Bluetooth Handsfree problem - HD2 General

I have a Jawbone which was paired to my HD2. When I make a phone call it works, but when I receive a call it doesn't work. Has anyone experienced this problem? Has anyone solved it?
Also, when I place the set face down it doesn't automatically switch to speaker. Is there a setting?

1 - Answer the call on the handsfree and not on the phone.
2 - It has to be on perfect horizontal position to work (if not calibrate the g-sensor)

1- I always answer the call through the hands free but the call goes on the phone. Maybe a reset would do it.
2- Thanks didn't know that. It actually works

Related

Mobile staying on after call in bluetooth headset mode

I am looking for a tweak or registry fix/setting to help me with the following problem:
On my parrot bluetooth car kit in headset mode after a call is finished the phone stays on. This is not a problem if you finish a normal call without handsfree because you switch it off manually but when you are driving with the phone in your pocket, the phone is liable to screen presses. I have been inadvertently creating/editing contacts and making notes with the phone in my pocket after use in the car.
The screen autopower off does work if the screen is not activated for a few minutes but the inadvertent screen presses occur within this timeframe.
Any help is appreciated - thanks!
I have a similar problem when using my bluetooth headset (Samsung WEP200)…
When I make a call using the headset the screen stays active, and if I turn it off during a call it turns it self on again after the call has ended. Not fun if it’s in my pocket and it decides to call someone back without me knowing.
Is there a general setting or fix that disables the screen when you answer or make a call with the headset active?
Have you found any solution to this?
aneben said:
Have you found any solution to this?
Click to expand...
Click to collapse
Nope, not yet…
I can’t believe that there aren’t a lot more people with this problem!? It’s a REALLY STUPID problem to have on such an advanced phone like the Blacksone when nearly EVERY basic mobile phone has this feature since the dawn of BT headsets.
This might leave me no other choice than to retire my beloved Blackstone and dig up my old Samsung phone so that I can drive my car safely with my phone in my pocket…
There is an app called Touch InCall Screen Tweak. With that you can configure so that screen will go off quickly when answering and ending calls and bluetooth headset is used. It works great for me!
aneben said:
There is an app called Touch InCall Screen Tweak. With that you can configure so that screen will go off quickly when answering and ending calls and bluetooth headset is used. It works great for me!
Click to expand...
Click to collapse
I actually tried that app yesterday but didn’t get it working as I wanted. How did you configure it?
I guess I can try it again – would be great if it works!
Well, now I can make a call without worrying about it to end (with the InCall Touch app), but when the call is ended we're back making random calls without knowing to whom.
This amazes me, how this feature can be missing. It’s not something I admit to my iPhone friends who still tries to find something that Blackstone can’t do – cuz this even works on the iPhone!
I'll try tweaking till I or someone else can find a solution to this rather embarrassing problem.

