Related
Is any useful way to remap the Green and Red Phone button and the volume slider button? I mean for launch application or any function. Thanx.
There are some such programs for volume slider.
The most simple I prefer is attached here.
Just put it to the \Windows\Startup folder. It just "unbind" slider but not remaps it to another buttons. This will allow to use slider as F6/F7 buttons in programs able to hook them e.g. Haali Reader...
Thanx
It seems to be ok but where did you attach it? On my MDA is no offered file to download at this time. ThankU.
I've got it
Ok. Now is the sheet with uploaded file appeared. I've got it and extracted it. After i run the *.exe file it does nothing. Why?
because it should do nothing
This utility just frees slider buttons from default binding to volume control.
If you have an application that understands F6/F7 hardware key pressings (slider up/slider down) you may bind these key in the program.
As for me - I use them to scroll text up and down in Haali Reader text reader program.
But (as I said above) there are another programs to use slider up/down control. Unfortunately I don't remeber where I saw these utilities - but they really exists
And, as far as I'm back to the Andes from (Blue Angel) - I think I will write another one specially for Himalaya/Andes.
Ok, let's wait some days. If there are any results - I'll post the report here
P.S.: BlueAngel is the best HW keys equipped device i've ever saw But...
Thanx once again
Thank you 4 ur help. Now i understand that. And what about the Phone buttons? Any ideas? Ex.I want to use red button as Ok/Close simulation. Any ideas how to do that? Thanks.
Nobody unmaps phone buttons. It is possible but unresonable because of HTC is a phone device also. But I'll implement this feature too.
OK
I will wait for it.
The very first (and buggy) try of HW remapping utility is done. The application setup is available HERE
After installing .CAB file go to Start -> Settings -> Buttons and see the changes...
DO NOT INSTALL THIS APPLICATION ON BLUE ANGEL!!!
It will hide four lower hardware buttons until hard reset!
1. This app was tested on Andes with WM2003se, but should work on Himalaya/Magican with WM2003 and above
2. You will lose the possibility to use hardware key mapping in other applications forl remapped buttons. I need to re-grab buttons from time to time because the system tries to thieve them from me
3. Currently I don't now how to emulate green and reed buttons functionality after unbinding them from the system.
4. I can count any number of button pressings (3,4,5...), but -
5. WinCE reserve codes for only 15 hardware buttons (40C1..40CF)
There are some ideas for future improvement. But it would be nice to know your thoughts.
Just to "stimulate": I can create settings screen during setup to allow flexible configuration where you will
- choose which buttons to handle and how many key pressings to detect;
- choose option to unbind and/or re-map volume and phone buttons
- ???
And let me take a time-brake for 2 days before next programming session
The utility is ready. It allows you to:
remap each standard hardware button to 2 or 3 "virtual", simulated via double or triple clicks;
use volume slider to simulate Up/Down direction keys or create additional "virtual" hardware buttons;
remap Red and Green phone buttons to 1,2 or 3 hardware buttons each.
In a result you may create up to 15 hardware buttons (system limit)
Just install program and check Start -> Settings -> Buttons.
Here is Oficial AEBPlus home page, full desktop-based setup (~27K) and Direct link to CAB file (~30K)
Well done!
Excellent software! Thank you once again for your work. Works very very well!
man this is great really like it
works perfect :lol:
Seems to work great. Haven't had it running long enough to see if the camera button will get stolen back (big problem for me on XDA IIi), but being able to map the volume is great.
In the next version any chance of adding an <enter> option like Vito Button Mapper which I think just sends a <carriage return> to select whatever is highlighted.
Is "<Ok/Close>" option in button settings applet not the same?
NO, <OK/Close> generally tends to close the current window rather than selecting whatever is highlighted.
Also whatever application keeps on stealing back the camera button is still doing it. I don't know if it is part of the UK O2 customisations or the core PocketPC Rom, but eventually whatever function is mapped to the Camera button gets re-mapped back to the camera. This also happened to me with the standard button mapper and Vito button manager. It's a little annoying since the camera button is the most usefully positioned, and it is also easily knocked, starting the camera at awkward times.
Ok, I'll add this option for camera button (a bit later, in a case other suggestions arrives).
As for the re-hooking button by camera application: AEBPlus initializes all of the buttons from time to time. Currently this take place every 30 seconds. So if you will wait a bit - all buttons should be re-grabbed again
This does not seem to help because whatever application that is resetting the camera does it in the same place as you are storing the button mappings. When I go into the Buttons Setup it will now say that the Camera button is mapped to the Camera.
Yes,I see... It looks like Camera application is a pushy application . The solution is to remap "normal" Camera HW button to 3 press instead of one, but I don't like this.
Anyway - utility was released.
New features: added option to emulate Enter key with Camera button.
Hi AE, your utility is great. It is very useful but SIMPLE and SMALL.
I used it instead of other button mapper software.
There're some issues need tobe improved:
1) Mapping "Green" and "Red" button:
Enable mapping when they're iddle only (phone function does not work).
