install myriad java on my omnia i8000 running winmo 6.1 official rom but it says "either it is not signed with a trusted certificate certificate error or one of the component cannot be found. try reinstalling." can u please upload the extracted jbed.exe in ur \windows dir please . . . . thank you.

I would like to know how can we change the fonts size in Myriad Java? In Esmertec Jbed, we could edit the fonts via registry tweaks, but I have not found similar tweak for Myriad Java. Anyone knows how?

Disable ActiveSync Autorun (cab)

Disable ActiveSync Autorun
When you want to run ActiveSync , Please go to "Program" , Run the "ActiveSyncRun"

so, when i need plug my cel into my pc i just need run the program and i will sync?i will dl asap xD that i was searhing for a while thanks i will reply as soon as i test xD

zxlch said:
Disable ActiveSync Autorun
When you want to run ActiveSync , Please go to "Program" , Run the "ActiveSyncRun"
Click to expand...
Click to collapse
From where you get that CAB or you created it?
And can you tell us what is the diference with this eLiAs_ASyncKiller.cab ? http://forum.xda-developers.com/showthread.php?t=386948
Witch one is better Now im using eLiAs_ASyncKiller and the Elias Killer is always on the processes to be able to kill the AS when is idle
WIth the Cab you provde what is the diferent, i mean what exactly the file do? Only write a reg keys or some procces are always runing to be able to kill it? just explain and we can see witch one is better.
Thanks in advance

i got a message
ithe program or setting cannot be installed beacuse it does not have sufficient system permissions.
any though? i cant install it from my Storage card, im installing on device memory, im running win 6.5 thanks

I tried it installed and active sync didn't run but when clicked to reactivate got a message "can't mem what said as was just after you posted trying to help another user" and never got a sync till removed the program.

zen kun said:
i got a message
ithe program or setting cannot be installed beacuse it does not have sufficient system permissions.
any though? i cant install it from my Storage card, im installing on device memory, im running win 6.5 thanks
Click to expand...
Click to collapse
True! You first need to install sdkcerts!
SDK Cert is a certificate used by the developers or programmers to sign the file/s you're using to make it/them eligible to be installed on the device. It's just like a consent from the developers for their OEM softwares to their users. To make the device accepts the file/s, the SDKCert have to be installed on the device for key matching purposes.
Hope this helps,
Senax

yea i have installed and i reinstall reset and again try install this cab no luck :S
its weird , in my Windows Emulator, works im not sure why not in my LG INCITE :S
i got wm 6.5

Guys i already told you this is the app im using http://forum.xda-developers.com/showthread.php?t=386948
Its awesome and really kill your Seync also you dont need to enable anything when you wana Sync your phone just plug the USB cable and all is done when the USB cable is unpluget the Sync is killed is simple like its must to be, also this person have alot more good litle tools for example i can recomend
ProcessKiller alias HTCDlg_killer
Im using this too on my device and all work perfect and save alot of my battery
Im using Blackstone with the ROM from my signature

i will try (again)
since i already try used before this, and i even post there, seems isnt working on my incite :S

Enable/disable ActiveSync alternatives
zen kun said:
i will try (again)
since i already try used before this, and i even post there, seems isnt working on my incite :S
Click to expand...
Click to collapse
First alternative;
ActiveSync Toggler;
http://www.pocketpcfreeware.mobi/download-activesync-toggle-v1-0-4-0.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second alternative;
Disable ActiveSync via "do nothing" ;
http://forum.xda-developers.com/showthread.php?t=646708
Maybe one of these ActiveSync workaround's will work for you,
Senax

OH THANK YOU
=)
i will try thabks a lot ;D

Try killing the activesync process before installing using task manager. its replog or something...