standby when ending call via BT-headset

Hello there,
has anyone an idea how to realize this:
blackstone is in standby - bluetooth is activated - bluetooth headset is on - both connected - call comes in - I take the call with the bt-headset - talk - I end the call with the bt-headset - blackstone remains on until the adjusted time for standby is reached
but I would like the blackstone switch into standby mode immediately after ending the call
is this possible ?
greetz
smuggs
This needs addressed - sleep after a call during headset mode
In headset mode the phone does not go into sleep mode or power off automatically after a call. This is a major issue for those of us who leave the phone in the pocket in the car or when using bluetooth headsets. I have finished calls recently and then 5 or 10 mins later my phone would connect to someone random in the phonebook whilst driving which is quite embarrassing "I didnt call you" - "yes you did"!!
In the meantime I am using constant device lock but this is a clumsy solution for what surely MUST be a common problem. Can anyone else not help us out and try to get the device to sleep after a call during headset mode? I would be so grateful for a useful solution that doesnt involve a constant device lock that I dont really need!
Cheers
I'm having the same problem also....
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
the_flyer said:
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
Click to expand...
Click to collapse
ooch aye the noo ...
obviously NOT ... which makes me wonder ... as for me this is a main issue
pimpin' seems to be more important than functionality ... huh?
i guess i will write to htc and see what they r saying
will post answers here
greetz
smuggs
Sounds good man, keep up posted. Its a major issue for me too!
ok folks .. here is the very annoying answer i got from htc support
You recently wrote us about an issue that you have encountered with your HTC Touch HD. There is only one way to instantly set the device into standby mode: please press quickly the power on/off.
what shall i say ... THAT'S CRAP !!!
and i'm still thinking that there must be a workaround ... redefining the buttons or something like that ... any ideas from the specialists in here ?
c'mon guys - help us out here
greetz
smuggs
that's really strange...just tested it.
connection htc/jabra bluetooth.
htc device lock ON.
an incoming call arrives, pick up the call via bt-headset. end the call via bt-headset. phone is immediately locked again (htc own device lock), display is on. after 1 minute also the display turns off.
or do you mean something completely different?
Same here and it feels retarted.
Ooe of the major purposes of a bluetooth headset is to avoid contact with the device. So having to take out the phone or handle it (in a car/office whatever) after a BT call is rediculous.
BT headset drops call
I am not sure if I should pose my questions here but my Jabra BT headset is connected to my Blackstone on standby mode via BT. However, when an incoming call comes, the BT headset does not get the call but is transfered to the HTC handset instead. I have no problems making outgoing calls on the Jabra headset. It's frustrating when I am driving... could anyone tell me how to remedy this?
Thanks in advance.
end call via BT into standby works with LockMeLite
hello there,
with LockMeLite http://forum.xda-developers.com/showthread.php?t=478606 and my samsung wep250 bt-headset
it works
this headset is non-a2dp-capable
dunno if an a2dp capable headset will work, but will test is (next week)
greetz
smuggs
I have tried flashing newer fancy roms and tried various lockers but no applications are intuitive enough to fix this simple fault. When making a call in 'headset mode' the fast sleep mode prevents accidental presses during a call. Unfortunately when the call is ended via handsfree/car kit/recipient, the phone wakes back up to life.
Any locker I have used is active indiscriminantly when pressing the power on button to wake the device from sleep. I have tried lockmelite, hd tweak for inbuilt MS lock, pocketshield and another locker however none have the function to only lock the device whilst in headset mode and after a call has ended. This is a request to developers, expert cooks and modifiers please can anyone help us out?
Thanks a million
Check this, it can do the trick...
h..p://www.pocketshield.net/default.htm
S2u2 V2.04 workes fineas you needs, even look during a call (gives black screen)
I'll do a try
As I have the same request/problem I'll try the following with the help of AGEProfile.
- I create a profile actived when the headphone is connected, when this profile is activated it launches a program named MySuspend so my phone is suspended.
- I create another profile activated when the headphone is connected and there is a call in progress, this profile does nothing but it exists (only)
So when my phone goes connected with the headset (BT) it goes suspended.
When I receive a call it wakeup as normal and the profile is switched to the second one (but does nothing)
When the call finishes, the first profile is activated again and the phone goes suspended.
That's all (and it should work, I just made the setup for that).
Regards,
P.S. sorry for my english because it's not my language.
I also have this same question. After ending the call the screen stays unlocked and will inadvertently call a number sometimes.
I tried
Yes I made a try yesterday evening in real conditions and it work very well
So I'm very happy
I forgot to mention that I also use the Inesoft to have the screen locked when one call come in.
Hope this will be useful for you too
Regards,

[Solved] Handsfree and waiting through Loud Speaker!