E.g: I'd like using Red button to close running app. But in phone function, Red button is still used to hang-up the phone as original its function. Anytime I have a phone call, I can use Red button to cancel a outgoing/incoming call.
You can refer the program of mamaich in this web site.
2) Single press is too low:
I press a key one time and wait 5 secs or more until it works. It's too slow. Can you improve? Double-press is OK.
3) Press n hold:
Can you add "single press n hold" for all hardware-keys? I think "single press n hold (after 3-3.5 secs)" is more convenient than "double press" or "tribble press". Do you think so?
Hi AE, very usefull application! Is there any way that we can have an options screen, where we can change the key options we get after installing the app? That would be easier to edit our preferences if we want to make changes to our initial choices. Furthermore I added a Mortbutton to one of your simulated hard keys. Each Mortbutton can show a list of 12 apps for a buttonpress. That means That I can now bind more than 60 apps to the buttons in total! Very good for one-handed use of my Magician, thanks!
What is the action you usually take on your device? I guess tapping Ok/Close button.
It's smart to assign this action to an hardware button. But for almost PPC Phone Edition WM2K3, there are only 4 hardware buttons can be re-assigned by users and you dont wanna waste any button to simulate Ok/Close button.
Now, you can use the red phone button to do that beside its original function. It means: if you're having a phone call or a GPRS connection, pressing the red button will hang it up, if not, simulate Ok/Close button. I know that on some devices (e.g: XDA Mini...), the red phone button is used to quick minimize running applications also (e.g: you're opening Inbox Options, press the red button will go to Today screen directly without closing Inbox Options). I don't like this feature at all. I prefer using it to simulate Ok/Close button. So I've developed the tiny utility named "Red Button Remap". It has no GUI, no registry read/write. It has 2 files (total size ~11KB). It's just install then soft reset.
This utility is very useful for me so I posted here for someone like it.
I wrote it for my XDA Mini. I'm not sure about other device but it should work properly on WM2K3SE (phone edition only).
Red Button Remap version 0.1 beta:
- Re-map the red phone button on some WM2K3 phone edition devices to simulate Ok/Close button (REMEMBER: SIMULATION means it does nothing without the Ok/Close button appearance).
Will this work with WM5?
Can I assign a file to the red button instead of Ok/Close?
Thanks,
msafi said:
Will this work with WM5?
Can I assign a file to the red button instead of Ok/Close?
Thanks,
Click to expand...
Click to collapse
Sorry, I dont know much about WM5 and I have no WM5 to test. It may not work on WM5. However, you can test.
i installed it, hoping it might fix my PocketNester problem, but the software doesn't seem to have modified anything in my system. the Red button works as usually, i.e. it takes me back to the 'Today' screen.
msafi: what is your nester problem?
v
hi vijay555,
thanks for asking.
here's my PocketNester problem
and here i make a request in the forum and provide some additional information
msafi said:
i installed it, hoping it might fix my PocketNester problem, but the software doesn't seem to have modified anything in my system. the Red button works as usually, i.e. it takes me back to the 'Today' screen.
Click to expand...
Click to collapse
I just say: the program does not work on WM5 devices.
Hi,
I have installed your software in my S100, but it not works fine...
the red button continues minimizes the applications, not close them!.
I have installed also the pocket plus soft, but pocket plus not works with
the red button ...
help me, please.
thank's
Doesn't work on WM5 based HTC Wizard.
bartito said:
Hi,
I have installed your software in my S100, but it not works fine...
the red button continues minimizes the applications, not close them!.
I have installed also the pocket plus soft, but pocket plus not works with
the red button ...
help me, please.
thank's
Click to expand...
Click to collapse
Pls read the program introduce again.
Pressing Red button will simulate Ok/Close button like tapping Ok/Close button (at top-right conner) by stylus. So Red Button Remap does not concern "real close" or "minimize" running apps.
I don't think that Red Button Remap conflicts with Pocket Plus. Could you explain in detail?
dasdoenertier said:
Doesn't work on WM5 based HTC Wizard.
Click to expand...
Click to collapse
OK, now, I'm sure that WM5 is not support.
Pocket Me said:
bartito said:
Hi,
I have installed your software in my S100, but it not works fine...
the red button continues minimizes the applications, not close them!.
I have installed also the pocket plus soft, but pocket plus not works with
the red button ...
help me, please.
thank's
Click to expand...
Click to collapse
Pls read the program introduce again.
Pressing Red button will simulate Ok/Close button like tapping Ok/Close button (at top-right conner) by stylus. So Red Button Remap does not concern "real close" or "minimize" running apps.
I don't think that Red Button Remap conflicts with Pocket Plus. Could you explain in detail?
Click to expand...
Click to collapse
ah ! ok
is possible forze the application close (when i press the red button) or that is impossible?
in my opinion this capability is more useful...
thank's
bartito said:
is possible forze the application close (when i press the red button) or that is impossible?
in my opinion this capability is more useful...
Click to expand...
