Database Users

Summary of Registry Hack that work on 818pro/Prophet

Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this post.
MOD EDIT:
This is also in the wiki
http://wiki.xda-developers.com/index.php?pagename=Prophet_Hacks_WM5

THX for the info.
But any hack for CHT ver. using smartdailer??
THX

Enable your built-in Lunar calendar (for WWE Rom)
enable your built-in Lunar calendar (for WWE Rom)
edit your registry:
Hkey_Local_Machine\Software\Microsoft\Calendar
set the value of "ShowLunarCalendar" to 1
then soft-reset (Optional)
open your calender program and click the on right-bottom Menu -> View -> Lunar
Enjoy

sas90850 said:
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this
post.
Click to expand...
Click to collapse
I can't find flags2 in controlpanel/phon
I have only default-alllang-goup-resdll

This one works too... (from a previous wizard tweak i think)
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000

marcov said:
sas90850 said:
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this
post.
Click to expand...
Click to collapse
I can't find flags2 in controlpanel/phon
I have only default-alllang-goup-resdll
Click to expand...
Click to collapse
Create new value. Make sure you use DWORD.

marcov said:
sas90850 said:
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this
post.
Click to expand...
Click to collapse
I can't find flags2 in controlpanel/phon
I have only default-alllang-goup-resdll
Click to expand...
Click to collapse
Create new value. Make sure you use DWORD.

Speed Improvement
1.HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE
Change 'limit' Value data to 32768
Original Value = 131072
2.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\FATFS
Change 'CacheSize' Value data to 4096
Original Value = 0
3.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\Filters\fsreplxfilt
Change 'ReplStoreCacheSize' Value data to 4096 or 8192
Original Value = 0
4.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\Profiles\MSFlash\FATFS
Change 'DataCacheSize' Value data to 4096
Change 'Flags' Value data to 40
For Step 4, if your PDA don't have this registry, add new registry and use DOWORD value.
Disable menu animations to increase performance:
"HKEY_LOCAL_MACHINE \SYSTEM\GWE\Menu"
Change "AniType" from "6" (default) to "0" (disabled).
Make sure bluetooth is alive during a conversation. If you ever have trouble with BT timing out, try:
HKEY_Current_User\ControlPanel\Phone
Change the Sleep key from a 1 to 0.

Re: This one works too... (from a previous wizard tweak i th
Gnuig said:
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000
Click to expand...
Click to collapse
Do this mean the extended rom??

Wi-fi Tweak
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\parms]
"dot11SupportedRateMaskG"=DWORD:8 Hex

mamakap said:
Wi-fi Tweak
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\parms]
"dot11SupportedRateMaskG"=DWORD:8 Hex
Click to expand...
Click to collapse
What does this WIFI tweak do for the device? I thought it was natively Wireless G?

mcnasby said:
mamakap said:
Wi-fi Tweak
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\parms]
"dot11SupportedRateMaskG"=DWORD:8 Hex
Click to expand...
Click to collapse
What does this WIFI tweak do for the device? I thought it was natively Wireless G?
Click to expand...
Click to collapse
You can read the source from here

Do we need these registry hacks with the new ROM (AKU2)?

Is there a hack to put the date & time in the title bar on ALL screens (including the today screen)?
(AKU 2.0 removes the time from the title bar when viewing the today screen.)

Urban Strata said:
Is there a hack to put the date & time in the title bar on ALL screens (including the today screen)?
(AKU 2.0 removes the time from the title bar when viewing the today screen.)
Click to expand...
Click to collapse
I actually installed the date & time reg hack from this thread in the Universal forum: http://forum.xda-developers.com/viewtopic.php?t=41968
It works on my Prophet with AKU 2.0, but it shows the date in European format (e.g., 28 . 03 for March 28). Hate to be a stupid American, but I'd prefer the month and day switched to 3-28. I wonder if that's possible?[/url]

Re: This one works too... (from a previous wizard tweak i th
wyhpower said:
Gnuig said:
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000
Click to expand...
Click to collapse
Do this mean the extended rom??
Click to expand...
Click to collapse
Yes... extrom2 to be exact.
Sorry for the confusion.
G.
PS. Still can't change writeprotected stuff though... anyone?

Re: This one works too... (from a previous wizard tweak i th
wyhpower said:
Gnuig said:
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000
Click to expand...
Click to collapse
Do this mean the extended rom??
Click to expand...
Click to collapse
Yes... extrom2 to be exact.
Sorry for the confusion.
G.
PS. Still can't change writeprotected stuff though... anyone?