Ok XDA, i have one big/huge/enormous problem,
Scenario:
Talking on the phone, using the Wired Handsfree (which came with the phone), when i get another call (call waiting) the notification of the other call is going through the loud speaker! not only that, the ongoing is immediately routed the loud speaker, anyone near me can hear the conversation clearly!!!!!!
does anyone face this?
i checked it on 2 X1s, 1 black & 1 silver and it's there.
anyway to solve this
same problem for me
I have a similar problem with a Parrok CK3100. The phone can't ever seem to decide for sure what speakers it's supposed to be using.
Sometimes I'll press the Voice Command button on the bluetooth device and the phone speaks out, sometimes the car speakers speak out.
I just don't know.
Annoying that the much, much cheaper E71-2 handles all of this with great aplomb, as did my Q9h.
any one else facing this problem people?
i started searching in order to get a clue,
the main thing i'm thinking is that it's caused the same way VOIP (including skype) used to behave using speaker phone!
what do you think?
I have the same problem with a german x1. ROM R2A.
Is there any solution for this problem
thx
walk
Fixed
Bugs Fixes (Registry):
Sound is routed to the Loud Speaker when having a phone call and get a waiting call while using Handsfree
change the key HKCU\ControlPanel\SoundCategories\Ring\Speaker to 0 (default value = 1).
added to the wiki of X1
Thanks. I've changed that setting to see if it solves my problem, too.

Calling problems on Xperia

Hello XDA crew,
I have some problems and I hope you can help me with that. Xperia phone is really cool but one thing for me is really annoying. And that is the calling performance of Xperia.
These are the main problems:
1. When I plug in the headset, the ringtone plays both on the headset speakers and the phone speaker. Is there a way to let the ringtone play only on the headset speakers?
2. When I plug in the headset, the microphone of the headset isnt active. Only the microphone of the phone is active. So, people can not understand me when I speak to the headset microphone. But they can hear me when I talk to the microphone of Xperia.
These are some other problems but not so important for me:
3. The volume of the call is too high. Even when I set the volume low, people can hear the person who I am talking with.
4. Microfone of Xperia get active after for about two seconds when I answer the phone. So, I have to wait for about 2 seconds to say 'hi'.
5. The answer button of the headset doesn't work.
Can someone help me with this problems or just one of these problems?
Note: I have hardreset my phone two times and reinstalled the ROM software one time via SEUS. I didnt get any result. I have the original Vodafone R2 software.
I have the 2 second delay too. Using gtrab wm6.5 custom rom
M.Ozturk said:
Hello XDA crew,
5. The answer button of the headset doesn't work.
Click to expand...
Click to collapse
Unplug the headphone jack during a call and plug again (during the same call) and press the answer button. It will terminate the call and start working (until your next xperia soft reset). Double-press the answer button when idle, and it will repeat the last call. If that doesn't work, try it again and again after the first trick of plugging/unplugging and it will work on your 4th/5th try. From then on, all answer/hangup/'repeat last call' functions will work. Until you soft reset of course.
I'm calling a toll free (service center) number to do the trick whenever I have to use the handsfree.
VanAuberjim said:
Unplug the headphone jack during a call and plug again (during the same call) and press the answer button. It will terminate the call and start working (until your next xperia soft reset). Double-press the answer button when idle, and it will repeat the last call. If that doesn't work, try it again and again after the first trick of plugging/unplugging and it will work on your 4th/5th try. From then on, all answer/hangup/'repeat last call' functions will work. Until you soft reset of course.
I'm calling a toll free (service center) number to do the trick whenever I have to use the handsfree.
Click to expand...
Click to collapse
It works (on a WM6.5 rom also)
Nice little trick there, thanks
Tnx for the trick vanauberjim. So it seems more like a hardware problem. Anyway, I will try it tomorrow. Hope that the main problems also be solved like this.
Both 2. and 5. get fixed with the trick, but I just hope SE will find a permanent fix. It's not a solution to unplug and replug the headphones during calls.
My question is: are we the only 3 persons that have this problem? Is this problem originally caused by the headset hardware? Is it caused because the plug is so tight that it severely scratched the middle ring in the headphone jack and it can't always make a connection with the middle ring (the microphone one)? How many people have this problem?
Have the same problem
I do have the same problem and workaround works for mee to but it is annoying!
@vanauberjim, I can ensure you that we are definitely not the only one with these problems. I saw on a popular dutch forum that a lot of people have exactly the same problem.
M.Ozturk said:
@vanauberjim, I can ensure you that we are definitely not the only one with these problems. I saw on a popular dutch forum that a lot of people have exactly the same problem.
Click to expand...
Click to collapse
Have you tested with another hands-free set ? is it the phone or the hands-free causing the problem?
I have send my hands-free to SE yesterday so they will check it and if it was ok I will send the phone back.
About 3 seconds of delay when I answer , I haven't done anything yet , is it a bug , I mean do we have this problem or every X1 out there.
Ok, post back soon because if it's faulty hands free we only have 6 months warranty on handsfree (and battery) and time's running out. The phone has 2 years warranty so we have plenty of time for its handset's faults.
I got the same problems, is annoying BTW ... and about the trick mmm quiet annoying as well, but if is the only way to make it work, no more than just do it.
shwan_3 said:
Have you tested with another hands-free set ? is it the phone or the hands-free causing the problem?
I have send my hands-free to SE yesterday so they will check it and if it was ok I will send the phone back.
About 3 seconds of delay when I answer , I haven't done anything yet , is it a bug , I mean do we have this problem or every X1 out there.
Click to expand...
Click to collapse
I think it's a phone problem. I use the original headset and sometimes when I plugin the headset the phone calles the person who I have called earlier. Now I have another stupid problem. When I plugout the headset, the phone still thinks that the headset is plugged in on the phone. I see the headset icon on the phone and when I call someone, I cant hear and speak with the person. Only way I can do this is to plugin the headset again and speak that way. When I plugin and plugout for several times, the headset icon dissapears and I can make my call again without a headset. I think that alle these problems are because the jack plug doesn't function good.
Another issue. I call it issue because it's not a problem, but just a stupid choise of sonyericsson:
- Some soundnotifications during calling like 'busy tone' or 'waiting tone' plays from the main speaker of the phone in instead of the calling/ear speaker. This way, all the people who are sitting next to you hears that the person who you are calling is busy
It will be for the 4th time that I go to the shop with a problem. So I will ask to the shopper if I can choose another phone. I'm thinking about the Touch Pro 2. I'm sick of the problems of Xperia. Don't think that HTC will have the same problems.