Click to collapse
That's possible. I'm trying develop the next updated allowing "single press" to simulate Ok/Close, "press n hold" (or "double press") to stop running app.
hi,
i have try to install and use your app another try...
but i not sure what's the difference of the redbtn function.
in ocasions the redbtn click minimizes the app's (example: calculator, configuration plug-ins...), but in other ocasions, the application is not minimized (example: message boxes or superalert config app).
the same occurs if your application is running or not...
my phone is s100 and i use with pocket plus (with the x button click configured to close apps)...
thank's
On my Magican it closes two windows (if there are opened 4 windows after RedButton remains only 2) :-(
I've tried several pouches/cases, and keep having the same problem when a call comes in and I go to pull the phone out of the case, the Messaging or PIE button get pressed inadvertantly.
So the best fix I can come up with, is to remap the buttons to activate those apps on a Press & hold, rather than just press. Problem, is that the Hermes does not allow me to map Press & hold for any of the buttons except the PTT (via PTTFix - thanks Sleuth255).
My understanding is that the Button press versus press&hold functionality is implemented in the OS, so there's got to be a way to get to it?
That's incorrect AFAIK. The record button has press and hold, but it's emulated in code.
I don't think Press and Hold is implemented in the OS. I imagine Sleuth's solution is also externally emulated and parsed back into the OS.
V
Thanks.
I'm playing with an eval of AEButton, and it seems to do everything I was looking for (and then some).
Hey Guys,
is there any way to for instance chance the button with which you take pics on the HD, I have been taking pictures in the normal way but prefer to use the side buttons or another button on the bottom.
Help is greatly appreciated,
Thanks
Agreed ... is there any software that could do this. Heard software such as AE button could reconfig the buttons but cld these be done for the HD, would be really useful and less awkward then the touch screen in my opinion
sgt_sidz said:
Agreed ... is there any software that could do this. Heard software such as AE button could reconfig the buttons but cld these be done for the HD, would be really useful and less awkward then the touch screen in my opinion
Click to expand...
Click to collapse
Hmmm - I have AEButton Plus and I have not previously played with the camera and this button mapper.
I have the volume buttons mapped. BUT, in the camera application it seems that AEB+ is no longer able to trap the volume buttons. It looks like HTC have switched off the volume buttons in the camera application.
When I exit from the camera then the AEB+ mapping works fine.
so it is not possible to reassign other buttons to this purpose? too bad, thanks for the help and please let me know if you find anything!
actually it is possible to reassign volume up to Enter (with aebplus/aebutton plus) and use it in the touch hd camera app. Well... at least it used to work for me for some weeks. Now I have exactly the same problem and don't know what could have changed.
Strange thing is: When I unmap volume up in aebplus, do a soft reset, remap the button (with some luck) I can take exactly one picture - afterwards it is simply ignored.
really strange behaviour but it shows that there IS a way to keep the camera app from grabbing keys...
I did it Application released soon!
http://www.scilor.com/leocameraanykey.html
Ok so I have this SW related problem (ROM on my sig), where home button not always works. If i hold power button until the power screen appears, i can close it and then home buton works OK for anoter lets say 15mins only, so its quite annoying.
How can map return home action for lets say holding down search key? The problem is neither about button itself (works perfect n other ROMS) nor launcher (when killing foreground app phone returns to the homescreen)
I know i can do it from screen with button savior but it's by far not as practical as using capactive buttons and it's not what I'am looking for.
Other than that the ROM is very close to perfect, so changing it is not an option
Hard keys
-SmOgER said:
Ok so I have this SW related problem (ROM on my sig), where home button not always works. If i hold power button until the power screen appears, i can close it and then home buton works OK for anoter lets say 15mins only, so its quite annoying.
How can map return home action for lets say holding down search key? The problem is neither about button itself (works perfect n other ROMS) nor launcher (when killing foreground app phone returns to the homescreen)
I know i can do it from screen with button savior but it's by far not as practical as using capactive buttons and it's not what I'am looking for.
Other than that the ROM is very close to perfect, so changing it is not an option
Click to expand...
Click to collapse
I think, must check, that Jellybean lets you do that?
Well, even if it does, I'am running MIUI on ICS.
CM10 and codefireX nightlies (and JellyTime too maybe, I haven't tried) have that working. There's a CM feature in settings called 'Hardware keys' where you can assign different functions to all keys for short press and long press. Though bliind's MIUI is based on CM, it doesn't have the option.
Sent from my Desire HD using xda premium
I see...
is there any way of getting similiar sw on other roms?
btw i'am running the official 2.9.7 MIUI based on ICS straight from miui.com, not bliind's custom build.
I remember there was some app for that.
I think it's called button remapper, and it does just that. It's in a beta version, but I used it with success. It is ROOT, but you already have that.
If you can't find it then I'd be willing to pull the .apk from a backup and give it to you.
xxkid123 said:
I remember there was some app for that.
I think it's called button remapper, and it does just that. It's in a beta version, but I used it with success. It is ROOT, but you already have that.
If you can't find it then I'd be willing to pull the .apk from a backup and give it to you.
Click to expand...
Click to collapse
Well, this app was capable of mapping short press, but it turned out mapping different keys didn't solve the problem. I guess without official update there is not much can be done... Thanks anyway.
can not be! clerical error