Urban Strata said:
Urban Strata said:
Is there a hack to put the date & time in the title bar on ALL screens (including the today screen)?
(AKU 2.0 removes the time from the title bar when viewing the today screen.)
Click to expand...
Click to collapse
I actually installed the date & time reg hack from this thread in the Universal forum: http://forum.xda-developers.com/viewtopic.php?t=41968
It works on my Prophet with AKU 2.0, but it shows the date in European format (e.g., 28 . 03 for March 28). Hate to be a stupid American, but I'd prefer the month and day switched to 3-28. I wonder if that's possible?[/url]
Click to expand...
Click to collapse
hi there, i believe you can still change the date representation in regional settings.
Tried the software on a Pro flashed S200 ROM, however, i still have the battery on the today screen. On other apps, it works fine.

Also, with wm5 v 2 (the one with aku2), i can't seem to get phone pad to start as default.
tried this already:
HKEY_CURRENT_USER\ControlPanel\SIP
"DefaulfIM" --> {51A2CB38-154E-4C92-A625-A83871C99EC2}
Although the key remains the same after reboots, and its the same key that's found in CLSID, the keyboard is defaulted after every reboot.

thescum said:
Also, with wm5 v 2 (the one with aku2), i can't seem to get phone pad to start as default.
tried this already:
HKEY_CURRENT_USER\ControlPanel\SIP
"DefaulfIM" --> {51A2CB38-154E-4C92-A625-A83871C99EC2}
Although the key remains the same after reboots, and its the same key that's found in CLSID, the keyboard is defaulted after every reboot.
Click to expand...
Click to collapse
Yes, the keyboard is default no matter what reg hacks I try either. Tweaks2k2 and sktools tweaks don't work either. I think it's a wm5 thing and I can't figure it out.

backlight issue and registry entry "Locklevel"

Hi all,
searching for "locklevel" accross this forum did not give any result so maybe it may help to find a solution:
Since a view days i have the "backlight issue" (reseting to 7 seconds batterytimeout after standby) on my xda neo,WM5 AKU 2.0.
Changing values in registry i noticed an entry
HKCU\Controlpanel\Backlight\LockLevel. In there is a DWORD VALUE called LockLevel which had DEC Value "1" .
Changing this Value to "0" BatteryTimeout Values are kept after Standby until doing a Softreset. After Softreset LockLevel-Value ist set back to "1".
Searching for "Locklevel" using google did not bring up any result.
Maybe someone in this forum has any knowledge about this entry.
Thanks
Lone
...excuse my bad english ...

Loneship said:
Hi all,
searching for "locklevel" accross this forum did not give any result so maybe it may help to find a solution:
Since a view days i have the "backlight issue" (reseting to 7 seconds batterytimeout after standby) on my xda neo,WM5 AKU 2.0.
Changing values in registry i noticed an entry
HKCU\Controlpanel\Backlight\LockLevel. In there is a DWORD VALUE called LockLevel which had DEC Value "1" .
Changing this Value to "0" BatteryTimeout Values are kept after Standby until doing a Softreset. After Softreset LockLevel-Value ist set back to "1".
Searching for "Locklevel" using google did not bring up any result.
Maybe someone in this forum has any knowledge about this entry.
Thanks
Lone
...excuse my bad english ...
Click to expand...
Click to collapse
..have the same problem ...

Loneship said:
Hi all,
searching for "locklevel" accross this forum did not give any result so maybe it may help to find a solution:
Since a view days i have the "backlight issue" (reseting to 7 seconds batterytimeout after standby) on my xda neo,WM5 AKU 2.0.
Changing values in registry i noticed an entry
HKCU\Controlpanel\Backlight\LockLevel. In there is a DWORD VALUE called LockLevel which had DEC Value "1" .
Changing this Value to "0" BatteryTimeout Values are kept after Standby until doing a Softreset. After Softreset LockLevel-Value ist set back to "1".
Searching for "Locklevel" using google did not bring up any result.
Maybe someone in this forum has any knowledge about this entry.
Thanks
Lone
...excuse my bad english ...
Click to expand...
Click to collapse
..have the same problem ...