Topaz + BT hands free (Sony MEX-BT2500)

Hi there,
Can anyone help me solve this problem:
Ik have a Sony car radio with a BT hands free function (MEX-BT2500) in my car. When I make a call, the radio stops and I can speak hands free, hearing the conversation on the car-speakers. All nice, like it should be.
Problem is when I receive a call. The radio stops and I hear a ringtone (not my phone-tone though ). When I awnser the call, the caller can hear me, but I can't hear him, unless I take the phone in my hand and put it on my ear. The sound doesn't come through the car-speakers. So an incoming call can't be awnsered handsfree.
With my former phone (nokia 6230), it was no problem. Anyone knows how to solve this?
If it was the same as my problem, turn up the volume on the phone
My phone was the exact same, for some reason when it connected it was turning the volume right down!
Hope yours as as simple
todd69 said:
If it was the same as my problem, turn up the volume on the phone
My phone was the exact same, for some reason when it connected it was turning the volume right down!
Hope yours as as simple
Click to expand...
Click to collapse
Unfortunately my problem is not that simple. I got an incoming call yesterday when I was driving, but again no sound. When I called back, there were no problems. Does anyone else have a solution?
Well, I don't have the Sony-stereo, but I've got a Pioneer with BT. I have bumped into several issues with it, and the solution is the same every time:
-first, if you have a settings-option called something like "reset BT-memory", try that one, and pair phone again.
-If that doesn't work, next step is full reset of the stereo, meaning you pull it out and disconnect the power. Then plug it back in, and re-pair phone.
This at least did the trick for me, now voice-dial works perfectly, and I even have "BT Audio", meaning I can play my Topaz' music on my carstereo without hassle.
Could also be something else simple, you are using the stereo to answer and not the handset?
If I answer using the phone with my stereo then I get the same issue as you, answer using the stereo and all is well

Categories

Resources