Have a look here:
http://www.ppc-welt.info/community/showthread.php?t=91140
Lone

Loneship said:
Have a look here:
http://www.ppc-welt.info/community/showthread.php?t=91140
Lone
Click to expand...
Click to collapse
In case anyone is interested -
http://www.ppc-welt.info/community/showpost.php?p=728080&postcount=27
This download in this post - run on your device, and it'll fix the backlight issue. I now keep a copy of this on my memory card!
--Tosh
ps. I've been here for a year, and this is my first post!

backlight brightness in MIO

hi,
I've got a huge problem with brightness,
my code is:
Code:
RegistryKey key = Registry.CurrentUser.OpenSubKey("ControlPanel").OpenSubKey("BackLight", true);
int value = (int)key.GetValue("Brightness");
key.SetValue("Brightness", (value + 1) % 10, RegistryValueKind.DWord);
key.Close();
DoAutoResetEvent("BackLightChangeEvent");
I know what registry values change but I don't know the event name to raise.
I tried "BackLightChangeEvent" and "SDKBackLightChangeEvent",which I found when googling this problem and they didn't work...
Can someone please tell me the event name?

The best Reg Edits

Hi Guys,
What do you think are the best registry edits on the TD2 and what do they do?
I have been looking through the old ones for the TD1 and i have been changing thinks like the GPS enable on the camera ETC.
Any good suggestions you might have to improve the TD2 experience would be gratefully appreciated

yah.like a compilation of regedits would be great along with its description

the only one I know if PHM regedit, it works fine with the D2

sk tools
sk tools...the best! cleanes , optimises,...the whole lot

i think he don't mean the best registry editor. He means the hack to do with the reg editor.
\\Yoshi

You're absolutely right
My bad

here i got some that i use. (credits go to the people who found them NOT ME)
Automatically lock your Diamond 2 (from way back in the daimond days)
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
To basically use Manila in landscape mode, there are 3 registry mods needed:
1) Add string value to HKCU\Software\HTC\Manila
String: EnableLandscape Value: true
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: TF3D Value: \Windows\manila.exe
3. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: TF3D Value: Manila
To use Windows Explorer in landscape mode, there are 2 registry mods needed.
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: File Explorer Value: \Windows\fexplore.exe
(in dutch the string is called verkenner, value is the same)
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: File Explorer Value: FEXPLORE
(in dutch the string is called verkenner, value is the same)
To use Navigon MN|7 in landscape mode, there are 2 registry mods needed:
(works for tomtom to, watch that you use the correct path/.exe and name of tomtom----audio-FIX
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Mobile Navigator Value: \Storage Card\Navigon\MobileNavigator.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Mobile Navigator Value: MobileNavigator
To use Excel Mobile in landscape mode, there are 2 registry mods needed.
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Excel Mobile Value: \Windows\pxl.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Excel Mobile Value: pxl
To use Word Mobile in landscape mode, there are 2 registry mods needed.
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Word Mobile Value: \Windows\pword.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Word Mobile Value: pword

Dear All,
How to remove or delete the new key from PHM Registry Editor? Thank you.

Autolock
"Automatically lock your Diamond 2 (from way back in the daimond days)
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked"
When I do this my device locks itself automatically after few secons even though I've set the backlight to go off after 30 seconds. Does anybody have a solution that can handle this problem?
thanks!

Code:
Manila Home softkeys:
HKLM\Software\HTC\Manila
String HomeLSKArguments //app argument, optional
String HomeLSKPath //app path
String HomeLSKText //left softkey text
String HomeRSKArguments //same, but for key on right side
String HomeRSKPath
String HomeRSKText

koehl said:
Dear All,
How to remove or delete the new key from PHM Registry Editor? Thank you.
Click to expand...
Click to collapse
Just hold the stylus on the string and the menu will appear.

real187 said:
To basically use Manila in landscape mode, there are 3 registry mods needed:
1) Add string value to HKCU\Software\HTC\Manila
String: EnableLandscape Value: true
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: TF3D Value: \Windows\manila.exe
3. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: TF3D Value: Manila
Click to expand...
Click to collapse
You mean that after this hack Manilla will auto-rotate according to its orientation, or will it PERMANENTLY be in landscape mode?

Joopvan said:
"Automatically lock your Diamond 2 (from way back in the daimond days)
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked"
When I do this my device locks itself automatically after few secons even though I've set the backlight to go off after 30 seconds. Does anybody have a solution that can handle this problem?
thanks!
Click to expand...
Click to collapse
please correct your times one more at the battery settings (advanced).
jcan said:
You mean that after this hack Manilla will auto-rotate according to its orientation, or will it PERMANENTLY be in landscape mode?
Click to expand...
Click to collapse
it wil rotate according to the orientation, only one side (270deg. i think) !!

real187 said:
To use Navigon MN|7 in landscape mode, there are 2 registry mods needed:
(works for tomtom to, watch that you use the correct path/.exe and name of tomtom----audio-FIX
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Mobile Navigator Value: \Storage Card\Navigon\MobileNavigator.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Mobile Navigator Value: MobileNavigator
Click to expand...
Click to collapse
I can't get this to work for TomTom, basically I have :
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Mobile Navigator Value: \Program Files\Navigator\TomTom Audio Fix.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Mobile Navigator Value: TomTom Audio Fix
Not sure what is wrong here.

I think you have to add tomtom itself instead of the audio fix, because the audio fix loads the tomtom app.
[Edit] Just read the previous post, apparently I'm wrong.

swinster said:
I can't get this to work for TomTom, basically I have :
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Mobile Navigator Value: \Program Files\Navigator\TomTom Audio Fix.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Mobile Navigator Value: TomTom Audio Fix
Not sure what is wrong here.
Click to expand...
Click to collapse
I use a program called changescreen, it auto rotates by default but you can specifiy which apps you don't want to rotate. This works for TomTom + everything else. I didn't want to have to use an app to rotate, I'd rather have the phone take care of it but the rotate implementation on the D2 is pretty half-arsed. The reason I have to use this is because I'm left handed and tilt clockwise, htc in their infinite wisdom only tilts anticlockwise, for right handed people.

real187 said:
please correct your times one more at the battery settings (advanced).
it wil rotate according to the orientation, only one side (270deg. i think) !!
Click to expand...
Click to collapse
Tried it, but doesn't seem to work... :-(

swinster said:
I can't get this to work for TomTom, basically I have :
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: Mobile Navigator Value: \Program Files\Navigator\TomTom Audio Fix.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: Mobile Navigator Value: TomTom Audio Fix
Not sure what is wrong here.
Click to expand...
Click to collapse
For TomTom 7, take a look here : http://forum.xda-developers.com/showthread.php?t=524473
That's works with or without tomtom audio fix ;-) !
But if you don't install audio fix... audio... will not be good !!!
Enjoy...

jcan said:
Tried it, but doesn't seem to work... :-(
Click to expand...
Click to collapse
works for me perfectly, when i change the settings is uses that settings.
do you have any third-party apps installed?
swinster said:
I can't get this to work for TomTom, basically I have :
1. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName
String: TomTom Navigator Value: \Program Files\Navigator\TomTom Navigator.exe
2. Add string value to HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
String: TomTom Navigator Value: use name of process of the post above.
Not sure what is wrong here.
Click to expand...
Click to collapse
sorry i never tested this, i use G-sensor works for almost everything.
use settings above, this wil work i tried it.
infoman68 said:
For TomTom 7, take a look here : http://forum.xda-developers.com/showthread.php?t=524473
That's works with or without tomtom audio fix ;-) !
But if you don't install audio fix... audio... will not be good !!!
Enjoy...
Click to expand...
Click to collapse

Dear Real187, you could put directly process name for tom tom 7... but... thanks !!!
So, the right process name in WhiteList is : MunichWinClass

[Q] Unable to edit registry

Apologies if this has been asked before, but I am trying to update the
[HKEY_LOCAL_MACHINE\System\GDI\V1\Font Alias]
registry keys but with CE Reg Editor it says it doesn't have permission. I can edit the entries in many other places though. I've dug around a bit and the below appears to come recommended for getting round some security (particularly for some dll's and cabs), but depending on where I look the numbers are a bit different and sometimes the keys are as well. Please can someone confirm if these are the keys and whether they are all necessary.
HKEY_LOCAL_MACHINE\Security\Policies\Policies \0000 1001 = 2
Change the value data from 2 to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies \0000 1005 = 16
Change the value data from 16 to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies \0000 1017 = 128
Change the value data from 128 to 144
HKEY_LOCAL_MACHINE \Security\Policies \Policies
Add new value "0000101b": Dword = 1
Thanks!!
I've upgraded to the new 3.14 WWE ROM BTW and I don't remember having this problem before (it could be that one of the cabs I applied though made the changes for me, I'm just not sure)
UPDATE: Just found this
http://forum.xda-developers.com/showthread.php?t=373319
But I'm still not sure exactly what to do...

try - in cereg editor click tools - unlock registry

OMG thank you, that's totally it!!